How to cancel messages in SXMB_MONI with status "No receive found"
Dear All,
I need to cancel message with error status as mentioned in captioned subject.
Can you please guide me how to do it?
Regards,
Saras Jain
One more thing to check.....confirm if there is any background job scheduled to cnacel the message once it goes into error....if it is cancelled in this manner...if so you wont be allowed to cancel the (already cancelled) message manually
Regards,
Abhishek.
Similar Messages
-
How to delete the messages from sxmb_moni with status cancelled
Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
SumanI think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
1. In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
2. Select the job(s) to be scheduled.
3. Specify the start time and date.
4. Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs. -
Restart a process or message in SXMB_MONI with status "Cancelled Manually"
SDN Crew,
This is query regarding the BPM process.
I have cancelled a process in MONI manually, Now i want to restart the process...
If i try to restart the process, it throws an error "only messages with error could be restarted and messages already processed or cancelled could not be resatarted".
How to solve the issue?
and also i want to restart the process because though i set the Poll interval in the Send Comm Channel as 60 sec, it processed only one message and that to in error(which i cancelled manually) no furthur processing is done i mean if u check for processed messages only one message is shown but it has to show similar error messages for every 60 sec?
i am new to BPM so could someone tell lme if i am doin gsomewhere wrong?hi,
its posible,
take a look of this blog
/people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages
Thanks
Rodrigo
ps:reward points if useful -
You cannot cancel a change request with status New.
We're just starting to dive into SCSM. We created a test Change Request and now want to delete / cancel it. When we try, we get a message
"You cannot cancel a change request with status New."
Is there an easy way to remove this?
Orange County District AttorneyHi, a Little late but..
This is a problema from your 3 scsm services, maybe in your principal or secundary server. You must to restart services in an special order and delete application cache.
Please review
http://www.systemcentercentral.com/scsm-2012-tip-all-workflows-stuck-in-new-status-and-never-completing-issue-and-workaround/
it Works!
If you have principal and secondary do it in both servers.
I think this problem is for bad performance in databases and application, so review your hardware design, and logical, so review workflow performance too.
For items when state new, you must change it to inprogress with smlets -
How to show message on selection screen status bar if alv is empty.
Hi,
Can anyone tell me how to show message on selection screen status bar when our final internal table or alv is empty .
i am getting message on alv status bar, where no data is in alv but i want to stop it to selection screen and show message there only.
Regards,
RanuHi,
After populating the final internal table do this check,
if it_final [] is initial.
message 'No data available' TYPE 'S' DISPLAY LIKE 'E'.
exit.
endif.
This will be displayed in the selection screen itself
Regards,
Vikranth -
How to CANCEL/RESEND messages in Adapter with status system error in bulk?
Hello all,
I d like to know how can I CANCEL or RESEND messages with status error SYSTEM ERROR in adapter framework.
Messages failed because of receiver system un-availability. Now, we have more than 50.000 messages stuck, waiting for being resent or cancelled.
But from the Message Monitoring Tool at Runtime Workbench Monitoring, I can only process up to 200 messages each time.
So, its practically imposible to do it manually.
My question is how can I deal with that amount of messages? Is there a way to process them in bulk and get them cancelled in only one step/action?
Many Thanks in advance.Hello, I hope you are doing fine!!
The most common way to cancel these messages is through the Runtime Workbench as you have mentioned youu2019ve tried.
Just one note: Once you are on the Message Monitoring screen -> Filter (where you can select the dates, message status, etcu2026), there is a Dropdown box menu at center of the screen called u201Cmaximum Numberu201D where I believe you said you can only see 200 messages.
You may try to select u201C10.000u201D there and then cancel these messages from there.
However, if you prefer doing this in one go, you can do this by changing the status of the messages from u201Cerroru201D to status u201Cdeliveredu201D by executing following SQL statement at the database level:
UPDATE <DB Schema>.XI_AF_MSG SET STATUS='DLVD' WHERE MSG_ID='<MSG ID>
AND DIRECTION='<INBOUND OUTBOUND>'
Cheers,
Jorge Eidelwein -
How to cancel messages in "Transfer to process engine" status
Hi All,
In our production env, few of the messages in SXMB_MONI are stuck with the flag "Transfer to Process Engine". I would like to know where I can find these message or how canI cancel these messages. I checked all the options in "SMB_MONI_BPE", but could not find my message.
I want to find that message and cancel it out as I don't want it to consume server resources.
Any help would be appreciated.ANy how if you want to delete those BPM runtime instance you can do so by deleting the logical instance of the BPM instance
go to SXMB_MONI and click on PE which got stuck and it will take you PE engine go to list technical options and chose workflow log option and then chose delete logical instance option
/people/michal.krawczyk2/blog/2009/03/18/xipi-bpe-admin--logical-deletion-of-a-process-instance
Rajesh -
Cancellation of Inspection Lot with Status LOLK
Lot with Origin 08 has the status "ICCO SPCO BRRQ LOLK". Stock has been scrapped through movement type 713 from the quality inspection area but the lot is still is displaying in QA32.
When we are trying to remove the status LOLK through QA12 system is not allowing to enter into screen and giving message "This function cannot be carried out."
How to cancel or remove this lot?Hi,
status LOLK means Lot locked for batch record
So go to QA32 and select the relevant inspection lot and go to the Usage decision tab.
Click the menu bar " Usage Decision" and go to
Functions-block for batch record---deselect
Then save the lot and come again to functions--- cancel the lot.
By doing this you can cancel your lot
How to cancel or remove this lot?
Hope your problem will sorted out
Give a try and confirm
Regards
Hari -
How to find out the projects with status "Invalid"?
I'm new to Oracle Projects -OP. We are on 12.0.4. This' my new job.
I have a task of "Remove projects with status 'Invalid' ".
Questions:
How to access the OP forms to verify the existent of the invalid projects?
What are the PA tables having the status info -- I mean those showing the status with 'Invalid'?
Thanks A lot.
an apps dbaI could not find a sample for the DELETE_PROJECT. I have coded the delete project by modifying the sample of the CREATE_PROJECT.
-- delete a project with the status INVALID shown in pa_project_statuses.project_status_name
--set serveroutput on size 20000
DECLARE
-- Variables needed for API standard parameters
l_api_version_number NUMBER := 1.0;
l_commit VARCHAR2(1) := 'F';
l_return_status VARCHAR2(1);
l_init_msg_list VARCHAR2(1) := 'F';
l_msg_count NUMBER;
l_msg_index_out NUMBER;
l_msg_data VARCHAR2(2000);
l_data VARCHAR2(2000);
l_pm_product_code VARCHAR2(10);
l_responsibiity_id NUMBER;
l_user_id NUMBER;
l_pm_project_reference PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
l_pa_project_id PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
API_ERROR EXCEPTION;
BEGIN
-- GET GLOBAL VALUES
select user_id, responsibility_id
into l_user_id, l_responsibiity_id
from pa_user_resp_v
where user_name = 'J23N'; -- need to get from Apps
--SET GLOBAL VALUES
pa_interface_utils_pub.set_global_info(
p_api_version_number => 1.0,
p_responsibility_id => l_responsibiity_id,
p_user_id => l_user_id,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status);
-- PRODUCT RELATED DATA
l_pm_product_code := 'R_INVALID'; -- can be user defined
-- PRODUCT DATA (PROJECT_IN_REC_TYPE)
l_pm_project_reference.pm_project_reference := null;
l_pa_project_id.pa_project_id := 1001;
--INIT_CREATE_PROJECT
--pa_project_pub.init_project;
dbms_output.put_line('Before delete_project');
--DELETE_PROJECT
pa_project_pub.delete_project(
p_api_version_number => l_api_version_number,
p_commit => l_commit,
p_init_msg_list => l_init_msg_list,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_pm_project_code => l_pm_product_code,
p_pm_project_reference => l_pm_project_reference,
p_pa_project_id => l_pa_project_id
-- Check for errors
if l_return_status != 'S'
then
raise API_ERROR;
end if;
dbms_output.put_line('Deleted Project Id: ' || l_pa_project_id.pa_project_id);
--dbms_output.put_line('Deleted Project Number: ' || l_project_out.pa_project_number);
Commit;
--HANDLE EXCEPTIONS
-- Get the error message that were returned if it did not complete sucessfully
EXCEPTION
When API_ERROR then
dbms_output.put_line('An API_ERROR occurred');
if l_msg_count >= 1
then
for i in 1..l_msg_count loop
pa_interface_utils_pub.get_messages(
p_msg_data => l_msg_data,
p_encoded => 'F',
p_data => l_data,
p_msg_count => l_msg_count,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('error message: ' || l_data);
end loop;
rollback;
end if;
When OTHERS then
dbms_output.put_line('An error occured, sqlcode = ' || sqlcode);
if l_msg_count >= 1
then
for i in 1..l_msg_count loop
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => 'F',
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('error message: ' || l_data);
end loop;
rollback;
end if;
END;Can anyone with the experience of PA_PROJECT_PUB make comment on this Delete Project block? On the struncture level is it correct?
I run it and get
pa_project_pub.delete_project(
ERROR at line 48:
ORA-06550: line 48, column 3:
PLS-00306: wrong number or types of arguments in call to 'DELETE_PROJECT'
ORA-06550: line 48, column 3:
PL/SQL: Statement ignored
Please make your comment on the structure (the logic) of the delete project before providing the advice on the debug.
I would like to make sure the logic is correct first.
TIA -
ABAP program to Cancel messages in Scheduled/Recorded status?
Hi,
Thanks for reading my post...
Can anyone tell me whether there is an ABAP program available (or a variant) that will Cancel messages that are in Scheduled (or Recorded) status?
Messages to be sent from ECC to PI were not sent and are left in Recorded status in ECC. I cannot find the documentation to explain what this status is, but I'm presuming that it's similar to the Scheduled status in PI (though there's not much documentation about that either - for example, what's the difference between the 'green flag' Scheduled and the 'green flag' Released for Processing (WS)? ). {Note to SAP: Could we have a state transition diagram please? Simple, concise and effective.}
Anyway, the 'tick-pencil' button in SXMB_MONI (aka. CTRL-F8) can be used to cancel the messages in Scheduled/Recorded status. But I'm looking for an ABAP program to do this. The documentation seems to 'suggest' that this button might do the same thing as the ABAP program RSXMB_CANCEL_MESSAGES. However, this ABAP program does not cancel messages in Scheduled status (only the messages in Error), whereas the SXMB_MONI CTRL-F8 'tick-pencil' will cancel messages in Scheduled status if they are selected.
Is there another ABAP program available to cancel messages in Scheduled status - or is it possible to create a variant of RSXMB_CANCEL_MESSAGES that will do this? (I'm not an ABAP programmer and I've never created a variant, but looking at the code, it seemed it might be possible to get the program to read messages in Scheduled status rather than Error status.)
Many thanks for any help.
MarkMessages are in scheduled status because they still in the queue in either 'READY' status or 'EXECUTING' status (see SMQ1/SMQ2). You don't want to automatically cancel messages that are in scheduled status because that means you are also going to cancel good messages. However, in some cases, you may want to cancel such messages especially when the message in the queue has been in 'Executing' status for long time (happens in case of long running mapping program or dropped connection etc). Such cases warrant manual intervention and hence the behavior as noted by you.
If you can tell me why exactly you want to cancel messages that are in scheduled status, I can help you more.
Thanks
KK -
Messages in BPM with Status Waiting
Hi,
I have created BPM for Message Collect like the standard SAP Pattern BpmPatternCollectMessage. But for terminating Message Ive used Message type (Message interface) different from the Message type in the main Fork section. I thought that it is possible correlation between two message Interfaces with different Message types?
Any way I had an Error in my BPM and after a test the Status for my Messages is Successful for inbound and Waiting (Message being sent) for Outbound. All my Messages are collected in a Queue, Wait step is created but BPM dont proceed further.
So Ive made some changes in my BPM and tried with a new Test but it works with the old Version of the BPM and collects the Messages in the same Queue. So any idea how can I use the new BPM version? Should I Delete Manually the old Messages with Status Waiting or there is also different way?
Thanks
Naycho>>>I thought that it is possible correlation between two message Interfaces with different Message types?
yes it is
>>>>All my Messages are collected in a Queue, Wait step is created but BPM dont proceed further.
have you registered queues on XI? TCODE - SXMB_ADM - manage queues ?
>>>Test but it works with the old Version of the BPM and collects
try looking at: SXI_CACHE - integration process- check if your new process has 0 status - activated
Regards,
michal -
How long the messages in SXMB_MONI stay ?
Hi All,
In SXMB_ADM, the following parameter is set DELETE PERSSIT_DURATION for ASYNC messages for 21 days,
but still I am able to see the ASYNC messages in SXMB_MONI which are more then 50 days old,
how is this possible ? we do not do any archiving of messages,is there any other parameter which
rules the duration of messages in SXMB_MONI...
Please suggest me....
The second issue is we are able to see July month messages for all the interfaces except for one interface,
and now the consultant is asking me the reason for it...
Thanking you in adance.
Our server version is XI 3.0 (SP19)
Regards
SonaliHi Sonali,
The messages in SXMB_MONI gets archived and deleted when you schedule the archiving and deletion jobs.
These jobs can be scheduled for each interface.
I think the archiving and deletion jobs are running for a particular interface for which you are not able to see the messages.
You can check if the archiving and deletion jobs are running using transaction SM37. The jobs will run with name ARCHIVE and DELETE
Check in SXMB_ADMIN if the interfaces and retention periods are set for archiving.
Best Regards
Raghu -
How to reverse/change SRM PO with status "transaction completed"
We use Extended Classic scenario in our company. There is a PO has outstanding G/R balance, but user accidently hit the button "complete"on this PO in SRM , in result the PO has been completed with status "transaction completed". And nothing can be performed on this PO.
G/R balance is out there and now it has financial impact as it blocked the funding thru internal order.
Anyone have idea how we can resolve this problem. Can we reverse/change the PO status? Please note G/R canu2019t be entered in ECC as restricted.
Thanks,
FriedaI think it was CRM_JEST. But the way to easily select the correct entries:
1. Go to transaction BBP_PD
2. Enter BUS2201 and the order number
3. Double click on the status table, this will take you to SE16 with all the different status for the PO
4. Select the entry to delete
5. Enable debugging by putting /h into the transaction field
6. Double click "CODE" and change this to "DELE"
7. F8 (leave debugging)
8. Click on the delete icon and save.
Done. -
How to delete a PS network with status 'Technically Completed' (TECO)?
Dear all,
We have Webdynpro application, which will create a PS network in background. In the past it was working fine and many PS network are created. Now we have a scenario where some of the networks which are with status 'Technically Completed' (TECO) needs to be deleted from system. I tried to delete it from CJ20N, but it was not possible as the status is set to TECO. Please let me know how to delete a PS network which is with status 'Technically Completed' (TECO).
Thanks in advance.
Regards,
VijayThe cluster goes out and finds all networks that are available. This is an automatic process. As long as there is a network there, it will show it. If you don't want it to show, disable the interface and it will disappear.
. : | : . : | : . tim
Thanks a million Tim! Disabling the correct interface made it disappear!
Actually, I had disabled the interface before I started this thread. When you posted the suggestion, I went back and looked at the network connections again and found out that I had disabled the wrong interface! My bad!
However, here is the interesting thing:
After I disabled the NIC and it disappeared from the FCM I physically disconnected its cable (actually I disconnected all unused / unconfigured NICs) ....then I re-enabled it. Now I see that FCM does NOT pick it up again.
I think FCM picked up those NICs because at one time I had put that NIC in the production VLAN (from the switch side).
One observation:
If you have NICs in a HV machine which are not connected to a switch, they do NOT show up in FCM. Once you connect them to some network, they start showing up. I guess by connecting them to a network, they are able to see NICs in other HV nodes.
Take a look at this screenshot. I have 6 NICs in there which are disconnected, none show up in FCM
-Rajeev rajdude.com -
Cancelled messages in SXMB_MONI
Hi All,
There are some cancelled messages present in SXMB_MONI. Is there any way we can know through which User ID the messages were cancelled (as they were cancelled manually ).
Thanks,
VinodHi,
this is possible:
SXI_MONITOR
- - Select Layout
- - - Choose user name from parameters
- - - - Now you can see USER NAME in SXMB_MONI message at the every end of the list
is that what you wanted ?
Regards,
Michal KRawczyk
Maybe you are looking for
-
Problems opening Acrobat Reader 11 to edit a PDF
When logging into Adobe 11, I get an error message that says trouble signing in, yet my name is displayed in the top right corner. I have logged out and signed back in but Adobe 11 is not working. In addition, when I try to open a file with Reader,
-
FlashPro has encountered a fatal error
Hey all! Can't seem to find any solutions to this online... Can anyone help? As soon as I open Flash, I get this even before anything opens. Attaching the error pic. Any help would be greatly appreciated. Thanks! - Rob
-
Release Anchor for grouped object
Hi All How to release the Anchored object that has group of objects, Is there any property to find the anchored object with group. I need to find those anchored object with group and release the anchor, if the object is placed as inline I can find ot
-
How to find the duplicate entries in column
clolum name descripitoin ex: CLIENT_NAME | Last Name | First Name | Middle Name |suffix | Tendulkar Sachin Ramesh Jr.Sachin | | Sachin Tendulkar Ramesh Jr.Sachin | | Ramesh Sachin Tendulkar Jr.Sachin PANno | no | AUBIU1966E Address | Address of clint
-
Help