How to call "long text" of master inspection characteristic in ALV

Dear All,
we have created customized QM report in ALV which shows Result, Valuation and Short text for each MIC against each inspection lot. Can we call long text also in the ALV.
Please guide how to call it in ALV?

just implement some function on the ALV toolbar, read the long with FM READ_TEXT and show it to the user e.g. using CATSXT_SIMPLE_TEXT_EDITOR.

Similar Messages

Tcode FV50: How to find long text in FI Document line item Before Saving.

Hi,
How to find long text in FI Document line item.
During Parking of the FI document through Tcode FV50 i m giving the some text in the long text not in the text field.
I would like to validate the Long Text Before Saving in user exit "U300" under the "Sunstitution" .
Please anybody can be help me out where exactly this long text is going to be stored or in which internal table or memory id.
Please give me the answer as soon as possible .
Note:- Read_Text function module is not useful. Because Read_text useful after saving document.

Hi Amit,
In application area FINANCIAL ACCOUNTING , go for node LINE ITEM. Here create a step & maintain the prerequisite as per your requirement & in the check you can mention the code or you can direct it to a custom program like ZFI_RGGBR000.
Here while maintaining the check you will get structures BKPF & BSEG in which you will get the desired field you are looking for.
Just try to explore in your system how the other validations are maintained.
After you are done with all your code, you have to run the regeneration program RGUGBR00.
Here utmost care should be taken while running regeneration program, you should select all the checkboxes in the selection screen except GENERATE SETS, GEN SUBSTN ROUTNS IN ALL CLNTS & TRACE PROG. GENERATE CALLS .
Hope this make your doubt clear.
Regards
Abhii

How to create Long Text in Module Pool Program

Hi all,
I want to develop a new module pool program and I want to use Long text screen in this program and also want this text will store in table.I never develop such type of module pool before.This long text will like sales order long text.Please let me know the steps how I can develop such type of program and how I save long text huge data in table.
Thanks & Regards
Nirmal

Hai ,
here you have to use custom control, for this
DATA: line(256) TYPE c,
      text_tab LIKE STANDARD TABLE OF line,
      field LIKE line.
1) Create custom control in your screen
2)   CREATE OBJECT: container EXPORTING container_name = 'TEXTEDIT',   "--> (this is custom control name in screen)
                   editor    EXPORTING parent = container.
3) CALL METHOD editor->get_text_as_stream "This method reads data from custom control , inserts into itab 'text_tab'
         IMPORTING
          text = text_tab.                                       "
      READ TABLE text_tab INTO line INDEX 1. read the text into wa 'line'
if you want more clarity , see 'ABAPDOCU' >ABAP USER DIALOGS>    COMPLEXSCREEN ELEMENTS--> DEMO CUSTOM_CONTROL

How to print long text in scripts

plzzzzzzzzz answer this qestion
how to print long text in scripts

Hi Kranthi,
You can create Text Id and include that in your script.
For example:
/E TEXT
/: INCLUDE ZTEXT OBJECT TEXT ID ST
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

How to read long text in Document line item

Hi,
How to read long text in FI Document line item.

Use Read_text function module.
you need to pass
ID
LANGUAGE
NAME
OBJECT to the function moduel
To find the Text id name language and object these are the following steps. Example: FB02
1. goto FB02, Enter Document number
2. from menuselect Goto>Header-->header Text..... New window will be displayed
3. select the Header Text. here you can see all the text.
4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper.
5. in the Next window you will find Text Name. Text ID, Language. etc...
Regards,
Lalit Mohan Gupta.

How to use long texts in explanation tool tip?

Hi ,
Can anyone tell me how to add long text in Explanation tool tip?
I am able to use short OTR texts in explanation tool tip but not able to use long OTR texts.
Thanks and regards,
Vivek Shetty.

For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10

How can copy master inspection characteristic from plant1 to plant2

Now I have 2 plants
I already created all master inspection characteristic that i need by QS21 for plant1
Is there any way I can copy all master inspection characteristic from plant1 to plant2 ?

i'm creating inspection plan( QP01 ) for material , but all the materials & plans are in plant 2 (ss03)
now i have to assign MIC to inspection plan , i only can select MIC of plant 1 ,and plant text would show"plant 1" ....
so i want to create the same MIS for plant 2 , is there any way i can mass copy MIC from plant 1 to plant 2 ?

How to UPLOAD Long Text in QS21

Dear All,
I have written BDC to upload Master Inspection Characterstics,
The Problem is I need to upload the long Text, (which is of some 250 chars).
How to do this.
Help is appriciated.
Thanks in advance
Arun

Hi,
I think there is an ICON to enter the long text.
U can start filling the LONG text here using
RSTXT-TXLINE(03) - this takes around 70 chars the next
chars in RSTXT-TXLINE(04) and so on. U can get this
in SHDB recording.
Regards,
GSR.

How to upload long text using BAPI_SERVICE_CREATE

Hi,
I'm uploading service master records (transaction AC03) through my program using function BAPI_SERVICE_CREATE. As per the requirements, for each service number, I've to pass long text also (refer to the last text area on the transaction screen).
In the tables section of the bapi BAPI_SERVICE_CREATE, there is a provision for an internal table on the form SERVICE_LONG_TEXTS. But it is of no use as even if I pass data to it, it is not written to the database.
Can anyone tell me solution for my problem?
Thanks.
Anuj.

Anuj,
Create a new program using the following code and run it using an existing service number to see if the longtext gets updated. I ran it in my system and it is working fine. If it works for you, then you can modify your code accordingly.
report zlongtext.
data: header like thead,
      ilines like tline occurs 0 with header line.
parameters: asnum like asmd-asnum.
start-of-selection.
header-tdobject = 'ASMD'.
header-tdname = asnum.            " Make sure it has leading zeroes.
header-tdid = 'LTXT'.
header-tdspras = sy-langu.
ilines-tdformat = '*'.
ilines-tdline = 'Just a test to see how it works'.
append ilines.
clear ilines.
call function 'SAVE_TEXT'
    exporting
      header                = header
   INSERT                = ' '
      savemode_direct       = 'X'
    tables
      lines                 = ilines
   exceptions
     id                    = 1
     language              = 2
     name                  = 3
     object                = 4
     others                = 5.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    call function 'COMMIT_TEXT'.
    if sy-subrc = 0.
      write: / 'updated successfully'.
    endif.
endif.

How to print long text in ALV

i want to print a description in text mode which is 5-6 lines some times it have a blank line also so
how to print in ALV .i m using READ_TEXT function but sumtime it not works when text exceed 4-5 lines
what i sud do.

hi,
there is another way u can use yours internal table field like long text field. that is.
parameters: salno type vbak-vbeln.
data: begin of itab occurs 0,
vbeln type vbak-vbeln,
matnr type vbap-matnr,
longtext type thead occurs 0,
end of itab.
data: itabstxl type standard table of stxl with header line.
select single vbakvbeln vbapmatnr into (itab-vbeln, itab-matnr)
                                 from vbak inner join vbap
                                   on vbakvbeln = vbapvbeln
                                    where vbak~vbeln = salno.
    select single tdobject tdname tdid tdspras from stxl
                                                 into (itabstxl-tdobject,itabstxl-tdname,itabstxl-tdid,itabstxl-tdspras)
                                                       where relid = 'TX'
                                                        and tdobject = 'VBBK'
                                                        and tdname = salno    "YOUR OWN TDNAME e,g
                                                        and tdid = 'Z003'
                                                        and tdspras = 'EN'.
call function 'READ_TEXT'
exporting
CLIENT                        = SY-MANDT
    id                            = itabstxl-tdid
    language                      = itabstxl-tdspras
    name                          = itabstxl-tdname
    object                        = itabstxl-tdobject
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
tables
    lines                         = itab-longtext
EXCEPTIONS
ID                            = 1
LANGUAGE                      = 2
NAME                          = 3
NOT_FOUND                     = 4
OBJECT                        = 5
REFERENCE_CHECK               = 6
WRONG_ACCESS_TO_ARCHIVE       = 7
OTHERS                        = 8
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
break abaper.
I HOPE THIS WILL SOLVE THIS WILL SOLVE THE PROBLEM OF THE OTHERS AS WELL.

How to display Long text in a JLabel with multiline??

Hi,
Suppose I have a label that displays a long text....
""This is an example label that displays long text, how to break the line????.........""
how to display it like below with one label?
""This is an example label
that displays long text, how
to break the line????.........""
Thanks

so basically do this
JLabel myLabel = new JLabel();
String theText = "<html>This is an example label<br>
that displays long text, how<br>
to break the line????.........</html>";
myLabel.setText(theText);Obivously, u dont have to use a separate string, u could just call setText or pass it into the JLabel constructor, i just separated it to make it easier to see what your supposed to do.
GOod Luck

How to keep long text in bdc using create_text function module

hi,
ihave bdc in that i having field like long text i have to upload the long text using create_text function module how to use and where to use in bdc. wat parameters i have to pass exactly.
i need some other information like how can i pass this to BDC i got like this .
can u plz check it.
its a length of 255 chaters
perform bdc_field using 'RSTXT-TXLINE(02)'
'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz'
& 'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz'.
perform bdc_field using 'RSTXT-TXLINE(03)'
'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'
& 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'.
perform bdc_field using 'RSTXT-TXLINE(04)'
'yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy'
& 'yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy'.
perform bdc_field using 'RSTXT-TXLINE(05)'
'hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh'
& 'hhhhhhhhhhhhhhhhhhhhhh'.

Hi,
Use this coding where do u want,
data: begin of textline occurs 10.
        include structure tline.
data: end of textline.
start-of-selection.
textline-tdformat = '*'.
textline-tdline = 'TESTING FOR CREATION OF TEXT'.
append textline.
clear textline.
    call function 'CREATE_TEXT'
         exporting
              fid       = '0013'
              flanguage = sy-langu
              fname     = '0095000501'
              fobject   = 'VBBK'
         tables
              flines    = textline
         exceptions
              no_init   = 01
              no_save   = 02.
end-of-selection.

How to add long text in bdc for transaction fb01 ?

IN the existing program of bdc fb01
i have to add a long text field
but it gets stuck while i process in sm35
is there a fm to add the field directly
thanks in a advance

Hi
You can upload the Long texts separately into the transaction using the CREATE_TEXT fun module
Need to pass the correct parameters like OBJECT,ID, OBJECTNAME and LANGuage with the proper declarations.
see the sample code and do accordingly
REPORT zmm_longtext_sm
       NO STANDARD PAGE HEADING
       LINE-SIZE 255.
Description :   This Program is used to Upload the Service Master
             :   Long Texts using the Fun Module CREATE_TEXT
Internal Table for Upload of Long Texts Data
DATA: BEGIN OF itab OCCURS 0,
        asnum like asmd-asnum,    " Service No
        text LIKE tline-tdline, " Long Text
      END OF itab.
To create Long Text lines for CREATE_TEXT function module
DATA:BEGIN OF dt_lines OCCURS 0.
        INCLUDE STRUCTURE tline.   " Long Text
DATA:END OF dt_lines.
Variable declarations for CREATE_TEXT function module
DATA : dl_name TYPE thead-tdname,   " Object Name
       dl_lan TYPE thead-tdspras.   " Language
Constants
CONSTANTS:
Object ID for Long Text of Service Master
c_best     TYPE thead-tdid VALUE 'LTXT',
c_material TYPE thead-tdobject VALUE 'ASMD'. " Object
Parameters
PARAMETERS p_file LIKE rlgrap-filename.
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
Start Of Selection
START-OF-SELECTION.
*To Upload Flat file
CALL FUNCTION 'UPLOAD'
    EXPORTING
      filename                = p_file
      filetype                = 'DAT'
    TABLES
      data_tab                = itab
    EXCEPTIONS
      conversion_error        = 1
      invalid_table_width     = 2
      invalid_type            = 3
      no_batch                = 4
      unknown_error           = 5
      gui_refuse_filetransfer = 6
      OTHERS                  = 7.
Upload the Texts
SORT itab BY asnum.
LOOP AT itab.
    dt_lines-tdformat = 'ST'.
    dt_lines-tdline = itab-text.
    APPEND dt_lines.
    dl_lan = sy-langu.
    concatenate '00000000000' itab-asnum into dl_name.
Call the Function Module to Create Text
    CALL FUNCTION 'CREATE_TEXT'
      EXPORTING
        fid         = c_best
        flanguage   = dl_lan
        fname       = dl_name
        fobject     = c_material
        save_direct = 'X'
        fformat     = '*'
      TABLES
        flines      = dt_lines
      EXCEPTIONS
        no_init     = 1
        no_save     = 2
        OTHERS      = 3.
    IF sy-subrc <> 0.
      WRITE:/ 'Long Text Creation failed for Service No'(001),
             itab-asnum.
    ELSE.
      WRITE:/ 'Long Text Created Successfully for Service No'(002),
             itab-asnum.
    ENDIF.
    AT END OF asnum.
      REFRESH dt_lines.
    ENDAT.
ENDLOOP.
<b>Reward points for useful Answers</b>
Regards
Anji

How to fill Long Text in Accounting document in the item level.

Hi,
I need to fill Long Text field in item level of accounting document from the header texts from Billing header(say billing instructions)
I checked the user exit EXIT_SAPLV60B_008 but it didnt worked in my case. I have read the billing instructions in the Billing header using FM READ_TEXT but I am not able to save this text using FM SAVE_TEXT because for the field Long Text the parameter TDNAME is a concatenation of BUKRS(COmpany code) BELNR(Accounting doc. no.) GHAJR(fiscal year) BUZEI(line item) .
But I am not able to capture this accounting doc. number in the mentioned user exit instead I am getting Sales Invoice number and hence not able to give TDNAME parameter for FM save_text.

Hi Amit,
In application area FINANCIAL ACCOUNTING , go for node LINE ITEM. Here create a step & maintain the prerequisite as per your requirement & in the check you can mention the code or you can direct it to a custom program like ZFI_RGGBR000.
Here while maintaining the check you will get structures BKPF & BSEG in which you will get the desired field you are looking for.
Just try to explore in your system how the other validations are maintained.
After you are done with all your code, you have to run the regeneration program RGUGBR00.
Here utmost care should be taken while running regeneration program, you should select all the checkboxes in the selection screen except GENERATE SETS, GEN SUBSTN ROUTNS IN ALL CLNTS & TRACE PROG. GENERATE CALLS .
Hope this make your doubt clear.
Regards
Abhii

How to save long text for IA01 Transaction using BDC

Hi All,
In my requirement I have to create a Task List Equipment and Task List Functional Location using BDC.Here I need to upload the long text for both IA01 and IA11 transactions.I am using SAVE_TEXT function module to save the text and COMMIT_TEXT also after save text.But I am not able to see the text in IA12 and IA02 transactions.But using READ_TEXT I am able to get the text what updated using SAVE_TEXT.
Please answer for this if any one worked on this requirement <Priority normalized by moderator>
Thanks,
Satya.
Edited by: Vinod Kumar on Jan 2, 2012 9:02 PM

Hi Satya,
There is a simple way to update the long text. There is direct input object in the LSMW for long text.
Object            : 0001
Method          : 0001
Program type : D
SImply go and create the LSMW with first option and follow the steps. No need to call the function modules separately. This standard program will take care of every thing.
If you have multiple lines to populate in the equipment master at the header level then you need two set of files. Then key will be equipment number with leading zeros if it will not be alpha numeric.
1) First file with field EQUNR.
2) Second file will be
EQUNR                          C(018)    Technical identification number
TXPARGRAPH                     C(002)    Tag column
TXLINE                         C(072)    Text editor text line
TEXT_MARK                      C(001)    Description Indicator for RIIBIP00 (IBIP) Processing
Please let me know if you need more in detail.
Thanks,
Satheesh

How to call "long text" of master inspection characteristic in ALV

Similar Messages

Maybe you are looking for