How to call swf in swf at proper x,y co-ordinate

Hello,
can any tell me how to call a swf into anather swf but at
proper x and y co-ordinates.
thnx n regards
justbipin

You need to create a placeHolder movieClip and load the other
swf into it
and then set the x,y of that placeHolder clip.
placeHolder.loadMovie("mySWF.swf")
placeHolder._x=100;
placeHolder._y=80;
Dan Mode
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
"justbipin" <[email protected]> wrote in
message
news:e80cs7$4mo$[email protected]..
> Hello,
> can any tell me how to call a swf into anather swf but
at proper x and y
> co-ordinates.
> thnx n regards
> justbipin

Similar Messages

How to call swf file within another swf file using xml

hii,
I am facing some problem to call a swf file via xml when this xml file loaded it calls another swf file which includes a new xml file. now if i call this nested swf calling without xml it works but in case case of xml it is not showing the result. i m confused. how to nested xml file calling done in as2/as3. i need some logics. thanks in advance

This is the AS3 forum and your posting involves AS2 code. You should repost in the AS2 forum...
http://forums.adobe.com/community/flash/flash_actionscript
Aside from that, your problem might lie in the following lines...
_root.createEmptyMovieClip("sub_container1", 1);
loadMovie(sub_SWFPath[1].attributes.url, "sub_container1");
You create the new movieclip, sub_container1, in the _root, but you do not assign the loadMovie to load into that same movieclip (unless you have a _lockroot = true assigned in your sub-swf). In any case, you should repost in the AS2 forum to pursue resolution.

Is there any solution to ged rid of an infected file called,,, Swf.Exploit.CVE_2014_0564-2

is there any solution to ged rid of an infected file called,,, Swf.Exploit.CVE_2014_0564-2 ?
I don't know how i got this infected file>

It appears to be a cache file, a copy of a website you visited at some point. Empty your browser cache and it should be gone. If you're using Safari https://answers.syr.edu/display/software/Clear+Cache+in+Safari+version+7+on+Mac+ OSX

How to embed swf in fla?

can anyone help me how to embed swf to an fla?
thnx!

If the swf has actionscript in it, then you cannot embed it and still have it work (it will lose its code), so you need to load the file dynamically instead.

How to make SWF in GoLive show in IE in v5, 6 or 8

I would like to get a Flash file to work in Internet Explorer
v5, 6 and 8. I am creating a site and the flash clip won't play in
these browsers (but will in IE v7). Does anyone have any ides?
Thanks.

EDIT: I see you mentioned that yourself but the header of your question was 'How to make SWF file work in interactive PDF'. Strictly speaking, forgetting the iPad, the answer would be: export the animation from InDesign to SWF, delete the animation and now place the exported SWF back on the page. Then export to interactive PDF.
Still won't work on iPad however!
On Desktop this will work in PDF *if* Flash player is installed on that desktop for Adobe reader/Acrobat 10 and later; versions 9 and earlier have 'build in' Flash players...

How to control swf file loaded in flash builder project?

Condition :
1. I have a swf file presentation.
2. A flex mobile project using flash builder 4.6 with its default SDK.
What i want :
1. Include those swf file into my flex mobile project and interact with those swf like i run it on flash player for PC. Shown here >>
http://prntscr.com/1pmio
What i've tried :
1. Call swf file using swfloader and it work(on my pc). Here is my code >>
http://prntscr.com/1pmjdl
Problem :
1. I cant interacted with swf file presentation. If i click on screen, it get error code >> "Error #2025: The supplied DisplayObject must be a child of the caller" and another error. Here is error warning >>
http://prntscr.com/1pmkcr
I dont want to upload the swf file into a web and load it remotely because i want the swf file available offline. Im newbie in flex, please tell me clearly. i have downloaded Flex in a week video training but gets nothing. searching for another problem which may same, but i didnt get any answer.
Please Help.
Message was edited by: blackquipment for image fix

Some loaded SWFs may not be compatible with Flex. Try making a simpler SWF (like one that just draws a circle where you click) and see if it can be loaded and interacted with.
-Alex

How to use swf object

Hi have been trying to get my head around how to use swf object, I know very little javascript and so am having difficulty in modifying the code to suit my needs. This is my page which I have used dreamweaver cs3 and have used insert>media>flash and it is working well but does not validate. I would really appreciate if somebody could write the exact html code I need to convert this to swf object.
http://www.kimberleywebdesign.com.au/Links.html

You should be able to just declare a variable outside of the onComplete function and assign it the loaded object when the file loads...
var loadedSWF:MovieClip;
function loadComplete(e:Event):void {
     removeChild(old_mc);
     addChild( DisplayObject(LoaderInfo(e.target).content) );
     loadedSWF = MovieClip(e.currentTarget.content);
function doStuffToSWF(){
      loadedSWF.something....

How to fit swf completely in browser

hi there
can someone help me to find out that how to insert swf file
into a browser with 100% width and height, the problem i m facing
is with resizing the browser as the swf does't get fit into browser
either with height or width, i m giving site reference (
http://www.christiansparrow.com)
for what exactley i m looking for.
if u can pls visit my site( www.websells.com/sf) to get to
know what is the thing bothering me, well whn u resize the window u
ll see black borders on the horizontal sides of the site which has
to be covered by the swf showing there.
pls revert me soon.
thanx

Hey-
I'm having the same problem, and i wasn't able to find that
resizing code anywhere... any chance you could help me out and tell
me how to do it?
www.nicksdesign.com/flash
Is where the code would be placed... because if a user is on
different screen resolutions than what the site is designed at,
they are required to scroll vertically and horizontally to view
page.
Best,
Nick Smith

How I use swf in swf (nested) ?

Flash is case-sensitive in naming(symbols,form
fields,components) ?
How I use ScrollPane ?
How I use swf in swf (nested) ?

What I've done in the past is created an image using an image editor like MS Paint, then change the image to black/white instead of color, and used grey instead of black. Then upload the image via SE78. Then you can include the image in your sapscript using the BITMAP statement. Search for watermark in this forum and you should get some more info.
BITMAP ZIMAGE OBJECT GRAPHICS ID BMAP TYPE BCOL
Regards,
Rich Heilman

How to insert SWF into Presenter.

Hello everyone.
I've got a very nasty issue. I created a slideshow in
Captivate and saved it as SWF file.
When I try to import/insert SWF in a presentation (in
Presenter) as "slide animation", I get nothing - the SWF still
isn't imported.
Also, I can do import SWF, when choose the "insert as sidebar
animation" option.
Any ideas how to insert SWF?
I use PowerPoint 2007 and Captivate 3.

Are you facing this problem for this Captivate createdswf or
other swf file as well ? By other swf file i mean created using
Flash Authoring or any other tool.
Also check if swf plays in slideshow of PowerPoint when
inserted using Presenter.

How to convert swf to mp4

Please help me to how to convert swf format into the MP4!!!

Note that you use Adobe Media Encoder to create .mp4 files, not the After Effects render queue. You can add After Effects compositions to the Adobe Media Encoder encoding queue.

How to use swf file for Spark Skin

Hi all
I have little confuse about how to use swf file with Spark Skin,
in Flex3 , i use Flex Skin Design Extension for Flash to deal with skin ,
so basically , I just create a swf file and import to the project , then everything is ok
but , seem that not working in flex4 , spark skin.
1` I can't find the Flex Skin Design for the FlashCs4
2` I try to use FlashCs3 version to import the skin art to the project , but seemed not working.
3` I Google and check the Flex4 Help , seemed Spak skin need the Skin-Class , which I don't know how to use that with swf file
what I have searched is how to use FXG , or some jpg file in that skin class, none of them are use swf file.
so , is there any way that let user use the swf file to deal with the skin?
is the Flex Skin Design can use in Flex4?
Thanks

Hello,
I'm new to Flex, but have come to it from Flash Pro. I'd like to know the same thing. I think I found the answer here:
http://www.flashallys.com/blog/spark-button-skinning-with-flash-symbols/
However my question is now: Is this a good approach to use?
99% of the googling I've done tells me to skin components with fxg files. I've tried that by creating graphics and exporting from flash, but using swfs containing lots of graphics is much faster so I'd rather use that.
The other thing I've done is to create custom components using these helpful tutorials:
Creating component in flash:
http://www.webkitchen.be/2008/12/12/video-tutorial-make-flex-components-with-flash-cs4/
Dealing with Resizing with method overrides for your flash component:
http://www.psyked.co.uk/flex/creating-flex-components-the-easy-way-for-flash-ide-converts. htm
This allows me the flexibility of Flash Pro design with the layout, transistions, data binding etc from Flex.
So my question is: Is this approach (skinning spark components with swfs, and using custom swc components made in flash) a bad idea for any reason? E.g. does it create slow mobile apps?
Cheers
Chris

Urgent how to call Webservice

I have call the Webservice in flex2 successfully however
after I deploy EAR / WAR, an error occur:
MessageError message='Unknown destination 'Default HTTP'
Anyone can help?

Following is how I call the webservice in mxml:
<mx:WebService id="wsBlogAggr" wsdl="
http://ip_address?WSDL"
useProxy="true" showBusyCursor="true">
<mx:operation name="getAllAccounts"
result="getAllAccountsInStringResult(event)"/>
<mx:operation name="removeAccount"
result="removeAccountResult(event)"/>
</mx:WebService>
private function UIComplete():void
wsBlogAggr.getAllAccountsInString.send();
private function
getAllAccountsInStringResult(ev:ResultEvent):void
// do sth
I think my code is right. As I can call the webservice in
flex2 server successfully, however, when i just open the generated
swf file, it already show me the error about
[RPC Fault faultString="Send failed"
faultCode="Client.Error.MessageSend" faultDetail="Unable to load
WSDL. If currently online, please verify the URI and/or format of
the WSDL (
http://ip_address?WSDL)"
I verified that I can access to the wsdl url.
So, after I deploy the EAR / WAR, also display that error to
me.

How to call a shell script from a java code

Hello can any one suggest me how to call a shell script from a java program that takes three parameters.
i have a shell script (msp_restore_gui) when i run this script in the command line in a RHEL5 ,SUSE10 and Debian machine it works fine .I even tested to call it from a java program and it also worked fine but when i used the same in a J2ee application where the user when clicks the restore button in a webserver this inturn sends the request to a java file named BackupManager.java where i call the shell script.But here it fails.Waiting for your suggestions.If you want i can put the code also here

yes the script is in /usr/local/mss/tools/backup and the script (msp_restore_gui) is as follows
#!/bin/sh
TIMESTAMP=`date +%d_%b_%y-%H-%M`
touch /var/backups/mss/mss_restore_"$TIMESTAMP".log
LOGFILE="/var/backups/mss/mss_restore_"$TIMESTAMP".log"
### Explode tgz file
cd /
# Checks to be done:
# root login
# assume he passes the parameter as msp_backup_<timestamp>
# check for the existence of the .tz and fileList.txt
# Checking for the root login and if not logged on as root
# permission will be denied to execute this script
logmsg(){
echo "`date`: $*" >> $LOGFILE 2>&1
echo "$*"
#usage of this script
while [ $# -ne 0 ]
do
case $1 in
-n)
shift
ARCHIVE_NAME=`find / $ -name "$1.tz" -o -name "$1.tgz" $ 2>/dev/null`
FILE_NAME=`find / -name $1_filesList.txt 2>/dev/null`
if [ x$ARCHIVE_NAME = x -a y$FILE_NAME = y ]
then
logmsg "ERROR: Files not found, Restore cannot proceed"
usage
else
tar tvzf $ARCHIVE_NAME > /dev/null 2>&1
if [ $? -ne 0 ]
then
echo "ERROR: The tar file $ARCHIVE_NAME is not proper. Restore cannot proceed"
exit 1
else
          echo "Backedup files are present, proceeding with restore......" >> $LOGFILE 2>&1
fi
fi
usage
SKIP_CLEANUP=1
STATUS=1
exit
esac
shift
done
rm -rf ./newfile
curr_ver_file="/usr/local/mss/etc/version"
/usr/local/mss/tools/backup/check_version $curr_ver_file $FILE_NAME
ret_code=$?
echo "Exit value of check_version is $ret_code"
if [ "$ret_code" != 0 ]
then
logmsg "MSP Version not matching. Exiting from restore now...."
errormsg=`cat /usr/local/mss/temp/ver_err_mesg`
logmsg $errormsg
rm -f /usr/local/mss/temp/ver_err_mesg
exit 1
else
echo "Version check is successful"
fi
#### ShutDown MSS########
/etc/init.d/mss stop
sleep 2
### Shutdown semm
/etc/init.d/semm stop
sleep 2
rm -rf `grep -v "MSP Version:" $FILE_NAME`
logmsg "MSP restore in progress......"
tar mxvfz $ARCHIVE_NAME >> $LOGFILE
sleep 5
### Call mysql restore script
/usr/local/mss/bin/mysql_alldb_restore.sh >> $LOGFILE 2>&1
if [ $? -ne 0 ]; then
logmsg "Database restore Failed. Cannot proceed further"
exit 1 ;
else
logmsg "Database restore Succeeded."
fi
### Remove DB Dump Files
rm -f /var/lib/mysql-dumps/*
### Trigger cleanup of airprism database tables
#touch /usr/local/mss/airprism/server/config/reinitdb
### Trigger re-import of software packages
touch /usr/local/mss/swdepot/reimport
### Remove log files under the "apps" directory
find /usr/local/mss/apps -name '*.log*' | xargs rm -f
find /usr/local/mss/logs -follow -name '*[._]log*' | xargs rm -f
if [ $? -ne 0 ]; then
logmsg "MSP restore Failed. Cannot proceed further"
exit 1 ;
else
logmsg "MSP restore Succeeded."
fi
# reinstall_patch is touched so that patches are re-installed after restoring of MSP.
touch /usr/local/mss/patch/bin/reinstall_patch
##### Start MSS
logmsg "restarting MSP server "
/etc/init.d/mss start
sleep 5
### Start semm
/etc/init.d/semm start
sleep 5
logmsg "MSP server is now restarted"
my jsp page backup.jsp is as follows
<%@taglib uri="portlet.tld" prefix="uif" %>
<%@taglib uri="msp-console.tld" prefix="msp" %>
<uif:defineObjects/>
<%@page import="javax.portlet.*" %>
<%@ page import="java.util.Date" %>
<%@ page import="java.util.Vector" %>
<%@ page import="java.text.DateFormat" %>
<%@ page import="com.symbol.mss.console.admin.backup.BackupManager" %>
<%@ page import="com.symbol.mss.console.admin.system.SystemInfoPortlet" %>
<%
     String STYLE_NAME = request.getParameter("style");
     if (STYLE_NAME == null) STYLE_NAME = STYLE_DEFAULT;
     final String ua = request.getHeader("User-Agent");
     BackupManager helper = null;
     PortletSession portletSession = renderRequest.getPortletSession();
     helper = (BackupManager)portletSession.getAttribute("helper");
     if (helper == null) {
          //System.err.println("Created new BackupManager");
          helper = new BackupManager();
          portletSession.setAttribute("helper", helper);
     final BackupManager backupManager = helper;
     String action = "";
     final String backupName = renderRequest.getParameter("backupName");
     String completePath = backupManager.getBackupDir() + backupName + backupManager.getBackupFileExt();
     if (backupName != null) {
          action = "backup";
     if(backupManager.backup(backupName)) {
          SystemInfoPortlet.beginRestartMSP();
          } else {
               action = "backuperror";
     final String cmd = renderRequest.getParameter("submitButton");
final String selectedBackup = renderRequest.getParameter("selectedBackup");
int tarFileStatus =0;
String backupTarFile ="";
String backupFileList ="";
     if ("Restore".equals(cmd)) {
if (selectedBackup != null) {
     tarFileStatus = backupManager.verifyTarFile(selectedBackup);
     //backupTarFile = backupManager.getRestoreFile(Integer.parseInt(selectedBackup));
     //backupFileList = backupTarFile.substring(0, backupTarFile.lastIndexOf(backupManager.getBackupFileExt()))+"_filesList.txt";
               if (tarFileStatus == 0){
     action = "restore";
     backupManager.restore(selectedBackup);
                    SystemInfoPortlet.beginRestartMSP();
          } else {
               action = "error";
} else if ("Remove".equals(cmd)) {
backupManager.remove(Integer.parseInt(selectedBackup));
     DateFormat dateFormat = DateFormat.getDateInstance(DateFormat.SHORT);
     PortletURL restoreURL = renderResponse.createActionURL();
%>
<%@ include file="/jsp/core/constants.jspf" %>
<% if (action.length() > 0) {
     if ("backup".equals(action))
%>
     <p>The MSP Appliance has been shut down in order to create the <%=backupName %> backup file,
          and will automatically restart as soon as the file has been created.
          To continue your work, please log out of the MSP Console, wait for the appliance
          to restart, and then log back in. The amount of time you'll have to wait for the
          MSP Appliance to come back online depends on the amount of information you have
          stored in the MSP Database.</p>
     <p>The full pathname for the backup file is: <%=completePath %></p>
<%     }
     else if ("restore".equals(action))
%>
     <p>The MSP Appliance has been shut down in order to restore from the <%=backupTarFile%> backup file,
          and will automatically restart as soon as the restore is complete.
          To continue your work, please log out of the MSP Console, wait for the appliance
          to restart, and then log back in. The amount of time you'll have to wait for the
          MSP Appliance to come back online depends on the amount of information you have
          stored in the MSP Database.</p>
<%     } else if ("backuperror".equals(action)) { %>
          <p><img src="images/dialogue/error_16.gif" class="icon" alt="Notify" /> Errors occurred while taking back up of MSP. Please see the backup service log file for more details.
          </P>
<%     } else if ("error".equals(action)) {
          if (tarFileStatus == 4) { %>
               <p><img src="images/dialogue/error_16.gif" class="icon" alt="Notify" /> The backup file <%=backupTarFile%> contains errors. This backup can't be restored. Please restore a valid back up.
               </P>
          <%} else if (tarFileStatus == 3) { %>
               <p><img src="images/dialogue/error_16.gif" class="icon" alt="Notify" /> The backup file list <%=backupFileList %> is missing. This file is required to restoring backup. Please get the backup file list and proceed with restoring backup.</p>
          <%} else if (tarFileStatus == 2) { %>
               <p> <img src="images/dialogue/error_16.gif" class="icon" alt="Notify" /> The backup file <%=backupTarFile%> contains errors and the backup file list <%=backupFileList%> is missing. This backup can't be restored. </p>
          <%} %>
<%     }
} else { %>
<p><strong>Note</strong>: Both backup and restore will shut down MSP temporarily. MSP will be unable to collect data from devices, send notifications, or provide MSP Console access during this time. When the backup or restore operation is complete, MSP will come back online automatically.</p>
<h3>Backup</h3>
<form action="<%= restoreURL.toString() %>" method="post">
<p>Please provide a name for your backup. MSP will provide the date automatically in the list of backups.</p>
<p><label for="<uif:namespace />backupName">Name</label> <input type="text" name="<uif:namespace />backupName" id="<uif:namespace />backupName" size="20" maxlength="256" /> <input type="submit" name="<uif:namespace />submitButton" value="Back up now" onclick="return <uif:namespace/>validateName()"/></p>
</form>
<h3>Restore</h3>
<p>This will restore all databases (device assets, collected device data, software packages, policies, etc.) to their state as of the time the backup was made. Changes since then <em>except for backups</em> will be destroyed.</p>
<%
Vector restoreList = helper.getRestoreEntries();
Vector restoreDates = helper.getRestoreDates();
Vector restoreVersions = helper.getRestoreVersions();
Vector filesStatus = helper.getBackupFilesStatus();
%>
<% if (restoreList.size() == 0) { %>
<p>There are no backups currently available.</p>
<% } else { %>
<form action="<%= restoreURL.toString() %>" method="post">
<table class="input-radios" id="<uif:namespace />existingBackups">
<thead>
<tr>
<th></th>
<th>Name</th>
<th>Date</th>
<th>MSP Version</th>
<th>Remarks </th>
</tr>
</thead>
<tfoot>
<tr>
<td colspan="4" class="actionsOnSelected">
<input type="submit" name="<uif:namespace />submitButton" value="Restore" onclick="return confirm('This action requires MSP and all related services to be shut down. Console will be unavailable if the request is submitted. The server will restart automatically once restore has been completed.');" />
<input type="submit" name="<uif:namespace />submitButton" value="Remove" onclick="return confirm('This action will remove the backup archive. You will no longer be able to restore this backup. Continue?');" />
</td>
</tr>
</tfoot>
<tbody><%-- First one (most recent) is checked by default. Every other row has class="portlet-section-alternate". Note that each ID must be unique and must match the value of the "for" attribute on the corresponding "label" element. --%>
<%
for (int i = 0; i < restoreList.size(); i++) {
%>
<tr <%= (i % 2 == 1) ? " class=\"portlet-section-alternate\"" : "" %>>
<td><input type="radio" name="<uif:namespace />selectedBackup" value="<%= i %>" id="<uif:namespace />selectedBackup-<%= i %>" <%= (i == 0) ? "checked=\"checked\"" : "" %> /></td>
<td><label for="<uif:namespace />selectedBackup-<%= i %>"><%= restoreList.elementAt(i) %></label></td>
<td><%= dateFormat.format((Date)restoreDates.elementAt(i)) %></td>
<td><%= restoreVersions.elementAt(i) %></td>
<td><%= filesStatus.elementAt(i) %></td>
</tr>
<%
%>
</tbody>
</table>
</form>
<% } %>
<% } %>
<script type="text/javascript">
<![CDATA[//><!]]>
</script>
and my BackupManager.java is as follows where the code in bold and italic is called the restore()
//============================================================================
// Symbol Technologies P R O P R I E T A R Y S O U R C E C O D E
// C O N F I D E N T I A L
// Copyright (c) 2003 Symbol Technologies. All Rights Reserved.
// All information contained herein is the property of Symbol Technologies,
// or its Licensors, and are protected copyrights and trade secrets, and may
// be covered by U.S. patents. Any reproduction or dissemination of any
// portion of this document, of the software, or other works derived from it
// is strictly forbidden unless prior written permission is obtained from
// Symbol Technologies.
//============================================================================
package com.symbol.mss.sdf.services.backup;
import java.io.*;
import java.sql.Time;
import java.text.DateFormat;
import java.util.logging.FileHandler;
import java.util.logging.Formatter;
import java.util.logging.LogRecord;
import java.lang.Process;
import java.util.*;
import org.apache.avalon.framework.configuration.Configurable;
import org.apache.avalon.framework.configuration.Configuration;
import org.apache.avalon.framework.configuration.ConfigurationException;
import org.apache.avalon.framework.logger.LogEnabled;
import org.apache.avalon.framework.logger.Logger;
import com.symbol.mss.sdf.admin.AdministratorService;
import com.symbol.mss.sdf.backup.*;
import com.symbol.mss.sdf.data.*;
* @author nramaiah
* Service to perform scheduled backups of the system state.
public class BackupManager implements BackupService, DataHandler,
LogEnabled, Configurable {
// MSS Home Path
private static String mssHome = System.getProperty("phoenix.home", File.separator + "usr" +
File.separator + "local" +
File.separator + "mss" +
File.separator);
// Backup related definitions
private static final String BACKUP_LIST_FILE_NAME = "conf" + File.separator + "files_to_backup.txt";
private static final String BACKED_UP_LIST_FILE_NAME_SUFFIX = "_filesList.txt";
private static final String BACKUP_LOCATION = File.separator + "var" + File.separator + "lib" +
File.separator + "mss-backups" + File.separator;
private static final String BACKUP_PARTITION = File.separator + "var" + File.separator + "lib";
private static final String VERIFY_BACKUP = File.separator + "usr" + File.separator + "local" +
                                                       File.separator + "mss" + File.separator+"tools"+
                                                       File.separator+"backup"+File.separator+"verifyBackup.sh";
// DB backup/restore related definitions
private static final String DB_DUMP_LOCATION = File.separator + "var" + File.separator +
"lib" + File.separator +
"mysql-dumps" + File.separator;
private static final String DB_BACKUP_SCRIPT = "bin" + File.separator + "mysql_alldb_backup.sh";
private static final String DB_RESTORE_SCRIPT = "bin" + File.separator + "mysql_alldb_restore.sh";
// Private variables
private AdministratorService m_admin = null;
private Logger m_logger = null;
private String backupLocation = null;
private String backupListFileName = null;
private String backupPartition = null;
private int backupPartitionLimit = 90;
private String dbDumpLocation = null;
private String dbBackupScript = null;
private String dbRestoreScript = null;
private List servicesBackupList = null;
private String tarFileExtension =".tgz";
private String errFileExtension =".err";
private int exitValue=0;
* Default Constructor
public BackupManager() {
servicesBackupList = new ArrayList();
* Set the administrator service implementation. Link established by Broker service.
* @param admin reference to an implementation of AdministratorService
public void setAdministrator(AdministratorService admin) {
m_admin = admin;
* Set the job publisher service implementation. Link established by Broker service.
* @param jobPublisher reference to an implementation of JobPublisherService
public void setJobPublisher(DataChannel jobPublisher) {
jobPublisher.subscribe(this);
* Gets the backup manager object.
* @return backup manager object
public BackupService getBackupService() {
return this;
* Service lifecycle method.
* @param logger logger object to be used by the service
public void enableLogging(Logger logger) {
m_logger = logger;
* Service lifecycle method.
* @param configuration service configuration object
public void configure(Configuration configuration) throws ConfigurationException {
// Verify MSS Home path
if (!mssHome.endsWith(File.separator))
mssHome += File.separator;
// Get the location where the backup file needs to be placed
backupLocation = configuration.getChild("BackupLocation").getValue(BACKUP_LOCATION);
// Verify backup directory path
if (!backupLocation.startsWith(File.separator))
backupLocation = mssHome + backupLocation;
if (!backupLocation.endsWith(File.separator))
backupLocation += File.separator;
// Get the file listing the files/directories to be backed up
backupListFileName = configuration.getChild("FilesList").getValue(BACKUP_LIST_FILE_NAME);
// Verify backup list file name path
if (!backupListFileName.startsWith(File.separator))
backupListFileName = mssHome + backupListFileName;
// Get the partition where the backups are kept
backupPartition = configuration.getChild("BackupPartition").getValue(BACKUP_PARTITION);
// Verify backup partition path
if (!backupPartition.startsWith(File.separator))
backupPartition = File.separator + backupPartition;
if (backupPartition.endsWith(File.separator))
backupPartition = backupPartition.substring(0, (backupPartition.length()-1));
// Get the limit on the amount of free space on the backup partition
backupPartitionLimit = configuration.getChild("BackupPartitionLimit").getValueAsInteger(backupPartitionLimit);
// Get the location where the DB dump files will be placed
dbDumpLocation = configuration.getChild("DBDumpLocation").getValue(DB_DUMP_LOCATION);
// Verify DB dump directory path
if (!dbDumpLocation.startsWith(File.separator))
dbDumpLocation = mssHome + dbDumpLocation;
if (!dbDumpLocation.endsWith(File.separator))
dbDumpLocation += File.separator;
// Get the name of DB dump backup script
dbBackupScript = configuration.getChild("DBBackupScript").getValue(DB_BACKUP_SCRIPT);
// Verify backup script path
if (!dbBackupScript.startsWith(File.separator))
dbBackupScript = mssHome + dbBackupScript;
// Get the name of DB dump restore script
dbRestoreScript = configuration.getChild("DBRestoreScript").getValue(DB_RESTORE_SCRIPT);
// Verify restore script path
if (!dbRestoreScript.startsWith(File.separator))
dbRestoreScript = mssHome + dbRestoreScript;
* Individual services can supply a list of files/directories to be backed up.
* These are files apart from the files specified in conf/files_to_backup.txt and
* will be backed up as well.
* @param files list of files/directories
public void filesToBackup(List files) {
synchronized(this) {
if (files != null) {
if (files.size() > 0) {
// Add the list contents to the current backup list
for (int i=0; i<files.size(); i++) {
String tStr = (String)files.get(i);
// Check for absolute or relative path
if (tStr.startsWith(File.separator))
servicesBackupList.add(tStr);
else
servicesBackupList.add(mssHome + tStr);
else
m_logger.info("Empty list of filenames. Nothing added.");
else
m_logger.info("Null list of filenames. Nothing added.");
* Individual services can supply a list of files/directories to be backed up.
* Specified files will be added to the file defining the list of files to be backed up.
* @param files list of files/directories
private void persistFilesToBackup(List files) {
synchronized(this) {
if (files != null) {
if (files.size() > 0) {
// Add the list of files provided to the end of file
try {
File file = new File(backupListFileName);
if ((file == null) || (!file.exists()))
file.createNewFile();
// Seek to the end of the file
RandomAccessFile rFile = new RandomAccessFile(file, "rw");
if (rFile != null) {
rFile.seek(rFile.length());
// Write the list contents to the file
for (int i=0; i<files.size(); i++) {
String tStr = (String)files.get(i);
// Check for absolute or relative path
if (tStr.startsWith(File.separator))
rFile.writeBytes(tStr + "\n");
else
rFile.writeBytes(mssHome + tStr + "\n");
else
m_logger.error("Error opening file " + backupListFileName);
rFile.close();
catch (Exception ex) {
ex.printStackTrace();
m_logger.error("Error adding entries to file " + backupListFileName, ex);
else
m_logger.info("Empty list of filenames. Nothing added.");
else
m_logger.info("Null list of filenames. Nothing added.");
* Command to be run during the backup process. Individual services can
* provide shell commands that will be executed before backing up the files.
* @param command shell command to be executed
private void runCommand(String command) {
* Creates a shell script at the specified location that will backup the
* files listed in the List passed in.
* @param scriptFileName location where the script needs to be created
* @param backupFileName name for the tar file being created
* @param backupList list of files to be backed up
private void createBackupScript(String scriptFileName, String backupFileName, ArrayList backupList) throws Exception {
// Create a new StringBuffer to build the contents to be written to the script file
StringBuffer buffer = new StringBuffer();
// Add the initial comment in the start script
buffer.append("#!/bin/sh\n" + "set -x\n\n");
// Check if the partition has enough space
buffer.append("### Check if the partition has enough space\n" +
// "diskUsed=`df -k | grep \"" + backupPartition + "\" | awk '{print $5}' | cut -d\"%\" -f1`\n" +
               " diskUsed=`df -k \"" + backupPartition + "\" | awk '{print $5}' | cut -d\"%\" -f1 | grep -v Use`\n" +
"echo \"Partition " + backupPartition + " is $diskUsed% used.\"\n" +
"if [ \"$diskUsed\" -lt \"" + backupPartitionLimit + "\" ]\nthen\n" +
" echo \"Starting backup...\"\n\n");
// Shutdown semmd
buffer.append(" ### Shutdown semm\n" + " /etc/init.d/semm stop\n" +
" sleep 2\n\n");
// MSP Limited release and earlier builds stop mysql DB and backup the
// /var/lib/mysql directory as it is. Starting MSP 1.0 GA release, mysql
// dump script will be integrated which will create sql scripts to
// restore the database.
// Check if mysql dump creation script exists
File mysqlDumpScript = new File(dbBackupScript);
if (mysqlDumpScript.exists()) {
// MSP 1.0 GA and later releases
// Run the script that will generate sql scripts that would re-create the DB as it is
buffer.append(" ### Call mysql dump script\n" +
" " + dbBackupScript + "\n\n");
else {
// MSP Limited release
// Add command to shutdown mysql
buffer.append(" ### Shutdown mysql\n" + " /etc/init.d/mysql stop\n\n");
// Change to root directory and create the tgz file
buffer.append(" ### Create tgz file\n" + " cd /\n");
// Build up the tar file name from the current date and time
String fileName = null;
if ((backupFileName != null) && (backupFileName.length() > 0))
fileName = backupFileName;
else {
// File name not provided by user, build one using the timestamp
Calendar cal = Calendar.getInstance();
Date date = cal.getTime();
fileName = "MSS-"
+ DateFormat.getDateInstance().format(date).replaceAll(" ", "").replaceAll(",", "")+ "-"
+ (new Time(cal.getTimeInMillis())).toString().replaceAll(":", "").substring(0,4);
String tarFileName = fileName + ".tgz";
// Get the current MSP Version
String mspVersion = getMSPVersion();
// Gather all the files to be backed up. Add them to the tar command and
// also dump them into the file maintaining the list of files being backed up
String listStr = "";
for (int i=0; i<backupList.size(); i++)
listStr += (String)backupList.get(i) + "\n";
// Dump the current MSP version and the list of files being backed up into a manifest file
String listFileName = fileName + BACKED_UP_LIST_FILE_NAME_SUFFIX;
RandomAccessFile file = new RandomAccessFile(backupLocation + listFileName, "rw");
m_logger.info("List of files/directories being backed up:\n" + listStr);
file.writeBytes("### MSP Version: " + mspVersion + " ###\n");
file.writeBytes(listStr);
file.close();
// Add the tar command to the script
buffer.append(" echo \"Creating " + backupLocation + tarFileName + "...\"\n" +
" tar cvhfz " + backupLocation + tarFileName + " `grep -v \"MSP Version:\" " +
backupLocation + listFileName + "`\n\n");
// Check if free space on the backup partition has reduced below the limit
// If enough space left, backup is retained, "mss" is made the owner of the files,
// "backup" is made the group the files belong to,
// permissions changed to be "0660" and
// backup action declared a success
// Else, backup files are deleted and declared a failure
buffer.append(" ### Check if the partition has enough space left\n" +
//" diskLeft=`df -k | grep \"" + backupPartition + "\" | awk '{print $5}' | cut -d\"%\" -f1`\n" +
" diskLeft=`df -k \"" + backupPartition + "\" | awk '{print $5}' | cut -d\"%\" -f1 | grep -v Use`\n" +
" echo \"Partition " + backupPartition + " is $diskLeft% used.\"\n" +
" if [ \"$diskLeft\" -gt \"" + backupPartitionLimit + "\" ]\n" +
" then\n" +
" ### Failure\n" +
" echo \"Partition " + backupPartition + " does not have enough space.\"\n" +
" echo \"Backup " + backupLocation + tarFileName + " will be removed.\"\n" +
" rm -f " + backupLocation + fileName + "*\n" +
" echo \"Backup Failed.\"\n" +
" else\n" +
                    " tar tvzf " + backupLocation + tarFileName + " > /dev/null 2>&1\n" +
" if [ ! -s " + backupLocation + tarFileName + " -o $? -ne 0 ] \n" +
                    " then\n" +
                    " echo \"MSP Backup operation is not successful. The tar file " + backupLocation + tarFileName + " contains errors.\"\n" +
                    " echo \"Please take the backup again\"\n" +
                    "     touch "+backupLocation+fileName+".err\n" +
" else \n" +
" ### Success\n" +
" ### Change the owner, group and permissions for the backup files\n" +
" chown mss " + backupLocation + fileName + "*\n" +
" chgrp backup " + backupLocation + fileName + "*\n" +
" chmod 0660 " + backupLocation + fileName + "*\n" +
" echo \"Backup Completed.\"\n" +
" fi\n" +
" fi\n\n");
// MSP Limited release and earlier builds re-start mysql. Starting
// MSP 1.0 GA release, mysql is not stopped and so re-start is not
// needed. sql scripts created by the dump script get packed into
// the tar file and so are deleted.
// Check if mysql dump creation script exists
if (mysqlDumpScript.exists()) {
// MSP 1.0 GA and later releases
// Remove DB dump files
buffer.append(" ### Remove DB Dump Files\n" + " rm -f " + dbDumpLocation + "*\n\n");
else {
// MSP Limited release
// Start mysql
buffer.append(" ### Start mysql\n" + " /etc/init

How to call a CORBA Object in a 3rd Party ORB from a EJB

Hello
I found a few articles on the web how to call EJBs for example from C++.
However, I want to do the inverse. I want to resolve an Object (implemented in C++, using OmniORB) via COS-Naming and invoke it from a EJB. I can write a simple Java Client which does this without a problem. But as soon as I try to do the same in EJB I get the following:
[#|2004-11-09T10:48:16.848+0100|WARNING|sun-appserver-pe8.0.0_01|javax.enterprise.resource.corba._DEFAULT_.rpc.transport|_ThreadID=12;|"IOP00710209: (INTERNAL) Unable to create listener thread on the specific port"
org.omg.CORBA.INTERNAL: vmcid: SUN minor code: 209 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.createListenerFailed(ORBUtilSystemException.java:3142)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.createListenerFailed(ORBUtilSystemException.java:3160)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryAcceptorImpl.initialize(SocketFactoryAcceptorImpl.java:60)
at com.sun.corba.ee.impl.transport.CorbaTransportManagerImpl.getAcceptors(CorbaTransportManagerImpl.java:190)
at com.sun.corba.ee.impl.transport.CorbaTransportManagerImpl.addToIORTemplate(CorbaTransportManagerImpl.java:207)
at com.sun.corba.ee.spi.oa.ObjectAdapterBase.initializeTemplate(ObjectAdapterBase.java:104)
I think there is somehow a conflict because the SUN Appserver also uses CORBA. My Code looks like this:
String[] a = null;
Properties props = new Properties();
final String CORBA_HOST = "arcos";
final String ORB_INITIAL_PORT = "2809";
props.put("org.omg.CORBA.ORBInitialPort", ORB_INITIAL_PORT);
props.put("org.omg.CORBA.ORBInitialHost", CORBA_HOST);
org.omg.CORBA.ORB orb = org.omg.CORBA.ORB.init(a, props);
So I thought this might be because there is already a ORB initialised. So I replaced the last line with
org.omg.CORBA.ORB orb = org.omg.CORBA.ORB.init();
Which should give me an ORB instance. However I get the following exception:
[#|2004-11-09T11:51:59.206+0100|WARNING|sun-appserver-pe8.0.0_01|javax.enterprise.system.stream.err|_ThreadID=15;|
org.omg.CORBA.NO_IMPLEMENT: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.genericNoImpl(ORBUtilSystemException.java:7085)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.genericNoImpl(ORBUtilSystemException.java:7107)
at com.sun.corba.ee.impl.orb.ORBSingleton.resolve_initial_references(ORBSingleton.java:311)
at com.ascom.util.CorbaNaming.resolve(CorbaNaming.java:26)
at com.ascom.fxm.FileManager.<init>(FileManager.java:46)
at com.ascom.srv.file.web.FileImporterImpl.importFile(FileImporterImpl.java:146)
Any ideas? Thank you very much in advance.
Oliver Jaun

Perhaps you could take a look at the following document and see if it meets your needs:
http://java.sun.com/j2se/1.4.2/docs/guide/rmi-iiop/interop.html

How to call swf in swf at proper x,y co-ordinate

Similar Messages

Maybe you are looking for