How to call webservice for each record in a table using ODI

Hi
I am new to ODI and Webservice. I want to invoke a scenario in ODI using web service. I hava a weblogic application server with axis 2 deployed.
But I want call webservice for each record in a table
For eg: "EMP" table have 50 records, for each record web service should invoke
Can any one help me on it.
Thanks,
phani
Edited by: user12774166 on Jun 6, 2010 11:16 PM

If your goal is "call" a web service, Jason's Straub's [flex-ws-api|https://flex-ws-api.samplecode.oracle.com/] is by far the best I've seen. You might want read more about it on [his blog|http://jastraub.blogspot.com/search?q=+flex_ws_api+].
Tyler Muth
http://tylermuth.wordpress.com
[Applied Oracle Security: Developing Secure Database and Middleware Environments|http://sn.im/aos.book]

Similar Messages

Calling Procedure for each record ?

Hi,
I am using a procedure in a mapping.
I defined the procedure which is having 4 out parameters.
I am assigning these default values to the tables in a mapping.
When I see the generated code in a mapping, I observed that, the procedure is being called for each record.
But actually, its enogh to be called only once.
Could any one please help me, how can I restrict the procedure calling for each record.
Any help would be greatly appreciated.
Thank you,
Regards,
Gowtham Sen

Hi,
U can use MAP-INPUTS operator to give the inputs to the procedure and use a PRE_MAPPING operator to call the procedure. this way even if u feel u want to make the mapping running thru an scheduler u can still use it without changing the code.
Regards
Bharath

Can I plot 2 locations at the same time for each record in a table

I'm trying to plot 2 Locations (2 points on a Power View Map) at the same time for each record/project in a table
I can plot 1 location for each project of course with no problem
but I'm trying to show the Begin Point and the
End Point for each project at the same time
Is this even possible?

First of all THANKS this worked!
But now I stumbled on another issue. So I actually have 3 tables (and I've adopted them to the file you sent)
Table 1 => TripData
Trip
LongLat
Location
Type
TypeCode
Size
NW Tour
47.568077, -122.320800
Seattle, WA
Begin
0
1
NW Tour
47.035608, -122.884812
Olympia, WA
End
1
1
Cali Trip
37.808848, -122.412580
San Francisco, CA
Begin
0
1
Cali Trip
32.682611, -117.178348
San Diego, CA
End
1
1
Table 2 =>
TripInfo
Trip
OneLongLat
NTP
NW Tour
47.568077, -122.320800
1/1/2015
Cali Trip
37.808848, -122.412580
1/5/2015
Table 3 =>
ALLTrips
Trip
Stop
Owner
NW Tour
1
Owner1
NW Tour
2
Owner2
NW Tour
3
Owner3
NW Tour
4
Owner4
NW Tour
5
Owner5
Cali Trip
1
Owner6
Cali Trip
2
Owner7
Cali Trip
3
Owner8
Cali Trip
4
Owner9
Cali Trip
5
Owner10
Cali Trip
6
Owner11
This is how the Diagram View looks like in PowerPivot
Trip Data => Trip Info <= ALLTrips
Since I don't know how to post pictures
The MAP FIELDS are as follows
SIZE - Count of Stop(s)
LOCATIONS - OneLongLat followed by
LongLat (drill down feature)
COLOR - Trip
The problem now happens with the drill down feature
You can either plot OneLongLat which is the general location for each trip
Or LongLat of each trip which shows the begin and end points
But you can't use the drill down feature???
If instead of OneLongLat you use a
State Column it actually works!!!
I wonder if it has to do with the fact that both locations used for the drill down are Long/Lat numbers???
Any suggestions???
And again Thanks for the response!

Checking for every record in a table using PL/SQL

Hello Gurus,
I would need your help in finding the best approach to tackle the below analysis using PL/SQL.
I have a table which contains two columns
UserID and Month
I want to find out the users who made orders every month for the first half of 2012.That is the User ordered on Jan 2012, Feb2012 ... and June 2012.
The Table is huge and has more than a million records. How do I approach this in PL/SQL.
Joe

Hi Justin,
Thanks for the quick response. This is helpful.However my Intention is to do it using PL/SQL for learning purposes. I am new to PLSQL.
I wanted to do something like looping through each records in the table for every user ID and If I find orders for six consecutive months for a particular user, I will insert the user id to a temp table.
Any hints on how can I use this? I heard about cursor. Can I use it. If so how should I approach.
--Joe

Recording a last updated time for each record in a table

hi
i have a table with 5 columns. and the table has 100 rows of data.
i need to add a sixth column and this column should contain the last updated time of that particular row.
i am allowed to use triggers.
for example, if the 55th row undergoes a change, the 6th column's value for the 55th row should update itself with that particular time.
can any one of you come up with an optimized solution for this please ???
thanx a million in advance and best regards,
novice DBA
:)

Hi,
Here's an example:
CREATE OR REPLACE TRIGGER table_x_biu
BEFORE INSERT OR UPDATE ON table_x
FOR EACH ROW
BEGIN
:NEW.modified_dt := SYSDATE;
END table_x_biu
SHOW ERRORSwhere table_x is your table name, and modified_dt is the DATE column to be populated.
You won't have to specify modified_dt in any INSERT or UPDATE statements. In fact, if you do, the value you give will be ignored, and the trigger will always substitute SYSDATE.
WARNING: if you do get an error message, the line number reported will usually be relative to the first DECLARE or BEGIN statement in the trigger. For example, if I had mis-spelled SYSDATE in the example above, the error message would say there was a problem in line 2, not line 5.

How can i display collection of records in HTML Table using DWR framework

Dear All,
Just i start using the Direct Web Remoting framework.I am worrying to get the list of records to display html table using this concept.I did the same like.
index.js
var cellFuncs = [
function(data) { return data; },
function(data) { return data.toUpperCase(); },
function(data) { return "<input type='button' value='Test' onclick='alert(\"Hi\");'/>"; },
function(data) { return count++; }
function update() {
var name = dwr.util.getValue("demoName");
Demo.sayHello(name, function(data) {    dwr.util.setValue("demoReply", data);   } );
var count = 1;
dwr.util.addRows( "tabs",[ 'Africa', 'America', 'Asia', 'Australasia', 'Europe' ], cellFuncs);
alert("hai");
index.jsp
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<script type='text/javascript' src='dwr/engine.js'> </script>
<script type='text/javascript' src='dwr/util.js'> </script>
<script type='text/javascript' src='dwr/interface/Demo.js'> </script>
<script type="text/javascript" src='index.js'> </script>
</head>
<body>
<div id="tabContents">
<div id="demoDiv">
<p>
Name:
<input type="text" id="demoName" value="Joe"/>
<input value="Send" type="button" onclick="update()"/>
Reply: <span id="demoReply" style="background:#eeffdd; padding-left:4px; padding-right:4px;"></span>
     <table id="tabl1">
     <tbody id="tabs">
     <tr>
     <td>name</td>
     <td>name1</td>
     <td>name2</td>
     <td>name3sdf</td>
     </tr>
     <tbody>
     </table>
</p>
</div>
</div>
</body>
</html>
dwr.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE dwr PUBLIC "-//GetAhead Limited//DTD Direct Web Remoting 2.0//EN" "http://getahead.org/dwr/dwr20.dtd">
<dwr>
<allow>

<create creator="new" javascript="Demo">
<param name="class" value="org.getahead.dwrdemo.simpletext.Demo"/>
</create>
</allow>
</dwr>
web.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app id="dwr">
<display-name>DWR (Direct Web Remoting)</display-name>
<description>A Simple Demo DWR</description>
<servlet>
<servlet-name>dwr-invoker</servlet-name>
<display-name>DWR Servlet</display-name>
<description>Direct Web Remoter Servlet</description>
<servlet-class>org.directwebremoting.servlet.DwrServlet</servlet-class>
<init-param>
<param-name>debug</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>activeReverseAjaxEnabled</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>initApplicationScopeCreatorsAtStartup</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>maxWaitAfterWrite</param-name>
<param-value>500</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>dwr-invoker</servlet-name>
<url-pattern>/dwr/*</url-pattern>
</servlet-mapping>
</web-app>
Demo.java
package org.getahead.dwrdemo.simpletext;
import java.io.IOException;
import javax.servlet.ServletException;
import org.directwebremoting.WebContext;
import org.directwebremoting.WebContextFactory;
public class Demo
public String sayHello(String name)
return "Hello, " + name;
the sayHello() is printing the display.But the table rows not updating.But its object expected.So can you tell me where i need to change and how to add the pagination for the table like 10 by 10 records to display.
Please help me.
Saravanan

Hi Brian,
OAF supports the master-detail based design. You can very well implement your model. You can use 2 VO for your 2 objects and link them using a ViewLink. Check OAF Dev guide for more details.
--Shiv

How to export the alias (not the default alias table) using ODI?

I met a problem.I set two alias tables in the outline of my essbase database.One of course is the default alias table.And the other i set the name conAlias.
I want to export the members and the alias of conAlias(not the default). I tried this using ODI (LKM Hyperion Essbase MetaData to SQL) ,but only the default alias can be exported.so i want know what can i do.

Hi Dileep,
In your query you are not specified whether the SUM of entire internal table SALARY or break up SALARY.
If you want just the SUM of the entire internal table SALARY.
Try this code.
begin of itab occurs 0,
name(10),
salary type i,
end of itab.
itab-name = 'ABC'. itab-salary = 25000.
append itab.
itab-name = 'CDF'. itab-salary = 50000.
append itab.
itab-name = 'FGH'. itab-salary = 30000.
append itab.
itab-name = 'LMN'. itab-salary = 35000.
append itab.
itab-name = 'QPR'. itab-salary = 40000.
append itab.
loop at itab.
at last.                " Note the control statement used here
    sum.
    write: 'The total salary is',itab-salary.
endat.
endloop.
Regards,
Smart

SSRS 2008 R2 - Separate report for Each record?

Hi,
How do I create new pdf reports for each records from a table? The pdf files should be named as customerid.pdf and needs to be delivered in email or share path?
Each record has enough content for 5 page of pdf report.
How do we achieve this?
Thanks
Raj

You can create a data driven subscription to loop through records in the table and create pdf based on number of customerid.
Have a look at this for DD subscriptions :
http://msdn.microsoft.com/en-us/library/ms169673.aspx
Kind Regards, Vikram Kansal Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker

How to fire a query for every record in a table, pass values in a loop

Hi,
For each record in a table, I want to loop through each record and then fire a query by passing acct, product and date from this table to the where clause of the query. I would have to create a pl/sql block..The output of the query I want to spool from sql developer.
I need the exact syntax please for doing this.. since i am new to Oracle. Just the template will be enough. I will fill in the query.
Any help is appreciated as always..
Regards,
hena

904385 wrote:
Hi,
For each record in a table, I want to loop through each record and then fire a query by passing acct, product and date from this table to the where clause of the query. I would have to create a pl/sql block..The output of the query I want to spool from sql developer.
I need the exact syntax please for doing this.. since i am new to Oracle. Just the template will be enough. I will fill in the query.
Any help is appreciated as always..
Regards,
henaHave you ever considered using a JOIN ? It does the same thing as looping through a table and applying that to the where clause of a select on a query, only much, much, much faster and without the need to write any code. SQL is a declarative language, so you specify what you want and not how to do it. It can be bit of a journey to change your thought process if you come from a procedural or object world, but once you get there it's a beautiful view.

How to have a unique value for each record??

could any 1 help me out in this...
I want to have a column name 'Order No' which should be unique.
How to generate a unique value for each record.??

could any 1 help me out in this...
I want to have a column name 'Order No' which should be unique.
How to generate a unique value for each record.?? If you are using SQL PLUS to create the table try something like
this:
CREATE TABLE ORDER_TEST (
ORD_NO NUMBER (8) NOT NULL PRIMARY KEY,
ORDERDATE DATE,
CUSTID NUMBER (8) NOT NULL,
SHIPDATE DATE,
TOTAL NUMBER (8,2) CONSTRAINT TOTAL_ZERO CHECK
(TOTAL >= 0),
CONSTRAINT ORD_FOREIGN_KEY FOREIGN KEY (CUSTID) REFERENCES
CUSTOMER (CUSTID),
CONSTRAINT ORD_UNIQUE UNIQUE (ORD_NO)
-- or a simpler table example
DROP TABLE ORDER_TEST;
CREATE TABLE ORDER_TEST (
ORD_NO NUMBER (8),
ORDERDATE DATE,
CUSTID NUMBER (8) NOT NULL,
SHIPDATE DATE,
TOTAL NUMBER (8,2) CONSTRAINT TOTAL_ZERO CHECK
(TOTAL >= 0),
CONSTRAINT ORD_UNIQUE UNIQUE (ORD_NO)
note: ORD_NO can also be a primary key
If you are doing the INSERT during runtime from a form first
create a sequence in SQL PLUS to handle the ORD_NO value:
Create SEQUENCE ORDERNO_UNIQUEVAL_sqnc
START WITH 000001
NOMAXVALUE
NOCACHE;
and reference it as the ORD_NO parameter in your INSERT
statement:
ORDERNO_UNIQUEVAL_sqnc.NEXTVAL
note: to maintain data integrity you must use the sequence
everytime you insert a new order to table. To start a new
sequence drop the sequence and re-create it with whatever "START
WITH" value you want.
Hope this helps
Kevin

How to append parameter with URL for each record in table control?

Hi,
I have one table control which contains 5 columns.
(tripno, startdate, destination, reason, activities)
In 5th column, i need to display URL for each record.
for ex:
www.abc.com/test?tripno=1
www.abc.com/test?tripno=2
www.abc.com/test?tripno=3
when user clicks a particular hyperlink, it navigates to another page/component thru URL with one key field(tripno) to retrieve related records in next page.
1) i am not able to assign tripno to each record. when i assign tripno, its taking the last value which i assigned. ie. tripno=3 only.
How to assign URL to Reference field of LINK_TO_URL element at run time?
OR
2) we can do like this.
Simply assign url to reach record without key field.
www.abc.com/test
www.abc.com/test
www.abc.com/test
when user clicks a particular link, we can assign corresponding key field to the URL.
Where should i write this event? Bcoz, LINK_TO_URL doesnot have event.
how to do?

Hi MOg.
Not sure whether I understand you .. but in the 5th column you want to have the reference URL. Is this the activities columen from you example?
Nevertheless, you need a attribute (String) in your context node which contains the URL. Bind this to the reference filed of linktourl. If you can not extend the structure you can create a sub node (cardinality 1:1) which contains the refernce attribute.
Then loop over all elements and concatenate www.abc.com/test?tripno= with the tripno of the current element into the reference field.
Hope tis helps,
Sascha.
Bind the

How do I store images uploaded by end users for each record?

I am writing an application which requires end users to upload an image for each record they add. There could be thousands of images, and they are exclusive to this app. I use a File Browse item in order to let the user choose an image file to upload.
But all I have managed to achieve at the moment is storing the full pathname of where the image is on the users machine, which means they can see the images they upload but no-one else can! Obviously not practical. I haven't figured out how to actually upload the images to the server and achieve multi-user access from there.
My questions are, where is the best place to store these images, in the database or in a folder on the server? And what setups do I, or the DBA, need to do for both of these scenarios in order to save the uploaded images and display them.
Hopefully someone can give advice, or point me to some documentation explaining this procedure. Thanks in anticipation.
Rick.

Hi
The file you upload can be found in APEX_APPLICATION_FILES view. If you are want to store the file as BLOB in your table you can use the code similar to:
             SELECT BLOB_CONTENT, FILENAME, MIME_TYPE
             INTO    v_blob, v_actual_name, V_MIME_TYPE
             FROM   APEX_APPLICATION_FILES
             WHERE name = :P216_FILE;Or directly insert in your table using
             INSERT INTO ......... (.....)
             (SELECT BLOB_CONTENT, FILENAME, MIME_TYPE
             FROM   APEX_APPLICATION_FILES
             WHERE name = :P216_FILE);-----
Zulqarnain
http://www.maxapex.com
Low Cost, High Quality Hosting for Oracle Apex

How to genarate Primary Key for each record in XI Mapping

Hi,
I need to genarate primary key for each record in the paylod in mapping..
Eg: if i have a 10 reacords i need to have a primary key for each record..starting with the
Record      Primary key
First            001
Secound      002
Tenth         010
If i need to write any user defined funtion... can any one provide the code for it.
Thanks
Amaresh

Hi Bavesh,
I will explain with the example:
XML:
<Record 1>
<Primary key>
<value1>
<value2>
</Record 1>
<Record 2>
<Primary Key>
</Record 2>
like above i will be getting n number of recored and in each record i need to genarate primary key in XI.and the key sould be in sequence...
like for the first record 1 secound 2 like that primary key should add to the privous Primary key.
and this is for each payload.
Thanks
Amaresh

Table cntrol field to be display/Change only For each record

Hi all,
How to set a particular Field in table control either as display only or
change only for <b>each row</b> based on certain condition.I need to set this property for each record in table control not for the entire coloumn?.I know the procedure for setting up an entire coloumn in table control either as diplay or change only using <b>Loop at screen</b> statement.
Conditions:
If Material is batch managed:
itab-batch field has to be <b>Display only</b> mode.
if material is not batch managed:
itab-batch field has to be <b>change mode</b>.
<b>O/p of Table Control :</b>
Material     Batch
1000         Display only
2000        Change only
8000        Change only
3500        Display only
3600        Display only

Hi Ravi,
          Thanks for your reply.I have put the code as u said. It is modifying the whole coloumn insted of modifying Current row of the coloumn.
I have tried to modify the screen property using Table control attributes (TC-COLS).The following commented code is that logic.Even that also doing the same thing.Can yoy please tell me how to do it.
MODULE tc_get_lines OUTPUT.
LOOP AT SCREEN.
    IF screen-name = 'X_ZPINV-CHARG'.
      IF fg_batch = ' '.
        screen-input = 0.
      ELSE.
        screen-input = 1.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
LOOP AT tc-cols INTO tc_wa
WHERE screen-name = 'X_ZPINV-CHARG'.
   IF x_zpinv-matnr IS NOT INITIAL.
     CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
       EXPORTING
         input = x_zpinv-matnr
       IMPORTING
         output = v_matnr.
     SELECT SINGLE * FROM marc WHERE matnr = v_matnr
     AND werks = w_plant.
     IF marc-xchar IS INITIAL.
       tc_wa-screen-input = 0.
     ELSE.
       tc_wa-screen-input = 1.
     ENDIF.
     MODIFY tc-cols FROM tc_wa INDEX sy-tabix."    transporting screen-input
   ENDIF.
ENDLOOP.
ENDMODULE.                    "TC_GET_LINES OUTPUT

Lookup Data For Each Record of Result Set

I'm trying to determine if the following task is possible in BPEL and how to implement it.
Assume I have two DB Adapters returning data from two different databases.
The first excepts no inputs returns 5 records in a collection looking somewhat like the following.
Order ID, Item ID
1, 2
2, 1
3, 1
4, 2
5, 3
The second accepts an Item ID as input and returns the description for that item.
I would like the output of the BPEL Process to look like this.
Order ID, Item ID, Item Desc
1, 2, Computer
2, 1, Desk
3, 1, Desk
4, 2, Computer
5, 3, Lamp
I'm new to BPEL and I'm assuming this will involve invoking the first db adapter link and then iterator through the result set calling the second db adapter link for each record but I'm not sure where to start. I'm hoping someone can give me a simple example that I can play with. I've looked at How to iterate through multiple records read from a file adapter? and How to pass a single element in an array to XSL from BPEL but I'm getting lost.
Thanks

I just got it working in the BPEL for-each loop by creating a variable of type Order which I then assigned the results from that loop and then appended them to my output variable. I'd be interested in seeing how I could do that within a transformation if its quicker. How do I append in a transformation so that I can add the row after each loop.
Here is the BPEL so far.
I will note that I think just fetching a complete copy of both data sources and merging wouldn't be ideal as my items table could contain a million records or more and I'm only wanting to fetch the ones I'm interested in.
Thanks
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="Lookup_Orders"
               targetNamespace="http://xmlns.oracle.com/Order_Lookup/Sales_System/Lookup_Orders"
               xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
               xmlns:client="http://xmlns.oracle.com/Order_Lookup/Sales_System/Lookup_Orders"
               xmlns:ora="http://schemas.oracle.com/xpath/extension"
               xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
         xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
         xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/Order_Lookup/Sales_System/get_orders"
         xmlns:ns2="http://www.example.org"
         xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/get_orders"
         xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
         xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
         xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
         xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
         xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
         xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
         xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
         xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
         xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
         xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
         xmlns:ns4="http://xmlns.oracle.com/pcbpel/adapter/db/Order_Lookup/Sales_System/get_items"
         xmlns:ns5="http://xmlns.oracle.com/pcbpel/adapter/db/top/get_items"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <import namespace="http://xmlns.oracle.com/Order_Lookup/Sales_System/Lookup_Orders" location="Lookup_Orders.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
    
<partnerLinks>
    
    <partnerLink name="lookup_orders_client" partnerLinkType="client:Lookup_Orders" myRole="Lookup_OrdersProvider"/>
    <partnerLink name="get_orders" partnerLinkType="ns1:get_orders_plt"
                 partnerRole="get_orders_role"/>
    <partnerLink name="get_items" partnerLinkType="ns4:get_items_plt"
                 partnerRole="get_items_role"/>
</partnerLinks>

<variables>
    
    <variable name="inputVariable" messageType="client:Lookup_OrdersRequestMessage"/>
    
    <variable name="outputVariable" messageType="client:Lookup_OrdersResponseMessage"/>
    <variable name="Invoke1_get_ordersSelect_InputVariable"
              messageType="ns1:get_ordersSelect_inputParameters"/>
    <variable name="Invoke1_get_ordersSelect_OutputVariable"
              messageType="ns1:OrdersCollection_msg"/>
    <variable name="Invoke2_get_itemsSelect_InputVariable"
              messageType="ns4:get_itemsSelect_inputParameters"/>
    <variable name="Invoke2_get_itemsSelect_OutputVariable"
              messageType="ns4:ItemsCollection_msg"/>
    <variable name="Output_Row" element="ns2:OrderCollection"/>
</variables>

<sequence name="main">
    
    <receive name="receiveInput" partnerLink="lookup_orders_client" portType="client:Lookup_Orders" operation="process" variable="inputVariable" createInstance="yes"/>
    
    <invoke name="Invoke1" bpelx:invokeAsDetail="no" partnerLink="get_orders"
            portType="ns1:get_orders_ptt" operation="get_ordersSelect"
            inputVariable="Invoke1_get_ordersSelect_InputVariable"
            outputVariable="Invoke1_get_ordersSelect_OutputVariable"/>
    <forEach parallel="no" counterName="ForEach1Counter" name="ForEach1">
      <startCounterValue>1</startCounterValue>
      <finalCounterValue>count($Invoke1_get_ordersSelect_OutputVariable.OrdersCollection/ns3:Orders)</finalCounterValue>
      <scope name="Scope1">
        <sequence name="Sequence1">
          <assign name="Assign2">
            <copy>
              <from>$Invoke1_get_ordersSelect_OutputVariable.OrdersCollection/ns3:Orders[$ForEach1Counter]/ns3:itemId</from>
              <to>$Invoke2_get_itemsSelect_InputVariable.get_itemsSelect_inputParameters/ns5:item_id</to>
            </copy>
          </assign>
          <invoke name="Invoke2" bpelx:invokeAsDetail="no"
                  partnerLink="get_items" portType="ns4:get_items_ptt"
                  operation="get_itemsSelect"
                  inputVariable="Invoke2_get_itemsSelect_InputVariable"
                  outputVariable="Invoke2_get_itemsSelect_OutputVariable"/>
          <assign name="Assign3">
            <copy>
              <from>$Invoke1_get_ordersSelect_OutputVariable.OrdersCollection/ns3:Orders[$ForEach1Counter]/ns3:orderId</from>
              <to>$Output_Row/ns2:Order/ns2:Order_ID</to>
            </copy>
            <copy>
              <from>$Invoke1_get_ordersSelect_OutputVariable.OrdersCollection/ns3:Orders[$ForEach1Counter]/ns3:itemId</from>
              <to>$Output_Row/ns2:Order/ns2:Item_ID</to>
            </copy>
            <copy>
              <from>$Invoke2_get_itemsSelect_OutputVariable.ItemsCollection/ns5:Items[1]/ns5:itemDesc</from>
              <to>$Output_Row/ns2:Order/ns2:Item_Desc</to>
            </copy>
          </assign>
          <assign name="Assign4">
            <extensionAssignOperation>
              <bpelx:append>
                <bpelx:from>$Output_Row/ns2:Order</bpelx:from>
                <bpelx:to>$outputVariable.payload</bpelx:to>
              </bpelx:append>
            </extensionAssignOperation>
          </assign>
        </sequence>
      </scope>
    </forEach>
    <reply name="replyOutput" partnerLink="lookup_orders_client" portType="client:Lookup_Orders" operation="process" variable="outputVariable"/>
</sequence>
</process>

How to call webservice for each record in a table using ODI

Similar Messages

Maybe you are looking for