How to Cancel Delivery which is created in VL04
The user has created the Delivery in VL04.
Plz guide me on How to Cancel Delivery which is created in VL04 ?
I followed VL09 & VL02 process,
but at VL09 it states that PU Withdrawn Qty. exceeded.
At VL02 it only shows the Display Mode.
HI,
I also think you can delete the delivery even if its created from VL04.
Try using VL09N for reversal and then delete the delivery by VL02N.
Let us know.
Regards,
SB
Similar Messages
-
How to find out which user create folder
how to find out which user create folder in shared drive?
Hello,
you have to enable Auditing in on the DCs OU and also on the top folder level where this should be monitored.
http://technet.microsoft.com/en-us/library/cc784387(v=ws.10).aspx
http://support.microsoft.com/kb/310399
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights. -
How to get object which is created previously?
Hi ,
My question is that how to get reference of the object which is created previously using reflection API.
that means,
suppose i created one instance of class : ABC
Class classAbc = Class.forname("ABC"); //load the class ABC.
Object abcClassObject =classAbc.newInstance(); // create an instance of classABC.
now how do i retrieve that object which is referred by ref. variable abcClassObject?
expecting a favourable reply,
Thanks & regards ,
SwapnilMy question is that how to get reference of the object which is created previously using reflection API.
Object abcClassObject =classAbc.newInstance(); // create an instance of classABC.
now how do i retrieve that object which is referred by ref. variable abcClassObject?abcClassObject is already a reference to it. Just use it. Nothing further required. -
How To Cancel the Material Document Created in VL09
Dear All,
I have a crictical issue,please guide me to solve this.
User has created the order and delivered on 31-03-2011,again he has reversed in VL09 on 07-04-2011.but the actual goods issue should happen only on 31-03-2011.Now when i try to deliver the same order on 31-03-2011 it's throwing error like defict of SL stock.I can't even cancel the material document that got created in VL09.I have to deliver only on 31-03-2011.
Kindy guide me to solve this.
Regards,
VenugopalIt is a mess! when the delivery is reversed, the user should have used correct reversal date. Now you can't cancel the material document. Consult MM specialist to add the quantity in the past period and off-set the same in the current period.
On a second thought, check with your accounting if you PGI in the current period as the reversal and new PGI happened in the current period, which off-sets the entry in accounting.If they are OK, then you need not bother about this.
Regards,
Edited by: Shiva Ram on Apr 7, 2011 11:56 AM -
How to sort file which is created in background......
Hi All,
I have executed ALV report in background and it is generated, But after generating the report comes in ALV LIST display. how to sort field of ALV List which is generated in background ?
YusufSolved
-
How to cancel task which are in Queue state in SCOM console?
Hi All,
When I start any task it does not execute. It show task is in queue state. How can I cancel or execute this task?
ThanksTo cancel Task, you can use following steps:
In the Monitoring workspace, expand Operations Manager and then expand
Agent Details.
Click Agent Health State.
In Agent State, click an agent.
In the Tasks pane, click Flush Health Service State and Cache.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer" -
How to cancel confirmation which is in error
Helly Guys,
I have created a PO with wrong G/L account, and confirmantion has been done but with error. G/R couldn't be created due to the error.
I was able to correct the PO in SRM with correct G/L account and it auto changed in ECC but when it came to confirmation, I found there is no way I can cancel/redo it. As a result G/R still can't be generated.
Guys, please let me know, if I am not following the correct process....
We are at SRM5.0 extended classic.
Regards
NeeleshHi
I am afraid through configuration.. this might not be possible..
Anyways.. look for the SPRO -> Influence message Control ..
SPRO>Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Message Control-->Influence Message Control.
Otherwise, opt for some BADI solution given earlier...
Related pointers ->
Re: Message control in SRM
Re: PurchOrder <PO number> : Enter Conf. Control
Combination of GR/IR control not allowed for external services
Do let me know.
Regards
- Atul -
How to Change Delivery quantity after creating Transfer order
Hi
I created a transfer order for my delivery with LT03. There is already non-ordered quantity in my delivery.
delivery quantity is 5 but transfer order's quantity is 4.
i want to change my delivery quantity without confirming the transfer order.
Is it possible
is there any customization or function for that work ?
in se37, i tried BAPI_OUTB_DELIVERY_CHANGE. it returned the error "there is an unconfirmed transfer order"
Moved to SD froum from LE forum at the request of OP
Edited by: Csaba Szommer on Apr 18, 2011 1:21 PMIf you set "Copy WM quantity as delivery quantity into delivery" for your WH/wm-mvt combination in WM/Shipping interface, the delivery quantity will be always adjusted to the picking quantity ("1" in field V_T3333-WMMUE).
The same can be achieved manually as it was told you by Andrzej.
There's no separate function modul to do this.
When system is processing FCODE "KOMU_T" (manual process) the delivery quantity will be changed in include MV50AF0F_FCODE_KOMU in internal structure "lips":
IF xlips-pikmg > xlips-lfimg OR likpd-kzebu IS INITIAL.
PERFORM check_and_set_pikmg_lfimg CHANGING lf_subrc.
CHECK lf_subrc = 0.
ENDIF.
But this is one thing, there's some preparation before this step and and the change in "lips" will cause the change of "xlips" later on, etc.
So, it is related to several programs (includes) and forms.
Please contact your ABAPer if you are not familiar with technical things.
Edited by: Csaba Szommer on Apr 18, 2011 10:55 PM -
Cancellation of proforma invoice created.
Sir,
Kindly explain in detail as how to cancel the proforma invoice created through Stock transport order through SDHi,
You cannot Cancel the PROFORMA INVOICE, you can only COMPLETE it
Goto VF02 for the Proforma invocie and in the BILLING DOCUMENT--->COMPLETE you can complete it.
The reason behind this is,
PROFORMA invoices cannot be cancelled as they wont post to Accounting , so not neccessary to cancel
you can create many proforma invocies referring to Preceeding document as it does not impact on any subsequent document.
regards,
santosh -
How to cancel the delivery number in the billing due list
Hi Gurus,
My User has created the Consignment Fillup order and Dlivery for that order.
Now User asking that the delivery number coming into Billing Due list (VF04).
As you know all for Consignment Fillup there is no invoice. Please suggest me
how to cancel the Delivery number in Billing Due list for above scenario.
Br,
SatishWhat you have faced is not at all an issue. Its a standard behaviour only. Though you are not generating commercial invoice here, you can generate (F8) proforma via VF04 in bulk. Either you can generate one proforma per delivery or consolidate multiple deliveries into one proforma which it depends on VTFL copy control for the field Data VBRK/VBRP. There if you maintain 001 or 007, you can club multiple deveries and if you maintain 003, one proforma per delivery can be created.
thanks
G. Lakshmipathi -
How to pick additional delivery quantity after creating Transfer Order .
Hi
Sales order has been created for 30 pc of material , with reference to this sales order , delivery has been created .Afterwards I created transfer order in lt03 and got it confirmed in LT12. However , PGI has not been carried out .
Afterwards , I went to VL02N and manually increased the materialsu2019 quantity to 60 pc in delivery .
In delivery packing status is partially picked .
I request you to help me how can I pick another 30pc as already transfer order has been created and confirmed for this delivery .
Either system is not allowing me to cancel transfer order in order to create fresh transfer order to with reference to this delivery . Otherwise , I could have done it .
Could you please suggest me , how to go about it .Hi
There is an excellent way to handle your issue
While creating TO in t code LT03 in the initial screen control tab if you give pick quantity as 2 after the TO creation the system will simultaneouslely do PGI also in a single shot
This means the delivery quantity cant be changed in the VL02N
The whole VL02N will be display mode fully greyed out
That means after TO you cant change the delivery
If extra qty has to be added then it has to be a separate order only
I have practised this only and for the past two hrs i was breaking my head how come you are changing delivery after TO creation and for me it was in display mode(fully greyed out) even in VL02N and i found out i am using adopt pick qty as 2 in the initial screen of LT03 which does PGI in a single shot
This should be a good solution for you
Even the solution suggested by Mr.Raj Malhotra you will face the same problem
Regards
Raja -
How do I confirm which delivery cost of MIRO has done or not?
Dear SAP Guru,
Please give me suggestion, how do I know which delivery cost has completed the Invoice Verification or not.
Thanks
ShoyebDear,
I would suggest you to use table EKBZ "History per Purchasing Document: Delivery Costs"
This table stores all the data related to delivery cost which we have mentioned in PO (i.e GR,MIRO etc)
Say in your PO for a line item you have 3 freight charges (FRA1,FRB1,FRC1)
So when you perform MIGO -> EKAB table will store those 3 freight charges along with the condition type with amount
Similarly when you perform MIRO for these costs it will create entries for those as well
So by entering the PO no and item no you can easily compare for which costs MIRO is pending
In EKBZ table use EBELN (Po no.) EBELP (Po item no ) and ZAEHK (Counter ) and find for which lines
VGABE =1 is there but VGABE =2 not there
{VGABE = 1 MIGO (I.e goods recept) 2 = MIRO (Invoice receipt) and KSCHL = Condition type (FRB1)}
Like this you can get the list of the Pending delivery cost for MIRO
Edited by: redriver on Jan 3, 2012 9:30 AM -
Id email address cancelled. how do I log in and create new password?
id email address cancelled. how do I log in and create new password?
This link tells you how to change your Adobe ID and password:
http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
And if it doesn't, there's a "Still Need Help?" link which leads you to web chat where you can talk with a person. -
When I tried to create and apple id using my gmail account i found that somebody has already created an apple id using my gmail id. So I gave forgot password option and reset the password of the id. But for resetting the security questions, link is going to some other email id which is created by the other guy. Now the problem is that the other guy also can reset my password and access my account.
I contacted apple customer care and they are not ready to help me saying that I need to give information about the last device I logged in using this id. How can I give it when I did not create it?:) Also they are saying this account has been verified and that could happen only if someone has hacked my gmail account and verified the id using the link sent by apple.
Later I did some experiments and found that this is a security flaw from apple. Somebody has created the id and never used it(I tried to loggin to icloud and it was saying this account was not used it any apple device). The account became verified when I reset the password.(This is a bug, account should be verified only when we click on the verification link sent by apple).
The other mistake apple did is that they allotted my gmail account to someone before it's verified eventhough it cannot be used unless verified. Actually apple should allot the account id only after verifying the email address.
Apple customer care is not ready to help and I am tired of fighting with them. Can any of you guys suggest any means of getting back my gmail id to use it as apple id?I don't think you're going to be able to. I would guess the other person used your address by accident, and when he found he couldn't access the account (because you'd changed the password) he abandoned it. Your GMail address is now locked to that account and even if it was changed you can't use it to create another.
You already have an Apple ID, which you use to log in here; you can use that to create an iCloud account if that's what you are trying to do. If you want to create a different Apple ID just get another free address such as a Yahoo one. -
How to delete all TABLEs in Schema SYS which are created since 09:15?
Unfortunately a script created lots of tables in the wrong Tablespace (=SYSTEM) and Schema (=SYS).
How can I delete (in one DDL command) all TABLES which are created inTablespace=SYSTEM and SCHEMA=SYS
during the last 3 hours resp. since 09:15 of 25th Sep 2011 ?
Alternatively: How can I move these TABLEs to another Schema (e.g. ATEST) and Tablespace (USERS)?
Is this possible with Oracle XE or only with Oracle Enterprise?
Peteruser559463 wrote:
Unfortunately a script created lots of tables in the wrong Tablespace (=SYSTEM) and Schema (=SYS).
How can I delete (in one DDL command) all TABLES which are created inTablespace=SYSTEM and SCHEMA=SYS
during the last 3 hours resp. since 09:15 of 25th Sep 2011 ?
Alternatively: How can I move these TABLEs to another Schema (e.g. ATEST) and Tablespace (USERS)?
Is this possible with Oracle XE or only with Oracle Enterprise?
PeterYou can query dba_objects and join it with dba_tables where tablespace_name='SYSTEM' , then drop the tables result of the query; the idea is to use the following query;
SQL> select OWNER, OBJECT_NAME from dba_objects where OBJECT_TYPE='TABLE' and OWNER = 'SYS' and CREATED >= sysdate - 3 / 24;Please consider marking your questions as answered, when it is the case;
Handle: user559463
Status Level: Newbie
Registered: Feb 18, 2007
Total Posts: 583
Total Questions: 266 (186 unresolved)Edited by: orawiss on Sep 26, 2011 4:03 PM
Maybe you are looking for
-
What is the best procedure to update from Leopard (or Snow Leopard) to Mavericks?
The pacient: Macbook Pro A1278 Running 10.5.8 -- but have an Update DVD to 10.6 (Snow Leopard) Got slower in start-up Very slow in power-off (takes lot of time on shut-down!) What is the BEST procedure to update it from Leopard to Mavericks? A) updat
-
Pavilion g6 2291sa not booting up
Hello, I have a Pavilion g6 2291sa that is refusing to boot up. The power light is on, the wireless light is on and the caps lock light turns on and off but there is no sound coming from the hardrive and nothing coming on the screen. I have tried a h
-
What should the real world transfer speeds be on the SATA drive?
I've getting the following speeds on my Hitachi Deskstar drive that shipped with my MacPro. I read somewhere that the hitachi drives shipped running at a lower speed and one had to use the tools supplied on the Hitachi website (DOS disk!!) to enable
-
Hi! I have been using PSE7 for a while, but now it has stopped working. I get no kind of error message, it just doesn't start. I have tried to start it directly from the installation directory, and also tried to start the PhotoshopElementsOrganizer.e
-
Recovery partition recovery area is missing
I have a Satellite L505-S6946 with an invalid recovery partition. I must have damaged that area at some point though not really sure what I did. I neglected to have created any recovery disks. Is their a way to have this partition restored somehow or