How to Call Webservices in ABAP(Syntax) created in abap ,java etc

All Champs,
Can some one explain me(programatically) that how to access webservices in following cases.
case 1: A webservice created in ABAP (FM,BAPI,FUNCTION GROUP) by using wizard . How to call this webservice in report or in any bsp or webdynpro application.
case 2: A webservice created in JAVA,.NET or in any third party technology , how to use in abap(by considering that endpoint has been created for third party webservice)
points will be rewarded .
regards
panky

Hi,
case 1: for WDP, you can create the web service model via "Import Adaptive Web Service" or "Import Web Service Model (deprecated)" by supplying wsdl URL.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2bweb%2bservice
case 2: In ABAP, create a proxy object at trx code SE80.
http://help.sap.com/saphelp_nw04s/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/frameset.htm
Both cases are wizard-based. It's pretty intuitive.
- julius

Similar Messages

How to call webservice using jdev9i

Hi gurus and experts,
i need to consume a webservice using oaf. with great effort finally i created stub using axis s/w.
now i dont know how to use the stub in jdev.where to write the code and what to write.iam strucked :-( .
since there were no sample tutorial about how to call webservice from jdev9i, iam struggling to make.iam jus a starter.
and while googling i came to know that stubs can be created using jdev9i .but when i see new-->webservices--web service stub it is greyed out.
i have 2 questions now:
1)if stub created using axis can it be used in jdev9i? if yes ,please tell me how? any tutorial links also helps me.
2)if the stubs should be created only by jdev9i so that webservices can be called using jdev,then please guide me how to make it.
i need some helping hands from u guys.
Thanks a lot
Edited by: 881533 on Oct 25, 2011 2:34 AM
Edited by: 881533 on Oct 25, 2011 2:37 AM

Hello sir,
i got following reply:
<returnRecordResponse xmlns="http://xyz" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<returnResult>Error_request</returnResult>
</returnRecordResponse>
but correct response is
<returnRecordResponse xmlns="http://xyz" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<returnResult>Success</returnResult>
</returnRecordResponse>
can you tell me correction in the code which i have put on the forum?or tell me other way to call webservice?

How to call webservices in as3 (flash) and get its response

Hello
I need to know how to call webservices in flash cs5 as3 and how to track its response. any example ?
Thanks
Avneet

http://www.thetechlabs.com/tech-tutorials/xml/creating-a-as3-web-service-package-base-serv ice-class-and-simple-twitter-api/

How to call webservices in visuval composure CE 7.1 server

Hi ,
How to call webservices in visuval composure CE 7.1 server (WSDL) , please send step by step process
Thanks & Regards,
Suresh

I have exactly the same problem.
Here is what I found out:
In the browser based VC you have to use the Destination Template Managemet from NWA. The destinations are found during design time and can be called during runtime.
The NWDS version seems to work differently. You cannot see the destinations you created in NWA. Instead there is a preferences setting (Destination configuration). Here you can define the destination using WSDLs.
This works during design time.
But during runtime the call throws an error like 'Destination not found'. To me, it seems like a bug.
Does anybody have an idea how to solve this?
Thanks,
Michael

How to call webservice?

Hello,
i am trying to call webservice.i tryed following code for calling webservices via actionscript.it is givind the response.but it is not giving correct response.
is this correct way to call webservice?is there other way to call webservice?can anybody tell me,how to call webservice?
<mx:Application xmlns:mx=”http://www.adobe.com/2006/mxml” layout=”vertical” width=”420″ height=”380″ xmlns:net=”flash.net.*”>
<mx:Script><![CDATA[
import mx.rpc.soap.LoadEvent;
import mx.rpc.AbstractOperation;
import mx.controls.Alert;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import mx.rpc.soap.Operation;
import mx.rpc.soap.WebService;
private var serviceURL:String = "http://localhost:7080/icon-ws/services";
private var wsdlURL:String = "http://localhost:7080/icon-ws/bulkUpload.wsdl";
private function callWS():void {
var service:WebService = new WebService(serviceURL, serviceURL);
service.wsdl = wsdlURL;
service.loadWSDL();
var oper:Operation = service.getOperation("BulkUpload") as Operation;
oper.addEventListener("result", resultHandler);
oper.addEventListener("fault", faultHandler);
oper.send();
public function resultHandler(event:ResultEvent):void {
Alert.show("Result returned"+ event.result.toString());
public function faultHandler(event:FaultEvent):void {
Alert.show("fault: "+ event.toString());
]]></mx:Script>
<mx:Button id=”selectBut” label=”CALL webservice” click=”callWS()”/>
</mx:Application>

sorry for my english. I expect you understand me...
I do that extended sp
Code Block
use atdb_main_test
Declare @Object as Int;
Declare @ResponseText as Varchar(8000);
DECLARE @login VARCHAR(50);
DECLARE @user_passwd VARCHAR(50)
Exec master..sp_OACreate 'MSXML2.XMLHTTP', @Object OUT;
Exec master..sp_OAMethod @Object, 'open', NULL, 'get', 'http://172.xx.xx.xx:wwww/account.asmx?op=CreateEquipementMacAddress', 'false'
EXEC master..sp_OASetProperty @Object, 'user_login', @login
EXEC master..sp_OASetProperty @Object, 'user_passwd', @user_passwd
EXEC master..sp_OASetProperty @Object, 'p_nb_poste', 1
EXEC master..sp_OASetProperty @Object, 'p_id_site', 91400
EXEC master..sp_OASetProperty @Object, 'p_id_type_poste', 83
EXEC master..sp_OASetProperty @Object, 'p_adresse_mac', null
EXEC master..sp_OASetProperty @Object, 'p_num_serie', null
EXEC master..sp_OASetProperty @Object, 'login', null
EXEC master..sp_OASetProperty @Object, 'passwd', null
EXEC master..sp_OASetProperty @Object, 'default_gateway', null
EXEC master..sp_OASetProperty @Object, 'ip', null
EXEC master..sp_OASetProperty @Object, 'bCreateIPPhone', 'false'
EXEC master..sp_OASetProperty @Object, 'vlanId', 0
Exec master..sp_OAMethod @Object, 'send'
Exec master..sp_OAMethod @Object, 'responseText', @ResponseText OUTPUT
Select @ResponseText as ResponseText
Exec master..sp_OADestroy @Object
I use a SQL server 2000 and don't do anything else.
But it doesn't work
I don't know what to do ...
the message is (1 row affected) but no tupple is written in my db...
can you help me please ?

How to call webservice using flex?

Hello,
i want to call webservice in flex.i tryied following code.but it is not giving correct response.what is wrong with this code?
can anybody tell me ,how to call webservice in flex?
Code:
<mx:Script>
        <![CDATA[
public function button1_clickHandler(event):void
     ws.returnRecord(para1,para2);//i am sending two parameter to returnRecord service here
public function remotingCFCHandler(event:ResultEvent):void
trace(event.result);
]]>
</mx:Script>
<mx:WebService
     id="ws"
     wsdl="http://localhost:8500/flexapp/returnusers.cfc?wsdl">
    <mx:operation name="returnRecords" resultFormat="object"
     fault="mx.controls.Alert.show(event.fault.faultString)"
     result="remotingCFCHandler(event)"/>
<mx:Button label="Go" fontWeight="bold" click="button1_clickHandler(event)"/>

Hello sir,
i got following reply:
<returnRecordResponse xmlns="http://xyz" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<returnResult>Error_request</returnResult>
</returnRecordResponse>
but correct response is
<returnRecordResponse xmlns="http://xyz" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<returnResult>Success</returnResult>
</returnRecordResponse>
can you tell me correction in the code which i have put on the forum?or tell me other way to call webservice?

Related documents or links on how to call webservices from WDJ

Hi all
i need documents & links on how to call webservices from Webdynpro for Java.
if anybody send the documents on sample scenarios on the same then it is the great help to me...
Thanks
Sunil

Hi Sunil,
May these links help you.
http://help.sap.com/saphelp_nw04/helpdata/en/f7/f289c67c759a41b570890c62a03519/frameset.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/64/0e0ffd314e44a593ec8b885a753d30/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d2/0357425e060d53e10000000a155106/frameset.htm
and the below thread to call weservices in java.
Re: How to call a web service from Java
Regards,
Supraja

How to save report in PersonalCategory after creating it using java panel?

Hi,
Anybody knows How to save report in PersonalCategory after creating it using java panel?
I dont want to save it in public folder. I want to save report (webi) in user's personal category.
can anybody send me source code?
It will help me a lot.
Thanks in advance
Amol Mali

Hi teda,
i'm assuming that you have seen my post that i did successfuly save report in user's personal category.
Actually the report is created in webi java panel using RE SDK and is saved in Report Sample Folder then i'm saving it in user's personal category by following code
string query = "Select SI_PERSONAL_CATEGORIES From CI_INFOOBJECTS Where "
                     + "SI_INSTANCE=0 And SI_ID=" + reportID;
                InfoObjects infoObjects = infoStore.Query(query);
                InfoObject infoObject = infoObjects[1];
                Webi wreport = (Webi)infoObject;
                ObjectRelativeIDs personalIDs = wreport.PersonalCategories;
            /personalIDs.Add(Convert.ToInt32(categoryID));
               infoStore.Commit(infoObjects);
But the report is presents in the Folder also and in user's personal category also.
I dont want the report to be in the folder (Report Sample) if i saved it in user's personal category.
How can i do that?
any idea.
Please help me.
Thanks in advance
Amol Mali
Edited by: amol mali on Jan 9, 2009 7:55 PM

How to call webservices in BSP and ABAP

I am new to use webservices.Please help me to call a ABAP Webservice in ABAP program and How to call a other Webservice like Java Webservice in ABAP. Please give me steps to follow.
Thanks,
Suneetha.

May be this prog. will give u the required info.
Use a free web service in an ABAP program which validates * an email-id.
REPORT zvalidate_email.
PARAMETERS: p_mail(100) LOWER CASE.                 " E-Mail id to be verified
DATA: http_client TYPE REF TO if_http_client .
DATA: w_string TYPE string ,
      w_result TYPE string ,
      r_str    TYPE string .
DATA: result_tab TYPE TABLE OF string.
START-OF-SELECTION .
CLEAR w_string .
CONCATENATE
'http://www.webservicex.net/ValidateEmail.asmx/IsValidEmail?Email=' p_mail
INTO
w_string .
CALL METHOD cl_http_client=>create_by_url
    EXPORTING
      url                = w_string
    IMPORTING
      client             = http_client
    EXCEPTIONS
      argument_not_found = 1
      plugin_not_active = 2
      internal_error     = 3
      OTHERS             = 4.
CALL METHOD http_client->send
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2.
CALL METHOD http_client->receive
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2
      http_processing_failed     = 3.
CLEAR w_result .
w_result = http_client->response->get_cdata( ).
REFRESH result_tab .
SPLIT w_result AT cl_abap_char_utilities=>cr_lf INTO TABLE result_tab .
READ TABLE result_tab INTO r_str INDEX 2.
IF r_str+44(1) = 't'.
    WRITE:/ 'Valid email address'.
ELSE.
    WRITE:/ 'Invalid email address'.
ENDIF.

How to call webservice from Java application

Hi XI gurus
Pls let me know how to call a webservice from Java application.
I wanted to build synchronous interface from Java Application to SAP using SAP XI
For example, i need to create Material master from Java application and the return message from SAP, should be seen in Java application
Regards
MD

Hi,
If your JAVA Application is Web based application, you can expose it as Webservice.
JAVA People will pick the data from Dbase using their application and will send the data to XI by using our XI Details like Message Interface and Data type structure and all.
So we can Use SOAP Adapter or HTTP in XI..
If you use HTTP for sending the data to XI means there is no need of Adapter also. why because HTTP sits on ABAP Stack and can directly communicate with the XI Integration Server Directly
If you are dealing with the Webservice and SAP Applications means check this
Walkthrough - SOAP XI RFC/BAPI
REgards
Seshagiri

How to Call webservice by another webservice

Hi all,
Anybody knows how to call a webservice by another webservice.

Yep. Have a look at [Developing Java EE 5 Applications|http://help.sap.com/saphelp_nwce10/helpdata/en/44/c778033d5360eee10000000a155369/frameset.htm] and [Creating J2EE 1.4 Applications in SAP NetWeaver Developer Studio|http://help.sap.com/saphelp_nwce10/helpdata/en/46/69364d53070ea1e10000000a155369/frameset.htm].
HTH!
\-- Vladimir

How to call webservice application using Browser

Hi Everybody,
Synchronous Scenario: Calling XI Server using WebServices( Sending the Customer no through Soap and from there the receiver adapter RFC is picking that no and it will send it to R/3 using BAPI and getting the Customer Details from R/3.
I followed the below two blogs and I created the complete scenario. And I deployed the ear file in WebAs in xi server.
Now the question is how to run this program using the browser. That is how to call.
Message Interface Name: CDWS_MI
Service Name : Soap_Service
Namespace : urn:xiwebservicesusingwebdynpro.com
Can you tell me how to call through the browser?
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3592---- [original link is broken] [original link is broken] [original link is broken] [original link is broken]
>1
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3593---- [original link is broken] [original link is broken] [original link is broken] [original link is broken]
>2
Advance thanks,
Abdullah Shaik.

Hi,
It's not clear to me what you did. Have you exposed an XI Message Interface through a Web Service? Or have you developed a Web Service in the other way? What is the "ear" that you said? Is an webdynpro app? If it is, I think your question would be properly answered at WebDynpro forum
cheers!
roberti

How to Call Webservice in Portal Component?

Hi Experts,
    Currently, I have a URL of WSDL file, how can I consume this webservice in portal component. I know that we can call webservice via webdynpro application/standalone proxy/deployable proxy, but it seems different in portal component.
   Thanks & Best Regards,
   James

Accessing an External Web Services in Portal
Accessing an External Web Services in Portal
http://help.sap.com/saphelp_nw04/helpdata/en/e9/ae1b9a5d2cef4ea4b579f19d902871/content.htm
Consuming Web Service from ABAP
Consuming Web Service from ABAP

How to Call Standardapplication in Custom Applications in SRM-ABAP ?

Hi,
I want to Create a Custom Apllication in SRM 5.0 & i have to call a Standard Application.
I am new to SRM ABAP , can anyone help me how to Create Applications in SRM ABAP & How to Call Standard Application in SRM ABAP.

thank u

How to Call Webservicer using Visuval composure Ce 7.1 server

Hi ,
We are created in ABAP , they r exposed in WSDL , if i have to call That web services using visuval composure please ASAP can u send , how to call WSDL In CE 7.1 Serve
Thnks & Regards,
Suresh

Hi
you can try this links:
http://help.sap.com/saphelp_nwce10/helpdata/en/9f/9985f72084483cb316a3c2322fb090/content.htm
(here look for the therm Creating Web Service Physical Destinations that points to :
http://help.sap.com/saphelp_nwce10/helpdata/en/45/635dd614d73bdbe10000000a1553f7/content.htm
best regards,
v s
Edited by: v s on Dec 4, 2008 12:22 PM

How to Call Webservices in ABAP(Syntax) created in abap ,java etc

Similar Messages

Maybe you are looking for