How to Cancel a pushed Update

Good day
Recently I push an update, but the update seem to be currupted or not working on the way it shoud
when the client try to restart they get Updates
are being installed (1 of 1)...  Do not turn off or unplug your computer.  Windows will shutdown automatically 
After the computer restart
the update appear again telling that it will be installed upon restart. and the same problem happend.
When checking WindowsUpdate.Log, this is the Error I found
2014-02-26 10:34:27:140
2232 14e0
Report REPORT EVENT: {C5859317-E82C-435C-8F4C-361039C443EE}
2014-02-26 10:34:15:543+0400 1
182 101
{3F185CE2-32F3-4718-997D-931266298FCF}
1 80070643
AutomaticUpdates Failure
Content Install Installation Failure: Windows failed to install the following update with error 0x80070643
how can I removed the pushed update

Hi,
After you removed the update deployment, the clients need to update the policy(you could try to run Actions on the client). If the update has been installed, deploy a task sequence to remove it as Prajwal said.
To troubleshoot update installation, we need to examine UpdatesDeployment.log, UpdatesHandler.log, UodatesStore.log and WUAHandler.log.
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_SU_NAPLog
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • How can add and push updates to1000 clintes in WSUS non active directory

    Hi Can any one please help me on my requirement .
    We have 1000+Clients and we are going to use WSUS standalone server for push the updates to cleints in Non-Active Directory.p
    Please let me know do we have any way push the updates from WSUS server without GPO updates... ?

    Hi Can any one please help me on my requirement .
    We have 1000+Clients and we are going to use WSUS standalone server for push the updates to cleints in Non-Active Directory.p
    Please let me know do we have any way push the updates from WSUS server without GPO updates... ?
    This is almost an exercise in futility; at best it will be extremely painful.
    Aside from trying to wrap my head around why a 1000+ system environment would not have Active Directory deployed (in 2014!) in the first place, there's only one way you'll be able to achieve this objective: One Client At A Time!
    In short, you'll need to either use Local Policy on each individual system, or perform a REG IMPORT of the necessary settings. There may be ways to expedite the REG IMPORT, but that highly depends on the trust factor of the individual end-users, and whether
    they have local admin privileges on their system.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • TS1702 Does anybody know how to cancel a paused update for an app, so I can continue to use the original version?

    I accidentally hit an app to try to update and I immediately. Paused it but now I can't get into my app to use it! Its staying paused or tries to update! It's a dictionary app that I don't have enough room to update now! ( I do but it would take all I have left) so I would like to cancel it but it's not letting me! Help please! Thanks!:)

    What you want to do can't be done.  There is no low-friction way to combine image adjustments from Aperture and Lightroom.  There is no way at all to combine them without creating new files.
    This was recently discussed in this thread.
    Are you using the Edge Sharpening adjustment?  In Aperture 3, it superceded the old Sharpening adjustment, which remains included for backwards compatibility.

  • HT4623 I've updated my Ipad to IOS 7,0, the problem I'm is the Ipad has been updating Icloud settings for the past two days and it's not allowing me to do anything else. How do I cancel the Icloud update?......HELP

    I've updated my Ipad to IOS 7,0, the problem I'm is the Ipad has been updating Icloud settings for the past two days and it's not allowing me to do anything else. How do I cancel the Icloud update?......HELP

    Try a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
    iTunes free download from www.itunes.com/download

  • HT1222 How to cancel software update in ipad?????

    I am using ipad 2.. And accidently update the software.... I am on the road.. How to cancel it,,,,.????

    It's never a good idea to interrupt an iOS update. If it has already started, I would let it continue until done. If it's still *downloading* the update, there *may* be a point after the download finishes where you may be able to cancel it but I'm not sure about that.
    If it has already been updated (downloaded/installed), then no, you cannot go back to the previous iOS version (if this is what you are wanting to do).

  • How to cancel update firefox 29.0?

    How to cancel update firefox 29.0? I want back my Firefox 28.0 !

    Hello,
    can you please tell us about the problem you are facing using Firefox 29.
    Reverting back to an Old version generally doesn't solve the problems,
    Often when there is a problem with a Firefox update, people look for a way to go back to the previous version. That usually doesn't solve the problem and will make your computer and information vulnerable to attack.
    So, please tell us about your problem and we will try to help you best.

  • HT4623 how to cancel software update to ios6 on iPhone 4

    Hit update software w/o realizing it was going to update to ios 6. How do I cancel the download? Have it paused by suspending wi fi connection currently.

    Good evening  everyone who is having this problem  listed as "How to stop the software update on iOS". Software update of iOS starts downloading in background if the iPad or the iPod or maybe the iPhone is connected to a WiFi network and is charging.If you just tap "Download and Install" and having any kind of problem in downloading the iOS update or your carrier is charging too much for that limit of data or the update is too large for your data plan and you by mistake tap the "Download and Install" and the downloading started and you switch off WiFi and again switch it on but the downloading resumes.It is very easy to cancel the iOS update.You can just fill up all the memory with any thing you want like Photos,Videos,Games,Apps  and when the memory becomes less than the size of the update the update will be cancelled automatically  and display an error message saying "The update was cancelled due less storage available please free up some storage". Thank You for asking your problem.

  • How to cancel an updating Creative Cloud? I have not administrators rights on PC

    How to cancel an updating Creative Cloud? I have not administrators rights on PC

    Hi There,
    You can try to end Creative Cloud process, chec kthe links below.
    End a process - Windows Help
    Activity Monitor: Quit a process
    Thanks,
    Atul Saini

  • How can i cancel my osx update?

    How can i cancel my osx update?

    There is no safe way. If it's been underway a while don't. If it's been underway no more than 5 minutes, then you can force quit the installer by pressing COMMAND-OPTION-ESC, select the installer application, then click on the Force Quit button.

  • :)- I canceled the update from Snowleopard to Lion by cleaning my keys ^^. Hit the wrong key i thing. Now i'm very weird ...only can start in Windows and dont know how to get my Lion Update now...Cant start in Mac OS X (Snowleopard) now :((

    Hey Folks...i'm totally ****** off !
    ^^
    I canceled the update from Snowleopard to Lion by cleaning my keys ^^. Hit the wrong key i thing. Now i'm very weird ...only can start in Windows and dont know how to get my Lion Update now...Cant start in Mac OS X (Snowleopard) now
    Please tell me what i have to do know
    greets
    < Edited By Host >

    Hello fuchs (guess), If you cancelled while downloading the 4GB Lion, no problem, download again. Snow Leopard should run (start holding the option key).
    If you cancelled during the install process, I do not know. In this case you could try to start with the CMD + R keys pressed, and choose the restore, which may work if the creation of the restore partition of Lion has finished.
    If that does not work, reinstall Snow Leopard with the CD (start holding the C key), after that download the Combo Update 10.6.8 to update the Snow Leopard completely, then redownload Lion (App Store, click "purchases" while holding the Option Key, find Lion, click "install"). If you want to have your own copy of the Lion installer, you have to copy the installer to a Memory stick or burn to DVD before you install, see else where.
    Lex

  • HT4623 how to cancel updating iphone

    i really need help

    how can you possibly be on level 4 with an answer like that, medossa asked HOW? that is an instruction on how to cancel the updating iphone

  • How can I cancel a software update?

    I have two Blackberry phones and I updated one of them to the most recent software this morning (10.3.1), but I find it terrible. So, I decided not to update my second phone and I made sure it was not set to automatically update. However, it just popped up with a message that says the update has been installed and the phone must be restarted to take effect. When I checked the settings again, it has been changed to allow automatic updating!
    So, is there any way to cancel/delete the update short of simply never turning off/restarting the phone again?

    Hi and Welcome to the Community!
    Yeah, that default auto-update setting is annoying...I've made a habit of always checking it after any updates and turning it off.
    In any event, it's too late for that device...the update is installed, and can't be avoided now. The thing to do is restart and then use LINK to see if your carrier offers you a fallback. If they don't, then find an AutoLoader of the OS version you want and use that to install it to the device.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • UDO how to cancel Update button

    Hi !
    I'm using UDO and i would like to update manually some fields instead of the automatic Update with UDO's form ... Can i Catch this event and cancel the automatic updates to the table From UDO????
    Thanks

    Hi Alain,
    In your code you should get the event that was triggered and check whether it was the add button that was clicked. Then you do your code and then set the BubbleEvent parameter to false to not execute the standard processing of SAP Business One. Code sample:
    If pVal.BeforeAction = True Then
       If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED Then
          If pVal.ItemUID = "1" Then
             oForm = oApplication.Forms.ActiveForm
             'Do your code and saving
             BubbleEvent = False
          End If
       End If
    End If
    Hope it helps,
    Adele

  • How to cancel the event in Item Adding and display javascript message and prevent the page from redirecting to the SharePoint Error Page?

    How to cancel the event in Item Adding without going to the SharePoint Error Page?
    Prevent duplicate item in a SharePoint List
    The following Event Handler code will prevent users from creating duplicate value in "Title" field.
    ItemAdding Event Handler
    public override void ItemAdding(SPItemEventProperties properties)
    base.ItemAdding(properties);
    if (properties.ListTitle.Equals("My List"))
    try
    using(SPSite thisSite = new SPSite(properties.WebUrl))
    SPWeb thisWeb = thisSite.OpenWeb();
    SPList list = thisWeb.Lists[properties.ListId];
    SPQuery query = new SPQuery();
    query.Query = @"<Where><Eq><FieldRef Name='Title' /><Value Type='Text'>" + properties.AfterProperties["Title"] + "</Value></Eq></Where>";
    SPListItemCollection listItem = list.GetItems(query);
    if (listItem.Count > 0)
    properties.Cancel = true;
    properties.ErrorMessage = "Item with this Name already exists. Please create a unique Name.";
    catch (Exception ex)
    PortalLog.LogString("Error occured in event ItemAdding(SPItemEventProperties properties)() @ AAA.BBB.PreventDuplicateItem class. Exception Message:" + ex.Message.ToString());
    throw new SPException("An error occured while processing the My List Feature. Please contact your Portal Administrator");
    Feature.xml
    <?xml version="1.0" encoding="utf-8"?>
    <Feature Id="1c2100ca-bad5-41f5-9707-7bf4edc08383"
    Title="Prevents Duplicate Item"
    Description="Prevents duplicate Name in the "My List" List"
    Version="12.0.0.0"
    Hidden="FALSE"
    Scope="Web"
    DefaultResourceFile="core"
    xmlns="http://schemas.microsoft.com/sharepoint/">
    <ElementManifests>
    <ElementManifest Location="elements.xml"/>
    </ElementManifests>
    </Feature>
    Element.xml
    <?xml version="1.0" encoding="utf-8" ?>
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <Receivers ListTemplateId="100">
    <Receiver>
    <Name>AddingEventHandler</Name>
    <Type>ItemAdding</Type>
    <SequenceNumber>10000</SequenceNumber>
    <Assembly>AAA.BBB, Version=1.0.0.0, Culture=neutral, PublicKeyToken=8003cf0cbff32406</Assembly>
    <Class>AAA.BBB.PreventDuplicateItem</Class>
    <Data></Data>
    <Filter></Filter>
    </Receiver>
    </Receivers>
    </Elements>
    Below link explains adding the list events.
    http://www.dotnetspark.com/kb/1369-step-by-step-guide-to-list-events-handling.aspx
    Reference link:
    http://msdn.microsoft.com/en-us/library/ms437502(v=office.12).aspx
    http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspx
    Amalaraja Fernando,
    SharePoint Architect
    Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

    Recommended way for binding the list event handler to the list instance is through feature receivers.
    You need to create a feature file like the below sample
    <?xmlversion="1.0"encoding="utf-8"?>
    <Feature xmlns="http://schemas.microsoft.com/sharepoint/"
    Id="{20FF80BB-83D9-41bc-8FFA-E589067AF783}"
    Title="Installs MyFeatureReceiver"
    Description="Installs MyFeatureReceiver" Hidden="False" Version="1.0.0.0" Scope="Site"
    ReceiverClass="ClassLibrary1.MyFeatureReceiver"
    ReceiverAssembly="ClassLibrary1, Version=1.0.0.0, Culture=neutral,
    PublicKeyToken=6c5894e55cb0f391">
    </Feature>For registering/binding the list event handler to the list instance, use the below sample codeusing System;
    using Microsoft.SharePoint;
    namespace ClassLibrary1
        public class MyFeatureReceiver: SPFeatureReceiver
            public override void FeatureActivated(SPFeatureReceiverProperties properties)
                SPSite siteCollection = properties.Feature.Parent as SPSite;
                SPWeb site = siteCollection.AllWebs["Docs"];
                SPList list = site.Lists["MyList"];
                SPEventReceiverDefinition rd = list.EventReceivers.Add();
                rd.Name = "My Event Receiver";
                rd.Class = "ClassLibrary1.MyListEventReceiver1";
                rd.Assembly = "ClassLibrary1, Version=1.0.0.0, Culture=neutral,
                    PublicKeyToken=6c5894e55cb0f391";
                rd.Data = "My Event Receiver data";
                rd.Type = SPEventReceiverType.FieldAdding;
                rd.Update();
            public override void FeatureDeactivating(SPFeatureReceiverProperties properties)
                SPSite sitecollection = properties.Feature.Parent as SPSite;
                SPWeb site = sitecollection.AllWebs["Docs"];
                SPList list = site.Lists["MyList"];
                foreach (SPEventReceiverDefinition rd in list.EventReceivers)
                    if (rd.Name == "My Event Receiver")
                        rd.Delete();
            public override void FeatureInstalled(SPFeatureReceiverProperties properties)
            public override void FeatureUninstalling(SPFeatureReceiverProperties properties)
    }Reference link: http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspxOther ways of registering the list event handlers to the List instance are through code, stsadm commands and content types.
    Amalaraja Fernando,
    SharePoint Architect
    Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

  • How to cancel an idoc in status 64

    How to cancel an idoc in status 64

    Hi Manju,
    If you have table updation access then
    Go to SE16 --> Table EDIDC --> Give your "IDoc number" -->  change the status from 64 to "73 IDoc archived".
    Or you can ask to your ABAPer to do that.
    Hope it helps,
    Regards,
    MT

Maybe you are looking for