How to call more then one Function modules at the same time

HI ,
How to call more then one FM at the same time .
Modertor Message: Interview-type Questions are not allowed.
Edited by: kishan P on Jan 2, 2012 2:22 PM

They are a few different models of the MacBook Pro ranging from 15.4" i7's to 17" i7's. I would use the same models together though when imaging them just like I do with PC's. For example I would Ghost 5 Lenovo T420 Thinkpads at the same time which all share the same exact specs and config. Looking to do the same with the MBP. I have .dmg image of OSX 10.8.1 on a firewire drive which I'm using. I image all my MBP's with this drive, the only downside is I have to do each MBP one at a time.
Thanks

Similar Messages

Manage more than one news module in the same website

Hi, I am wondering if it is possible to manage more than one News module in the same website and have them all display different content.
Like a news module in the News section displaying announcements and a press section module displaying press related news f. e.

Hello
Possible: yes
Recommended: no
This can certainly be done and Discoverer will not prevent you from having reports that use different business areas as you describe.
However, for management and security purposes it does not make for ease of use. As you know a user has the ability to share a workbook with another user. If they do this then ALL reports within that workbook are shared. If the receiving user does not have access to one or more of the business areas then some reports will run and some will not. This can be very confusing to an end user and a possible nightmare to administer.
My recommendation would be to have a workbook per business area and not mix.
If there is more than one business area per functional area, for example sales and returns, then so long as the users have access to both business areas then you could use a common workbook.
Personally I would not even do this, so my strongest advice would be to have all reports in a workbook written against the same business area.
Hope this helps
Michael

Using more than one front panel at the same time

I have a main program where I can call sub vi’s and then the sub vi’s front panel opens.
I want to use/see/operate more than one front panel at the same time. How I can do it?
For example when I close the main program it won’t close before I close all the sub vi’s front panels.
I use event case to call these sub vi’s. Can I close all vi's using one button?

I wouldn't use subVIs for display, at least not if you plan to have them open all the time. Instead, I would suggest that you have one loop with a FP VI which will talk to the FP all the time and will pass to the data to the other loops through a variable or a functional global.
Then, you can use a tab control to organize your display. If there is no specific reason for not having the graphs in the same VI, you can use a tab control to organize it. If you can't, you can also use subpanels to display the VIs and put several subpanels in your VI.
If you still want to display the VIs seperately, you can control their positions and sizes through their proerty nodes, but I don't think there's any reason for this.
To learn more, I suggest you read the LabVIEW style guide. I think it has some tips about application design.
Try to take over the world!

Using more than one input device at the same time

Is it possible to use more than one input device at the saem time in logic express. For example I have a fire wire input device and a usb input device can I get Express to recognize both of these at once and so have a total of 4 ins which would be great since Im transfering tracks off my ADAT and it would be less track to have to line up.
Thanks

Hi,
yes, it should be possible by creating an aggregate device. Google for it or search this forum. There are many tutorials how to set it up.
Have fun!
Fox

How to call more then one smartforms from SE38 ?

Hello Expertise,
Good Afternoon,
Hope all r fine. Do anybody knows,Is it possible to call more than one smartform from SE38?
If possible then how?
Please help me.
Thanks n regards,
Tripod.

Hi,
what you meaning with: call more than one...
call & show as smartform (print preview ) > I think that´s not possible
Call & create PDF > show as PDF in IExplorer ? > Yes could work when you crate the PDF > and send it to different Internet explorer
Call & create PDF > show as PDF in GUI ? > Yes could work when you crate the PDF > and send it to different Containers...
Best Regards
Robert

MVC - More then one view managed by the same contrler.

Ok, I have been reading and searching examples on the MVC .. but all the examples show just what to do when you have just one view of the model. What I f I have the more the n one view to handle the same model.
As we know the views would need to be registerd inside the controler? How can I do this If I have more then one view?
does anyone have any ideas!?
Would it still be correct if when an action occures on my view instead of the controler capturing that event an handiling, I make my view call the controler to handle it?

So in your opinion is it ok if I call my controler from the action event of my button?
I just did a small example below:
import java.awt.event.ActionEvent;
import javax.swing.*;
import java.awt.event.ActionListener;
public class Starter extends JFrame{
     private Model myModel = new Model();
     private Controler myControler = new Controler(myModel);
     public Starter(){
          JButton myButton = new JButton("Test");
          myButton.addActionListener(new ActionListener(){
               public void actionPerformed(ActionEvent e){
                    myControler.makeAction("Hello");
          this.getContentPane().add(myButton);
          this.pack();
          this.show();
     public static void main(String[] args){
          new Starter();
}As you can see I am calling the controler to manage the new data from the action event of 'myButton' !
Is the above code ok with the spirit of the MVC?

How to allow access to my airport extreme network for more than one wirelss device at the same time

I received a Kobo Vox ereader for Christmas and have not been able to connect to my home wireless network. It works with unsecured networks and I tested it out at an Apple reseller with their airport extreme netwok and it connects fine.
It seems as if I cannot have more than one wireless device connected to my home netork at the same time.
So here is what I did to test this out:
- I powered off the Kobo vox
- I shut down my macbook
- I turned off the modem and unplugged the power cord and removed the cable connection from the modem.
- I also unplugged the airport extreme router.
- I waited for about 15 minutes and then set it all up again and turned on the power to the router and the modem
- I turned on the kobo vox (I left my laptop shut down)
- my kobo vox was able to connected to the internet.
- I powered up my laptop and it couldn't connect to the internet.
So, I went through the above steps again and powered up my laptop first and was able to connect to the internet. I then turned on my Kobo and was not able to connect.
It seems as if I can only have one device connected to my wireless network at one time and that device is the first one to be powered on and connected to the internet.
Am I missing some network or airport extreme settings...
thanks

Try the following on your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Internet icon
Click the Internet Connection tab
Change the setting for Connection Sharing to read Share a public IP address
Click Update

Can I connect more then one cDAQ-9188 in the same network?

Hi, I have one question for you.
Can I connect more then one cDAQ-9188 to moxa EDS-G205-T for querying simultaneously in the same PC?
thanks in advance for any response.

You will need a network switch and make sure they are different IP Addresses, but same subnet.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

HT3529 How do I send a text message to more than one phone number at the same time?

How do I send the same text to more than one phone at the same time?

You'll need to see if there's an app in the App Store that does what you want. Search for "Group SMS" or similar.

Can you use more then one micro photo on the same comput

i have had my micro photo for a year it works great i just bought another one but my computer wont recognize it. what gives?they are the same player zen micro ohoto 8 gigs

It should work fine. Both my Microphoto's work connected on XP Pro at the same time, I just have to keep track of which one has what kind of music. Have you tried scanning for plug and play devices, what kind of operating sys are you running? And what software are you trying to sync with.
Message Edited by VRevolution on 05-23-200706:45 AM

Importing more than one Memory Card at the same time

As a productivity tool for professionnals, Lightroom should allow us to import from more than one source at the same time, as Aperture do. I have a multiple Flash Card reader, and we cannot import all of them at the same time in Lightroom...
I know that I can copy them in a folder, then importing them in LR... But this is time and space consuming if I want to convert the file in DNG : it's okay if photography is a hobby for you, but when it's your full time job, and you often import 4 16Gb Compact Flash Cards at the same time, you don't want to waste time to wait the copying process on your hard disk, and then wait for the "import and convert to DNG" process : this process require to duplicate the files : RAW to DNG on the same hard disk, instead of Direct copy and convert to DNG from your memory cards to your Hard Disk.

You can have multiple remotes for one ATV, and one remote for multiple ATVs.
In our house we have two iPhones and one iPod iPod Touch, all able to control the same ATV at the same time (much to the delight of my daughter who enjoys ousting my music choices for her own).
Why have iPod touch in each room? Its not a wired remote - its a mobile device. Think of a landline vs mobile telephone - landlines are one per room, mobiles are one per person - that's how an iPod is used, even as a remote - you take it with you.
Just like a mobile phone, you'd have one personalised iPod Touch or iPhone per person, not per ATV or room.

WRT54G & Comcast - Operating more than one wireless PC at the same time

First, I want to thank the many advisors and experts that contribute so freely to this knowledge base. I have read the many insights into Comcast/cable modems. Because to that I am able to connect one (1) laptop via wireless to my WRT54G which is attached to the cable modem from Comcast. I had to use "MAC Cloning" to make this wireless connection work. Happy days!
Problem: When I try to bring a second laptop online via the WRT54G using wireless, the laptop seems to receive all the right information (ipcondig /all) but will not connect. Internet Explorer presents the "standard error page" rather than my home page. For example, I want to read my email via laptop #1 and have my wife read her email on laptop #2 - at the same using wireless. Is this possible?
Question: Using the WRT54G and Comcast can I have two or more seperate wireless laptops connect to the Internet at the same time? Note: I am NOT trying to connect the two (2) wireless laptops to each other. Just a good old fashion connection to the Web via the Internet.
Are there other WRT54G owners with Comcast service that have this functionality?
(BTW - I am not trying to bash Comcast. I am just unaware of a solution.)
Thank you in advance.

Adjust the browser settings on the laptop where you don't have Internet...
Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
Yes, it is possible to read mails on both the laptops at the same time...Also it is possible to connect to Internet Wirelessly on multiple computers/laptops at the same time simultaneously...

More than one bluetooth keyboard at the same time?

Hi,
I have a MacBookPro5,2 (that's the model identifier) and I have some problems.
Every day I take this thing to the office, plug in a bunch of USB devices and an external monitor. When I go home I unplug them, take the mac home and then plug them into essentially identical devices at home. The ports are wearing out, the connectors are getting sloppy.
So I'm trying to figure out how to do the same thing with wireless. I don't seem to find anything out there to enable me to use USB devices over bluetooth. That would be ideal, because I've spent quite some time getting the devices I want, and I doubt I'll find equally good ones as wireless.
One thing that's fairly important to me is a completely split keyboard. I use a Kinesis Freestyle keyboard. They don't make a wireless keyboard, and fully split keyboards seem to not support wireless at all.
So what I want to do is take a couple of wireless keyboards and hook them up to the same mac at the same time, and hopefully it will behave as though I'm only using one. Meaning, shift on the left and I on the right produces a capital I.
Does anyone know if this works?
Thanks.

I have an answer. I got a couple keyboards and paired them both to the Mac.
I could put one hand on each and type, but when I hold a modifier on one hand while pressing the key on the other, it does not modify the key.
What a drag.

Having more than one project open at the same time?

I have more than two imovie projects that I need to combine and edit.
Is it possible to open more than one imovie project to the desktop at one time
so I can drag clips back and forth between projects?
jim

Jim,
No it's not.
But you can copy and paste from one project to another.
Or, drag clips to the desktop, then open the other project and drag them in.
Matt

Can I generate pulse trains on more than one counter output at the same time?

I have a PCI 6601 card with a BNC 2121 to connect the signals to two devices. The card is used as a trigger for both devices and I want to be able to generate pulse trains on two output channels at the same time, with a time delay between the two. How do I do that in Labview 7.1 Development with DAQmx?

I feel foolish for not being able to figure this out, but it still doesn't work. Attached is the VI I use now. Counter 0 generates a finite pulse train and I programmed Counter 1 to generate a retriggerable single pulse triggered by CtrOinternaloutput. I still get the same error message: -50103 The specified resource is reserved. The operation could not be completed as specified.
The same happens if I set the trigger for counter 1 at PFI36 (default output of counter 0) or any other PFI line. If I try a pulse train generation on only one of the counters, both work fine.
If I try the example in traditional DAQ for multiple counter outputs with phase delay, it works fine.
Can you tell me what I'm doing wrong?
Attachments:
Shutter_AND_lamp_trigger.vi ‏103 KB

How to call more then one Function modules at the same time

Similar Messages

Maybe you are looking for