How To Call Function 'OnClick' of Button

DWMX ... How do I call the function prc_SendEmail() written
in VBScript above the head ... the following is the best I can do
and, whilst the page shows, when I click the button, nothing
happens and I get an Error on Page at bottom left of explorer page.
<input name="Button" type="button"
onClick="prc_SendEmail()" value="Send Email">
Thanks,
dave

> I don't know where the email reader came from.
Sorry - my mistake.
> That's what I'm asking - how?
The mail functions reside on the server.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"crash" <[email protected]> wrote in message
news:[email protected]...
>>> a) why could a client side action not fire off
an email?
>>
>> Because an email reader is not a user agent.
>
> 1. This doesn't appear to be read in an email reader,
but a user agent,
> yes/ I don't know where the email reader came from.
>
>>> b) not my site, not my concern.
I was looking at a code fragment and
>>> correcting it for technical content, not really
anything other than
>>> that.
>>
>> But your correction was in error.
>
> That's what I'm asking - how? Is the function instrinsic
and is that what
> I'm missing? Was there another post that defines what
the function does?
> If the function tells the page to reload and send the
current information
> to the email you specified in the page (if the page
contains a form), why
> would it not work? Again, is this a function native to
ASP and that's
> what I'm missing?
>
>> Try it on a Mac.
>
> Again, for all I know this could be a page on an
intranet that uses only
> PC's built between October and November of 2005 under
only mostly sunny
> skies. If there was more info with this post, I might
say something about
> it. As it was, it looked like he was just looking to get
a function
> working in IE
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "crash" <[email protected]> wrote in
message
>> news:[email protected]...
>>> a) why could a client side action not fire off
an email?
>>>
>>> b) not my site, not my concern.
I was looking at a code fragment and
>>> correcting it for technical content, not really
anything other than
>>> that.
>>>
>>> am I missing something, or is there some reason
why a client side
>>> VBScript won't fire? Not saying it's the best
way to do it, but only
>>> saying, technically speaking, isn't this
possible?
>>>
>>> If I'm wrong, just tell me. I'm not awake enough
yet to see the point
>>> I'm missing.
>>>
>>> Jon
>>>
>>> "Murray *ACE*"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> a) it's client side, and b) it only works in
IE?
>>>>
>>>> --
>>>> Murray --- ICQ 71997575
>>>> Adobe Community Expert
>>>> (If you *MUST* email me, don't LAUGH when
you do so!)
>>>> ==================
>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>> ==================
>>>>
>>>>
>>>> "crash" <[email protected]> wrote
in message
>>>> news:[email protected]...
>>>>> Well, I have no idea what the
prc_SendEmail() function does, but I've
>>>>> used VB script controlled by user
actions to control Microsoft
>>>>> Agents - so what's the difference?
>>>>>
>>>>>
>>>>> "Gary White"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> On Mon, 5 Jun 2006 15:44:10 -0500,
"crash" <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>>>try instead:
>>>>>>>input name="button" type="button"
onClick="<% prc_SendEmail(); %>"
>>>>>>>value="Send Email">
>>>>>>
>>>>>>
>>>>>> That could never work. You're
assigning a server side VBScript
>>>>>> function
>>>>>> as the event handler of a client
side event.
>>>>>>
>>>>>> Gary
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Similar Messages

How to call function behind the button and update only specific record

Greetings,
1 - i wnat to ask few things as i m new to apex, i am using apex 4.1, and created 3 select list and a button in seleting of parameter,
1 select list : select area
2 select list: select product
3- select list - size of the product
i want to generate Ids for the follwing. for that i created query for INSERTING RECORD FROM ONE TABLE TO ANOTHER , generation the ids when button pressed "Generate" after selecting parameters,
Now where i call that QUERY on button ? because when i create button its gives me option to submit, defined dynamic action, etc, pls gudie me where i call the function name id_generation when button pressed?.
2- second thing i creared tabular " select user_id, product_name, product_type from product".
by defualt check box list are create delete submit button are created, first when i insert record it saves that was fine, e.g i entered 50 records and afterward i want to update only one record, e.g there is a record product name = box, if i change it to box small and click submit then it saves all the page means all 50 records,
i want to submit only that record that i changed, for that i use the logic that only those records should be updated which are checked but the user. how will i do this ? where to use the preocess , please guide
Edited by: Omzz on Oct 2, 2012 11:28 PM

If I understand what you are trying to do is correct you could possibly do this by:
Creating and AFTER INSERT trigger on the table based on the tabular form which inserts the record into a seperate table after the record is inserted something like:
CREATE OR REPLACE TRIGGER copy_records
AFTER INSERT ON table a
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
INSERT INTO table b
VALUES :NEW.col1, :NEW.col2 etc......
END;
There is also a way that you could do it within the form using a cursor on the tabular form with APEX_APPLICATION.G_ ......
Chris

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

How to call function in jar file?

First, I can't write english well.(I'm korean.. ) sorry about that.
I have known function in jar file.
but I don't know how to call function in jar file.
how can I this work?
My project and another project are respectively developing D-project with me and other man.
so i need it. or I can't do this work.
I will paste other's source code in my source code.
and then recomplie , build it.. but it is not my wish!
thanks for reading my sentence.

If you have a jar file with a class that you wish to use, then you must add the jar file to your class path ($CLASSPATH on unix, linux, etc. and %CLASSPATH% on Windows).
Then you can use the class normally, just as you would if it were not in the jar.
If you meant something else, you'll need to explain what you meant.

HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM

PLEASE ANYONE TELL ME, ABOUT HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM. IT IS VERY URGENT!!!!!!!!!1

Hi,
Under Global Definitions, we have 'Form Routines' tab. Under this tab, u can have a dynamic subroutine call. With in FORM and ENDFORM, you can call the Function Module.With in the Program Lines editor, u can define the subroutine........PERFORM.
If helpful, reward points.
Rgds,
CK

How to call Function Module in Selection Screen

Hi All,
I have developed one HR Report (Qualification Overview Report: To display all active employees and their Qualifications along with their Proficiency).
Already it has 3 selection fields on selection screen and now I want one more field on selection screen like Qualification Id.
But when the end user press F4 it should display the Popup which comes in TCode: PA30 at the time of Creating Qualification.
I have debugged the Standard Code and searched the Function Module: 'RH_OBJID_REQUEST' which shows Popup which I wanted to show at Selection screen for newly added field.
So I have to define new field like 'Qualification Id' and want to attach above Function Module so that it will cater my requirement.
If anybody has worked on this type of requirement then please let me know.
Thanks,
Jay.

Hi Raymond,
I have written following code:
s_quali is used in selection screen for Qualification Id.
SELECT-OPTIONS : s_quali   FOR hrp1000-objid NO INTERVALS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_quali-low.
CALL FUNCTION 'RH_OBJID_REQUEST'
    EXPORTING
      plvar           = '01'
      otype           = 'Q'
      seark           = '*'
      seark_begda     = '18000101'
      seark_endda     = '99991231'
      set_mode        = 'X'
    TABLES
      sel_objects     = git_objects.
LOOP AT git_objects INTO wa_objects.         " Logic is to fill up the Selection screen field
    s_quali-low = wa_objects-objid.
    APPEND s_quali TO s_quali.
    CLEAR : s_quali, wa_objects.
ENDLOOP.
Now problem is that, its not populating all values in selection screen which I select from Popup screen (Choose Qualification).
I checked that the first value in the internal Table is over written by second records in the internal table
For e.g.: If I select 001,002,003,004 from Popup screen then I am able to see only 002,003,004 in the Multiple selection view of that field though it is available in the internal table s_quali (because I am filling up the table using Loop-Endloop)
Please advise me how to overcome this issue. (How to fill up selection screen)
Thanks,
Jay.

HANA Server site JavaScript how to call functions in another .js file? thanks

In HANA Studio, I have created a .js file and a server site javaScript .xsjs file. The .js file and .xsjs file are in the same path .I create function F1() in js file. Then I want to call function F1 in xsjs file. But it always through an error “f1 was used before it was defined”. Any suggestion? Thanks very much
.js file:
.xsjs file:

Hi Jim,
Now I have found the method how to use external library. If we want to outsource some of xsjs functions to an external library, XSEngine provides a special format for this, called “.xsjslib”. Then in xsjslib file, we define functions need to be outsourced.
In .xsjs file, we can import a library using the following code:
$.import("<Package_Library_was_deployed>","xsjslib File Name");
The Package_Library_was_deployed please refer to:
Access functions inside library by this path:
$.Package_Library_was_deployed.xsjsFileName.FunctionName();

How to call functions defined and packed in a .dll file

hi,
my client have provided me with a .dll file which implements all functions tasks.
earlier we created a applications in vb that accessed functions from the .dll file provided by client.
now he wants java implementation of the same application written in vb.
now how to access functions in .dll file provided by the client from java source code.
regards,
s.mohamed asif

For this you should write JNI wrappers for the native functions, that is you create class with the native function prototypes as native methods, implement these methods with native functions in JNI module, each JNI function calls a native function from your DLL.
I know that JNI coding is a greate pain. That is why I am developing Java Platform Invoke which is a paradigm of .NET Platform Invoke. See my demo at
http://www.sharewareplaza.com/Java-Platform-Invoke-API-Demo-version-download_49212.html

How to call function module/ class method of another system.

Suppose now i am working in System A. And i need to check the system Status of System B, System C, System D....
my design is to provide an interface. and each system realize the interface individually.now my question is how cani call the interface, because they are in different systems.
of course i know about the host name, port and logon information over these systems.
who can give my some suggestions or other solutions.
thanks in advance.
Johnney.

Hello,
If u want to call a FM of the other system then that FM should be a RFC enable on one.
<b>CALL FUNCTION func DESTINATION dest.</b>
Effect
Executes the function module from an external source (as a Remote Function Call or RFC); dest can be a literal or a variable.
Depending on the specified destination, the function module is executed in another R/3 or R/2 System. Externally callable function modules must be flagged as such in the Function Builder (of the target system).
Since each destination defines its own program context, further calls to the same or different function modules with the same destination can access the local memory (global data) of these function modules.
To maintain existing destinations, choose Tools -> Administration, Administration -> Network -> RFC destinations
Note
Under certain circumstances, an RFC may trigger a database commit. For this reason, RFCs must not be used between pairs of SQL statements that open and close a database cursor (such as SELECT... ENDSELECT).
Vasanth

How to call function module from IP

Hi
I need to trigger the process chain from the input ready queries in Bex analyzer. I figured out that I need to call RSPC_API_CHAIN_START.
How do we go about in calling the above function module in IP.
Thanks in advance
I

Hi Matt
Thanks for your response, it was very productive at the right time as we saw our process chain running indefinetly. With selecting all chars to be changed, it ran just once with no errors.
what is TA ? I know rsplan- transaction code for the planning modeler.
Can you tell me how can we call function module in custom exit planning function.
Where should I embed the code
CALL FUNCTION 'RSPC_API_CHAIN_START'
               EXPORTING
                 I_CHAIN             = 'ZPC_CCATOPCA'.
               I_T_VARIABLES       =
               I_SYNCHRONOUS       =
               I_SIMULATE          =
               I_NOPLAN            =
             IMPORTING
               E_LOGID             =
             EXCEPTIONS
               FAILED              = 1
               OTHERS              = 2
thanks in advance

How to call function which return and out

My function specifcation is
FUNCTION GetGoogleScholarActivation (
pi_clnt_id IN google_scholar_status.clnt_id%TYPE,
pi_status_type IN ci_status_type_tab_type,
po_status OUT ci_status_tab_type,
po_date OUT ci_date_tab_type
RETURN NUMBER ;
where type is
TYPE ci_status_type_tab_type IS TABLE OF VARCHAR2 (1) INDEX BY BINARY_INTEGER;
TYPE ci_status_tab_type IS TABLE OF VARCHAR2 (10) INDEX BY BINARY_INTEGER;
TYPE ci_date_tab_type IS TABLE OF VARCHAR2 (8) INDEX BY BINARY_INTEGER;
I am trying to call function in SQL PLUS for testing as
declare
var number ( 10);
TYPE p_st1 IS TABLE OF VARCHAR2 (1) INDEX BY BINARY_INTEGER;
p_st p_st1 ;
type p_status1 IS TABLE OF VARCHAR2 (1) INDEX BY BINARY_INTEGER;
p_status p_status1 ;
TYPE p_date1 IS TABLE OF VARCHAR2 (8) INDEX BY BINARY_INTEGER;
p_date p_date1 ;
Begin
p_st(0) := 'A';
var := PQDKGOSH.GetGoogleScholarActivation(11920 , p_st, p_status ,p_date );
dbms_output.put_line ('Activation_status '|| p_status(0) );
dbms_output.put_line ('Activation_date '|| p_date(0) );
dbms_output.put_line ('Retun Value'|| var );
End;
but getting error PLS-00306: wrong number or types of arguments in call to
'GETGOOGLESCHOLARACTIVATION'
so how to test from SQL Plus

HI
I tried to execute below like this
declare
var number ( 10);
p_st ci_status_type_tab_type ;
p_status ci_status_tab_type;
p_date ci_date_tab_type;
Begin
p_st(0) := 'A';
var := PQDKGOSH.GetGoogleScholarActivation(11920 , p_st, p_status ,p_date );
dbms_output.put_line ('Activation_status '|| p_status(0) );
dbms_output.put_line ('Activation_date '|| p_date(0) );
dbms_output.put_line ('Retun Value'|| var );
End;
still iget error
PLS-00201: identifier 'CI_STATUS_TYPE_TAB_TYPE' must be declared
becuse this declareation i did in package specification .
and i am trying to execute the function .

How to call functions in windows or Solaris in servlet?

Hello,
Does anyone know if there is a way for servlets to call functions in windows or solaris shell command????
Thanks :)

Checkout the Runtime.exec family of methods.
I would think carefully if calling a shell script or batch file from a J2EE web component is something you really want to do though.

How to call function in FOX

In fox , can I use call function which developed by ABAP?
I want to use the call function to read table in FOX.
thanks

hi
u can use functions, but not complex.
the syntax is as follows
CALL FUNCTION UPC_FUNCEXEC_SAVE
EXPORTING
I_NO_TRANSACTION_DATA = FLAG
tx
srin

HOW TO CALL FUNCTION MODULE FROM ABAP4 EDITOR

HI !
friends
I want to call function module from abap 4 editor.
is there any shortcut key from edit menu through which if give a function module name then it calls the function automatically?
points will be awarded.
Cheers
troy

command will be like this
<b> call function 'YW2_GET_MNW_PERIOD'
        exporting
          w_budat       = v_datum
        importing
          w_period      = i_date-period
          w_period_desc = i_date-p_desc.</b>
Regards
prabhu

How to call function BAPI_GOODSMVT_CREATE ?

Hi all,
I want to create a material document by calling the function BAPI_GOODSMVT_CREATE
I don't know what to pass although I know I have to export something (GOODSMVT_HEADER and GOODSMVT_CODE) in my ABAP. But what should I actually pass to the function?
Thanks.

Hi,
Try with this
data : gt_header like bapi2017_gm_head_01 ,
       gt_code like bapi2017_gm_code,
       gt_item like bapi2017_gm_item_create occurs 0,
       gt_sno like bapi2017_gm_serialnumber occurs 0.
gt_code-gm_code ='03'. "goods issue
In the header pass the posting date, header text etc...
and in the line item populate material, plant, storage location, movement type.....
IF necessary pass the serial number in the gt_sno table
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header       = gt_header
      goodsmvt_code         = gt_code
    tables
      goodsmvt_item         = gt_item
      goodsmvt_serialnumber = gt_sno
      return                = gt_return.
Cheers
Sasi

How To Call Function 'OnClick' of Button

Similar Messages

Maybe you are looking for