How to Call Solution Manager Tcode from ECC
Hi Friends,
I have a requirement to call the Solution manager tcode CRM_DNO_MONITOR from ECC 6.0 using a custom development
There should a custom tcode which the user can execute in ECC to call the transaction in Solution manager . Please let me know if this is possible.
Regards
Sapient
hi ,
for that you have to install solution manager on server to be avalable .
ask your basis person to do that for you .
regards
Deepak.
Similar Messages
-
How to call and reuse smartforms from ECC to CRM?
Hi Experts,
I would like to seek help from all of you, I would like to know if it is possible to call and reuse smartforms created in ECC to CRM environment. The requirement is to create smartforms in ECC (R/3 system) and reuse and call it in CRM environment whenever the 'PREVIEW OUTPUT' button is ticked in CRM webclient. This is to reduce the creation of smartforms from both systems.
Hope to hear from all of you. Your help will be very much appreciated.
Thanks and Regards,
MonicaYou can not reuse it directly but I guess you can download form from ECC and then upload it to CRM. I guess based on your requirement you might end up with few changes to form in CRM to display correct data.
http://help.sap.com/saphelp_nw70/helpdata/en/c9/452f2d33ca11d5b697006094192fe3/content.htm
http://www.howforge.com/how-to-upload-smartforms-from-pc
Smartform Download/Upload problem
Regards,
BJ -
How to take Solution Manager Roles in ECC 6.0?
If I want some PFCG Roles from Solution Manager to ECC 6.0 then what is the easiest way should I used CUA (and select Solution Manager) as a system or what? I will be very thankful who ever will show me the right way. thanks in Advance
Hi
You can do the same in 2 Ways.
1) Make a list of all roles which are required and create TR for these and move it to ECC System.
2) Form PFCG ,download all the roles in bulk and upload the same in ECC System
Thanks & Regards,
Sandeep Alapati -
How to call the 2 Tcodes from single program.
Dear Friends,
I would like to call 2 tcodes form a single program based on some conditions like :
I have a program ZRR wich is madule pool report with selection screen and screen 100, 200.
If I excuted tcode ZXX then I need to call the report with selectin screen ( from there with giving some input data I will go to screen 100 ),
If I excuted tcode ZYY then I need to call the same report skiping the selection screen and need to go directly screen 200.
Pls help me on this if any bady is faced the similar problem.
Thanks,
Sridharhi,
yes you can do this..
try this
create a two screen suppose 9000 and 9001..
then right click on your program name...
create a TCODE say TONE..
in this give the screen number 9000..
now again right click on the program name
create a TCODE say Tsecond
in this give the screen number 9001...
hope this will help you..
Regards
Ritesh J -
How to Link Solution manager with ECC?
Hi Friends,
i am new to solution manager. can any one help me how to link solution manager with other SAP servers like ECC, CRM, SRM? if anybody has paterial for the configuration can u send me, i will be very much thankful for that? my mail id is [email protected], [email protected]
thank you,
devendran.hi Nick thanx for you reply. i was trying your way and the pop-up asking the System name, Product, Product version and the installation number. (is it the right screen which i am opening? if it is not then help me out).
my doubt is what to give in the system name. i had given ECC500 and it is not taking. is there any specific charater to enter i this field? if it is there then where we are maintaining it?
in the product field i entered SAP R/3 Enterprise and Product Version SAP R/3 Enterprise 47x200 from F4 option.
the next doubt is what is the Installation number and what to give in that.
Regards,
Devendran -
How to call a web Service from Oracle Applications?
Hi friends,
I've posted this question on OA Framework forum , but may be it's more appropiated put it here. Sorry for do it again:
It's about how to call a web service from a Form or a .sql (via Request) in Oracle Applications:
Could you please explain here the detailed steps (with code example if it's possible) to invoke a webservice from Oracle Applications?.. how did yo do it...?
I've read differents posts here and the 33097.1 metalink note (by the way, the first recommended link in this note is broken...), but there are lots of theorical concepts and no real examples to see how/from where invoke the WS
I'll have to call one webservice (I suppose the customer will give me the interface implementation)...but I've never did it with Applications so that's why I ask you for all the detailed steps...
I work with Forms 6i, Apps 11.5.10.2 and DB 9.2.0.7.
Thanks a lot.
Jose.Hello Jose,
I did using java program to call BPEL web services in 11.5.10.
I pasted below the metalink note for your reference (Note:250964.1)
The idea is first write a java program to call the webservice (in my case it is calling an BPEL web service, so this may not help directly), test it.
Then port the java program as specified in the note, so that you could call your web service through concurrent manager scheduler.
Is this ok?
Thanks
Arun.
======================================================
Checked for relevance on 25-Apr-2007
Application Install - Version: 11.5.8 to 11.5.10
Goal
====
How to register and create a Java concurrent program for Oracle Applications
Release 11i
Solution
========
1. Create your Java Concurrent Program (JCP) , using a text editor.
/*===========================================================================+
| Concurrent Processing Sample Code |
| |
| FILENAME |
| Hello.java |
| |
| DESCRIPTION |
| Sample Java concurrent program |
| About the simplest possible program, just writes a message to the |
| logfile and output file. |
| |
| HISTORY |
| $Log$ |
| |
+===========================================================================*/
package oracle.apps.fnd.cp.sample;
import oracle.apps.fnd.cp.request.*;
public class Hello implements JavaConcurrentProgram {
public static final String RCS_ID = "$Header$";
public void runProgram(CpContext ctx) {
ctx.getLogFile().writeln("-- Hello World! --", 0);
ctx.getOutFile().writeln("-- Hello World! --");
ctx.getReqCompletion().setCompletion(ReqCompletion.NORMAL, "");
=======================================
End Sample
=======================================
2. Create a sample directory under $JAVA_TOP:
$ mkdir $JAVA_TOPoracle/apps/fnd/cp/sample
3. Copy Hello.java into $JAVA_TOP/oracle/apps/fnd/cp/sample:
$ cp $HOME/Hello.java $JAVA_TOP/oracle/apps/fnd/cp/sample
4. Compile your java program:
javac $JAVA_TOP/oracle/apps/fnd/cp/sample/Hello.java
5. Test at the command line with following syntax:
jre -Ddbcfile=$FND_TOP/secure/your_dbc_file.dbc \
-Drequest.outfile=./outfile \
oracle.apps.fnd.cp.request.Run \
oracle.apps.fnd.cp.sample.Hello
6. Register your custom java concurrent program with Oracle Applications.
a. Navigate: Concurrent > Program > Executable
b. Enter details into the form
Executable: JCPHELLO
Shortname: JCPHELLO
Application: Application Object Library
Execution Method: Java Concurrent Program
Execution File Name: Hello (Insert a name that does not contain space or period)
Execution File Path: oracle.apps.fnd.cp.sample
c. Save the details
d. Navigate: Concurrent > Program > Define
e. Enter details into the form
Program Name: JCPHELLO
Program Shortname: JCPHELLO
Application: Application Object Library
Executable: Choose JCPHELLO from LOV
Executable Options :
f. Save the details
7. Add this new concurrent request to your responsibility request group.
a. Navigate > Security > Responsiblity > Request
b. Query System Administrator
c. Add new row and choose TestJava
d. Save the changes.
8. Run your new Hello Java Concurrent Program
Navigate: Request > Run
References
~~~~~~~~~~~
Oracle Applications Developers Manual for Release 11i A75545-01
==================================================== -
How to call a jar file from oracle forms (6i)
Hi,
I'm working with oracle 6i. I want to know that how to call a .jar file from forms menu. when I use HOST('<path>\test.jar') it is working in 'Client Server' any way. but the problem is I use application server in order to run my form. so my form is in the server and I run the form via clients web browser. in that case above solution will not work. if any body knows how to overcome this problem please reply.
thanks.
dumindaI created a bean area and set the class name as implementation class. within that java bean class I called to a bat file which consists of the execution command of the jar file ( because i don't know how to call .jar file from my bean class directly).
then i tried to run it in application server. its still not running.
can you tell me what i have to do within my bean class? or can you suggest any solution?
thank you. -
How to call a JSP page from Applications menu?
Hi partners,
I am still looking for "how to call a JSP page from Applications menu?", I mean instead of calling a form, I want to call a JSP page which is staying in a OC4J repository which is located in another server.
Any idea will be really appreciated.
Thanks in advance.
Frank Mtz.Hi Frank,
if u know the solution please share it with me. i'm looking for the same scenario.
thanks in advance,
anish -
How to call a shell script from a java code
Hello can any one suggest me how to call a shell script from a java program that takes three parameters.
i have a shell script (msp_restore_gui) when i run this script in the command line in a RHEL5 ,SUSE10 and Debian machine it works fine .I even tested to call it from a java program and it also worked fine but when i used the same in a J2ee application where the user when clicks the restore button in a webserver this inturn sends the request to a java file named BackupManager.java where i call the shell script.But here it fails.Waiting for your suggestions.If you want i can put the code also hereyes the script is in /usr/local/mss/tools/backup and the script (msp_restore_gui) is as follows
#!/bin/sh
TIMESTAMP=`date +%d_%b_%y-%H-%M`
touch /var/backups/mss/mss_restore_"$TIMESTAMP".log
LOGFILE="/var/backups/mss/mss_restore_"$TIMESTAMP".log"
### Explode tgz file
cd /
# Checks to be done:
# root login
# assume he passes the parameter as msp_backup_<timestamp>
# check for the existence of the .tz and fileList.txt
# Checking for the root login and if not logged on as root
# permission will be denied to execute this script
logmsg(){
echo "`date`: $*" >> $LOGFILE 2>&1
echo "$*"
#usage of this script
while [ $# -ne 0 ]
do
case $1 in
-n)
shift
ARCHIVE_NAME=`find / \( -name "$1.tz" -o -name "$1.tgz" \) 2>/dev/null`
FILE_NAME=`find / -name $1_filesList.txt 2>/dev/null`
if [ x$ARCHIVE_NAME = x -a y$FILE_NAME = y ]
then
logmsg "ERROR: Files not found, Restore cannot proceed"
usage
else
tar tvzf $ARCHIVE_NAME > /dev/null 2>&1
if [ $? -ne 0 ]
then
echo "ERROR: The tar file $ARCHIVE_NAME is not proper. Restore cannot proceed"
exit 1
else
echo "Backedup files are present, proceeding with restore......" >> $LOGFILE 2>&1
fi
fi
usage
SKIP_CLEANUP=1
STATUS=1
exit
esac
shift
done
rm -rf ./newfile
curr_ver_file="/usr/local/mss/etc/version"
/usr/local/mss/tools/backup/check_version $curr_ver_file $FILE_NAME
ret_code=$?
echo "Exit value of check_version is $ret_code"
if [ "$ret_code" != 0 ]
then
logmsg "MSP Version not matching. Exiting from restore now...."
errormsg=`cat /usr/local/mss/temp/ver_err_mesg`
logmsg $errormsg
rm -f /usr/local/mss/temp/ver_err_mesg
exit 1
else
echo "Version check is successful"
fi
#### ShutDown MSS########
/etc/init.d/mss stop
sleep 2
### Shutdown semm
/etc/init.d/semm stop
sleep 2
rm -rf `grep -v "MSP Version:" $FILE_NAME`
logmsg "MSP restore in progress......"
tar mxvfz $ARCHIVE_NAME >> $LOGFILE
sleep 5
### Call mysql restore script
/usr/local/mss/bin/mysql_alldb_restore.sh >> $LOGFILE 2>&1
if [ $? -ne 0 ]; then
logmsg "Database restore Failed. Cannot proceed further"
exit 1 ;
else
logmsg "Database restore Succeeded."
fi
### Remove DB Dump Files
rm -f /var/lib/mysql-dumps/*
### Trigger cleanup of airprism database tables
#touch /usr/local/mss/airprism/server/config/reinitdb
### Trigger re-import of software packages
touch /usr/local/mss/swdepot/reimport
### Remove log files under the "apps" directory
find /usr/local/mss/apps -name '*.log*' | xargs rm -f
find /usr/local/mss/logs -follow -name '*[._]log*' | xargs rm -f
if [ $? -ne 0 ]; then
logmsg "MSP restore Failed. Cannot proceed further"
exit 1 ;
else
logmsg "MSP restore Succeeded."
fi
# reinstall_patch is touched so that patches are re-installed after restoring of MSP.
touch /usr/local/mss/patch/bin/reinstall_patch
##### Start MSS
logmsg "restarting MSP server "
/etc/init.d/mss start
sleep 5
### Start semm
/etc/init.d/semm start
sleep 5
logmsg "MSP server is now restarted"
my jsp page backup.jsp is as follows
<%@taglib uri="portlet.tld" prefix="uif" %>
<%@taglib uri="msp-console.tld" prefix="msp" %>
<uif:defineObjects/>
<%@page import="javax.portlet.*" %>
<%@ page import="java.util.Date" %>
<%@ page import="java.util.Vector" %>
<%@ page import="java.text.DateFormat" %>
<%@ page import="com.symbol.mss.console.admin.backup.BackupManager" %>
<%@ page import="com.symbol.mss.console.admin.system.SystemInfoPortlet" %>
<%
String STYLE_NAME = request.getParameter("style");
if (STYLE_NAME == null) STYLE_NAME = STYLE_DEFAULT;
final String ua = request.getHeader("User-Agent");
BackupManager helper = null;
PortletSession portletSession = renderRequest.getPortletSession();
helper = (BackupManager)portletSession.getAttribute("helper");
if (helper == null) {
//System.err.println("Created new BackupManager");
helper = new BackupManager();
portletSession.setAttribute("helper", helper);
final BackupManager backupManager = helper;
String action = "";
final String backupName = renderRequest.getParameter("backupName");
String completePath = backupManager.getBackupDir() + backupName + backupManager.getBackupFileExt();
if (backupName != null) {
action = "backup";
if(backupManager.backup(backupName)) {
SystemInfoPortlet.beginRestartMSP();
} else {
action = "backuperror";
final String cmd = renderRequest.getParameter("submitButton");
final String selectedBackup = renderRequest.getParameter("selectedBackup");
int tarFileStatus =0;
String backupTarFile ="";
String backupFileList ="";
if ("Restore".equals(cmd)) {
if (selectedBackup != null) {
tarFileStatus = backupManager.verifyTarFile(selectedBackup);
//backupTarFile = backupManager.getRestoreFile(Integer.parseInt(selectedBackup));
//backupFileList = backupTarFile.substring(0, backupTarFile.lastIndexOf(backupManager.getBackupFileExt()))+"_filesList.txt";
if (tarFileStatus == 0){
action = "restore";
backupManager.restore(selectedBackup);
SystemInfoPortlet.beginRestartMSP();
} else {
action = "error";
} else if ("Remove".equals(cmd)) {
backupManager.remove(Integer.parseInt(selectedBackup));
DateFormat dateFormat = DateFormat.getDateInstance(DateFormat.SHORT);
PortletURL restoreURL = renderResponse.createActionURL();
%>
<%@ include file="/jsp/core/constants.jspf" %>
<% if (action.length() > 0) {
if ("backup".equals(action))
%>
<p>The MSP Appliance has been shut down in order to create the <%=backupName %> backup file,
and will automatically restart as soon as the file has been created.
To continue your work, please log out of the MSP Console, wait for the appliance
to restart, and then log back in. The amount of time you'll have to wait for the
MSP Appliance to come back online depends on the amount of information you have
stored in the MSP Database.</p>
<p>The full pathname for the backup file is: <%=completePath %></p>
<% }
else if ("restore".equals(action))
%>
<p>The MSP Appliance has been shut down in order to restore from the <%=backupTarFile%> backup file,
and will automatically restart as soon as the restore is complete.
To continue your work, please log out of the MSP Console, wait for the appliance
to restart, and then log back in. The amount of time you'll have to wait for the
MSP Appliance to come back online depends on the amount of information you have
stored in the MSP Database.</p>
<% } else if ("backuperror".equals(action)) { %>
<p><img src="images/dialogue/error_16.gif" class="icon" alt="Notify" /> Errors occurred while taking back up of MSP. Please see the backup service log file for more details.
</P>
<% } else if ("error".equals(action)) {
if (tarFileStatus == 4) { %>
<p><img src="images/dialogue/error_16.gif" class="icon" alt="Notify" /> The backup file <%=backupTarFile%> contains errors. This backup can't be restored. Please restore a valid back up.
</P>
<%} else if (tarFileStatus == 3) { %>
<p><img src="images/dialogue/error_16.gif" class="icon" alt="Notify" /> The backup file list <%=backupFileList %> is missing. This file is required to restoring backup. Please get the backup file list and proceed with restoring backup.</p>
<%} else if (tarFileStatus == 2) { %>
<p> <img src="images/dialogue/error_16.gif" class="icon" alt="Notify" /> The backup file <%=backupTarFile%> contains errors and the backup file list <%=backupFileList%> is missing. This backup can't be restored. </p>
<%} %>
<% }
} else { %>
<p><strong>Note</strong>: Both backup and restore will shut down MSP temporarily. MSP will be unable to collect data from devices, send notifications, or provide MSP Console access during this time. When the backup or restore operation is complete, MSP will come back online automatically.</p>
<h3>Backup</h3>
<form action="<%= restoreURL.toString() %>" method="post">
<p>Please provide a name for your backup. MSP will provide the date automatically in the list of backups.</p>
<p><label for="<uif:namespace />backupName">Name</label> <input type="text" name="<uif:namespace />backupName" id="<uif:namespace />backupName" size="20" maxlength="256" /> <input type="submit" name="<uif:namespace />submitButton" value="Back up now" onclick="return <uif:namespace/>validateName()"/></p>
</form>
<h3>Restore</h3>
<p>This will restore all databases (device assets, collected device data, software packages, policies, etc.) to their state as of the time the backup was made. Changes since then <em>except for backups</em> will be destroyed.</p>
<%
Vector restoreList = helper.getRestoreEntries();
Vector restoreDates = helper.getRestoreDates();
Vector restoreVersions = helper.getRestoreVersions();
Vector filesStatus = helper.getBackupFilesStatus();
%>
<% if (restoreList.size() == 0) { %>
<p>There are no backups currently available.</p>
<% } else { %>
<form action="<%= restoreURL.toString() %>" method="post">
<table class="input-radios" id="<uif:namespace />existingBackups">
<thead>
<tr>
<th></th>
<th>Name</th>
<th>Date</th>
<th>MSP Version</th>
<th>Remarks </th>
</tr>
</thead>
<tfoot>
<tr>
<td colspan="4" class="actionsOnSelected">
<input type="submit" name="<uif:namespace />submitButton" value="Restore" onclick="return confirm('This action requires MSP and all related services to be shut down. Console will be unavailable if the request is submitted. The server will restart automatically once restore has been completed.');" />
<input type="submit" name="<uif:namespace />submitButton" value="Remove" onclick="return confirm('This action will remove the backup archive. You will no longer be able to restore this backup. Continue?');" />
</td>
</tr>
</tfoot>
<tbody><%-- First one (most recent) is checked by default. Every other row has class="portlet-section-alternate". Note that each ID must be unique and must match the value of the "for" attribute on the corresponding "label" element. --%>
<%
for (int i = 0; i < restoreList.size(); i++) {
%>
<tr <%= (i % 2 == 1) ? " class=\"portlet-section-alternate\"" : "" %>>
<td><input type="radio" name="<uif:namespace />selectedBackup" value="<%= i %>" id="<uif:namespace />selectedBackup-<%= i %>" <%= (i == 0) ? "checked=\"checked\"" : "" %> /></td>
<td><label for="<uif:namespace />selectedBackup-<%= i %>"><%= restoreList.elementAt(i) %></label></td>
<td><%= dateFormat.format((Date)restoreDates.elementAt(i)) %></td>
<td><%= restoreVersions.elementAt(i) %></td>
<td><%= filesStatus.elementAt(i) %></td>
</tr>
<%
%>
</tbody>
</table>
</form>
<% } %>
<% } %>
<script type="text/javascript">
<!--//--><![CDATA[//><!--
function <uif:namespace/>validateName() {
var name =document.getElementById("<uif:namespace />backupName");
var msg= "<msp:i18n key="BackupMsg"/>";
var str=name.value;
var re = /^[A-Za-z0-9_]+$/;
if (!str.match(re)) {
alert(msg);
name.focus();
return false;
} else {
return confirm('This action requires MSP and all related services to be shutdown. Console will be unavailable if the request is submitted. The server will restart automatically once backup has been completed.');
//--><!]]>
</script>
and my BackupManager.java is as follows where the code in bold and italic is called the restore()
//============================================================================
// Symbol Technologies P R O P R I E T A R Y S O U R C E C O D E
// C O N F I D E N T I A L
// Copyright (c) 2003 Symbol Technologies. All Rights Reserved.
// All information contained herein is the property of Symbol Technologies,
// or its Licensors, and are protected copyrights and trade secrets, and may
// be covered by U.S. patents. Any reproduction or dissemination of any
// portion of this document, of the software, or other works derived from it
// is strictly forbidden unless prior written permission is obtained from
// Symbol Technologies.
//============================================================================
package com.symbol.mss.sdf.services.backup;
import java.io.*;
import java.sql.Time;
import java.text.DateFormat;
import java.util.logging.FileHandler;
import java.util.logging.Formatter;
import java.util.logging.LogRecord;
import java.lang.Process;
import java.util.*;
import org.apache.avalon.framework.configuration.Configurable;
import org.apache.avalon.framework.configuration.Configuration;
import org.apache.avalon.framework.configuration.ConfigurationException;
import org.apache.avalon.framework.logger.LogEnabled;
import org.apache.avalon.framework.logger.Logger;
import com.symbol.mss.sdf.admin.AdministratorService;
import com.symbol.mss.sdf.backup.*;
import com.symbol.mss.sdf.data.*;
* @author nramaiah
* Service to perform scheduled backups of the system state.
public class BackupManager implements BackupService, DataHandler,
LogEnabled, Configurable {
// MSS Home Path
private static String mssHome = System.getProperty("phoenix.home", File.separator + "usr" +
File.separator + "local" +
File.separator + "mss" +
File.separator);
// Backup related definitions
private static final String BACKUP_LIST_FILE_NAME = "conf" + File.separator + "files_to_backup.txt";
private static final String BACKED_UP_LIST_FILE_NAME_SUFFIX = "_filesList.txt";
private static final String BACKUP_LOCATION = File.separator + "var" + File.separator + "lib" +
File.separator + "mss-backups" + File.separator;
private static final String BACKUP_PARTITION = File.separator + "var" + File.separator + "lib";
private static final String VERIFY_BACKUP = File.separator + "usr" + File.separator + "local" +
File.separator + "mss" + File.separator+"tools"+
File.separator+"backup"+File.separator+"verifyBackup.sh";
// DB backup/restore related definitions
private static final String DB_DUMP_LOCATION = File.separator + "var" + File.separator +
"lib" + File.separator +
"mysql-dumps" + File.separator;
private static final String DB_BACKUP_SCRIPT = "bin" + File.separator + "mysql_alldb_backup.sh";
private static final String DB_RESTORE_SCRIPT = "bin" + File.separator + "mysql_alldb_restore.sh";
// Private variables
private AdministratorService m_admin = null;
private Logger m_logger = null;
private String backupLocation = null;
private String backupListFileName = null;
private String backupPartition = null;
private int backupPartitionLimit = 90;
private String dbDumpLocation = null;
private String dbBackupScript = null;
private String dbRestoreScript = null;
private List servicesBackupList = null;
private String tarFileExtension =".tgz";
private String errFileExtension =".err";
private int exitValue=0;
* Default Constructor
public BackupManager() {
servicesBackupList = new ArrayList();
* Set the administrator service implementation. Link established by Broker service.
* @param admin reference to an implementation of AdministratorService
public void setAdministrator(AdministratorService admin) {
m_admin = admin;
* Set the job publisher service implementation. Link established by Broker service.
* @param jobPublisher reference to an implementation of JobPublisherService
public void setJobPublisher(DataChannel jobPublisher) {
jobPublisher.subscribe(this);
* Gets the backup manager object.
* @return backup manager object
public BackupService getBackupService() {
return this;
* Service lifecycle method.
* @param logger logger object to be used by the service
public void enableLogging(Logger logger) {
m_logger = logger;
* Service lifecycle method.
* @param configuration service configuration object
public void configure(Configuration configuration) throws ConfigurationException {
// Verify MSS Home path
if (!mssHome.endsWith(File.separator))
mssHome += File.separator;
// Get the location where the backup file needs to be placed
backupLocation = configuration.getChild("BackupLocation").getValue(BACKUP_LOCATION);
// Verify backup directory path
if (!backupLocation.startsWith(File.separator))
backupLocation = mssHome + backupLocation;
if (!backupLocation.endsWith(File.separator))
backupLocation += File.separator;
// Get the file listing the files/directories to be backed up
backupListFileName = configuration.getChild("FilesList").getValue(BACKUP_LIST_FILE_NAME);
// Verify backup list file name path
if (!backupListFileName.startsWith(File.separator))
backupListFileName = mssHome + backupListFileName;
// Get the partition where the backups are kept
backupPartition = configuration.getChild("BackupPartition").getValue(BACKUP_PARTITION);
// Verify backup partition path
if (!backupPartition.startsWith(File.separator))
backupPartition = File.separator + backupPartition;
if (backupPartition.endsWith(File.separator))
backupPartition = backupPartition.substring(0, (backupPartition.length()-1));
// Get the limit on the amount of free space on the backup partition
backupPartitionLimit = configuration.getChild("BackupPartitionLimit").getValueAsInteger(backupPartitionLimit);
// Get the location where the DB dump files will be placed
dbDumpLocation = configuration.getChild("DBDumpLocation").getValue(DB_DUMP_LOCATION);
// Verify DB dump directory path
if (!dbDumpLocation.startsWith(File.separator))
dbDumpLocation = mssHome + dbDumpLocation;
if (!dbDumpLocation.endsWith(File.separator))
dbDumpLocation += File.separator;
// Get the name of DB dump backup script
dbBackupScript = configuration.getChild("DBBackupScript").getValue(DB_BACKUP_SCRIPT);
// Verify backup script path
if (!dbBackupScript.startsWith(File.separator))
dbBackupScript = mssHome + dbBackupScript;
// Get the name of DB dump restore script
dbRestoreScript = configuration.getChild("DBRestoreScript").getValue(DB_RESTORE_SCRIPT);
// Verify restore script path
if (!dbRestoreScript.startsWith(File.separator))
dbRestoreScript = mssHome + dbRestoreScript;
* Individual services can supply a list of files/directories to be backed up.
* These are files apart from the files specified in conf/files_to_backup.txt and
* will be backed up as well.
* @param files list of files/directories
public void filesToBackup(List files) {
synchronized(this) {
if (files != null) {
if (files.size() > 0) {
// Add the list contents to the current backup list
for (int i=0; i<files.size(); i++) {
String tStr = (String)files.get(i);
// Check for absolute or relative path
if (tStr.startsWith(File.separator))
servicesBackupList.add(tStr);
else
servicesBackupList.add(mssHome + tStr);
else
m_logger.info("Empty list of filenames. Nothing added.");
else
m_logger.info("Null list of filenames. Nothing added.");
* Individual services can supply a list of files/directories to be backed up.
* Specified files will be added to the file defining the list of files to be backed up.
* @param files list of files/directories
private void persistFilesToBackup(List files) {
synchronized(this) {
if (files != null) {
if (files.size() > 0) {
// Add the list of files provided to the end of file
try {
File file = new File(backupListFileName);
if ((file == null) || (!file.exists()))
file.createNewFile();
// Seek to the end of the file
RandomAccessFile rFile = new RandomAccessFile(file, "rw");
if (rFile != null) {
rFile.seek(rFile.length());
// Write the list contents to the file
for (int i=0; i<files.size(); i++) {
String tStr = (String)files.get(i);
// Check for absolute or relative path
if (tStr.startsWith(File.separator))
rFile.writeBytes(tStr + "\n");
else
rFile.writeBytes(mssHome + tStr + "\n");
else
m_logger.error("Error opening file " + backupListFileName);
rFile.close();
catch (Exception ex) {
ex.printStackTrace();
m_logger.error("Error adding entries to file " + backupListFileName, ex);
else
m_logger.info("Empty list of filenames. Nothing added.");
else
m_logger.info("Null list of filenames. Nothing added.");
* Command to be run during the backup process. Individual services can
* provide shell commands that will be executed before backing up the files.
* @param command shell command to be executed
private void runCommand(String command) {
* Creates a shell script at the specified location that will backup the
* files listed in the List passed in.
* @param scriptFileName location where the script needs to be created
* @param backupFileName name for the tar file being created
* @param backupList list of files to be backed up
private void createBackupScript(String scriptFileName, String backupFileName, ArrayList backupList) throws Exception {
// Create a new StringBuffer to build the contents to be written to the script file
StringBuffer buffer = new StringBuffer();
// Add the initial comment in the start script
buffer.append("#!/bin/sh\n" + "set -x\n\n");
// Check if the partition has enough space
buffer.append("### Check if the partition has enough space\n" +
// "diskUsed=`df -k | grep \"" + backupPartition + "\" | awk '{print $5}' | cut -d\"%\" -f1`\n" +
" diskUsed=`df -k \"" + backupPartition + "\" | awk '{print $5}' | cut -d\"%\" -f1 | grep -v Use`\n" +
"echo \"Partition " + backupPartition + " is $diskUsed% used.\"\n" +
"if [ \"$diskUsed\" -lt \"" + backupPartitionLimit + "\" ]\nthen\n" +
" echo \"Starting backup...\"\n\n");
// Shutdown semmd
buffer.append(" ### Shutdown semm\n" + " /etc/init.d/semm stop\n" +
" sleep 2\n\n");
// MSP Limited release and earlier builds stop mysql DB and backup the
// /var/lib/mysql directory as it is. Starting MSP 1.0 GA release, mysql
// dump script will be integrated which will create sql scripts to
// restore the database.
// Check if mysql dump creation script exists
File mysqlDumpScript = new File(dbBackupScript);
if (mysqlDumpScript.exists()) {
// MSP 1.0 GA and later releases
// Run the script that will generate sql scripts that would re-create the DB as it is
buffer.append(" ### Call mysql dump script\n" +
" " + dbBackupScript + "\n\n");
else {
// MSP Limited release
// Add command to shutdown mysql
buffer.append(" ### Shutdown mysql\n" + " /etc/init.d/mysql stop\n\n");
// Change to root directory and create the tgz file
buffer.append(" ### Create tgz file\n" + " cd /\n");
// Build up the tar file name from the current date and time
String fileName = null;
if ((backupFileName != null) && (backupFileName.length() > 0))
fileName = backupFileName;
else {
// File name not provided by user, build one using the timestamp
Calendar cal = Calendar.getInstance();
Date date = cal.getTime();
fileName = "MSS-"
+ DateFormat.getDateInstance().format(date).replaceAll(" ", "").replaceAll(",", "")+ "-"
+ (new Time(cal.getTimeInMillis())).toString().replaceAll(":", "").substring(0,4);
String tarFileName = fileName + ".tgz";
// Get the current MSP Version
String mspVersion = getMSPVersion();
// Gather all the files to be backed up. Add them to the tar command and
// also dump them into the file maintaining the list of files being backed up
String listStr = "";
for (int i=0; i<backupList.size(); i++)
listStr += (String)backupList.get(i) + "\n";
// Dump the current MSP version and the list of files being backed up into a manifest file
String listFileName = fileName + BACKED_UP_LIST_FILE_NAME_SUFFIX;
RandomAccessFile file = new RandomAccessFile(backupLocation + listFileName, "rw");
m_logger.info("List of files/directories being backed up:\n" + listStr);
file.writeBytes("### MSP Version: " + mspVersion + " ###\n");
file.writeBytes(listStr);
file.close();
// Add the tar command to the script
buffer.append(" echo \"Creating " + backupLocation + tarFileName + "...\"\n" +
" tar cvhfz " + backupLocation + tarFileName + " `grep -v \"MSP Version:\" " +
backupLocation + listFileName + "`\n\n");
// Check if free space on the backup partition has reduced below the limit
// If enough space left, backup is retained, "mss" is made the owner of the files,
// "backup" is made the group the files belong to,
// permissions changed to be "0660" and
// backup action declared a success
// Else, backup files are deleted and declared a failure
buffer.append(" ### Check if the partition has enough space left\n" +
//" diskLeft=`df -k | grep \"" + backupPartition + "\" | awk '{print $5}' | cut -d\"%\" -f1`\n" +
" diskLeft=`df -k \"" + backupPartition + "\" | awk '{print $5}' | cut -d\"%\" -f1 | grep -v Use`\n" +
" echo \"Partition " + backupPartition + " is $diskLeft% used.\"\n" +
" if [ \"$diskLeft\" -gt \"" + backupPartitionLimit + "\" ]\n" +
" then\n" +
" ### Failure\n" +
" echo \"Partition " + backupPartition + " does not have enough space.\"\n" +
" echo \"Backup " + backupLocation + tarFileName + " will be removed.\"\n" +
" rm -f " + backupLocation + fileName + "*\n" +
" echo \"Backup Failed.\"\n" +
" else\n" +
" tar tvzf " + backupLocation + tarFileName + " > /dev/null 2>&1\n" +
" if [ ! -s " + backupLocation + tarFileName + " -o $? -ne 0 ] \n" +
" then\n" +
" echo \"MSP Backup operation is not successful. The tar file " + backupLocation + tarFileName + " contains errors.\"\n" +
" echo \"Please take the backup again\"\n" +
" touch "+backupLocation+fileName+".err\n" +
" else \n" +
" ### Success\n" +
" ### Change the owner, group and permissions for the backup files\n" +
" chown mss " + backupLocation + fileName + "*\n" +
" chgrp backup " + backupLocation + fileName + "*\n" +
" chmod 0660 " + backupLocation + fileName + "*\n" +
" echo \"Backup Completed.\"\n" +
" fi\n" +
" fi\n\n");
// MSP Limited release and earlier builds re-start mysql. Starting
// MSP 1.0 GA release, mysql is not stopped and so re-start is not
// needed. sql scripts created by the dump script get packed into
// the tar file and so are deleted.
// Check if mysql dump creation script exists
if (mysqlDumpScript.exists()) {
// MSP 1.0 GA and later releases
// Remove DB dump files
buffer.append(" ### Remove DB Dump Files\n" + " rm -f " + dbDumpLocation + "*\n\n");
else {
// MSP Limited release
// Start mysql
buffer.append(" ### Start mysql\n" + " /etc/init -
How to call jpf controller method from javascript
Can any one help me how to call pageflow controller method from JavaScript.\
Thanks.Accessing a particular pageflow method from Javascript is directly not possible unless we do some real funky coding in specifying document.myForm.action = xyz...Heres what I tried and it did not work as expected: I found another workaround that I will share with you.
1. In my jsp file when I click a button a call a JavaScript that calls the method that I want in pageflow like this: My method got invoked BUT when that method forwards the jsp, it lost the portal context. I saw my returned jsp only on the browser instead of seeing it inside the portlet on the page of a portal. I just see contents of jsp on full browser screen. I checked the url. This does make the sense. I do not see the url where I will have like test1.portal?_pageLabe=xxx&portlet details etc etc. So this bottom approach will notwork.
document.getElementById("batchForm").action = "/portlets/com/hid/iod/Batches/holdBatch"; // here if you give like test1.portal/pagelable value like complete url...it may work...but not suggested/recommended....
document.getElementById("batchForm").submit;
2. I achieved my requirement using a hidden variable inside my netui:form tag in the jsp. Say for example, I have 3 buttons and all of them should call their own action methods like create, update, delete on pageflow side. But I want these to be called through javascript say for example to do some validation. (I have diff usecase though). So I created a hidden field like ACTION_NAME. I have 3 javascript functions create(), update() etc. These javascripts are called onclick() for these buttons. In thse functions first I set unique value to this hiddent field appropriately. Then submit the form. Note that all 3 buttons now go to same common action in the JPF. The code is like this.
document.getElementById("ACTION_NAME").value = "UPDATE";
document.getElementById("batchForm").submit.
Inside the pageflow common method, I retriev this hidden field value and based on its value, I call one of the above 3 methods in pageflow. This works for me. There may be better solution.
3. Another usecase that I want to share and may be help others also. Most of the time very common usecase is, when we select a item in a drop bos or netui:select, we want to invoke the pageflow action. Say we have 2 dropdown boxes with States and Cities. Anytime States select box is changed, it should go back to server and get new list of Cities for that state. (We can get both states and cities and do all string tokenizer on jsp itself. But inreality as per business needs, we do have to go to server to get dynamic values. Here is the code snippet that I use and it works for all my select boxes onChange event.
This entire lines of code should do what we want.
<netui:anchor action="selectArticleChanged" formSubmit="true" tagId="selectPropertyAction"/>
<netui:select onChange="document.getElementById(lookupIdByTagId('selectPropertyAction',this )).onclick();" dataSource="pageFlow.selectedArticleId" >
<c:forEach items="${requestScope.ALL_ARTICLE}" var="eachArticle">
<%-- workshop:varType="com.hid.iod.forms.IoDProfileArticleRelForm" --%>
<netui:selectOption value="${eachArticle.articleIdAsString}">${eachArticle.articleItemName}</netui:selectOption>
</c:forEach>
</netui:select>
See if you can build along those above lines of code. Any other simpler approches are highly welcome.
Thanks
Ravi Jegga -
How to integrate Solution Manager system to Enterprise Portal
Hi all,
HOW TO INTEGRATE SOLUTION MANAGER SYSTEM TO ENTERPRISE PORTAL SYSTEMHi,
First establish SSO between portal and solution manager.
make the iview from com.sap.portal.epsolman.EPSolman
check the link for help
ep and solution manager support desk
Thanks
Santosh -
How to call backing bean method from java script
Hi,
I would like to know how to call backing bean method from java script.
I am aware of serverListener and [AjaxAutoSuggest article|http://www.oracle.com/technology/products/jdev/tips/mills/AjaxAutoSuggest/AjaxAutoSuggest.html]
but i am running in to some issues with [AjaxAutoSuggest article|http://www.oracle.com/technology/products/jdev/tips/mills/AjaxAutoSuggest/AjaxAutoSuggest.html]
regarding which i asked for help in other thread with subject ....Question on AjaxAutoSuggest article (Ajax Transactions Using ADF and J...)
The reason why i posted is ( though i realise both are duplicates) .. that threads looks as a specific question to that article hence i would like to ask the quantified problem is asked in this thread.
So could any please letme know how to call backing bean method from java script
Thanks
Murali
Edited by: mchepuri on Oct 24, 2009 6:17 PM
Edited by: mchepuri on Oct 24, 2009 6:20 PMHello,
May know how to submit a button autoamtically on onload of page with clicking a welcome alert box. the submit button has managed button too to show a message on console using SOP.
the problem is.
1. before loading the page a javascript comes on which i clicked ok
2. the page gets loaded and the button is there which gets automatically clicked and the managed bean associated with prints a message on console using SOP.
I m trying to do this through server listener and click listener. the code is(adf jspx page)
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" binding="#{backingBeanScope.backing_check4.d1}">
<af:form id="f1" binding="#{backingBeanScope.backing_check4.f1}">
<af:commandButton text="commandButton 1"
binding="#{backingBeanScope.backing_check4.cb1}"
id="cb1" action="#{beanCheck4.submit1}"/>
<af:clientListener type="click" method="delRow"/>
<af:serverListener type= "jsServerListener"
method="#{backingBeanScope.backing_check4.submit1}"/>
<f:facet name="metaContainer">
<af:resource type ="javascript">
x=confirm("hi");
// if(x){
delRow = function(event){
AdfCustomEvent.queue(event.getSource(), "jsServerListener", {}, false);
return true;
</af:resource>
</f:facet>
</af:form>
</af:document>
</f:view>
<!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_check4-->
</jsp:root>
the backing bean code is -----
public class classCheck4 {
public classCheck4() {
public String submit1() {
System.out.println("hello");
return null;
} -
How to call a maintenance view from a program
Hello Abapers,
Can anybody explain with some examples. How to call a mainetenance view from a program.
Thanks
Ranjith.Use FM 'VIEW_MAINTENANCE_CALL'.
REPORT zmaintaintest.
VARIABLES / CONSTANTS
CONSTANTS:
c_action(1) TYPE c VALUE 'U', "Update
c_viewname TYPE tabname value 'ZEMP_EXAMPLE', "View Name
c_field(6) TYPE c VALUE 'EMPNO'. "Field Name
INTERNAL TABLES
DATA: itab_rangetab TYPE STANDARD TABLE OF vimsellist,
v_empno TYPE zempno,
wa_rangetab TYPE vimsellist.
SELECTION SCREEN
PARAMETERS: p_empno TYPE zempno OBLIGATORY. "Emplyee ID
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
Chcking the existence of the user in EMPLOYEE table
PERFORM validate_employee.
START_OF_SELECTION
START-OF-SELECTION.
This will restrict the user view so that user can only view/change
Table data corresponding to his/her Employee ID
PERFORM define_limited_data_area.
Displaying table maintenance view for a particular employee ID
PERFORM call_view_maintenance.
*& Form validate_employee
Validate plant entered in the selection screen
FORM validate_employee.
SELECT SINGLE empno u201CEmployee ID
FROM zemp_example u201CEmployee Table
INTO v_empno
WHERE empno = p_empno.
IF sy-subrc <> 0.
MESSAGE 'Not an Valid User' TYPE 'I'.
ENDIF.
ENDFORM. "validate_employee
*& Form DEFINE_LIMITED_DATA_AREA
To restrict the user view so that user can see/change table data
corresponding to his employee ID. Here one internal table is
getting populated with field name as u201CEMPNOu201D (Key field of the table)
And value as given by user in Selection Screen and this is passed as
Parameter in function module 'VIEW_MAINTENANCE_CALL'
FORM define_limited_data_area.
CLEAR wa_rangetab.
wa_rangetab-viewfield = c_field.
wa_rangetab-operator = 'EQ'.
wa_rangetab-value = p_empno.
APPEND wa_rangetab TO itab_rangetab.
ENDFORM. "define_limited_data_area
*& Form CALL_VIEW_MAINTENANCE.
Displaying table maintenance view for a particular employee ID
FORM call_view_maintenance.
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
action = c_action
view_name = c_viewname
TABLES
dba_sellist = itab_rangetab.
ENDFORM. "call_view_maintenance
Regards,
Joy. -
How to call a SQL function from an XSL expression
Hi
In R12, in Payroll Deposit adivce/Check writer, We need to sort the earnings tag <AC_Earnings> in to two different categories as regular and other earnings. In the DB and form level of element defintiion we have a DFF which differentiates between the two kinds of earnings. But the seeded XML that is gerneated by the check writer does not have this field.
The seeded template displays all the earnings in one column. How can we achieve this in the template without modifying the seeded XML.
The one approach i have is to write a function and based on the return value sort the data. For this I need to know :
1) How to call a SQL function from an XSL expression that is allowed in BI template.
If anyone ahs faced similar requirements please share your approach.
Thanks
SrimathiThank u..
but i'd seen that link wen i searched in google..
Is it possible without using any 3rd party JARs and all?
and more importantly plz tell me what should be preferred way to call a javascript function?
Do it using addLoadEvent() or Windows.Load etc
OR
Call it thru Xsl? (I donno how to do dis)
Thanks in Advance..
Edited by: ranjjose on Jun 3, 2008 8:21 AM -
How to call a web service from forms 9i
Hello all, I was trying to run the example on this website that shows how to call a webservice from forms, and I recieved an error. I am at the last step, where it tells me to create a button and add a when button pressed trigger. Here is the code I am using from the example:
DECLARE
jo ora_java.jobject;
rv ora_java.jobject;
ex ora_java.jobject;
BEGIN
jo := CurrencyExchangeServiceStub.new;
--This will get the exchange rate from US Dollars to UK Sterling.
rv := CurrencyExchangeServiceStub.getRate(jo,'USA','UK');
message (float_.floatValue(rv));
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
message(Exception_.toString(ex));
END;
It gives me an error on"Exception_.tostring" component must be declared. Does anyone have any suggestions? I am trying to figure out how to call an external WS from a form. Thanks.IN forms Builder under Import java classes
Change the Import Classes field to java.lang.Exception and press Import. This will create a PL/SQL package for the Exception Java class. While this is not essential, it does make error reporting easier. Now press Close to dismiss the dialog.
Maybe you are looking for
-
Why does iTunes say that I have to remove and reinstall it every time I connect my iPhone 4?
Okay, so I just received my new iPhone 4 (my first as well) and am trying to activate it. I have iTunes on my computer already. When I connected my iPhone to my laptop after launching iTunes, a dialog box with an error message saying something like
-
Received Mac Book Pro 13" uncharged, is it normal?
I received my new Mac Book Pro 13" yesterday. Welcome pack says that all Apple devices are charged and ready to use... but it didn't power on. I plugged in to charge it and it could start with battery at 0%. I shutdown and it charged fully in 2 hours
-
How to de-schedule a background job?
Dear all, I have scheduled a background ABAP report titled ZHRWFIT19 at SM36 to trigger a workflow. Initially I scheduled this background job to 9 A.M. Later I changed to schedule this background job to 10 A.M at SM37. Now my work
-
Language - Dependent Text in web template
Hi All, I am using BI7.0 can anybody please tell me how to maintain 'LANGUAGE DEPENDENT TEXT'. I have gone through various documents that provides the way to maintain it using the report, i did the same (although maintaining text through report is ob
-
Help on peculiar connection timeout
I've recently been unable to connect to a site (www.bdm.nsw.gov.au) that I used to access all the time. Now I always get a connection timed out message. The problem is independent of the browser I try to connect with: firefox, chromium, w3m, lynx, al