How to call a stored procedure on time basis with out using sql job and GOTO

Hi,
I wanted to call a stored proc, on time basis ,
please tel me how it can be done with out using sql job , goto .
1) That is, is there any timer aviable in sqlserver.
q2) And which one is better GOTO or sql job.
yours sincerley

Raj, Check if my explanation helps you:
Your job runs every 10 seconds.
Lets say first time you are scheduling and running your job at 12:00:00 PM
Now your proc will start executing.
Say it got finished at 12:00:07.
Now the next schedule time is 12:00:10 PM.
The moment this time hits, the job will get invoked and start executing the proc.
Lets say this time it finished at 12:00:22 PM (It took 2 extra seconds)
This time the scheduled time is already gone (12:00:20 PM), thus it'll now run at the next schedule that is 12:00:30 PM.
Thus if anytime your job takes more than 10 seconds to run, it'll just miss those particular schedules overlapping with execution time. Otherwise you are good to go.
PS: A job is the best way to handle this, in your problem statement you don't need a job but that would be wrong. You have another way to do that, if you keep running your procedure all the time and the moment your timestamp hits a multiple of 10
seconds you can run your logic and then returning to the timer. But this is extremely wrong for a system. Even if your requirement is extremely transactional and complex, I would not suggest this. If the job is taking more than 10seconds (which it might if
your logics inside are complex), you should optimize your code and table architecture.
Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
The climb is all there is.

Similar Messages

How to get the line in the template (smartform) with out using under score

Hi,
     How to get the line in the template (smartform) with out using under score,
     and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
     Please provide the valueble answer as early as possible.
Thanks,
Ravi

Hi Ravi,
Line -
Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
Search SDN with Key <b>UNDERSCORE</b>.. will get few more posts on the same.
For Checkbox - refer link
Re: Quick Question on Smartforms
Re: putting tick mark into check box in smartform
Reward points if this Helps.
Manish
Message was edited by:
        Manish Kumar

How to call a stored procedure from WorkShop

Hello Everyone .. I'm quite new with WebLogic 8.1 & WorkShop, so please bare with
me .. Today I'm simply trying to find out how to call a stored procedure from
within workshop, using any of the DB Controls .. I see workshop provides a way
create a Java Control, Rowset Control, but it wont easily allow for a stored procedured
to be entered in place of the inline query .. Perhaps I've over looked it. Any
advise on the best way to tackle this task will be appreciated.
Atahualpa

Atahualpa--
Maybe this will help:
http://edocs.bea.com/workshop/docs81/doc/en/workshop/guide/controls/database/conStoredProcedures.html
Eddie
Atahualpa wrote:
Hello Everyone .. I'm quite new with WebLogic 8.1 & WorkShop, so please bare with
me .. Today I'm simply trying to find out how to call a stored procedure from
within workshop, using any of the DB Controls .. I see workshop provides a way
create a Java Control, Rowset Control, but it wont easily allow for a stored procedured
to be entered in place of the inline query .. Perhaps I've over looked it. Any
advise on the best way to tackle this task will be appreciated.
Atahualpa

How to call a stored procedure using its package name in Oracle

hi
we're doing a JDBC scenario where we call a stored procedure(a.prc) using its package name(b)The stored procedure has In /Out/IN-OUT parameter.
i have got 2 queries:
1- How to call the stored procedure using it's package.
2- How to capture the In/Out parameter in the response.

hi Prateek
thanks for the reply.
However when i tried mapping it to Package.procedure, communication channel throws the error saying that Package.proceudre needs to be declared.
As i said , the procedure has IN-OUT parameter too.In oracle we need to write a block if we want to read the IN-OUT parameter.
How to get the IN-OUT parameter in XI?

Another "How to call a stored procedure" question

Hi,
I want to call a stored procedure which returns 4 VARCHAR as a output
parameter, and use 2 VARCHAR as a input parameter. How can I do
that ?
the signature of the SP is like this
dec(
in_a IN VARCHAR2,
in_b IN VARCHAR2,
out_c OUT VARCHAR2,
out_d OUT VARCHAR2,
out_e OUT VARCHAR2,
out_f OUT VARCHAR2,
Thank You

There is an example in your wls installation, did you check that? it shows
you how to access cursor as a resultset.
<wls install dir>\samples\examples\jdbc\mssqlserver4\complexproc.java
hth
sree
"Saman" <[email protected]> wrote in message
news:[email protected]..
>
Hi,
I am using weblogic JDriver for MSSQLServer 7.0. I want to call a
stored procedure which returns a CURSOR as a output parameter. How can Ido
that ?
the signature of the SP is like this
Myprocedure (@c CURSOR VARYING OUTPUT)
Thank You,
Saman

How to call oracle stored procedure

how to call oracle stored procedure using
jdevloper.can any one help?
thanks
pullareddy

Connection conn =
DriverManager.getConnection("your connect string");
CallableStatement stm=conn.prepareCall( "{?=call getDeptName(?)}");
stm.registerOutParameter(1,OracleTypes.VARCHAR);
int deptno=10;
stm.setInt(2,deptno);
stm.execute();
String dname=stm.getString(1);
stm.close();
conn.close();
getDeptName is a function:
FUNCTION
getDeptName(id IN NUMBER) RETURN VARCHAR2...

How can i invoke a file chooser dialog box with out using input type=file

how can i invoke a file chooser dialog box with out using <input type=file> can any one help me mail me to [email protected]

You could use an applet...
Or maybe Javascript has some way to do it.

How to call a stored procedure from my JSP?

Hi to all,
          I have a very simple jsp page and a simple sql server stored procedure!
          I need to call this stored procedure by passing two parameters.
          My result set will have 4 columns.
          I would really appreciate any input on how to issue this call to a SP.
          I am new to JSP.
          Regards,
          Sam


          Sam,
          BEA provides examples that are shipped with the product under
          <beahome>\weblogic700\samples\server\src\examples\
          Look at the jsp directory for JSP examples that access a database and look at
          say the jdbc\oracle\storedprocs.java for an example of java code calling out to
          a stored procedure - - by combining one of the jsp database examples with this
          stored procedure example you should be 'good to go'
          Chuck Nelson
          DRE
          BEA Technical Support

How to call a Stored Procedure with a REF CURSOR output parameter

I am looking forward an example that call a stored function/procedure with a REF CURSOR output parameter and get the result.
In other words, I have a stored function/procedure that execute a SELECT statement using the OCI library and then it could get the values of each column and each row.
I put a code snippet, it have only the main thing to call a simple stored procedure and print the name of each column of the cursor, but I couldn´t to print out the values in the table that call the stored procedure.
I understand that the next step, it is to call a OCIStmtFetch.
How to associate the cursor with the OCIStmtFetch?
If you need more information, only tell me.
I am using ANSI C with HP-UX Operative System (C for HP-UX) and Oracle 10g.
Regards.
Antonio Garcia
/* callOracleSP */
#include <stdio.h>
#include <string.h>
#include <oci.h>
#include <stdlib.h>
char* pConnectChar ="server";
char* pUsernameChar = "user";
char* pPasswordChar = "passwd";
char* sqlCharArray1 = "BEGIN SP_GETCITIES(:s, :c); END;";
int retval;
ub4 parmcnt=0;
ub4 pos2=0;
text *pcoln[20];
ub4 namelen[20];
char state_key[5];
OCIStmt* pOciStatement;
OCIStmt* pOciStatCursor;
OCIError* pOciError;
OCIEnv* pOciEnviron;
OCIServer* pOciServer;
OCISession* pOciSession;
OCISvcCtx* pOciServiceContext;
OCIBind* pOciBind[500];
OCIParam* pOciParam;
int main()
retval = OCIEnvCreate(&pOciEnviron, OCI_DEFAULT, NULL, NULL, NULL, NULL,0,NULL);
retval = OCIEnvInit(&pOciEnviron, OCI_DEFAULT, 0, NULL);
retval = OCIHandleAlloc(pOciEnviron, (void **)&pOciError, OCI_HTYPE_ERROR, 0, NULL);
retval = OCIHandleAlloc(pOciEnviron, (void **)&pOciServiceContext, OCI_HTYPE_SVCCTX, 0, NULL);
retval = OCIHandleAlloc(pOciEnviron, (void **)&pOciStatement, OCI_HTYPE_STMT, 0, NULL);
retval = OCILogon(pOciEnviron,pOciError,&pOciServiceContext,(unsigned char *)pUsernameChar,
     strlen(pUsernameChar), (unsigned char *)pPasswordChar, strlen(pPasswordChar),
               (unsigned char *)pConnectChar,strlen(pConnectChar));
printf("OCILogon retval=%d\n",retval);
retval = OCIStmtPrepare(pOciStatement, pOciError, (unsigned char *)sqlCharArray1,strlen(sqlCharArray1),
     OCI_NTV_SYNTAX, OCI_DEFAULT);
printf("StmtPrepare retval=%d\n",retval);
retval = OCIHandleAlloc(pOciEnviron, (void **)&pOciStatCursor, OCI_HTYPE_STMT, 0, NULL);
retval = OCIBindByPos(pOciStatement,&pOciBind[0], pOciError, (ub4) 1, (void *)&state_key,
     (sb4) sizeof(state_key), SQLT_STR, (void *) 0, (ub2 *) 0, (ub2 *)0,(ub4)0, (ub4 *)0, (ub4) OCI_DEFAULT);
printf("BindByPos OCI_HTYPE_STMT retval=%d\n",retval);
retval = OCIBindByPos(pOciStatement,&pOciBind[1], pOciError, (ub4) 2, (void *)&pOciStatCursor,
     (sb4) 0, SQLT_RSET, (void *) 0, (ub2 *) 0, (ub2 *)0,(ub4)0, (ub4 *)0, (ub4) OCI_DEFAULT);
printf("BindByPos OCI_HTYPE_STMT retval=%d\n",retval);
strcpy(state_key,"CA");
retval = OCIStmtExecute(pOciServiceContext, pOciStatement, pOciError, (ub4)1, (ub4) 0,
     (OCISnapshot *)NULL, (OCISnapshot *)NULL, (ub4) OCI_DEFAULT);
printf("StmtExecute retval=%d\n",retval);
/* How to get the values of the cursor? */
/* Get number of parameters of the Cursor */
OCIAttrGet((void *) pOciStatCursor, (ub4)OCI_HTYPE_STMT, (void*) &parmcnt,(ub4 *) 0,
     (ub4)OCI_ATTR_PARAM_COUNT, pOciError);
printf("\nNumber of parameters of the cursor = %d\n",parmcnt);
for (int pos = 1; pos <= (int)parmcnt; pos++)
     OCIAttrGet((void *) pOciStatCursor, (ub4)OCI_HTYPE_STMT, (void*) &pos2,(ub4 *) 0,
          (ub4)OCI_ATTR_CURRENT_POSITION, pOciError);
     retval = OCIParamGet((void *)pOciStatCursor, (ub4)OCI_HTYPE_STMT, pOciError, (void **)&pOciParam,
          (ub4) pos );
     OCIAttrGet((void*) pOciParam, (ub4) OCI_DTYPE_PARAM,(void*) &pcoln[pos-1],(ub4 *) &namelen[pos-1],
          (ub4) OCI_ATTR_NAME,(OCIError *)pOciError );
for (int i = 1; i <=(int)parmcnt; i++)
printf("Column %i\tNAME = %.*s\n",i,namelen[i-1],pcoln[i-1]);
return 0;
This is the script that create the table, insert records and create the stored procedure
CREATE TABLE CITIES (
     STATE_CODE     VARCHAR2(2) NULL,
     CITY_CODE      NUMBER(15,5) NULL,
     CITY_NAME      VARCHAR2(30) NULL
INSERT INTO CITIES(STATE_CODE, CITY_CODE, CITY_NAME)
VALUES('CA', 30, 'SAN DIEGO')
INSERT INTO CITIES(STATE_CODE, CITY_CODE, CITY_NAME)
VALUES('CA', 40, 'SACRAMENTO')
INSERT INTO CITIES(STATE_CODE, CITY_CODE, CITY_NAME)
VALUES('FL', 10, 'MIAMI')
INSERT INTO CITIES(STATE_CODE, CITY_CODE, CITY_NAME)
VALUES('FL', 20, 'ORLANDO')
INSERT INTO CITIES(STATE_CODE, CITY_CODE, CITY_NAME)
VALUES('NY', 10, 'NEW YORK')
INSERT INTO CITIES(STATE_CODE, CITY_CODE, CITY_NAME)
VALUES('NY', 20, 'ALBANY')
INSERT INTO CITIES(STATE_CODE, CITY_CODE, CITY_NAME)
VALUES('CA', 10, 'LOS ANGELES')
INSERT INTO CITIES(STATE_CODE, CITY_CODE, CITY_NAME)
VALUES('CA', 20, 'SAN FRANCISCO')
CREATE OR REPLACE PACKAGE globalPkg AUTHID CURRENT_USER AS
/* The following are T/SQL specific global variables. */
TYPE RCT1 IS REF CURSOR;/*new weak cursor definition*/
END globalPkg;
CREATE OR REPLACE PROCEDURE SP_ADDCITY(
P_STATE_CODE IN VARCHAR,
P_CITY_CODE      IN NUMBER,
P_CITY_NAME      IN VARCHAR2,
P_RETURN IN OUT NUMBER)
AS
StoO_error INTEGER;
StoO_selcnt INTEGER;
StoO_rowcnt INTEGER;
StoO_errmsg VARCHAR2(255);
     BEGIN
StoO_rowcnt := 0;
StoO_error := 0;
StoO_selcnt := 0;
P_RETURN := 0;
INSERT INTO CITIES (STATE_CODE, CITY_CODE, CITY_NAME)
VALUES (P_STATE_CODE, P_CITY_CODE, P_CITY_NAME);
StoO_rowcnt := SQL%ROWCOUNT;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
StoO_rowcnt := 2;
WHEN OTHERS THEN
StoO_rowcnt := 0;
StoO_selcnt := 0;
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
          IF StoO_error != 0 THEN
BEGIN
               P_RETURN := 1;
     RETURN;
     END;
          END IF;
     END;
CREATE OR REPLACE PROCEDURE SP_GETCITIES(
STATE_KEY IN VARCHAR,
RC1      IN OUT globalPkg.RCT1)
AS
StoO_error INTEGER;
StoO_selcnt INTEGER;
StoO_rowcnt INTEGER;
StoO_errmsg VARCHAR2(255);
BEGIN
StoO_rowcnt := 0;
StoO_error := 0;
StoO_selcnt := 0;
OPEN RC1 FOR
SELECT STATE_CODE, CITY_CODE, CITY_NAME
FROM CITIES
WHERE STATE_CODE = STATE_KEY
ORDER BY CITY_CODE;
StoO_rowcnt := SQL%ROWCOUNT;
EXCEPTION
WHEN OTHERS THEN
StoO_rowcnt := 0;
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
     END;
/

Hi Mark,
Thanks for your recommendations.
I change the code with OCIDefineByPos, one for each parameter from cursor and then use the OCIStmtFetch.
I don´t receive a error when call OCIDefineByPos, but when I call OCIStmtFetch receive a -1 error number.
What is wrong with the code?
The script is the same.
I need your help!
Best Regards!
Antonio Garcia (Mexico)
This the new code:
#include <stdio.h>
#include <string.h>
#include <oci.h>
#include <stdlib.h>
char*   pConnectChar ="ORAC617";
char*   pUsernameChar = "C617_005_DBO_01";
char*   pPasswordChar = "Tempora1";
char*   sqlCharArray1 = "BEGIN SP_GETCITIES(:s, :c); END;";
int     retval;
ub4 parmcnt=0;
ub4 pos2=0;
sb2   *c_indp;
text *pcoln[20], *name,*name2;
ub4 namelen[20],len;
ub2 type,size;
char state_key[5];
OCIDefine        *pdef;
OCIBind          *p_bnd;
ub1          **c_buf;
OCIStmt*     pOciStatement;      /* Statement handle */
OCIStmt*     pOciStatCursor;     /* Statement handle */
OCIError*    pOciError;          /* Error handle */
OCIEnv*      pOciEnviron;        /* Environment handle */
OCIServer*   pOciServer;         /* Server handle */
OCISession* pOciSession;        /* Session handle */
OCISvcCtx*   pOciServiceContext; /* Service Context handle */
OCIBind*     pOciBind[500];      /* Bind handle */
OCIParam*    pOciParam;          /* Param handle */
int OCI_Fetch(OCIStmt *p_select,OCIError *p_err, int *piOcc)
int iOcc, rc;
rc=OCIStmtFetch(p_select,p_err,1,OCI_FETCH_NEXT,OCI_DEFAULT);
printf("rc fetch %i",rc);
if(rc==0&&piOcc!=NULL){
       printf("entro al if");
    iOcc=*piOcc;
    *piOcc=iOcc+1;
return rc;
int main()
int pos,i=0,rc;
retval = OCIEnvCreate(&pOciEnviron, OCI_DEFAULT, NULL, NULL, NULL, NULL,0,NULL);
printf("EnvCreate retval=%d\n", retval);
retval = OCIEnvInit(&pOciEnviron, OCI_DEFAULT, 0, NULL);
printf("EnvInit retval=%d\n",retval);
retval = OCIHandleAlloc(pOciEnviron, (void **)&pOciError, OCI_HTYPE_ERROR, 0, NULL);
printf("HandleAlloc OCI_HTYPE_ERROR retval=%d\n",retval);
retval = OCIHandleAlloc(pOciEnviron, (void **)&pOciServiceContext, OCI_HTYPE_SVCCTX, 0, NULL);
printf("HandleAlloc OCI_HTYPE_SVCCTX retval=%d\n",retval);
retval = OCIHandleAlloc(pOciEnviron, (void **)&pOciStatement, OCI_HTYPE_STMT, 0, NULL);
printf("HandleAlloc OCI_HTYPE_STMT retval=%d\n",retval);
retval = OCILogon(pOciEnviron,pOciError,&pOciServiceContext,(unsigned char *)pUsernameChar,
              strlen(pUsernameChar), (unsigned char *)pPasswordChar, strlen(pPasswordChar),
                (unsigned char *)pConnectChar,strlen(pConnectChar));
printf("OCILogon retval=%d\n",retval);
retval = OCIStmtPrepare(pOciStatement, pOciError, (unsigned char *)sqlCharArray1,strlen(sqlCharArray1),
             OCI_NTV_SYNTAX, OCI_DEFAULT);
printf("StmtPrepare retval=%d\n",retval);
retval = OCIHandleAlloc(pOciEnviron, (void **)&pOciStatCursor, OCI_HTYPE_STMT, 0, NULL);
printf("HandleAlloc OCI_HTYPE_STMT retval=%d\n",retval);
retval = OCIBindByPos(pOciStatement,&pOciBind[0], pOciError, (ub4) 1, (void *)&state_key,
             (sb4) sizeof(state_key), SQLT_STR, (void *) 0, (ub2 *) 0, (ub2 *)0,(ub4)0, (ub4 *)0, (ub4) OCI_DEFAULT);
printf("BindByPos OCI_HTYPE_STMT retval=%d\n",retval);
retval = OCIBindByPos(pOciStatement,&pOciBind[1], pOciError, (ub4) 2, (void *)&pOciStatCursor,
             (sb4) 0, SQLT_RSET, (void *) 0, (ub2 *) 0, (ub2 *)0,(ub4)0, (ub4 *)0, (ub4) OCI_DEFAULT);
printf("BindByPos OCI_HTYPE_STMT retval=%d\n",retval);
strcpy(state_key,"CA");
retval = OCIStmtExecute(pOciServiceContext, pOciStatement, pOciError, (ub4)1, (ub4) 0,
               (OCISnapshot *)NULL, (OCISnapshot *)NULL, (ub4) OCI_DEFAULT);
printf("StmtExecute retval=%d\n",retval);
c_buf=(ub1 **)calloc(sizeof(ub1 *),3);
c_indp=(sb2 *)calloc(sizeof(sb2 *),3);
// Get number of parameters of the Cursor
OCIAttrGet((void *) pOciStatCursor, (ub4)OCI_HTYPE_STMT, (void*) &parmcnt,(ub4 *) 0,
              (ub4)OCI_ATTR_PARAM_COUNT, pOciError);
printf("\nNumber of parameters of the cursor = %d\n",parmcnt);
for (pos = 1; pos <= (int)parmcnt; pos++)
       OCIAttrGet((void *) pOciStatCursor, (ub4)OCI_HTYPE_STMT, (void*) &pos2,(ub4 *) 0,
            (ub4)OCI_ATTR_CURRENT_POSITION, pOciError);
       retval = OCIParamGet((void *)pOciStatCursor, (ub4)OCI_HTYPE_STMT, pOciError, (void **)&pOciParam,(ub4) pos );
       // Get the column name
       OCIAttrGet((void*) pOciParam, (ub4) OCI_DTYPE_PARAM,(void*) &name,(ub4 *) &len, (ub4) OCI_ATTR_NAME,(OCIError *)pOciError );
        // Get the column datatype
       OCIAttrGet((void*) pOciParam, (ub4) OCI_DTYPE_PARAM,(void*) &type,(ub4 *)0,(ub4)OCI_ATTR_DATA_TYPE,(OCIError *)pOciError);
        // Get the column size
       OCIAttrGet((void*) pOciParam, (ub4) OCI_DTYPE_PARAM,(void*) &size,(ub4 *)0,(ub4)OCI_ATTR_DATA_SIZE,(OCIError *)pOciError);
       printf("Column %i\tNAME = %.*s \ttype %d \tsize %d\n",pos,len,name,type,size);
       // OCIDefine ByPos, one for each parameter
       // c_buf store the STATE_CODE, CITY_CODE and CITY_NAME columns from the cursor
       rc=OCIDefineByPos(pOciStatCursor,&pdef,(OCIError *)pOciError,pos,c_buf[pos-1],size+1,(ub2)type,(dvoid *)c_indp[pos-1],(ub2 *)0,(ub2 *)0,OCI_DEFAULT);
      printf("OCIDefineByPos retval=%d\n,rc);
// call OCIStmtFetch. In the next line, I receive the error
rc=OCIStmtFetch(pOciStatCursor,pOciError,1,OCI_FETCH_NEXT,OCI_DEFAULT);
printf("rc fetch %i",rc);
return 0;
{code}

How to call PLSQL Stored procedure in ADF?

Hi!
I am using adf for our development. We have existing stored packages and I want to use them. The problem is how can I call those PLSQL stored procedure in ADF.
Thanks in advance
alvin.

Hi,
a stored procedure is called by the business service. If e.g. your business service is ADF Business Components then you call a stored procedure from the Application Module's transaction. Call a PLSQL procedure using a prepared statement. Similar you call stored procedures from EJB or TopLink business services
For ADF Business Components see
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html
Frank

How to call a stored procedure from EJB3/toplink essentials..?

Hi,
I want to call a stored procedure residing in the oracle 10 g Database from my application's data access layer, which is designed using EJB3/toplink essentials.
I think this feature is not available right now in the EJB3 spec...any workaround with code if possible will be very help full...
Thanks & Regards,
Sarvesh

This should help you....
how to execute a stored procedure from ejb3.0 bean using entity manager

How to call a stored procedure from servlet?

Hi all
We are developing a project in servlet which needs to call a stored procedure in oracle 8i database.How to make a call? Whether can i get any data from the database using STORED PROCEDURE
THANKS IN ADVANCE
kamalakannan

Hello,
You can do an HTTP call from a store procedure using thre UTL_HTTP package; so you should be able to call your servlet this way.
See UTL_HTTP documentation
Regards
Tugdual Grall

How to call a stored procedure that has Table Of data types in VB6?

Hi everyone,
I need to call a stored procedure that has a Table Of data type as an input parameter (possibly even several Table Of input parameters). I can't seem to find any example of how to do this in VB6 using ODBC. Is this even possible?
Thanks you!
Steve

Thanks,
but I need to test stored procedures that uses type defined in the package.
e.g.
if I have s.p.
PROCEDURE get_risultati_squadra
( in_squadra IN VARCHAR2,
out_serie OUT tab_varchar2_5,
out_tiporisultato OUT tab_varchar2_5,
out_n_giornata OUT tab_varchar2_5,
out_squadre OUT tab_varchar2_200,
out_risultato OUT tab_varchar2_10,
out_marcatore OUT tab_varchar2_50,
out_punti OUT tab_varchar2_3,
out_rimbalzista OUT tab_varchar2_50,
out_rimbalzi OUT tab_varchar2_3,
out_esito OUT tab_varchar2_2);
I have to define every type external to the package, in this case five new TYPE !!
Is there another way to solve this problem?
Thanks

How to call a stored procedure question

Hi,
I am using weblogic JDriver for MSSQLServer 7.0. I want to call a
stored procedure which returns a CURSOR as a output parameter. How can I do
that ?
the signature of the SP is like this
Myprocedure (@c CURSOR VARYING OUTPUT)
Thank You,
Saman

There is an example in your wls installation, did you check that? it shows
you how to access cursor as a resultset.
<wls install dir>\samples\examples\jdbc\mssqlserver4\complexproc.java
hth
sree
"Saman" <[email protected]> wrote in message
news:[email protected]..
>
Hi,
I am using weblogic JDriver for MSSQLServer 7.0. I want to call a
stored procedure which returns a CURSOR as a output parameter. How can Ido
that ?
the signature of the SP is like this
Myprocedure (@c CURSOR VARYING OUTPUT)
Thank You,
Saman

How to call Packaged Stored Procedure in JDBC Adapter?

hello frnds,
I m working on a SAP R/3 -> XI -> Oracle scenario. Here on receiver side i m using JDBC Adapter in which i m using a stored procedure.
I have my stored procedure in a Package. Example : package "PKG_SPARES_VOR_UPLOAD" and in that stored procedure "pr_spares_vor_po_hdr_upload".
i have checked that if i write this stored procedure outside the package then it works fine... but if i put it into the package then it is giving me error that ....
" Receiver Adapter v2112 for Party '', Service 'BS_ORADEV':
Configured at 2006-08-16 10:12:14 GMT+05:30
History:
- 2006-08-16 11:02:04 GMT+05:30: Error: TransformException error in xml processor class: Error processing request in sax parser: Error when executing statement for table/stored proc. 'PR_SPARES_VOR_PO_HDR_UPLOAD' (structure 'statement'): java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00201: identifier 'PR_SPARES_VOR_PO_HDR_UPLOAD' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored ".
please help me out with this problem.
Thankx,
Regards,
Audumbar

Hi,
I have the same problem to call a stored Procedure in a Package.
If my procedure is not in a package, everything is right.
And I musn't indicate all the name, because I musn't put '.' in the name (of the procedure), in my DT on XI.
It would be so nice to have an answer.
Rémi

How to call a stored procedure on time basis with out using sql job and GOTO

Similar Messages

Maybe you are looking for