How to call HTTP POST method in SOA 10g

Hi,
I have a requirement where i need to call a HTTP Post Method, I have a URL, if i hit it in the browser, i am getting the response details. I know there is a HTTP Binding Adapter in 11g, but we are on 10g. Can anyone please let me know whether we can do it in 10g and how. ?
Thanks Always
N

Look at 10g samples under tutorials/702.bindings.

Similar Messages

How to call HTTP Post Method URL in SOA 10g

Hi,
I have a requirement where i need to call a HTTP Post Method, I have a URL, if i hit it in the browser, i am getting the response details. I know there is a HTTP Binding Adapter in 11g, but we are on 10g. Can anyone please let me know whether we can do it in 10g and how ?
Thanks Always
N

You will need to write the WSDL by yourself. Just make sure you have the end point detail, operation name(if required) and the schema available to write the WSDL.

Call HTTP POST Service from SOA HTTP Binding (one - way)

Hi All
Why doesn't HTTP Binding support one-way Reference (It only allows request-response in outbound mode)? I need to call a one way HTTP post service from BPEL.
How can i achieve this with HTTP-Binding. This one way HTTP POST service is on OSB. Please help!
Thanks!

Look at 10g samples under tutorials/702.bindings.

Can i call a HTTP Post method in ABAP or XI?

Hi All,
Can you please let me know how to call a HTTP Post method in ABAP or XI?
my HTTP Post is looks like (HTML form)
<form action="http://111.111.111.1:8080/sample_url" method="POST">
<table>
<tr><th>applicationId</th><td><input type="text" name="applicationId" value="test"></td></tr>
<tr><th>authCode</th><td><input type="text" name="authCode" value="test"></td></tr>
<tr><th>message</th><td><input type="text" name="message" value="Hello"></td></tr>

<tr><th>contractId</th><td><input type="text" name="contractId" value="test"></td></tr>
<tr><th>receiverMobileNumber</th><td><input type="text" name="receiver" value="11111111111"></td></tr>
<tr><td colspan="2"><input type="submit" name="send" value="send"></td></tr>
</table>
</form>
I have a requirement to send a message to the above mention URL using the POST method.
Please let me know the possibility of sending it from ABAP or XI adaptor.
Thanks & Regards,
Chaminda

Hi Prateek,
shoul we send the below code as the payload?
<tr><th>applicationId</th><td><input type="text" name="applicationId" value="test"></td></tr>
<tr><th>authCode</th><td><input type="text" name="authCode" value="test"></td></tr>
<tr><th>message</th><td><input type="text" name="message" value="Hello"></td></tr>

<tr><th>contractId</th><td><input type="text" name="contractId" value="test"></td></tr>
<tr><th>receiverMobileNumber</th><td><input type="text" name="receiver" value="11111111111"></td></tr>
Thanks.
Chaminda

How to call backing bean method from java script

Hi,
I would like to know how to call backing bean method from java script.
I am aware of serverListener and [AjaxAutoSuggest article|http://www.oracle.com/technology/products/jdev/tips/mills/AjaxAutoSuggest/AjaxAutoSuggest.html]
but i am running in to some issues with [AjaxAutoSuggest article|http://www.oracle.com/technology/products/jdev/tips/mills/AjaxAutoSuggest/AjaxAutoSuggest.html]
regarding which i asked for help in other thread with subject ....Question on AjaxAutoSuggest article (Ajax Transactions Using ADF and J...)
The reason why i posted is ( though i realise both are duplicates) .. that threads looks as a specific question to that article hence i would like to ask the quantified problem is asked in this thread.
So could any please letme know how to call backing bean method from java script
Thanks
Murali
Edited by: mchepuri on Oct 24, 2009 6:17 PM
Edited by: mchepuri on Oct 24, 2009 6:20 PM

Hello,
May know how to submit a button autoamtically on onload of page with clicking a welcome alert box. the submit button has managed button too to show a message on console using SOP.
the problem is.
1. before loading the page a javascript comes on which i clicked ok
2. the page gets loaded and the button is there which gets automatically clicked and the managed bean associated with prints a message on console using SOP.
I m trying to do this through server listener and click listener. the code is(adf jspx page)
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" binding="#{backingBeanScope.backing_check4.d1}">
<af:form id="f1" binding="#{backingBeanScope.backing_check4.f1}">
<af:commandButton text="commandButton 1"
binding="#{backingBeanScope.backing_check4.cb1}"
id="cb1" action="#{beanCheck4.submit1}"/>
<af:clientListener type="click" method="delRow"/>
<af:serverListener type= "jsServerListener"
method="#{backingBeanScope.backing_check4.submit1}"/>
<f:facet name="metaContainer">
<af:resource type ="javascript">
x=confirm("hi");
// if(x){
delRow = function(event){
AdfCustomEvent.queue(event.getSource(), "jsServerListener", {}, false);
return true;
</af:resource>
</f:facet>
</af:form>
</af:document>
</f:view>

</jsp:root>
the backing bean code is -----
public class classCheck4 {
public classCheck4() {
public String submit1() {
System.out.println("hello");
return null;
}

How to Call Event Handler Method in Another view

Hi Experts,
                   Can anybody tell me how to call Event handler Method which is declared in View A ,it Should be Called in
view B,Thanks in Advance.
Thanks & Regards
Santhosh

hi,
1)    You can make the method EH_ONSELECT as public and static and call this method in viewGS_CM/ADDDOC using syntax
    impl class name of view GS_CM/DOCTREE=>EH_ONSELECT "method name.
             or
2)The view GS_CM/ADDDOC which contains EH_ONSELECT method has been already enhanced, so I can't execute such kind of operation one more time.
                     or
3)If both views or viewarea containing that view are under same window , then you can get the instance ofGS_CM/DOCTREE from view GS_CM/ADDDOC through the main window controller.
lr_window = me->view_manager->get_window_controller( ).
    lv_viewname = 'GS_CM/DOCTREE '.
lr_viewctrl ?= lr_window ->get_subcontroller_by_viewname( lv_viewname ).
Now you can access the method of view GS_CM/DOCTREE .
Let me know in case you face any issues.
Message was edited by: Laure Cetin
Please do not ask for points, this is against the Rules of Engagement: http://scn.sap.com/docs/DOC-18590

Issue with Remove Namespace HTTP POST method

I am working on an integration where cXML from the Partner will be posted to SOA and from SOA another HTTP post to end partner. its basically
HTTP Post(partner 1)----------------->SOA--------------->HTTP Post(Partner 2).
I have cXML its in dtd format which i have converted to Native format using file-adapter and added namespace schema. so My question is while cXML is post to SOA i have added namespace schema and consumed it to my BPEL, while it leaves out Partner2 through HTTP post again the namespace should be removed and sent to partner 2. I am stuck at this Point. need Urgent help. please. how to remove name space.

Hi,
Create xsl style sheet file (xml) from you jdeveloper. Path to go File->New. go to all technogloy tab and select All Items catagory and select XSL style sheet.
Remove content in the generated xml file and copy and paste the below code
<?xml version='1.0' encoding='UTF-8'?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" exclude-result-prefixes="xsl ns1">
<xsl:template match="comment()|processing-instruction()|/">
<xsl:copy>
<xsl:apply-templates/>
</xsl:copy>
</xsl:template>
<xsl:template match="*">
<xsl:element name="{local-name()}">
<xsl:apply-templates select="@*|node()"/>
</xsl:element>
</xsl:template>
<xsl:template match="@*">
<xsl:choose>
<xsl:when test="name() != 'xmlns'">
<xsl:attribute name="{local-name()}">
<xsl:value-of select="."/>
</xsl:attribute>
</xsl:when>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
In Your bpel process under assign activity give it as below
<copy>
ora:getContentAsString( ora:processXSLT( 'xsl/removeNamespaces.xsl', bpws:getVariableData('variable name','rootelement')))
<to variable="String"/>
</copy>
String variable contains your xml message with out namespaces in string format.
You can pass this string content to your partnerlink 2.
Regards,
Tarak.

Adf mobile : calling rest post method

Hi all,
I am calling a rest post using rest adaptor but i am getting the following error:
Unable to find operation : unknown
Please tell me where should i specify the operation name while calling rest post method.
Regards,
Deepak

I would suggest you use the HTTP Analyzer to see what is sent to your service specifically and identify the missing part.
One common pattern that we see with complex web services, is to create a server side proxy that calls the complex service and exposes a simpler interface that is consumed by the mobile application.
This will also reduce the network traffic to your mobile application (and will likely reduce the application's size)

Example of sending the po request to my partner using https post method

I need to send the po request to my partner using https post method.
Is there any example for my scenario in oracle b2b?
Usecase:
mycompany
othercompany
mycompany -> Posts xml document with no namespace -> othercompany
Protocol: https

I need to send the po request to my partner using https post method.It is possible. FYI, by default HTTPS uses post method.
Is there any example for my scenario in oracle b2b?Not exact sample is available but yes, similar samples are available here -
http://www.oracle.com/technology/sample_code/products/b2b/index.html
I would suggest you to go through below tutorial to have better understanding -
http://www.oracle.com/technology/products/soa/b2b/collateral/B2B_TU003_ebxml.pdf
Namespace is not an issue. It's upto you whether you like to keep it or not. From XML technology point of view, it is always recommended to have a namespace to bind each and every node with it, but I have seem cases where people don't use them.
Regards,
Anuj

How to use the POST method In Oracle APEX 3.1

Hi,
In APEX if we are submitting the page the parameters( Variables ) will pass through URL.
How to hide the these parameters from URL??
I Hope POST method will solve this problem.
How to use the POST method in APEX???
Help me out to solve this problem.
thanks in advance.
Cheers,
Shan

In APEX if we are submitting the page the parameters( Variables ) will pass through URL.No they won't. Submission POSTs the <tt>wwv_flow</tt> form.
Sometimes a branch may be performed after submission, generating a URL in which parameter values are visible. To avoid this, use the save state before branching option.
Other actions—like using navigation lists, or clicking a link in a report—will perform a GET using parameters in the URL. In these cases using Session State Protection is advised.

How to call a bean method from javascript event

Hi,
I could not find material on how to call a bean method from javascript, any help would be appreciated.
Ralph

Hi,
Basically, I would like to call a method that I have written in the page java bean, or in the session bean, or application bean, or an external bean, from the javascript events (mouseover, on click, etc...) of a ui jsf component. I.e., I would like to take an action when a user clicks in a column in a datatable.
Cheers,
Ralph

How to call a AM method with parameters from Managed Bean?

Hi Everyone,
I have a situation where I need to call AM method (setDefaultSubInv) from Managed bean, under Value change Listner method. Here is what I am doing, I have added AM method on to the page bindings, then in bean calling this
Class[] paramTypes = { };
Object[] params = { } ;
invokeEL("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
This works and able to call this method if there are no parameters. Say I have to pass a parameter to AM method setDefaultSubInv(String a), i tried calling this from the bean but throws an error
String aVal = "test";
Class[] paramTypes = {String.class };
Object[] params = {aVal } ;
invokeEL("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
I am not sure this is the right way to call the method with parameters. Can anyone tell how to call a AM method with parameters from Manage bean
Thanks,
San.

Simply do the following
1- Make your Method in Client Interface.
2- Add it to Page Def.
3- Customize your Script Like the below one to Achieve your goal.
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("GetUserRoles");
operationBinding.getParamsMap().put("username", "oracle");
operationBinding.getParamsMap().put("role", "F1211");
operationBinding.getParamsMap().put("Connection", "JDBC");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
return null;
i hope it help you
thanks

HTTP POST method does not pass parameters to the server

Hi ,
I am using SSO using VSJ product and implemented using a filter.
I have problems as below
1. Every request to the web server will be intercepted by this vsj filter and if sso does not succeed it will send 403
2. my system will detect 403 in web.xml and redirect to login page
3. user key in username and password and log in
4. after successful login set the HttpSession and redirect to homepage
Problem is subsquent form submit / ajax call using "POST" method cannot pass any parameters to the servers ( parameters sent using POST will be null in the servers ) ? GET is okay
If i comment out the vsj filter altogether , everything works as per normal.
My Question is
1. Is there anyway to overcome come ?
2. Is there any method to clear off whatever this sso vsj has set ( clear cookies / start new browser instance / etc ) in order to forget the state
Any idea?
Thanks

Yes.
here to illustrate
public MyFilter extends VSJAuthFilter
*public void doFilter(){*
*if(session.getAttribute("loginSucces") != true){*
super.doFilter(); //call VSJ Auth filter to perform SSO in order to get User Principal populated.
*}else{*
chain.doFilter(); // normal filter
My Filter only intercepts *.jsp and *.do
Basically here is the pattern that i observe
1. If i hit default url (homepage.do) for the first time it will trigger the super.doFilter() , it will then throw 403 and redirect to login.html , after success and go to homepage , subsequent POST parameter is missing
2. if i hit the external login page directly just to simulate ( eg : login.html ) it wont trigger this filter , after success and go to homepage , subsequenet POST parameter is okay
3. GET is always ok
I am using weblogic server 10.x btw
Thanks

JAX-WS -- Force a wsimport generated ws client to use http POST method

I've used wsimport to generate a JAX-WS client for a wsdl and xsd bindings that were provided to me.
The basic implementation goes something like this.
URL serviceUrl = ...url to the live web service's wsdl (this will change often and needs to be data driven)
QName qname = new QName("thenamespace", "MyService")
MyService myService = new MyService(serviceUrl, qname);
At this point a http GET request is sent to the server which promptly spits back a "405: method not allowed" because it is only configured to accept the http POST method.
Unfortunately i cannot change this behavior and need a way to get the web service client to generate http POST requests.
Setting the following seemed to have no effect.
System.setProperty("javax.xml.ws.http.request.method", "POST");
Thanks!

so, keep the wsdl as a local resource and use a url for the local resource. then the service will not request the remote wsdl.

How to call jpf controller method from javascript

Can any one help me how to call pageflow controller method from JavaScript.\
Thanks.

Accessing a particular pageflow method from Javascript is directly not possible unless we do some real funky coding in specifying document.myForm.action = xyz...Heres what I tried and it did not work as expected: I found another workaround that I will share with you.
1. In my jsp file when I click a button a call a JavaScript that calls the method that I want in pageflow like this: My method got invoked BUT when that method forwards the jsp, it lost the portal context. I saw my returned jsp only on the browser instead of seeing it inside the portlet on the page of a portal. I just see contents of jsp on full browser screen. I checked the url. This does make the sense. I do not see the url where I will have like test1.portal?_pageLabe=xxx&portlet details etc etc. So this bottom approach will notwork.
document.getElementById("batchForm").action = "/portlets/com/hid/iod/Batches/holdBatch"; // here if you give like test1.portal/pagelable value like complete url...it may work...but not suggested/recommended....
document.getElementById("batchForm").submit;
2. I achieved my requirement using a hidden variable inside my netui:form tag in the jsp. Say for example, I have 3 buttons and all of them should call their own action methods like create, update, delete on pageflow side. But I want these to be called through javascript say for example to do some validation. (I have diff usecase though). So I created a hidden field like ACTION_NAME. I have 3 javascript functions create(), update() etc. These javascripts are called onclick() for these buttons. In thse functions first I set unique value to this hiddent field appropriately. Then submit the form. Note that all 3 buttons now go to same common action in the JPF. The code is like this.
document.getElementById("ACTION_NAME").value = "UPDATE";
document.getElementById("batchForm").submit.
Inside the pageflow common method, I retriev this hidden field value and based on its value, I call one of the above 3 methods in pageflow. This works for me. There may be better solution.
3. Another usecase that I want to share and may be help others also. Most of the time very common usecase is, when we select a item in a drop bos or netui:select, we want to invoke the pageflow action. Say we have 2 dropdown boxes with States and Cities. Anytime States select box is changed, it should go back to server and get new list of Cities for that state. (We can get both states and cities and do all string tokenizer on jsp itself. But inreality as per business needs, we do have to go to server to get dynamic values. Here is the code snippet that I use and it works for all my select boxes onChange event.
This entire lines of code should do what we want.
<netui:anchor action="selectArticleChanged" formSubmit="true" tagId="selectPropertyAction"/>
<netui:select onChange="document.getElementById(lookupIdByTagId('selectPropertyAction',this )).onclick();" dataSource="pageFlow.selectedArticleId" >
<c:forEach items="${requestScope.ALL_ARTICLE}" var="eachArticle">
<%-- workshop:varType="com.hid.iod.forms.IoDProfileArticleRelForm" --%>
<netui:selectOption value="${eachArticle.articleIdAsString}">${eachArticle.articleItemName}</netui:selectOption>
</c:forEach>
</netui:select>
See if you can build along those above lines of code. Any other simpler approches are highly welcome.
Thanks
Ravi Jegga

How to call HTTP POST method in SOA 10g

Similar Messages

Maybe you are looking for