How to call business transaction in Ic Web

Hi,
I added a lead transaction in IC Web Navigation bar..
Through trasaction launcher i have added that to navigation bar .
As per my knowledge i have done the correct functionality. But when i am trying to call the trasaction in the IC Web portal, i got one error i.e "Execution not possible, Data flow errors".
I am very new to IC Web, Just i have taken training on Ic Web..
To get the transactions in the IC web portal, Do we need to install any other componets?
As per my training knowledge i have done the entire functionality.
Any body can tell how can i call the transactions in IC Web Portal,
It is very urgent..
Regards,
Venu.

Hi Venu,
Plz surf through the link
http://help.sap.com/saphelp_crm40/helpdata/en/12/c3e68620514b499c06b8eb26874424/frameset.htm
Best Regards,
Pratik Patel
Reward with Points!

Similar Messages

To get the business transaction in IC Web client

Hi,
I added a lead transaction in IC Web Navigation bar..
Through trasaction launcher i have added that to navigation bar .
As per my knowledge i have done the correct functionality. But when i am trying to call the trasaction in the IC Web portal, i got one error i.e "Execution not possible, Data flow errors".
I am very new to IC Web, Just i have taken training on Ic Web..
To get the transactions in the IC web portal, Do we need to install any other componets?
As per my training knowledge i have done the entire functionality.
Any body can tell how can i call the transactions in IC Web Portal,
It is very urgent..
Regards,
Venu.

Hi manuel,
I have assigned the "CL_CRM_IC_ABOXSAMPLE_LEAD_PRO" class in the Launch transaction.
But in the output, it is displaying that in display mode, even i could not be able search the lead transactions(PCUI transactions).
for my userid "SAP_PCC_IC_AGENT" role has been assigned
but didnt get the screen in edit mode.
When i click the "Lead" in the navigationbar, first it is showing the error that is
"Execution is not Posiible, Data flow error". when again i click on the same "Lead" link, then i am getting lead search screen that would be in display mode only.
could you help me on this issue, it is very urgent
Thanks in Advance,
Regards,
Venu

How to call business workflow in PI?

Hi,gurus:
How to call business workflow in PI and vice versa? Can I implement it using idoc adapter or RFC adapter?Or is it possible to expose the workflow to a web service?
Any help will be appreciated.

xinjiang li ,
>is it possible to expose the workflow to a web service?
Yes
What is your actual requirement,
Cheers
Agasthuri

How to call business service from xquery transformation in OSB ??

Hi All,
How to call business service from xquery transformation in OSB ??
I need to assign the response variable of Business Service to a target element in XQuery Transformation Mapper file.
It's urgent.
Regards,
Jyoti Nayak

Transformation is to mapping the source and target of 2 different schemas.
In your case you should have a XQuery transformation between, your Business Service output schema and the target schema.
Thanks,
Vijay

How to call a transaction with a variant

Hi all
I created a bdc program after updating it should call another transaction with predefined variant that that transaction program is of type module pool.
can anyone tell me the syntax how to call a transaction with a variant.

Hi
goto Tcode SHD0
enter the Tcode for which Tran Variant has to be created(dialog Tcode)
enter Trans variant to be created
press create button
it will go through all the screens of that Tcode and save
and modify the fields as per requirement
we can create Transaction Variants Using SHD0 Transaction.
Transaction Variants and Screen Variants
Transaction variants can simplify transaction runs as they allow you to:
Preassign values to fields
Hide and change the 'ready for input' status of fields
Hide and change table control column attributes
Hide menu functions
Hide entire screens
In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions).
Regards
Anji

How to call CJ2ON transaction

Hi All,
How to call CJ20N transaction from custom transaction/custom program.
generally some transaction having OPEN functionality for open other project,how to handle these type of transaction.
Help me.
Thanks,
Srinivas Manai

Hi,
You can neither do CALL TRANSACTION nor use BDC session method for transaction CJ20N. This is a enjoy transaction and it works on Object oriented technology. These kind of transactions ( ME21N, ME22N, KE23N, ME51N etc..) does not support CALL TRANSACTION.
Use transaction CJ20 instead.
Let me know your exact requirement, there may be an alternative to CALL TRANSACTION or BDC.
Regards,
RS

How to call legacy system screen in web dynpro for java?

Now I'm using Netweaver CE for building BPM (Business Process Management).
In BPM system, I wana call legacy system screen(ERP, C/S , Web, etc..) in web dynpro.
I'v already known how to call legacy system method and data.( using RMI, SOAP and RFC )
But I don't konw how to call legacy system screen.
If there is no way calling legacy system screen, I will have to build every screen using web dynpro.
It's so terrible.
So I think there is a way calling legacy system screen.
It's just my opinion.
If It can call legacy system screen in web dynpro, please let me know how to call it.
Or, If there is no way calling legacy system, how solve I this problem?
Thank you reading my question.

I assume that with "legacy system screen" you mean ABAP Dynp sceens. Of cause it would be attractive to integrate into new BPM processes. However there is a conceptional issue: You could easily integrate them e.g. into a WebDypro using a URL to to the so-called WebGUI (the ITS that makes Dynp screens Web enabled).
However the Dynp screen store all there state in the ABAP backend. This information is not available to to the process engine, e.g. to set the Task to completed or to use the data in Output Mapping.
In fact you need a way to wrap the how UI transaction into a WebDynpro screen including data flow.

How to call activity Trnsaction in Ic Web....

Hi,
I am very new to IC Web client, and i want to know how to call an activity in Ic webclient,
Generally we can call Lead, Opportunity ....Through transaction launcher....(Navigation bar)
but we can't call Activity through transaction launcher, Then how can i get this activity transaction in Ic web...For this what are the settings i have to do...
Thanks in advance..
Regards,
Venu.

Hi Venu,
Plz surf through the link
http://help.sap.com/saphelp_crm40/helpdata/en/12/c3e68620514b499c06b8eb26874424/frameset.htm
Best Regards,
Pratik Patel
Reward with Points!

How to trigger Business Transaction Event "WEIGH" in WM?

How to trigger the Business Transaction Event "WEIGH" in WM from a user program?
This "WEIGH" Business Transaction Event is supposed to modify the status in "status Management System" of SAP.
Appreciate some feedback.

Hi Ashutosh, if you are trying to raise a custom event you first must define the event within your business object, using TC SWO1. If you like you can extend an existing business object or create a new one. Once your business object is activated and your event is released you should be able to trigger it with the FM 'SWE_EVENT_CREATE'.
P.S If you are extending an existing business object, for example BUS2105 and your extended name is ZMBUS2105, refer to the original name, i.e. BUS2105 for the objtype field in the call to 'SWE_EVENT_CREATE'.
Hope that helps,
Kevin

How to call 2 transactions in a single screen

Hi All,
I need to call 2 Standard transaction in a single screen.
ie: 1 transaction should be displayed in first half of the sceen and another transaction should be in the next half. How we can do this.
Thanks
Partha.

Attach two subscren in that screen and call the transactions from the seperate subscreens.

How to call a transaction from ABAP code

Hi everybody,
How do I run a transaction from my ABAP code?
For example, through my ABAP code, I want to call the ME24 transaction (Maintain Purchase Order).
Thanks for the help,
Roy

CALL TRANSACTION
Syntax
CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
 | [USING bdc_tab [bdc_options]] }.
Extras:
1. ... AND SKIP FIRST SCREEN
2. ... USING bdc_tab [bdc_options]
Effect
The statement CALL TRANSACTION calls the transaction whose transaction code is contained in data object ta. The data object ta must be of character type and must contain the transaction code in uppercase letters. If the transaction specified in ta cannot be found, an untreatable exception is triggered. The additions suppress the display of the initial screen and allow you to execute the transaction using a batch input session.
At CALL TRANSACTION the calling program and its data is kept, and after exiting the called transaction, processing is resumed in the calling program after the call.
When the transaction is called, the ABAP program linked with the transaction code is loaded in a new internal session. The session of the calling program is kept. The called program runs in an SAP LUW of its own.
If the called transaction is a dialog transaction, after loading the ABAP program the event LOAD-OF-PROGRAM is triggered and the dynpro defined as initial dynpro of the transaction is called. The initial dynpro is the first dynpro of a dynpro sequence. The transaction is finished when the dynpro sequence is ended by encountering the next dynpro with dynpro number 0 or when the program is exited with the LEAVE PROGRAM statement.
If the called transaction is an OO transaction (as of release 6.10), when loading all programs except class pools the event LOAD-OF-PROGRAM is triggered and then the method linked with the transaction code is called. If the method is an instance method, implicitly an object of the corresponding class is generated and referenced by the runtime environment. The transaction is finished when the method is finished or when the program is exited using the LEAVE PROGRAM statement.
After the end of the transaction call, program execution of the calling program resumes after the CALL TRANSACTION statement.
Note
At the statement CALL TRANSACTION, the authorization of the current user to execute the called transaction is not checked automatically. If the calling program does not execute a check, the called program must check the authorization. To do this, the called program must call function module AUTHORITY_CHECK_TCODE.
Addition 1
... AND SKIP FIRST SCREEN
Effect
This addition suppresses the display of a screen of the initial dynpro of a called dialog transaction. The addition AND SKIP FIRST SCREEN suppresses the first screen under these prerequisites:
For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number.
All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters
If these prerequisites are met, that screen of the dynpro is displayed that is specified in the Screen Painter as the next dynpro of the initial dynpro.
Example
If the static next dynpro of the initial dynpro of the called dialog transaction FLIGHT_TA is not the initial dynpro itself, its screen is suppressed, because its input fields are filled using the SPA/GPA parameters CAR and CON.
DATA: carrid TYPE spfli-carrid,
 connid TYPE spfli-connid.
SET PARAMETER ID: 'CAR' FIELD carrid,
 'CON' FIELD connid.
CALL TRANSACTION 'FLIGHT_TA' AND SKIP FIRST SCREEN.
Addition 2
... USING bdc_tab [bdc_options]
Effect
Use this addition to pass an internal table bdc_tab of row type BDCDATA from the ABAP Dictionary to a dialog transaction. The additions bdc_options control the batch input processing. When a transaction with addition USING is called, the system field sy-binpt is set to value "X" in the called program - while this transaction is running, no other transaction can be called with this addition.
The internal table bdc_tab is the program-internal representation of a batch input session and must be filled accordingly. The structure BDCDATA has the components shown in the table below.
Component Description
PROGRAM Name of the program of the called transaction
DYNPRO Number of the dynpro to be processed
DYNBEGIN Flag for the beginning of a new dynpro (possible values are "X" and " ")
FNAM Name of a dynpro field to be filled or batch input control statement, for example, to position the cursor
FVAL Value to be passed to the dynpro field or to the control statement
Using the internal table bdc_tab, you can provide any number of screens of the called transaction with input and user actions.
System Fields
sy-subrc Description
0 The batch input processing of the called transaction was successful.
< 1000 Error in the called transaction. If within the transaction a message was sent, you can receive it using the addition MESSAGES.
1001 Error in batch input processing.
Note
Outside of ABAP Objects you can specify the additions AND SKIP FIRST SCREEN and USING together. However, this does not make sense, because the addition AND SKIP FIRST SCREEN is desigend only to fill the mandatory input fields using SPA/GPA parameters, while the batch input table specified with USING controls the entire transaction flow including the display of the screens.
Example
Call of the Class Builder (transaction SE24) and display of class CL_SPFLI_PERSISTENT. The internal table bdcdata_tab contains the input for the batch input processing of the first dynpro (1000) of the transaction. Using structure opt, the batch input processing is set to suppress the first screen and to display the next screen in the standard size.
DATA class_name(30) TYPE c VALUE 'CL_SPFLI_PERSISTENT'.
DATA: bdcdata_wa TYPE bdcdata,
 bdcdata_tab TYPE TABLE OF bdcdata.
DATA opt TYPE ctu_params.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLSEOD'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'SEOCLASS-CLSNAME'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'SEOCLASS-CLSNAME'.
bdcdata_wa-fval = class_name.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=CIDI'.
APPEND bdcdata_wa TO bdcdata_tab.
opt-dismode = 'E'.
opt-defsize = 'X'.
CALL TRANSACTION 'SE24' USING bdcdata_tab OPTIONS FROM opt.

How to see system status in spro. How to assign business transaction to user status.

Hi All,
How to see system status in spro. can we change system status in spro for maintenance order.kindly share.
Also share how can we assign business transaction to user status for maintenance order

Peter,
You cannot see the system-status in SPRO.
You can view the system-statuses via BS23.
Be warned - it is NOT advisable to change the system-status setting as you may screw-up your system. Remember that many statuses are used across multiple objects and multiple modules.
PeteA

How to obtain Business Transaction Management ?

I'm new to OEM, so I think I'm confusing myself ! How do I download the Business Transaction Management product ? As I read the Oracle documentation it sounds like a separate product - perhaps I am wrong about that ?
Thanks in advance for any advice !
Edited by: warelock on Dec 28, 2010 10:22 AM

Thanks, guys. I was able to download the BTM products.
It is interesting - all of the documentation from these sources refers to a version of AmberPoint. Based on the latest BTM Installation Guide (Dec 2010), the architecture appears to have changed - there are Monitors and Observers rather than apContainers and apProxyNodes and nano-agents. I'm not sure if this is a real architecture change or just a different way of describing the products.

How to call a transaction (in a new session) from a program

Hi ,
I need to call a transaction from my report on the click of a button in toolbar.
But the transaction should open in a new session.
This is the code that i have written, MM03 is getting opened in the same session.
call transaction 'MM03' and skip first screen.
Hope that my question is clear.
Thanking you in advance..
Shankar

check this
CALL FUNCTION 'ABAP4_CALL_TRANSACTION' STARTING NEW TASK 'TEST'
DESTINATION 'NONE'
EXPORTING
 TCODE = 'SM59'
EXCEPTIONS
 COMMUNICATION_FAILURE = 1 MESSAGE MSG_TEXT
 SYSTEM_FAILURE = 2 MESSAGE MSG_TEXT.
IF SY-SUBRC NE 0.
 WRITE: MSG_TEXT.
ELSE.
 WRITE: 'O.K.'.
ENDIF.
u can avoid such errors thru this FM
check FI_DUPLICATE_INVOICE_SHOW program for sample code.
regards
Prabhu
Message was edited by: Prabhu Peram

How to Restrict Business Transaction Types in Cash Journal

Dear All
I need to Restrict Business Transaction Types in Cash Journal based on Exp/Revenue Types . Is there nay solution of this problem and one more thing i need to disable/hide Cash Hournal Tabs for specific User.
Full point will be awarded.
Thanks

hi
the follwoing links may helpful to you for cash journal configs.
http://help.sap.com/bp_bblibrary/500/documentation/N70_BPP_04_EN_DE.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/e9d13973da1f60e10000000a114084/content.htm
http://www30.sap.com/japan/businessmaps/690A1366EABD4B029F9F9CB727553B61.htm
nagesh

How to call business transaction in Ic Web

Similar Messages

Maybe you are looking for