How to call more then one smartforms from SE38 ?

Hello Expertise,
Good Afternoon,
Hope all r fine. Do anybody knows,Is it possible to call more than one smartform from SE38?
If possible then how?
Please help me.
Thanks n regards,
Tripod.

Hi,
what you meaning with: call more than one...
call & show as smartform (print preview ) > I think that´s not possible
Call & create PDF > show as PDF in IExplorer ? > Yes could work when you crate the PDF > and send it to different Internet explorer
Call & create PDF > show as PDF in GUI ? > Yes could work when you crate the PDF > and send it to different Containers...
Best Regards
Robert

Similar Messages

How to call more then one Function modules at the same time

HI ,
How to call more then one FM at the same time .
Modertor Message: Interview-type Questions are not allowed.
Edited by: kishan P on Jan 2, 2012 2:22 PM

They are a few different models of the MacBook Pro ranging from 15.4" i7's to 17" i7's. I would use the same models together though when imaging them just like I do with PC's. For example I would Ghost 5 Lenovo T420 Thinkpads at the same time which all share the same exact specs and config. Looking to do the same with the MBP. I have .dmg image of OSX 10.8.1 on a firewire drive which I'm using. I image all my MBP's with this drive, the only downside is I have to do each MBP one at a time.
Thanks

How to retrieve more then one record from database

I am doing a SELECT FROM WHERE SQL statement on a database which returns more then one record. I want to retrieve certain column values from the selected records. How do I do that? If only one record is returned, I know I can do a data operation with operation set to 'Get-Retrieve Values from Record' and Record to operate on set to 'Current-Use current record'. I need to find out how to configure to data operation window in the case more then one record is returned by the preceding SQL statement. Depending on the number of records returned, I can dynamically create array variables to store the 'to be retrieved' column values, just dont know how to retrieve them.
Any help will be greatly appreciated.
Thanks
Anuj

I apologize for not being clear in explaining my problem, perhaps I should have posted an example. Anyways, I was able to figure out the solution. I was doing an 'Open SQL' statement which was selecting multiple records (rows) from a table in the dB. I was storing the number of records returned in a local variable. Then, I wanted to retrieve certain columns of all the selected rows (records). In the "Data operation", I was choosing the 'Record to operate on' as 'Current-Use Current Record'. Changing this field to 'Next-Fetch next record' fixed the problem. I then retrieved the values of those columns into a dynamically created array variable whose dimensions came from the local variable which stored the number of records returned in the SELECT SQL statement.
Thanks
Anuj

How to invoke more then one service from single button click

Hi,
I have created web service data control which contains more then one services.
Now my problem is when I press button, it should take data from my input component and needs to set into multiple services and response of those services should be display to my binding component on the screen.
Regards,
DevangD

See : 9.11 Overriding Built-in Framework Methods
here: http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcservices.htm#sm0222
You can have the code that was generated modified to invoke an additional action - you'll need to add the binding to that action to your page.

How to handle more then one transaction in bdc

how to handle more then one transaction in bdc

Hi vinod,
Call one BDC after the another, Like if u want to create a sales order and then correspondingly display it as well, u can capture the sales order created afer ur first BDC theu the messages mostly in SYMSGV1 and using this u can do a call txn skip first screne of VA03.
If u are talking about session, get 2 session names and move them to different sessions or if both txn are dependant on each other, move it one after the other thru call txn. It is the same, howmany ever trx u wabnt to post thru BDC.
Award points if this helps.

How to restrict more than one delivery from one sales order.

Hi Guys,
We have a requirement that is, system should not allow more than one delivery from one sales order no even if when there is some line item still to be delivered.
We want only one delivery for one sales order and rest of line items should be treated as rejected.
Kindly help
Thanks in advance,
Balu

Hi MP,
Its also not working as we have the requirement is that once sales order is saved and one delivery is created then again if we are adding some more item inthe same sales order then system should not allow to create delivery document as one delivery already created.
Thanks,
Balu.
Edited by: Balu Sajja on Aug 30, 2010 1:29 PM

How to email more than one photo from camera roll

How do e-mail more than one photo from the camera roll at a time?

Go to the camera roll, open the thumbnails, click on the arrow in the top right, select up to 5 photos, click on share in the top left and select email.

How to delete more than one workbook from command line

Hi, I'd like to delete more than one workbook from command line:
The following syntax, it doesn't work....but I followed the manual instructions:
dis51adm.exe /connect eul/eul@uatdb /delete /workbook "ALE_TEST_1, ALE_TEST_2" /eul eul /log D:\Ale\delete.log
where:
eul/eul@uatdb: is the db’s schema/user where the EUL is installed;
/delete "ALE_TEST_1, ALE_TEST_2": is the command to delete the workbooks, specified inside the “” (with the relative path)
/log D:\Ale\delete.log: is the command to write a log’s file named “delete.log” to track the action
The log file says:
22/4/2008 4:00:26 μμ
dis51adm.exe /connect /delete /workbook ALE_TEST_1, ALE_TEST_2 /eul eul /log D:\Ale\delete.log
Document ALE_TEST_1, ALE_TEST_2 not found in EUL.
Internal EUL Error: ObjectNotFound - Can't find EUL element
There are 0 eul elements to be deleted.
Completed deleting eul elements.
22/4/2008 4:00:29 μμ
Anyone can tell me how is the right syntax ?
Thanks in advance
Alex

Hi Rod
I was coming to that conclusion myself but wanted to wait until the other avenues had been exhausted first - aka making sure of the workbook names.
I checked through all of the command line documentation and read nothing which clearly indicated that only one workbook could be processed at a time, other than the fact that the syntax says workbook and not workbooks, which could be a big clue.
I think you are right though in that it has to be one at a time, which would be a pain.
Best wishes
Michael

How To connect More Then One database

How To Connect More the One Database In Single form.
I want to use Access And Oracle In the Same Form.
I want to Transfer data from Access file To oracle database.
Chirag

Hi,
You can do this using EXEC_SQL package. Please see Note 115540.1 on metalink which describes how you can connect to Ms Access and Oracle using EXEC_SQL.
Regards
Kavitha Prakash
Oracle Support

How to send more then one image ore data file

Here
http://www.kfhgd.internetcafe-kaufbeuren.de/upload.php
I use an already
made script. I want to allow users to send more then one
image or data file
to the server. All my efforts for reaching the author had
been
unsuccessfully.
Could someone help me to change the script in my way?
Ciao, servus und salut
Janis

.oO(Janis)
>Here
http://www.kfhgd.internetcafe-kaufbeuren.de/upload.php
I use an already
>made script. I want to allow users to send more then one
image or data file
>to the server. All my efforts for reaching the author had
been
>unsuccessfully.
>
>Could someone help me to change the script in my way?
You need multiple file upload form controls in your HTML and
the PHP
script has to loop through the array that holds the
informations about
all received files.
The script might also need some additional security checks.
Currently it
seems to be possible to upload any arbitrary files, even
other scripts.
With some more tweaking the server might be tricked into
executing them,
which would be a huge security hole.
The receiving script has to check the actual file content,
not just the
file extension or content type, which can both be faked.
Where did you get that script from?
Micha

Need Help, how to create more than one rectangle from one button in one stage of canvas

Dear Guys,
I has problem to create more than one rectangle canvas from one button. here my role to create :
1. I create input size with textfield
2. I click button called "submit query"
3. My web will create a rectangle with specific size.
My problem come when I click again the button, my old rectangle has been remove than my new rectangle has created.
My question is : how I can create more than one without delete/remove the old I was created?
Here my Code :
<head><meta http-equiv="Content-Type" content="text/html; charset=utf-8" /><link rel="stylesheet" type="text/css" media="all" href="css/style.css"><script src="kinetic-v4.7.2.min.js"></script></head> <body><label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5"><br> <label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5"><br> <label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5"><br> <label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="5" maxlength="5"><br> <input name="submit" type="submit"> <script defer>              var stage = new Kinetic.Stage({                container: 'container',                width: 943.5,                height: 254.10              });              var layer = new Kinetic.Layer();              var rectX = stage.getWidth() / 2 - 50;              var rectY = stage.getHeight() / 2 - 50;                            var group = new Kinetic.Group({                draggable: true              });                                         var box = new Kinetic.Rect({                x: rectX,                y: rectY,                width: <?php echo ($_POST['panjang']/10)/1.3; ?>,                height: <?php echo $_POST['lebar']/10; ?>,                //fill: '#00D2FF',                stroke: 'blue',                strokeWidth: 2                //draggable: true              });               var simpleText = new Kinetic.Text({                x: Math.round(box.getWidth() / 2),                y: Math.round(box.getHeight() / 2),                text: '<?php echo $_POST['tinggi'].'/'.$_POST['nam_pac']; ?>',                fontSize: 30,                fontFamily: 'Calibri',                fill: 'blue',              });                                          // add cursor styling              box.on('mouseover', function() {                document.body.style.cursor = 'pointer';              });              box.on('mouseout', function() {                document.body.style.cursor = 'default';              });                            group.add(box);              group.add(simpleText);              layer.add(group);              stage.add(layer);            </script></body>
this is my printscreen may help you to help me :
thanks before to help me
Regards,
Prabowo.

It's work Ken, but if I modify your code into my code.
error again. they say like before (...is undefined)
May You want to check my code
<?php
include('pinambung.php');
?>
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>GI Loading Plan Maker</title>
<meta name="viewport" content="width=device-width" />
<link rel="stylesheet" type="text/css" media="all" href="css/style_2.css">
<script src="js/kinetic-v4.7.2.min.js"></script>
<script src="js/CalendarPopup.js"></script>
<script src="js/jquery-1.10.2.js"></script>
</head>
<body>
<header class="w" id="header"> 
      <img src="images/headers.jpg" width="100%" height="100%" />
</header>
<nav class="w" id="nav">
      <?php include('top.php'); ?>
</nav>
<section class="w" id="main">
      <section id="content">
      <article>
        <h2>Customer Info</h2>
        <form id="myForm" action="insert.php" method="post">
        <label>Customer Name :</label><input name="cs_name" id="cs_name" type="text" size="25" maxlength="50">
        <br>
        <label>Date of Shipment :</label><input name="shipment_date" id="shipment_date" type="text" size="10" maxlength="12" > use format : YYYY-MM-DD
        <br />
        <label>Container Name :</label><input name="con_num" id="con_num" type="text" size="10" maxlength="12">
        <label>Revision :</label><input name="revision" id="revision" type="text" size="5" maxlength="5"><br />
        <label>Prepared by :</label><input name="prepared_by" id="prepared_by" type="text" size="25" maxlength="50">
        <button id="saveinfo">Save As DB</button>
        <button id="saveall">Save As Image</button>
        <button id="print" onclick="window.print();return false">Print</button>
        </form>
        <span id="result"></span>
        <script type="text/javascript" src="js/insert.js"></script>
      </article>
          <br /><br />
      <article>
          <h2>Packing Info</h2>
        <label>Container Type :</label>
        40' HC<input name="con_type" type="radio" id="con_type" value="40hc">
        40'<input name="con_type" type="radio" id="con_type" value="40">
        20<input name="con_type" type="radio" id="con_type" value="20"><br />
        <input name="loadstan" type="button" value="Create Container" id="isSelect">
        <button id="removecon">Remove Container</button>
        <br />
        <label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5">
        <label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5">
        <label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5">
        <label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="20" maxlength="55">
        <input name="loadstan" id="loadstan" type="button" value="Load Standard Packing" onclick="window.open('spk.php', 'winpopup', 'toolbar=no,statusbar=no,menubar=no,resizable=yes,scrollbars=yes,width=300,height=400');">
        <input name="submit" type="submit" value="Create Box">
        <button id="remove">Remove Box</button><br />
      </article>
    </section>
    <aside id="sidebar">
      <label for="layer-to-delate">Select a layer to delete or rotate</label><br />
      <select id="layer-to-delete" size="14"></select><br />
      <input id="delete-layer-button" type="button" value="Delete layer">
      <input id="rotate-layer-button" type="button" value="Rotate box">
    </aside>
    <section id="content2">
      <div id="container">
      </div>
      <script defer>
      function radians (degrees) {return degrees * (Math.PI/180)}
      function degrees (radians) {return radians * (180/Math.PI)}
      function angle (cx, cy, px, py) {var x = cx - px; var y = cy - py; return Math.atan2 (-y, -x)}
      function distance (p1x, p1y, p2x, p2y) {return Math.sqrt (Math.pow ((p2x - p1x), 2) + Math.pow ((p2y - p1y), 2))}
        var stage = new Kinetic.Stage({
            container: 'container',
            width: 943.5,
            height: 254.10
        var layers = new Array();
       function addCont(){
           layer2 = new Kinetic.Layer();
            switch ($('input:radio[name=con_type]:checked').val()){
              case '40hc':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 1190/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 40 HC (11900mm X 2300mm X 2550mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
                 case '40':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 1190/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 40 (11900mm X 2300mm X 2250mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
                 case '20':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 580/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 20 (5800mm X 2300mm X 2250 mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
        function addRect() {
            layer = new Kinetic.Layer();
            var box = new Kinetic.Rect({
                x: 10,
                y: 10,
                width: +(($("#panjang").val()/10)/1.3),
                height: +($("#lebar").val()/10),
                stroke: 'blue',
                strokeWidth: 2
            var group = new Kinetic.Group({
                        draggable: true,
                        snap : true
            var boxLabel = $("#nam_pac").val() + "/H : " + $("#tinggi").val();
            if (($("#panjang").val() && $("#lebar").val()) != 0) {
            var simpleText = new Kinetic.Text({
                x: 10,
                y: 10,
                text: boxLabel,
                fontSize: 12,
                fontFamily: 'Calibri',
                fill: 'red',
            } else {
                var simpleText = new Kinetic.Text({
                x: 10,
                y: 10,
                text: '',
                fontSize: 12,
                fontFamily: 'Calibri',
                fill: 'red',
            group.add(box);
            group.add(simpleText);
            layer.add(group);
            stage.add(layer);
            layers.push(layer);
            $("#layer-to-delete").append("<option>Layer " + boxLabel + "</option>");
        function deleteRect() {
            if($("#layer-to-delete > option").length < 1) return;
            var i = $("#layer-to-delete").prop("selectedIndex");
            layers.splice(i,1)[0].destroy();
            $("#layer-to-delete > option").eq(i).remove();
        function rotateRect() {
            if($("#layer-to-delete > option").length < 1) return;
            var i = $("#layer-to-delete").prop("selectedIndex");
            layers[i].rotateDeg(30);
            layers[i].draw();
        $("#delete-layer-button").click(function(e) {
              deleteRect();
        $("#rotate-layer-button").click(function(e) {
            rotateRect();
        $("input[type=submit]").click(function(e) {
            addRect();
        $("#isSelect").click(function () {
              addCont();
        $("#removecon").click(function () {
              layer2.destroy();
        $(window).keypress(function(e) {
            if(!$(document.activeElement).is("label")) {
                if((e.keyCode || e.which) == 46) {
                    layer.destroy();
            if((e.keyCode || e.which) == 35) {
                    layer2.destroy();
        document.getElementById('saveall').addEventListener('click', function() {
          stage.toDataURL({
            callback: function(dataUrl) {
                  window.open(dataUrl);
        }, false);
      </script>
    </section>
</section>
<footer class="w" id="footer">
    Copyright <a href="login.php" target="_new">©</a> 2013, <a href="http://omhanggar.com" target="_new">created</a><a href="http://intranet.guentner-asia.com" target="_new"> by PT. Güntner Indonesia </a>
</footer>
</body>
</html>
thanks again before,
Prabowo

How to return more then one value in OC4J

Hi,
do I really need to create a serializable object + interface with an reader and writer to pass more then 2 variables back to the client ?
Must this object a java bean ?
.. or does anybody know an easier way to solve this problems.
greetings
Mike

What is your client, and what are you using on the server? Are you trying to return values from a servlet to a web page, or from a servlet to a JSP, or from a EJB to a Java client?
John H. Hi John
We have some services currentliy implementet as PL/SQL stored Procedures on Oracle. They are now accessable with DCE and C-clients.
The task is now to implement the services as Web-Services with SOAP. For that we want to use the OC4J. - as an SOAP Server.
But unforunatly the only examples I found are returning only one parameter.
The Java books learned me to create a class and an interface to pass more parameter to the client. This interface should be inherit from Serializable.
The compiler is happy, the deployment is ok. But when I try to get the wsdl and stub I get something like: "must be an bean" or "have to be a reader and write property.
From my point of view this looks very complicated. I want to use SOAP and therefore all parameters should be passed with one call and the parameter should be explained in the WSDL so that they could be used independed of the programming language and plattform.
When I implement the read and write methods I will pass the parameters in one stream. When I only use Java I think this is a solution - but what is with C or other languages.
Ciao Mike

How to use more than one ipod from one computer

I've got my 30gb ipod set up and working fine from my pc. I've got my wife an ipod nano and want to set her's up totally separately. How can I do this?

When the iPods belong to different people, there are basically three ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library
b) Creating Multiple Libraries in a single Mac or Windows user account
c) Creating multiple Mac or Windows user accounts.
Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish): iPod - Syncing Music
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod and iPhone
Multiple Libraries
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Shift key in Windows when launching iTunes. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library: Using multiple iTunes libraries -Windows
Separate User Accounts
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here: Create A New User Account In Vista

How to send more than one parameter from FORM to REPORT?

Dear all,
i can send one parameter from FORM to REPORT. but when i send more than one parameter it gives error: frm 41214 unable to run report.
here is the code i think the error is in the following line of procedure:
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no p_date_from='||v_date_from||'p_date_to='||v_date_to);
where to place the parameters and is there any space is required?
Thanks
Muhammad Nadeem

Dear Saeed Iqbal,
thanks for you reply.
dear i am using Form 10g run_product is not supported in this version.
i am using RUN_REPORT_OBJECT.
PROCEDURE rep_gl_ledger IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
v_date_from date;
v_date_to date;
v_detail_id_from varchar2(100);
v_detail_id_to varchar2(100);
v_voucher_type varchar2(100);
--req_no char(17);
BEGIN
v_date_from :=      :ledger_para.p_date_from;
v_date_to :=      :ledger_para.p_date_to;
v_detail_id_from :=      :ledger_para.p_detail_id_from;
v_detail_id_to :=      :ledger_para.p_detail_id_to;
v_voucher_type :=      :ledger_para.p_voucher_type;
repid := find_report_object('gl_ledger');
--repid := find_report_object('REPORT80');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_online_FRHome');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no p_date_from='||v_date_from||'p_date_to='||v_date_to);
--SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/* Display report in the browser */
WEB.SHOW_DOCUMENT('http://'||:GLOBAL.G_IP||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?','_blank');
ELSE
     message('Error when running report');
END IF;
END;
Regards:
Muhammad Nadeem

How to return more than one value from a function

hello everybody,
Can anyone tell me how to return more than a single value from a function, the problem is i have 4 points,
2 points form one line ,another 2 points form 2nd line ,each point is 3 dimensional(x,y,z coorinates) so i will pass these values to func(x1,y1,z1,x2,y2,z2,x3,y3,z3,x4,y4,z4), i will find the point of intersecton of two lines and i will get it as x,y,z , now how to return these 3 coordinates,usually the function returns only one value, please help me to solve it out.
Thanks.

I think the easiest way or trick here is (easiest isn't always the best as we know, but atleast this one will work) to create simple data array. and pass that. Create an array with:
<code>
class justArray {
int x=0
int y=0;
int z= 0;
...somewhere
justArray[] points= new justArray[4];
points[0].x= ..
points[0].y= ..
points[0].z= ..
points[1].x= ..
return points[]
</code>

How to call more then one smartforms from SE38 ?

Similar Messages

Maybe you are looking for