How to cancel a service request?

I had been running the Ipod in the car and noticed it had gone into the red. I turned it off and it went off normally. When I got home I hooked it to the computer to charge and it froze up completely, no response to anything, hold button, click wheel, weirdest yet, the backlight stayed on permanantly. And the computer did not recognize that it was even connected in Itunes or as a drive.
So I freaked out a bit and after an hour or so while( after trying what I could which was basically holding controls down and flipping the hold button off and on ) I gave up and put in a service request, and went to bed.
The next day, I noticed that the Ipod was dark ( which I expected since the battery was almost gone and the backlite was stuck on ). But just for fun I press the clickwheel on and lo and behold, it came back on as normal. I hooked it up to the computer as usual and it was visible to Itunes and the computer as it should have before. So I went through the reset process just in case and relaoded my music.
So I guess there should be a 6th "R" Let it sit over night and see if it still screwed up the next day
Now I'm stuck trying to figure out how to cancel a service after already receiving the return box Which was very fast by the way. Like, 2 days. Anyway, I looked all over the support site and could not find anything that looked like what I needed.
Does anyone have any idea what I need to do to cancel the service request?
Mike
Dell Dimension 8400   Windows XP Pro  
Dell Dimension 8400   Windows XP Pro  

Call apple...
Apple Phone Numbers
btabz

Similar Messages

  • Cancelling a Service Requests

    How do you cancel a service request?

    Calling them and letting them know?? That's what I would do.

  • Can't figure out how to open a service request

    I need to return a 7925 wireless set and can't figure out how to open a service request with the new support format.
    Any suggestions?

    I found the button that I was looking for and was able to open a service request

  • How to cancel an erase request made through find my I phone

    I lost an I phone and through " find my I phone " I found it was offline so I made a request to erase the phone when connected to internet.
    Next day I found it, how to cancel that erase request? I am afraid if I opened it it will connect to internet and be erased
    Anybody can help ?

    unlick wrote:
    same case happened to me but i got it backed up a day b4. now the problem is.... it is taking forever to erase the phone.
    the spinning bars is at the center of the screen for hours now and it is still spinning. any clue?
    It's probably waiting for the phone to come back on line so it can communicate with it.

  • How to create a Service request using Exchange connector in SCSM 2012

    HI ,
    I am able to create Incident request using exchange connector.Could you please let me know that how can i create Service request using Exchange connector 3.0.
    Thanks in advance. 

    Hi,
    Select a service request's template for new work items on the last wizard's page.
    Cheers,
    Marat
    Site: www.scutils.com  Twitter:
    LinkedIn:
    Graveyard:

  • How to cancel my service online if I am out of the US?

    how to cancel my service online if I am out of the US?

    International Support - Verizon Wireless
    Good Luck

  • How can I create Service Request ?

    Hi,
    I registered oracle account in order to create a service request. And the Customer User Administrator responsived 'Approved'.
    But now I can't see 'Create SR' button. I'm just able to access SR List.
    How can I access 'Create SR' button ? Help me !

    Make sure that in your role (step 2) is checked "Can Create" for Service Request.

  • How to Submit a Service Request with Essential laptops

    [quote]
    Submit a Service Request
    Create a technical or warranty service request ticket and check its status using our online ticketing system.
    Note:
    i) Only applicable for THINK branded products
    ii) For IDEA branded products, kindly contact our support centre for assistance.
    [/quote]
    Which option do we use, with Essential brand laptops? I have a G710 and have been unable to navigate the tech support pages very well.

    hi mutecebu,
    Thanks for using Lenovo Forums!
        For Idea Branded Lenovo Product,
    You should Contact Lenovo Technical Team for Hardware Software Assistance.
    http://support.lenovo.com/en_US/feedback/detail.pa​ge?LegacyDocID=MIGR-76613
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to create a Service Request with Oracle SOA 11g

    Hi,
    I work with a company that is a Diamond level partner to Oracle. In one of our project with SOA 11.1.1.5 we are facing some random product issues.After much thought, we decided to contact oracle support and raise a service request and report the problem to them so that they can help us in the resolution for the same.
    Can someone please let me know the process of creating a Oracle Service Request for the same. Thanks in advance.
    Regards,
    Sridhar.

    Hi,
    The link is https://support.oracle.com , you will have to request Oracle to link your user with your company support account.
    Cheers,
    Vlad

  • I am unable to figure out how to cancell this service.  Please cancell it for me asap. anne.stawiski

    I need to cancell my service.  It is not working for me. Just signed up today.  [email protected] is my id

    Hi,
    I am sorry the subscription did not work out for you. I have cancelled your subscription, and set the refund process in motion.
    Your refund no.is 66183193.
    Regards,
    Florence

  • How to cancel a remote request at the POA?

    Hi,
    today we had the problem that a user running the gwclient in remote mode
    had requested the download of an email attachment. This attachment was
    very large and because of the bad internet connection at his location,
    transfer was aborted several times. Because of that the user cancelled
    the remote request on his side (= gwclient).
    Problem was, that this request has been transmitted to our POA and any
    time the user connected again via remote mode, the attachment transfer
    started from scratch; making it impossible to sync the other (newer)
    mails.
    In the past I was able to delete remote requests at the POA, by deleting
    the user's directory below "../ofwork/ofdirect/". This time the user did
    not have such a directory, therefore nothing I could delete.
    Is there any other way to get rid of remote requests??
    Thanks in advance,
    Frank

    Maybe TID10080811 has the answer.
    >>> Frank Langner<[email protected]> 2/10/2012 9:40 AM >>>
    Hi,
    today we had the problem that a user running the gwclient in remote mode
    had requested the download of an email attachment. This attachment was
    very large and because of the bad internet connection at his location,
    transfer was aborted several times. Because of that the user cancelled
    the remote request on his side (= gwclient).
    Problem was, that this request has been transmitted to our POA and any
    time the user connected again via remote mode, the attachment transfer
    started from scratch; making it impossible to sync the other (newer)
    mails.
    In the past I was able to delete remote requests at the POA, by deleting
    the user's directory below "../ofwork/ofdirect/". This time the user did
    not have such a directory, therefore nothing I could delete.
    Is there any other way to get rid of remote requests??
    Thanks in advance,
    Frank

  • How to cancel a service order

    Hello Expert,
       I want to cancel a service order (created via iw31) in status CRTD. Can you please suggest me a BAPI or something like that which help me on this.
    I try BAPI_ALM_ORDER_MAINTAIN but it' can't be use to cancel service order.
    Do we need to confirm a service order than only we can cancel it. I am not very sure but if a SO created by mistake or no more useful. we need to cancel it then why the confirmation required.
    Please suggest.
    Regards
    Swati..

    There is no requirement for confirmation as far as i know and BAPI suggested is used for cancelling the confirmation of an order ...In your case   we want a order to be cancelled but what is that you mean by cancellation is it deletion or logical deletion why can't you change the status to what you want using the BAPI suggested by you  and using the appropriate methode available in this BAPI for status change ....provide the status change is permiteed manually ..however CHANGE Change objects and DELETE Delete objects methodes should help you delete the service order which has been created by mistake ....BAPI_TRANSACTION_COMMIT is a must ...
    Thanks,
    Anjaneya .

  • How to use internet service request in webdynpro abap

    Hi everybody,
    We are planning to use ISR in our webdynpro application. It would be great help if any body can give any pointers or input on ISR(internet service Request) i.e what is its configuration and usability in eretail.
    Thanks
    Shweta

    Hi,
    What's your ITS version? You can define ITS services using SE80 --> Internet Services or through SICF transaction. You assign several parameters to your service (~transaction, ~webgui, ~generatedynpro, ~webgui_simple_toolbar, ...).
    Look this link:
    http://help.sap.com/saphelp_47x200/helpdata/en/98/854c2b328911d480a000c04f99fbf0/frameset.htm
    Then you have to verify it and then you can use it. You can also define new theme for your service.
    Hope this helps,
    Iván.

  • How to resubmit a cancelled apple service request?

    I submitted a request to get my iPod nano 1st gen recalled. I got lazy and never sent it in, in time so the status got cancelled. I don't know where to resubmit it, and it won't let me do it again with the serial number. Any help helps ;), thanks.

    You will need to call AppleCare.

  • How to save web service request key and response value in cache to reduce calling the service for same type of requests

    Hi
    I have a web service which return the response based on the request key.
    I need to save the key and the response value in cache for around 30mins
     to reduce the web service calls for better performance.
    Appreciate if any once can share a sample code

    using System.Runtime.Caching;
    public List<string> cachingwebserviceresponse()
    {//Create a cache key
    string strParameters = "1234";//Create a cache value holding object
    List<string> results = new List<string>();//Create a cache
    ObjectCache cache = MemoryCache.Default;//Assign key for the cache
    string cacheKey = strParameters;//Check whether the key exists in the cache//If exists assign the values from the cache instead of calling the webservice//else call the web service and add the response to the cache
    if (cache.Contains(cacheKey))
    results = cache.Get(cacheKey);
    else
    { //calling the web service client
    using (service.webservice fd = new service.webserviceContractClient())
    { //Call the web service function to get the results
    results = fd.DataSearch(strParameters);
    } //Create the cache expiration policy. I have created for 30 minutes.
    CacheItemPolicy cacheItemPolicy = new CacheItemPolicy();
    cacheItemPolicy.AbsoluteExpiration = DateTime.Now.AddMinutes(30); //Add the response to the cache based on the key
    cache.Add(cacheKey, results, cacheItemPolicy);
    return results;

Maybe you are looking for

  • Ken Burns Effect Simple Question :)

    I'm doing a video slideshow in iMovie '09 and I'm using the Ken Burns effect to pan around the pictures. I'm narrating a childrens book, and as I get to the end of the Ken Burns effect on the photo (zoomed in a little), I'd like to keep the image the

  • When I backup my phone on iCloud the files in my Numbers app do not show in my back. Before backing up the Numbers

    When i backup my iPhone 5 on iCloud my files in Numbers app do not show in my PC when I log into my iCloud account. Before backup the switch for Numbers & Document & Data are both swithed on too, yet it does not show why ?

  • OWB & Sarbanes-Oxley

    I posted some time ago about OWB having trouble with public synonyms (it cannot import public synonyms during Import, and generate code cannot select from public synonym unless the name of the db link is explicitly set in the config properties). Mark

  • MYSQL to ORACLE  blob migration issue

    Hi I am currently migrating a mysql schema to Oracle. I have used the SQLDeveloper Migration Workbench to generate the scripts to capture the data and to upload the data to oracle. However I have an issue with one particular table (which contains blo

  • Export pdf en excel

    Depuis hier après midi le transfert ne fonctionne plus , ni sur mon mac ni sur mon xp. Au mieux, il me transforme mon tableau pdf en docx ! (ce qui donne un fichier vide), bien que je coche xlsx?????