How to call the RFC from XI system

Dear Friends,
My requirement is RFC to RFC scenario i.e SAP to XI to Third party system.
I have the BAPI_EUQI_CREATE rfc, this RFC is available in ECCsystem, that RFC I imported in XI system, so third party system how to call this RFC.
please give me the suggestion it is very helpful.
Regards,
Shalini Shah

Hi Shalini,
You have create a RFC in the 3rd party system and import that RFC in XI System using 3rd party adapter.Do the necessary mapping and configure the sender RFC Adapter and at receiver side configure 3rd paty Adapter.
The 3rd party adapters must be installed via Deploy Tool or JSPM. But u should have a sda file with the adpater content.
see here for more details on JSPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5006901f-925c-2910-5f98-9ae26cc07eca
For more info:
If you still want to do it,
1. Import the RFCs of sender and of receiver.
2. Do the necessary mapping.
3. Configure sender and receiver RFC adapters.
Before that check if you have RFC destination for the RFC adapter. If not You should establish it. To establish an RFC destination for the RFC adapter.
1. Call the transaction Display and Maintain RFC Destinations (SM59).
2. Select an existing RFC destination of type ABAP Connections (for example, ABAP_Old) by double-clicking it.
3. Choose Destination ® Copy and copy the RFC destination using a new name (for example, ABAP_New).
4. Save the new RFC destination (ABAP_New) and delete the old RFC destination (ABAP_Old).
5. Create a new RFC destination (for example, RFC_Adapter) of type T (TCP/IP connection) as the RFC destination for the RFC adapter.
6. Select the registration type Registered Server Program and in the Program ID field enter the corresponding program ID from the configuration of the sender RFC adapter.
7. In the Gateway host and Gateway service fields, enter the gateway host and gateway service from the configuration of the sender RFC adapter.
8. If the sender system is a Unicode system, define the RFC destination as Unicode.
9. Using the name of the old ABAP connection (ABAP_Old), create a new RFC destination of type L (logical destination with reference entry).
10. In the Reference Entry field enter the RFC destination (RFC_Adapter) for the RFC adapter.
For more details take a look at this link. http://help.sap.com/saphelp_nw70/helpdata/en/25/76cd3bae738826e10000000a11402f/content.htm
Dont forget to Reward points if this helps
Regards
Pragathi.
Edited by: Pragathi on May 24, 2008 7:21 AM

Similar Messages

How to call the RFC from R/3 to SRM, when we use webdynpro abap? (Urgent)

Hello
We use SRM Server 5.5 with classic scenario.
We want to call RFC in R/3 from webdynpro ABAP.
How can we do that?
We are developing the web report using webdynpro abap.
So we need some of R/3 data such like PR(EBAN)and PO(EKKO,EKPO).
When user choose the search parameter, report diplay the Shopping cart, PR and PO data on webdynpro. So we call the R/3 RFC to display the PR, PO data.
But I tired to call the RFC in R/3, We could not call it.
How to call the RFC from R/3 to SRM, when we use webdynpro abap?
Thank you,
Best Regards,
SH.

Hi
Please look at the following threads as well ->
WebDynpro in SRM
BAPI's /RFC's in SRM
BAPI to Change Shopping Cart by RFC
SRM60 and webdynpro
Webdynpro Services Exception
WebDynpro using BAPI has an error
SRM60 and webdynpro...
SAP uses META Function modules in SRM to get data from R/3 back-end.
For getting Purchase requistion data, use the function modules ->
META_REQUISITION_CHANGE Change purchase requisition
META_REQUISITION_CREATE Create Requisition
META_REQUISITION_DELETE Delete/close purchase requisition
META_REQUISITION_GETDETAIL Display requisition details
META_REQUISITION_GETITEMS Display requisition items
META_REQUISITION_GETRELINFO Get Releasease Info for requisitions
For getting Purchase order data, use the function modules ->
META_PO_CREATE Create purchase order
META_PO_DELETE Delete reservation
META_PO_GETDETAIL Display purchase order details
META_PO_GETITEMS Display purchase order items
META_PO_GETRELINFO Display purchase order release information
Hope this will definitely help. Do let me know.
Regards
- Atul

Calling the RFC from other system.

Hi Everybody.
I have two systems.One is ECC and other is SAP R/3.
I have created one RFC in SAP R/3 system and I am calling this
RFC fom ECC system.On click of one button,I have to show some
fields from the RFC onto the screen of WDA .
How can I achieve it ? Is there any code for that or some link
available for that.
Thanks In Advance.

hi vaibhav...
         using rfc you will be calling a function module in r/3. so it will return some exporting parameters, bind it to the attributes that are created in the context or
       create a destination in ecc6 to call the r/3 system .u se service call and mention that destination while creating it.
---regards,
   alex b justin

Issue when Calling the RFC from external system

Hi,
I have created one RFC, in which I am using one function module to get the material customer status.
Functional Module name is "QC01_BATCH_VALUES_READ".
When I run this in SAP, it is giving a value for Cusotmer Status. But when this RFC is called from .Net system it is not returning any value for this field.
Even I used a different function module 'CLAF_CLASSIFICATION_OF_OBJECTS' for the same, in this also in SAP it is doing good, but when it is called from .Net, the program is giving dump.
Please help me to resolve this issue
Thanks
Ravi

Hi Ravi,
Issue can be either in the .NET program or in the RFC destination creation.
1)
Check whether data types of .NET program which is calling the SAP function module are correct.
If there are issues with data types, program dont report if you dont so explicitly.
2) Check whether RFC destination you are giving in your .NET program is correctly configured in
SAP , verify by testing the same.
Apart from above two reasons, I dont see any other major reasons for not getting correct results.
Regards
Krishna

How to trigger sender rfc from r3 system

Hi experts,
can any body send documents about " how to trigger sender rfc from r3 system"
regards
sandeep.

HI Sandeep,
To send RFC data on timely basis you can schedule the programs.
In Partner Profile use setting collect program. Use program RSEOUT00 to send data at particular time.
You can schedule the report RSEOUT00 according to your requirements. So it flushes all the idocs in the background as per your schedule this program.
Plese refer the below thread, it will help you.
Re: Triggering Idocs from sender side
Idoc triggering from a transaction
Cheers..
Vasu
** Reward Points if found useful **

How to take the data from sage system to sap r/3

hi expects,
how to take the data from sage system to sap r/3? which adapter is to be used?what is the format of data in sage system?how the scenarios will work ? please help me in solving this problem?

hi rohit,
the data transfer can be done by using SOAP adapter
do chk this link
http://www.sage.org/lists/sage-members-archive/2001/msg01718.html
http://www.sage.org/lists/sage-members-archive/2001/msg01739.html
thanx
Sampath

How to Call the RFC in Webdynpro abap application

Dear Experts,
Good Evening to all...
I have to add two numbers using RFC in webdynpro abap application. If we give the numbers in the input screen then the RFC should add it and give it in the output screen. This is the application for that I have created the RFC.
But the problem is i don't know how to call the RFC in that Webdynpro abap application and how to link the input view and output view with that RFC...? I am new to Webdynpro abap. Please kindly help me on this... I am struggled here... I need your help in this....
Thank You.

Hi Jaga,
You asked the same question again.
Without closing the [previous one|Re: Where SAP store the uploaded files?].
I think Abhi has answered your question.
If not please elaborate on the problem.
The solution btw is to create a Service Call.
Sumit

How to call the RFC's from the third party applications or Non SAP applicat

Hi,
For calling RFC's from the wedynpro , SAP has provided the modeling concept.
In the same way, if i want to access or call the RFC 's from the third applications or Non SAP applications what is the procedure and what is the methodoligy.
As per my knowledge, we need to expose those RFC's as webservices . Then we must be able to acces in hetrogeous environment from any third party applications..
Please revert back soon, It is very urgent.
Regards
Vijay

Ayyappa Raj,
Thanks for the reply.
Please let me the detailed information for implementing.
AS you said . I need expose the RFC's as webservice. This point is clear to me.
2) Use tthe JCo to connect and create client proxy.
Can u please elabrate the above point?
If u have any steps created in the document or url to refer. Please forward it to me.
Please forwar the document to this id "vijay00" in yahoo.
AS the sdn is not allowing to give the maill id i have given only the id details in yahoo.
I am new to this procedure.
Regards
Vijay

Unable to call the RFC from the WD java Program

Hi All,
I have a table and three buttons Create, Edit, Save in the layout.
If no record available in the R3 the the end user will click on create and then he will click on save so that the insert RFC will be called accordingly and the record will be inserted.My table is limited to 5 records only. If i enter all the 5 records and Click on submit the record is inserting in the backend , but if i enter less than 5 records im unable to call the RFC what might be the issue.
My insert RFC takes one Table node and 4 import parameters i'm passing all of the all the mentioned import parameters.
Code:-
View Controller code
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.gmr.ess;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateAPPView).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import java.math.BigDecimal;
import java.util.Date;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.ArrayList;
import java.util.Calendar;
import java.util.Collection;
import java.util.Iterator;
import com.gmr.ess.wdp.IPrivateAPPView;
import com.gmr.pck.Zst_Hr_Nominee;
import com.sap.tc.webdynpro.progmodel.api.IWDMessageManager;
import com.sap.tc.webdynpro.services.sal.um.api.IWDClientUser;
import com.sap.tc.webdynpro.services.sal.um.api.WDClientUser;
//@@end
//@@begin documentation
//@@end
public class APPView
Logging location.
private static final com.sap.tc.logging.Location logger =
 com.sap.tc.logging.Location.getLocation(APPView.class);
static
 //@@begin id
 String id = "$Id$";
 //@@end
 com.sap.tc.logging.Location.getLocation("ID.com.sap.tc.webdynpro").infoT(id);
Private access to the generated Web Dynpro counterpart
for this controller class. 
Use <code>wdThis</code> to gain typed access to the context,
to trigger navigation via outbound plugs, to get and enable/disable
actions, fire declared events, and access used controllers and/or
component usages.
@see com.gmr.ess.wdp.IPrivateAPPView for more details
private final IPrivateAPPView wdThis;
Root node of this controller's context. 
Provides typed access not only to the elements of the root node
but also to all nodes in the context (methods nodeXYZ())
and their currently selected element (methods currentXYZElement()).
It also facilitates the creation of new elements for all nodes
(methods createXYZElement()). 
@see com.gmr.ess.wdp.IPrivateAPPView.IContextNode for more details.
private final IPrivateAPPView.IContextNode wdContext;
A shortcut for <code>wdThis.wdGetAPI()</code>. 
Represents the generic API of the generic Web Dynpro counterpart
for this controller. 
private final com.sap.tc.webdynpro.progmodel.api.IWDViewController wdControllerAPI;
A shortcut for <code>wdThis.wdGetAPI().getComponent()</code>. 
Represents the generic API of the Web Dynpro component this controller
belongs to. Can be used to access the message manager, the window manager,
to add/remove event handlers and so on. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdComponentAPI;
public APPView(IPrivateAPPView wdThis)
 this.wdThis = wdThis;
 this.wdContext = wdThis.wdGetContext();
 this.wdControllerAPI = wdThis.wdGetAPI();
 this.wdComponentAPI = wdThis.wdGetAPI().getComponent();
//@@begin javadoc:wdDoInit()
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit()
 //@@begin wdDoInit()
 try{
 IWDMessageManager manager1 = wdComponentAPI.getMessageManager();
 IWDClientUser user = WDClientUser.getLoggedInClientUser();
 String logUser= user.getSAPUser().getUniqueName();
 wdContext.currentContextElement().setUserid(logUser);
 wdThis.wdGetAPPController().executeBapi_Employee_Getdata_Input();//Returns the user id for the employee
 Collection nomineeList = new ArrayList();
 wdThis.wdGetAPPController(). executeZ_Hrfm_Nominee_Disp_Input( );
 int nomineeTableSize = wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().size();
 for(int i=0;i< nomineeTableSize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 ele.setAddr(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getAddr());
 ele.setDob(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getDob());
 ele.setGuard(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getGuard());
 ele.setName(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getName());
 ele.setPerc(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getPerc());
 ele.setRelat(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getRelat());
 nomineeList.add(ele);
 wdContext.nodeDisplay_table_node().bind(nomineeList);
 wdContext.currentContextElement().setEdit_val_attr(true);
 if(nomineeTableSize<=0){
 wdContext.currentContextElement().setCreateButtonEnable(true);
 wdContext.currentContextElement().setEditButtonEnable(false);
 else{
 wdContext.currentContextElement().setCreateButtonEnable(false);
 wdContext.currentContextElement().setEditButtonEnable(true);
 catch(Exception e){
 wdComponentAPI.getMessageManager().reportException("",true);
 //@@end
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
 //@@begin wdDoExit()
 //@@end
//@@begin javadoc:wdDoModifyView
Hook method called to modify a view just before rendering.
This method conceptually belongs to the view itself, not to the
controller (cf. MVC pattern).
It is made static to discourage a way of programming that
routinely stores references to UI elements in instance fields
for access by the view controller's event handlers, and so on.
The Web Dynpro programming model recommends that UI elements can
only be accessed by code executed within the call to this hook method.
@param wdThis Generated private interface of the view's controller, as
 provided by Web Dynpro. Provides access to the view controller's
 outgoing controller usages, etc.
@param wdContext Generated interface of the view's context, as provided
 by Web Dynpro. Provides access to the view's data.
@param view The view's generic API, as provided by Web Dynpro.
 Provides access to UI elements.
@param firstTime Indicates whether the hook is called for the first time
 during the lifetime of the view.
//@@end
public static void wdDoModifyView(IPrivateAPPView wdThis, IPrivateAPPView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
 //@@begin wdDoModifyView
 //@@end
//@@begin javadoc:onActionGetData(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionGetData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionGetData(ServerEvent)
 //$$begin ActionButton(-535519310)
 //wdThis.wdGetAPPController().executeZ_Hrfm_Nominee_Disp_Input();
 //$$end
 //@@end
//@@begin javadoc:onActionEdit(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionEdit(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionEdit(ServerEvent)
 //$$begin ActionButton(-535519310)
 displayTablesize=wdContext.nodeDisplay_table_node().size();
 if(displayTablesize<5){
 for(int i=0;i<size-displayTablesize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 wdContext. nodeDisplay_table_node().addElement(ele);
 operation="MOD";
 wdContext.currentContextElement().setTableReadOnly(true);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 //$$end
 //@@end
//@@begin javadoc:onActionCreate(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionCreate(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionCreate(ServerEvent)
 int month=0,year=0,day=0;
 String month1,day1,year1;
 try{
 displayTablesize=wdContext.nodeDisplay_table_node().size();
 wdContext.currentContextElement().setEdit_val_attr(false);
 if(wdContext.nodeDisplay_table_node().isEmpty()){
 if(displayTablesize<5){
 Calendar cal=Calendar.getInstance();
 month=cal.get(Calendar.MONTH)+1;
 if(month==1||month==2||month==3||month==4||month==5||month==6||month==7||month==8||month==9){
 month1="0"+month;
 else{
 month1=""+month;
 day = cal.get(Calendar.DAY_OF_MONTH);
 if(day==1||day==2||day==3||day==4||day==5||day==6||day==7||day==8||day==9){
 day1= "0"+day;
 else{
 day1=""+day;
 year = cal.get(Calendar.YEAR);
 year1=""+year;
 String strFormat=day1"."month1"."year1;
 wdContext.currentOutput_NomineeElement().setBegda(strFormat);
 wdContext.currentOutput_NomineeElement().setEndda("31.12.9999");
 for(int i=0;i<size-displayTablesize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 wdContext. nodeDisplay_table_node().addElement(ele);
 operation="INS";
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 wdContext.currentContextElement().setTableReadOnly(true);
 catch(NullPointerException npe){
 wdComponentAPI.getMessageManager().reportException("No Data Available",true);
 //@@end
//@@begin javadoc:onActionSaveData(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionSaveData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionSaveData(ServerEvent)
 float percentage=0;
 float dupePercentage=0;
 boolean isTest = false;
 Collection DispTList = new ArrayList();
 IWDMessageManager manager1 = wdComponentAPI.getMessageManager();
 try{
 displayTablesize = wdContext.nodeDisplay_table_node().size();
 //for(int i=1;i<=displayTablesize;i++){
 for(int i=0;i<displayTablesize;i++){
 BigDecimal share = wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc();
 String name = wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName();
 percentage = share.floatValue();
 dupePercentage = dupePercentage + percentage;
 if(name!=null && share!=null){
 Zst_Hr_Nominee nominee = new Zst_Hr_Nominee();
 nominee.setAddr(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getAddr());
 manager1.reportSuccess(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getAddr());
 nominee.setDob(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getDob());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getDob());
 nominee.setGuard(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getGuard());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getGuard());
 nominee.setName(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName());
 nominee.setPerc(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc());
 nominee.setRelat(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getRelat());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getRelat());
 DispTList.add(nominee);
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().nodeNominee_ins().bind(DispTList);
 if((dupePercentage)!=100)
 wdComponentAPI.getMessageManager().reportException(
 "The sum of the share Percentages is not 100. Modify the percentages accordingly",true);
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().nodeNominee_ins().bind(DispTList);
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 String beginDate = wdContext.currentOutput_NomineeElement().getBegda();
 manager.reportSuccess(wdContext.currentOutput_NomineeElement().getBegda());
 String endDate=wdContext.currentOutput_NomineeElement().getEndda();
 manager.reportSuccess(wdContext.currentOutput_NomineeElement().getEndda());
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setBegda(beginDate);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setEndda(endDate);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 wdComponentAPI.getMessageManager().reportSuccess(operation);
 wdThis.wdGetAPPController().executeBapi_Employee_Getdata_Input();
 wdThis.wdGetAPPController().executeZ_Hrfm_Nominee_Ins_Mod_Input();
 //wdContext.currentContextElement().setTableReadOnly(false);
 catch(Exception e){
 e.getMessage();
 //@@end
The following code section can be used for any Java code that is
not to be visible to other controllers/views or that contains constructs
currently not supported directly by Web Dynpro (such as inner classes or
member variables etc.). 
Note: The content of this section is in no way managed/controlled
by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
int nomineeTableSize = 0;
int displayTablesize = 0;
String operation= null;
int size=5;
// float dupePercentage=0;
//String mod_op="MOD";
//@@end
content of obsolete user coding area(s) -
//@@begin obsolete:javadoc:onActionSave(ServerEvent)
// /** Declared validating even
Component controller code
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.gmr.ess;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateAPP).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import java.util.Iterator;
import com.gmr.ess.wdp.IPrivateAPP;
import com.gmr.pck.Bapi_Employee_Getdata_Input;
import com.gmr.pck.Bapip0002B;
import com.gmr.pck.Z_Hrfm_Nominee_Disp_Input;
import com.gmr.pck.Z_Hrfm_Nominee_Ins_Mod_Input;
import com.gmr.pck.Zst_Hr_Nominee;
import com.sap.lcr.api.util.SetProfileConnect;
import com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException;
import com.sap.tc.webdynpro.progmodel.api.IWDMessageManager;
//@@end
//@@begin documentation
//@@end
public class APP
Logging location.
private static final com.sap.tc.logging.Location logger =
 com.sap.tc.logging.Location.getLocation(APP.class);
static
 //@@begin id
 String id = "$Id$";
 //@@end
 com.sap.tc.logging.Location.getLocation("ID.com.sap.tc.webdynpro").infoT(id);
Private access to the generated Web Dynpro counterpart
for this controller class. 
Use <code>wdThis</code> to gain typed access to the context,
to trigger navigation via outbound plugs, to get and enable/disable
actions, fire declared events, and access used controllers and/or
component usages.
@see com.gmr.ess.wdp.IPrivateAPP for more details
private final IPrivateAPP wdThis;
Root node of this controller's context. 
Provides typed access not only to the elements of the root node
but also to all nodes in the context (methods nodeXYZ())
and their currently selected element (methods currentXYZElement()).
It also facilitates the creation of new elements for all nodes
(methods createXYZElement()). 
@see com.gmr.ess.wdp.IPrivateAPP.IContextNode for more details.
private final IPrivateAPP.IContextNode wdContext;
A shortcut for <code>wdThis.wdGetAPI()</code>. 
Represents the generic API of the generic Web Dynpro counterpart
for this controller. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdControllerAPI;
A shortcut for <code>wdThis.wdGetAPI().getComponent()</code>. 
Represents the generic API of the Web Dynpro component this controller
belongs to. Can be used to access the message manager, the window manager,
to add/remove event handlers and so on. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdComponentAPI;
public APP(IPrivateAPP wdThis)
 this.wdThis = wdThis;
 this.wdContext = wdThis.wdGetContext();
 this.wdControllerAPI = wdThis.wdGetAPI();
 this.wdComponentAPI = wdThis.wdGetAPI().getComponent();
//@@begin javadoc:wdDoInit()
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit()
 //@@begin wdDoInit()
 //$$begin Service Controller(1490375209)
// wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().bind(new Z_Hrfm_Nominee_Ins_Mod_Input());
 Z_Hrfm_Nominee_Ins_Mod_Input input = new Z_Hrfm_Nominee_Ins_Mod_Input();
 input.addNominee(new Zst_Hr_Nominee());
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().bind(input);
 //$$end
 //$$begin Service Controller(-932523997)
 wdContext.nodeZ_Hrfm_Nominee_Disp_Input().bind(new Z_Hrfm_Nominee_Disp_Input());
 //$$end
 //$$begin Service Controller(-368783613)
 wdContext.nodeBapi_Employee_Getdata_Input().bind(new Bapi_Employee_Getdata_Input());
 //$$end
 //@@end
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
 //@@begin wdDoExit()
 //@@end
//@@begin javadoc:wdDoPostProcessing()
Hook called to handle data retrieval errors before rendering.
After doModifyView(), the Web Dynpro Framework gets all context data needed
for rendering by validating the contexts (which in turn calls the supply
functions and supplying relation roles). In this hook, the application
should handle the errors which occurred during validation of the contexts.
Using preorder depth-first traversal, this hook is called for all component
controllers starting with the current root component.
Permitted operations:
- Flushing model queue
- Creating messages
- Reading context and model data
Forbidden operations:
- Invalidating model data
- Manipulating the context
- Firing outbound plugs
- Creating components
@param isCurrentRoot true if this is the root of the current request
//@@end
public void wdDoPostProcessing(boolean isCurrentRoot)
 //@@begin wdDoPostProcessing()
 //@@end
//@@begin javadoc:wdDoBeforeNavigation()
Hook before the navigation phase starts.
This hook allows you to flush the model queue and handle any
errors that occur. Firing outbound plugs is allowed in this hook.
Using preorder depth-first traversal, this hook is called for all component
controllers starting with the current root component.
@param isCurrentRoot true if this is the root of the current request
//@@end
public void wdDoBeforeNavigation(boolean isCurrentRoot)
 //@@begin wdDoBeforeNavigation()
 //@@end
//@@begin javadoc:wdDoApplicationStateChange()
Hook that informs the application about a state change.

This hook is called e.g. to tell the application that will be
<ul>
<li>left via a suspend plug and therefore should go into a suspend/sleep
 mode with minimal need of resources. errors that occur. Firing
 outbound plugs is allowed in this hook.
<li>left due to a timeout and could write it's state to a data base if the
 user comes back later on
</ul>
The concrete reason is available via IWDApplicationStateChangeInfo

Important: This hook is called for the top level component only!
@param stateChangeInfo contains the information about the nature of the state change
@param stateChangeReturn allows the application to ask for a different state change.
 The framework is allowed to ignore it considering i.e. the current resources situation.
//@@end
public void wdDoApplicationStateChange(com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeInfo stateChangeInfo, com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeReturn stateChangeReturn)
 //@@begin wdDoApplicationStateChange()
 //@@end
//@@begin javadoc:executeBapi_Employee_Getdata_Input()
/** Declared method. */
//@@end
public void executeBapi_Employee_Getdata_Input( )
 //@@begin executeBapi_Employee_Getdata_Input()
 //$$begin Service Controller(1705750894)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 Iterator itrGetData = null;
 Bapip0002B out = null;
 try
 wdContext.currentBapi_Employee_Getdata_InputElement().modelObject().execute();
 wdContext.nodeOutput().invalidate();
 itrGetData = wdContext.currentOutputElement().modelObject().getPersonal_Data().iterator();
 while (itrGetData.hasNext()) {
 out = (Bapip0002B) itrGetData.next();
 empNo = out.getPerno();
 wdContext.currentZ_Hrfm_Nominee_Disp_InputElement().setPernr(empNo);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setPernr(empNo);
// manager.reportSuccess(empNo);
 //wdThis.executeZ_Hrfm_Nominee_Disp_Input();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
//@@begin javadoc:executeZ_Hrfm_Nominee_Disp_Input()
/** Declared method. */
//@@end
public void executeZ_Hrfm_Nominee_Disp_Input( )
 //@@begin executeZ_Hrfm_Nominee_Disp_Input()
 //$$begin Service Controller(-366407911)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 try
 wdContext.currentZ_Hrfm_Nominee_Disp_InputElement().modelObject().execute();
 wdContext.nodeOutput_Nominee().invalidate();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
//@@begin javadoc:executeZ_Hrfm_Nominee_Ins_Mod_Input()
/** Declared method. */
//@@end
public void executeZ_Hrfm_Nominee_Ins_Mod_Input( )
 //@@begin executeZ_Hrfm_Nominee_Ins_Mod_Input()
 //$$begin Service Controller(1524028406)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 try
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().modelObject().execute();
 wdContext.nodeOutput_nominee_ins_mod().invalidate();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
The following code section can be used for any Java code that is
not to be visible to other controllers/views or that contains constructs
currently not supported directly by Web Dynpro (such as inner classes or
member variables etc.). 
Note: The content of this section is in no way managed/controlled
by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
String empNo = null;
//@@end
Suman
Edited by: sumankumar kurimilla on Dec 23, 2008 9:26 AM

Hi,
I have checked from RFC side that is working fine only java app its not working can you tell any thing needs to be changed from my application end.
Please check in Savedata action.
Regards,
Suman
Edited by: sumankumar kurimilla on Dec 23, 2008 11:01 AM

How to call the RFC FM at the time of mapping

Hi Experts,
I am new to PI. I want to know How can we call the RFC function module at the time of message mapping.
Can any plz explain me?
Thanks
Karthik

First import the RFC FM by selecting import of RFC and IDOC supported button at SWC level and then provide the necessary R/3 details and get the RFC FM imported to IR .
Once this is done you can have a drop down list for the selecting the source or target message for mapping
Rajesh

How to upload the data from legacy system database to SAP data base

Hi.
We are doing analysis of Legacy system and which needs to be converted to SAP system i.e. SAP implementation.
I just want to know , how we migrate the existing whole data( from legacy system) into SAP system.
and which method is the best method to use data migration from legacy to SAP system if data legacy data amount is huge.
Please suggest me.
Thanks.

Hi
We can either use the BDC or BAPI or LSMW or Direct Input techiniques for the data transfers.
The combination of both Session and Call transaction can be used to achieve this that includes the error handling also. This invloves the screen interaction.
These days, BAPIs are used to overvome some upgrade problems. For easy upgradation, we cna go for BAPIs. Here ther is no screen intercation.
LSMW mainly used for master data transfers using some standrad programs.
As per your client or company desicions we can choose any of them.
Please refer to these links for more understanding -
BDC Vs LSMW -
BDC VS LSMW
BDC Vs BAPI -
BDC VS LSMW
Thanks & Regards,
Chandralekha.

CALL 2 RFCS FROM ONE SYSTEM...

One of my function module FUNCTION_Y on the system Y is calling a RFC FUNCTION_X to a system X. Once the call is over. it returns to the system Y data needed to generate a program, Function module FUNCTION_Y generates then the program within the one it calls an RFC to the same system X
The problem is that it prompt the user twice for a user and a password. And as between the two calls there is no user dialog. The user does not notice that he is prompt a second time for his user and pass...
If you have any suggestions? How can I may be do so the user is only asked once ? Maybe can I retain User and password and then call a function module to create the connection ?
Thank you

Hi Stephen,
I assumed you know that you can control in SM59 the login id and password of you RFC destination system. Your requirement is to prompt user login for the first RFC call but not the second.
If this is the case, you might want to create another RFC destination for the same system you are having. In the second RFC destination, populate the user id and password. Then in your program, the first RFC call, you use the first RFC destination which prompted you for id and password. For the second RFC call, use the second RFC destination.

How to call the data from BW to R/3

HI everybody,
I am having one /BIC/OHZSDS_QCAL in the BW which is created by the BW consultant, this /BIC/OHZSDS_QCAL consist of data in it now i have to call this R/3 and create a report to display. i am not getting any idea how to call this /BIC/OHZSDS_QCAL in the abap and write the code and display the output in R/3. and they are saying to create an RFC here for this, but how to create an RFC and call the data what code i have to write in the RFC function module so that i can get the data in the internal table of R/3 and write my report
Can anyone help out in this.....
Thanks in Advance
Edited by: mhyderali on Oct 7, 2011 8:07 AM

i have written the code in R/3 like this...
data : gt_wrex_data type standArd table of ZWREX_DATA,
 P_BWRID TYPE zRSCRMSTATUS-REPORTUID,
 LV_LANG TYPE SY-LANGU,
 gt_return TYPE STANDARD TABLE OF BAPIRET2,
 gt_rscrmvarp TYPE STANDARD TABLE OF zRSCRMVARP,
 gt_wrex_query TYPE STANDARD TABLE OF zWREX_QUERY.
CALL FUNCTION 'WREX_GET_DATA' DESTINATION 'BD4150'
EXPORTING
i_reportid = p_bwrid
i_logsys = 'BD4150'
i_no_check = 'X'
IMPORTING
e_bw_langu = lv_lang
TABLES
e_bw_data = gt_wrex_data
e_return = gt_return
i_bw_varsel = gt_rscrmvarp
i_bw_query = gt_wrex_query
EXCEPTIONS
not_found = 1
internal_error = 2
not_consistent = 3 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
so what's the next i have to do,
if i write the code in the BW like it is giving me an error "Function module "WREX_GET_DATA" not found."
CALL FUNCTION 'WREX_GET_DATA' DESTINATION 'RD4100'
EXPORTING
i_reportid = p_bwrid
i_logsys = 'RD4100'
i_no_check = 'X'
IMPORTING
e_bw_langu = lv_lang
TABLES
e_bw_data = gt_wrex_data
e_return = gt_return
i_bw_varsel = gt_rscrmvarp
i_bw_query = gt_wrex_query
EXCEPTIONS
not_found = 1
internal_error = 2
not_consistent = 3 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
so can you please guide me in this, to get the solution who to work and get the data in the R/3
I am waiting for your reply
Thanks in advance...

How to call the rfc in webdynpro abap..?

Dear Experts,
I need to add two numbers using RFC in webdynpro abap.
First we have to give the input then click the submit button.. The result will be shown in next screen with addition of two numbers... Please help me in this...
Thanks.

Calling an RFC Function module in Web Dynpro ABAP is nothing different from Classical ABAP
use Pattern button to call function module and use DESTINATION syntax to specify the RFC destination
http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Web_Dynpro_Part_II.pdf?PHPSESSID=c528a60bf8857431c0fa6f6595639da7
In Above document, page no 7, there is a wizard for Service call, in that 4th step is select service where
you can specify the function module name and the rfc destination name
Abhi

How to list the umages from server system

Hi,
I am using tomcat. while clicking on a link in my application it will invoke the swing file. in that file i have to list out the images from my server.
While accessing our application it retrives from the local system images not from server...
What is the code for retrieving images from system?

Just try this out
i dont' know if u asked for this
import the necessary classes
client:
public class Client
public static void main(String args[]) throws Exception
Socket s = new Socket("197.0.0.1", 1000);
PrintStream ps = new PrintStream(s.getOutputStream());
ps.println("hello.txt");
ObjectInputStream ois = new ObjectInputStream(s.getInputStream());
byte[] buffer = new byte[ois.available()];
buffer = (byte[])ois.readObject();
FileOutputStream fos = new FileOutputStream("hello.txt");
fos.write(buffer);
Server
public class Server
public static void main(String args[])
ServerSocket ss = new ServerSockt(1000);
Socket s = ss.accept();
BufferedReader br = new BufferedReader(new InputStreamReader(s.getInputStreamReader()));
String fname = br.readLine();
FileInputStream fis = new FileInputStream(fname);
byte[] buffer = new byte[fis.available()];
fis.read(buffer);
ObjectOutputStream oos = new ObjectOutputStream(s.getOuputStream());
oos.writeObject(buffer);
}

How to call the RFC from XI system

Similar Messages

Maybe you are looking for