How to call discoverer report with parameters over http link?

Hi!
I'm using oracle application server 9.0.4 (incl. discoverer).
I have an oracle portal report where I want to call a discoverer report for each line over a http link. It is always the same discoverer report - with each line I want to pass parameters to my discoverer report.
How can I pass parameters to the report? Is there another way rather than using GET parameters?
Thanks
Markus

Hi Markus
You need to determine whether you can in fact call a Discoverer report using a URL before linking it in Portal. You need to run the report in Viewer first and then see copy the URL from the address line of the browser. Then you open another browser and paste the URL. You may well be prompted for a username and password but hopefully the correct report with the right parameters will then execute.
Assuming this works you then paste the same URL link into Portal and you should be able to get the report to run.
Best wishes
Michael

Similar Messages

How to call PDF Report with parameters in jdeveloper 10.1.3

Hi all,
how to call PDF Report with parameters in jdeveloper 10.1.3
for example I have Report name is repdept.pdf with parameter as deptno
and I want call this Report from JSP page ?
thanks
frank

Hi all,
how to call PDF Report with parameters in jdeveloper 10.1.3
for example I have Report name is repdept.pdf with parameter as deptno
and I want call this Report from JSP page ?
thanks
frank

How to call standard report with in zprogram?

Hi Sap experts,
How to call standard report with in zprogram.
For example if country is 'US' then call Zprogram(zprog_US).Inside zprogram call standard report(rhecm_change_proc_status).If country is 'CA' then call zprogram.Inside zprogram call standard report.For same othercountres like 'PR','GB','ES'.Actually HR_ECM_READ_FEATURE_CARGP will having the input as employee id and will return the CAREA(County like 'US','PR'......).Kindly help me what is the procedure?
Regards,
Sujan

>
sujan T wrote:
> Thanks for your reply.
>
> What is the logic to call the standard report from zprogram?Inside the zpogram how to call standard report?
>
> Regards,
> Sujan
no special logic is required
If u want to use
RPUAUDOO IN THE ZREPORT.
Put the submit button where ever required
ex: In zreport after certain process reacedu want to call then use
submit rpuaudoo and return.
Regards
Sas

Discoverer report with parameters and functions

I am new to Discoverer. Is there a way to create a report (with parameters) of one line per customer such that the following data will be displayed for each customer?
Among the parameters is: from_date (month & year) ,to_date
The basic query gives totals for each date (month & year) for every customer.
Among the fields displayed:
1-customer_id,
2-balance until from_date,
3-total activity between from_date and to_date
I have a function to calculate the total balance until from_date, but then I cannot get the total activity on the same line. I tried using another function and I tried using a total calculation but to no success.
Is this possible?
Thanks.

Hi Markus
You need to determine whether you can in fact call a Discoverer report using a URL before linking it in Portal. You need to run the report in Viewer first and then see copy the URL from the address line of the browser. Then you open another browser and paste the URL. You may well be prompted for a username and password but hopefully the correct report with the right parameters will then execute.
Assuming this works you then paste the same URL link into Portal and you should be able to get the report to run.
Best wishes
Michael

How to call web service with parameters?

Hi
I'm testing a distributed architecture where parameters are queried from an ODBC database, and a web service called with resulting parameters as input, returning a computed result to the integrated Crystal report. I'm unable to successfully associate the database fields with the web service parameters - the web service is always called with empty parameters. When I call the web service manually from CR by entering parameters, it works as expected. I'm using a sub-report with fields linked to the main report.
Has anyone done something like this / know how to correctly link database fields with web service parameters?
Help much appreciated,
Lance

An update - I solved this problem as follows:
In CR Design view, right-click on sub-report object, select 'Change Subreport Links'. In the links dialog, transfer database fields into 'Field(s) to link to' list. Select a field in 'Field(s) to link to' and in 'Subreport parameter field to use' below, map the field to the appropriate web service parameter field in the dropdown.
Tested with version 11.5.8.826.
- Lance

How to configure discoverer reports with apps

Hi,
i developed a report in discoverer desktop.now i want to link or run the report in apps.
how do i configure this ...
can u help me out ..
regds,
kumar

hi ,
i gone through that note its very helpful to me ..
but i have a doubt .the discoverer reports are opening with Discoverer viewer 4i.how its automatically taking the viewer to open..
whether viewer is a tool(like admin&desktop or ???) . by default its available in application or whether we have to install or apply any patch or ...
and also i tried to open existing(seeded) reports in application through disk desktop its giving the message subtitute item ....
should i replace the existing item (in created workbook) with the new one (which we need)....
pl u clarify me
regards,
kumar

How to call a report with a bind variable from a multi-record block

Hi,
I have created a report using the BI Publisher functionality. I did all the integration, created the SQL Query and uploaded the template. Up till here everythings fine!
My SQL Query has 2 bind variables.
I will call my report from a multi record block, at the end of each record an icon is shown which the user can click to open the report.
I created a column link for this item (PRINT_REPORT=Inschrijvingsformulier) but I do not manage to pass the parameters to my report. The parameters I want to pass are 2 columns in this Multi Record block.
I created 2 hidden fields on the page P9_PARAMETER1, P9_PARAMETER2 with the same names as my bind variables and fill this in with the values #PARAMETER1#, #PARAMETER2# from the multi record block.
It seems it does not work as my report stays empty. (also XML file stays empty).
Am I trying the wrong way?
Thanks for any advice,
Kris

hi khadeer,
create one report program and write the required code,and call this function module 'SSF_FUNCTION_MODULE_NAME' and give your smartform name and also when u activate ur smart form u will get one function module call that function module also and specify any tables used...
i think this solves ur problem...
any queries revert back..
pls reward points if helpful,
shylaja

How to call a function with parameters in ScriptStart function

i am trying to call ScriptStart function from SUD dialog. This is how iam calling Call ScriptStart(path & "test.vbs","abc") abc is function which is written test.vbs. It is working. But when i want to pass some parameters to the abc function of test.vbs. It is not working why. can anybody suggest where i went wrong. I am calling the same function as Call ScriptStart(path & "test.vbs","abc(" & text1.Text & ")"). It is not working why ? Is the ScriptStart function only point to functions. it does not take any parameters or waht ?

Hi abc421,
Another option in addition to UserCommands would be to use ScriptInclude(path). If you execute a ScriptInclude(path) command at the beginning of your VBScript, then all the functions and Subs in the VBscript located at "path" are now available to you-- including passing parameters and receiving return values from functions. If you are calling a VBscript that uses only VBScript variables, then this is the preferred method.
If instead you are calling a VBScript that uses global DIAdem variables declared in a VAS file (their variable names all end with the "_" character), then those parameters are already available at the subroutine called with ScriptStart(path, routine).
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to call stored procedure with parameters?

I created a stored procedure in db like:
CREATE PROCEDURE dbo.MySP
@name varchar(50),
@access_date datetime
AS
BEGIN
--insert data into a table
End
Then I create pb function to call this sp like( I use pb 11.5)
datetime ll_date
ll_date =datetime(today(), now())
DECLARE mytest PROCEDURE FOR MySP @objname = :is_name, @access_date = :ll_date USING is_tran;
IF is_tran.SQLCode <> 0 THEN
      MessageBox ( "Error", "DECLARE failed" )
      RETURN
END IF
EXECUTE mytest;
IF ( is_tran.SQLCode <> 0 ) and ( is_tran.SQLCode <> 100 ) THEN
      MessageBox ( "Error", "EXECUTE failed" )
      RETURN
END IF
Then I run the app, first time to call this function without any error, but no data inserted, no thing happen.
keep in the app and call the function again, give me error declare error.
debug give me SQLCode = 100.
SP is fine, I can insert data with isql like:
exec MySP 'name', '2014-06-18'
How to figure out the problem and fix it?

You didn't mention the database in question, but the first thing I would recommend is making the call via and RPCFUNC declaration on a user object to type transaction rather than embedded SQL. Embedded SQL (IMHO) should be a last resort.
See: Using Transaction Objects to call Stored Procedures

How to call a form with parameters in PL/SQL

hi
I added a button in my form,now I want to call another form in the button's PL/SQL prucedure. how to do it?
thinks
Frank

Hi,
You can use wwa_app_module.set_target api.
declare
l_url varchar2(2000);
begin
l_url := 'report1.show&p_arg_names=deptno&p_arg_values=10';
<product_schema>.wwa_app_module.set_target(l_url, 'CALL');
end;
Thanks,
Sharmila

How to call crystal report from plsql

How to call crystal report from plsql?

http://asktom.oracle.com/pls/ask/f?p=4950:8:14685899341865976974::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:952229840241,

How to call a report in another report?reply plz

how to call a report in another report?

hi,
chk this.
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
* load each personnel number accessed from the structure into
* parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
                with p_param2 = 'value'.
Other additions for SUBMIT
*Submit report and return to current program afterwards
SUBMIT zreport AND RETURN.
*Submit report via its own selection screen
SUBMIT zreport VIA SELECTION-SCREEN.
*Submit report using selection screen variant
SUBMIT zreport USING SELECTION-SET 'VARIANT1'.
*Submit report but export resultant list to memory, rather than
*it being displayed on screen
SUBMIT zreport EXPORTING LIST TO MEMORY.
* Once report has finished and control has returned to calling
* program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
* DISPLAY_LIST to retrieve and display report.
Regards
Anver

How to call a transaction with a variant

Hi all
I created a bdc program after updating it should call another transaction with predefined variant that that transaction program is of type module pool.
can anyone tell me the syntax how to call a transaction with a variant.

Hi
goto Tcode SHD0
enter the Tcode for which Tran Variant has to be created(dialog Tcode)
enter Trans variant to be created
press create button
it will go through all the screens of that Tcode and save
and modify the fields as per requirement
we can create Transaction Variants Using SHD0 Transaction.
Transaction Variants and Screen Variants
Transaction variants can simplify transaction runs as they allow you to:
Preassign values to fields
Hide and change the 'ready for input' status of fields
Hide and change table control column attributes
Hide menu functions
Hide entire screens
In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions).
Regards
Anji

CPI-C calling a report with long report name

Hi there,
we are communicating to a SAP System with CPI-C.
My question:
How can I call a report with CPI-C which has a name with more than 8 characters?
(I am using SAP_CMLOGON2 of CPI-C SDK for C++)
I want to use namespaces and 8 Characters are too short for this.
Any Ideas?
Thx,
Andi

Hi Scott,
According to your description, you want to call the report which contains subreports in asp.net.
Based on my research, when we call the report which contains subreports in asp.net, we should attach a handler to the SubReportProcessing event of the report. For more information, please refer to the similar thread: Running
Reports SubReports and parameters from Asp.net. Besides, you could also refer to this
article to render the main report and sub report in ReportViewer control.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

How to call a report from a web application

Hi,
I have a web server in wich is installed Reports 6i. My question is how can I call reports 6i to generate a pdf using a .rep file from my web application (built with java)?

Hi,
The below link will be very useful for one who need idea on calling Oracle Report from Java Application,
http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/reportswebservice/index.html
Thanks & Rgds,
M T

How to call discoverer report with parameters over http link?

Similar Messages

Maybe you are looking for