How to call  an abap report in BSP..

hi all,
Please can anybody tell me how to call an abap report in BSP application.....since I am new to BSP....
with regards,
Santosh

check this thread
Urgent!!  How to call a custom transaction or an ABAP program in BSP?

Similar Messages

  • How to call a abap report in BSP

    hi all,
    Please can anybody tell me how to call abap report in BSP..
    with regards,
    Santosh.

    Also see below BSP tutorial
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/content.htm
    Regards.

  • How to Call general ABAP Report in WDA?

    Hi All,
    Is it possible to run our general ABAP report in our WDA.
    If yes how can i move....
    Thanks & regards,
    Ravi

    David Pietroniro wrote:
    > Hello,
    >
    > You can call your report using the SUBMIT command to call it like a job. Follow an example on how to do this (from ABAP Help).
    > But this is only usefull if this report only process data and don't show data on screen, because this data can´t be showed in the web dynpro via write commands like described in the threads before.
    >
    > Regards.
    Actually with a few changes you are close to a solution here.  There is way to get the output of the report and convert it to HTML.  You will need to have a little wrapper application around your report. You will have to run this wrapper as a background job or via RFC (pointing to destination NONE). Here is a sample:
    * SELECTION SCREEN LAYOUT                                              *
    selection-screen begin of block two with frame title text-002.
    parameter: prog like sy-repid.
    parameter: vari1 like raldb-variant.
    selection-screen end of block two.
    .....Other Processing....
    submit (prog) and return
               exporting list to memory
               using selection-set vari1.
      call function 'LIST_FROM_MEMORY'
           tables
                listobject = itab
           exceptions
                not_found  = 1.
      if sy-subrc ne 0.
        leave program.
      endif.
      call function 'WWW_HTML_FROM_LISTOBJECT'
       exporting
    *    REPORT_NAME         =
         template_name       = 'WEBREPORTING_REPORT'
        tables
          html                = html_tab
          listobject          = itab.
    Once the data is converted into HTML it is more usable from WD.  You can't really display it directly within WD, but you could push it out as a file attachment from WD using cl_wd_runtime_services=>attach_file_to_response.
    This is a lot of work and I still think it might be easier to fire a linkToURL or Exit Plug and navigate to the ITS/WebGUI.

  • How to call the abap program in workflow

    HI Exeprts,
    I need to call one abap program in workflow.
    can any tell me how to call the abap program in workflow.
    thanks &regards
    ramesh

    Dear Ramesh,
    U can use REPORT business object.
    Method : EXECUTE_2
    Regards,
    Sagar

  • Calling an ABAP Report from the Web

    Hello all,
    Is there a way in WAD to have a web link call an ABAP report?  I am trying to provide a link in my web template to allow users to launch the BEx Analyzer.  When I look at transaction RRMX in the GUI, it appears to be calling the ABAP report RRMX_START_EXCEL.  Can I use BSP to accomplish this?
    Thanks in advance for any help you can provide,
    Chris

    OK, here is the code for my BSP page:
    <%@page language="abap"%>
    <%@extension name="htmlb" prefix="htmlb"%>
    <html>
    <% submit RRMX_START_EXCEL and return. %>
    </html>
    When I attempt to test it, however, I am receiving the following error:
    The following error text was processed in the system BWS : Screen output without connection to user.
    The error occurred on the application server sapbwsci_BWS_35 and in the work process 5 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Module: SEND_TAB of program SAPLGRAP
    Function: GRAPH_RECEIVE of program SAPLGRAP
    Function: REGISTRY_GET of program SAPLGRAP
    Form: PREPARE_LAUNCHER of program SAPLRSAH
    Function: RSAH_LAUNCH_EXCEL of program SAPLRSAH
    Form: START_EXCEL of program RRMX_START_EXCEL
    START-OF-SELECTION of program RRMX_START_EXCEL
    Any ideas??
    Thanks again!!

  • How to call a abap program ?

    Can anyone tell me how to call one abap program in another abap program ??

    Hi,
    You can use <b>submit</b> statement to achieve the same.
    Sample Code
    REPORT ZREP2 NO STANDARD PAGE HEADING.
    tables: qals.
    RANGES seltab for qals-prueflos.
    WRITE: 'Select a Selection!',
    SKIP.
    FORMAT HOTSPOT COLOR 5 INVERSE ON.
    WRITE: 'Selection 1',
    / 'Selection 2'.
    AT LINE-SELECTION.
    CASE SY-LILLI.
    WHEN 4.
    SUBMIT zrep1 VIA SELECTION-SCREEN
    WITH PARAMET EQ 'Selection 1'
    WITH SELECTO IN SELTAB
    WITH SELECTO NE 3
    AND RETURN.
    WHEN 5.
    SUBMIT zrep1 VIA SELECTION-SCREEN
    WITH PARAMET EQ 'Selection 1'
    AND RETURN.
    ENDCASE.
    Message was edited by: Jayanthi Jayaraman

  • How to Call a Crystal Report from Form 6i?

    Dear All,
    Can anybody tell me how to call a crystal report, designed using Crystal Report 9, in form 6i? I tried one solution by using the host command but it was not working properly. The code I was tried is like:
         f_name varchar2(240);
         f_name :='C:\Program Files\Crystal Decisions\Crystal Reports 9\crw32.exe D:\Form16\Form16_Rep\bin\Debug\Form_16_character_emp.rpt';
                   host(f_name);
    This open the crystal report in design view. So how we call a report which run automatically like in .Net. How to pass the connection info of the database schema?
    Thanks & Regards
    Sunil

    Hi
    First see the built in run_product function.
    You can create a parameter list, add the
    "MAXIMIZE" paramter in it and then call your
    report with run_product passing your parameter list in it.
    hence the called report will be maximized.
    null

  • How to Call a jasper report from Oracle Forms 6i.

    Hi
    Can anybody tel me how to Call a jasper report from ORacle Forms 6i.
    Thanks & Regards
    Bango

    Forms 6i client/server? Use the HOST command to call the report. Since a Jasper report is just a call to a url, it will be something like:
    v_url := '<your url to the report>';
    host ('cmd /c start '||v_url);If it's web Forms 6i it even easier. Just use web.show_document(<url>).

  • How to call a detail report from a master report in 11g?

    How to call a detail report from a amster report in 11g?
    We have a requirement to call a detail report based on the invoice id that will parsed from the master report in OBIEE 11g. Any ideas sugegstions will be greatly appreciated.
    Thanks,
    Edited by: user8957415 on Jul 31, 2012 9:04 AM

    Check these links
    http://gerardnico.com/wiki/dat/obiee/master_detail
    http://prasadmadhasi.com/2011/11/13/master-detail-event-in-obiee-11g-and-pass-multiple-events-to-one-detail-report/
    Hope these helps

  • How to call a Webdynpro view from BSP page (MVC) in a new window?

    Dear Experts,
    kindly advise how to call a webdynpro view from BSP application after performing an event (through button or hyper link).
    Regards,
    Sarat.

    Hi,
    This has been discussed many times in several forums.
    Please check the method CL_WD_UTILITIES=>CONSTRUCT_WD_URL, to create a runtime url for your WD Application and call this URL.
    Refer thread: Call Webdynpro Application from BSP Application
    Hope this will be useful!
    Regards,
    Meganadhan S

  • How to shedule an abap report to run paralely in more background session

    I wander how to shedule an abap report to run paralely in more background session.
    I am afraid of parallel locking.

    Hi,
    You can schedule different jobs with same program name.
    Use ENQUEUE_ & DEQUEUE_ to lock/unlock the records being process. The lock objects can be created in SE11.
    Best regards,
    Prashant

  • How to call PBO in reports

    hi
    how to call PBO in reports

    <b>Whenever you are using CALL SCREEN <number> in your report,
    double click on <number> and then in the FLOW LOGIC,
    uncomment the PBO OUPUT, double click and then use it.</b>
    here's a sample code....
    *&      Module  STATUS_0100  OUTPUT
          PBO Event
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'OOPS'.
      SET TITLEBAR 'TIT'.
    Subroutine to fill the Variant Structure
      PERFORM FILL_VARIANT.
      IF W_GRID IS INITIAL.
        CREATE OBJECT W_GRID
          EXPORTING
       I_SHELLSTYLE      = 0
       I_LIFETIME        =
            I_PARENT       = CL_GUI_CONTAINER=>SCREEN0
       I_APPL_EVENTS     =
       I_PARENTDBG       =
       I_APPLOGPARENT    =
       I_GRAPHICSPARENT  =
       I_NAME            =
       I_FCAT_COMPLETE   = SPACE
          EXCEPTIONS
            ERROR_CNTL_CREATE = 1
            ERROR_CNTL_INIT   = 2
            ERROR_CNTL_LINK   = 3
            ERROR_DP_CREATE   = 4
            OTHERS            = 5.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                     WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.                             " IF SY-SUBRC <> 0
        CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
          EXPORTING
           I_BUFFER_ACTIVE               =
           I_BYPASSING_BUFFER            =
           I_CONSISTENCY_CHECK           =
           I_STRUCTURE_NAME              =
            IS_VARIANT                    = W_VARIANT
            I_SAVE                        = 'A'
           I_DEFAULT                     = 'X'
           IS_LAYOUT                     =
           IS_PRINT                      =
           IT_SPECIAL_GROUPS             =
           IT_TOOLBAR_EXCLUDING          =
           IT_HYPERLINK                  =
           IT_ALV_GRAPHICS               =
           IT_EXCEPT_QINFO               =
           IR_SALV_ADAPTER               =
          CHANGING
            IT_OUTTAB                     = T_OUTTAB
            IT_FIELDCATALOG               = T_FIELDCAT
           IT_SORT                       =
           IT_FILTER                     =
          EXCEPTIONS
            INVALID_PARAMETER_COMBINATION = 1
            PROGRAM_ERROR                 = 2
            TOO_MANY_LINES                = 3
            OTHERS                        = 4
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                     WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.                             " IF SY-SUBRC <> 0.
      ENDIF.                               " IF W_GRID IS INITIAL
      CREATE OBJECT W_EVENT_CLICK.
      SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
    ENDMODULE.                             " STATUS_0100  OUTPUT
    Regards,
    Pavan

  • Calling an ABAP Report from ITS

    Hi,
    I am new to ITS and we have requirement, where i have to call an ABAP Report with selection screen.
    Now my question is where to put the code to execute the report and what is the syntax?
    Any suggestions/documentation would be of a great help.
    Regards,
    Lalith

    Hi Lalith,
    Just pass the Tcode after the webgate followed by ! mark.
    http://hostname:portno/scripts/wgate/<b>ztest!</b>
    Rgds,
    Jothi.P

  • How to create a ABAP report off of SRM box for live data?

    How to create a ABAP report off of SRM box for live data?
    Thanks in advance.
    York.

    you can try infoset query:
    STEP - A:
    1. Go to T Code RSQ02 and give the InfoSet name & select CREATE.
    2. Provide the Name(Description) and Data Source i.e. for eg here i take "DIRECT READ OF TABLE" = /BIC/AODS100. Then CONTINUE.
    3. Select what to Include in the 3 options available with the POPUP, here "INCLUDE ALL TABLE FIELDS". Then Check the fields and click GENERATE(one RED and WHITE round icon).
    4. Now provide the PACKAGE for the INFOSET. Come Back(F3).
    STEP - B: optional(If u want to create a new user group)
    1. Select ENVIRONMENT -> USER GROUPS. Provide the User Group name and CREATE.
    2. Provide Description and SAVE.
    3. Provide PACKAGE and SAVE. Come Back (F3) to the Initial Screen.
    4. Click Role/User Group Assignment. Select Newly Created User Group or an existing one. Then SAVE (CTRL + S). F3.
    STEP - C:
    1. Select ENVIRONMENT -> Queries. Provide the query name and CREATE.
    2. Select the INFOSET u have created and assigned the user group.
    3. Provide the Title and Select BASIC LIST. There you have to select (check) the fields you want to display, SAVE and then TEST. It will ask for Variant, just CONTINUE.

  • How to find existed abap reports?

    how to find existed abap reports?

    Hi abapdoubts,
    on wich time do you want to find?
    In runtime? Than sy-repid.
    on dialog?  take F1 with further Infoemation.
    On the GUI on the riht_button corner, there are somw Information too.
    regards, Dieter

Maybe you are looking for

  • Serial numbers from PO(ME21N) to be updated in standard VL10B deliveries

    Hi, New to enhancements and need help. I have Purchase Orders created in ME21N. But material specific serial numbers are entered in Texts as this enhancement wasn't implemented prior prod release. Now we needed seralization to be implemented. Configu

  • Open in a new window.

    I created one jsp page with One input field and a submit button. once user enter some data into the input filed and click submit button, it will go to the database and will display the matching information on the same window. My peoblem is, once user

  • Depreciation is not executed for last month and the period is closed. Giving Error in this Dep. Cycle.

    Hi All, We had a month End scenario where the depreciation for a company code is not executed for the last month and closed the period without checking it. While  running the Depreciation posting for this month we encounted a error that last motn per

  • Albums that aren't compilations, sorted as compilations...

    Some albums that I downloaded for some reason are put in the compilations section of my iPod and I don't know why. I've tried going to the compilations folder and moving them out, but it still stays in the compilations section on my iPod... help plea

  • Cannot install Quick time 7 on Windows

    hi everyone. I am having a hard time installaing quick time version 7 on my windows XP SP2. Installer kicks off and after 5 seconds, I get messange "another process is running. terminate" or something like that. I am not running any other processes.