How to cancel my service online if I am out of the US?

how to cancel my service online if I am out of the US?

International Support - Verizon Wireless
Good Luck

Similar Messages

  • How to cancel a service request?

    I had been running the Ipod in the car and noticed it had gone into the red. I turned it off and it went off normally. When I got home I hooked it to the computer to charge and it froze up completely, no response to anything, hold button, click wheel, weirdest yet, the backlight stayed on permanantly. And the computer did not recognize that it was even connected in Itunes or as a drive.
    So I freaked out a bit and after an hour or so while( after trying what I could which was basically holding controls down and flipping the hold button off and on ) I gave up and put in a service request, and went to bed.
    The next day, I noticed that the Ipod was dark ( which I expected since the battery was almost gone and the backlite was stuck on ). But just for fun I press the clickwheel on and lo and behold, it came back on as normal. I hooked it up to the computer as usual and it was visible to Itunes and the computer as it should have before. So I went through the reset process just in case and relaoded my music.
    So I guess there should be a 6th "R" Let it sit over night and see if it still screwed up the next day
    Now I'm stuck trying to figure out how to cancel a service after already receiving the return box Which was very fast by the way. Like, 2 days. Anyway, I looked all over the support site and could not find anything that looked like what I needed.
    Does anyone have any idea what I need to do to cancel the service request?
    Mike
    Dell Dimension 8400   Windows XP Pro  
    Dell Dimension 8400   Windows XP Pro  

    Call apple...
    Apple Phone Numbers
    btabz

  • TS3274 How come My location services aren't working, I've reset the location warnings.

    How come My location services aren't working, I've reset the location warnings.

    For location the iPod uses the location of nearby routers that are in Apple's database of routers and their location. Thus it appears that Apple's database is incorrect. You do not have to be connected to the router, just within range.
    Apple periodically updates their database based on information they obtain from iPhones, The iPhone has to have turned on the option to send info to Apple. no one has found another way to get the location of a router added/corrected.
    You can confirm that by going to well-know place with wifi like Starbucks or McDonalds                              

  • How do i get a mac book pro to out of the box

    how do i get my mac book pro to out of the box.  clear everything off it and start over

    Boot with your original system installation DVD: with the disc in the drive, restart the MBP while holding the C key. From the Utilities menu, select Disk Utility. Erase the internal disk.
    Quit Disk Utility and install OS X. Install the applications that came with the MBP from the Applications DVD.

  • How do we create a promotion which is not out of the box?

    hello,
    how do we create a promotion which is not out of the box?

    Hi,
    You can create a new item item descriptor in /atg/commerce/pricing/pricingModels.xml.
    ~ Praveer

  • Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?

    Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?

    Use markers on every beat.
    The edit the zoom/scale to the markers.
    Adobe Premiere Pro Help | Working with markers

  • I am unable to figure out how to cancell this service.  Please cancell it for me asap. anne.stawiski

    I need to cancell my service.  It is not working for me. Just signed up today.  [email protected] is my id

    Hi,
    I am sorry the subscription did not work out for you. I have cancelled your subscription, and set the refund process in motion.
    Your refund no.is 66183193.
    Regards,
    Florence

  • How to cancel a service order

    Hello Expert,
       I want to cancel a service order (created via iw31) in status CRTD. Can you please suggest me a BAPI or something like that which help me on this.
    I try BAPI_ALM_ORDER_MAINTAIN but it' can't be use to cancel service order.
    Do we need to confirm a service order than only we can cancel it. I am not very sure but if a SO created by mistake or no more useful. we need to cancel it then why the confirmation required.
    Please suggest.
    Regards
    Swati..

    There is no requirement for confirmation as far as i know and BAPI suggested is used for cancelling the confirmation of an order ...In your case   we want a order to be cancelled but what is that you mean by cancellation is it deletion or logical deletion why can't you change the status to what you want using the BAPI suggested by you  and using the appropriate methode available in this BAPI for status change ....provide the status change is permiteed manually ..however CHANGE Change objects and DELETE Delete objects methodes should help you delete the service order which has been created by mistake ....BAPI_TRANSACTION_COMMIT is a must ...
    Thanks,
    Anjaneya .

  • How do I create a new row on tab out of the last column, last row?

    JDev 11.1.2.1.0.
    I've seen a few topics on this but none that I think were really very good solutions.
    Use Case:
    On tab out of the last column in the last row, a new row should be added to the end of the table. Bonus points for setting the focus to the first <af:inputText> of the newly created row.
    Complications:
    1. I'm having a heck of a time trying to find a function that returns the column's displayed index. Sadly, <column binding>.getDisplayIndex() returns -1 unless the user has manually re-ordered the column.
    2. Value Change Listeners only fire if there is a value change. Guess that means I need to do client/server listeners to check each and every <af:inputText> for a tab press?
    3. I'm not even going to get into setting the focus. With all the templates, regions, etc. going on, it's dang near impossible.
    Any ideas on how to attack this one?
    Will

    Hi,
    You will need to use the Run Engine Installation Wizard found on the Tools menu. In addition you need to create a installation set for the operator interface.
    Look at Chapter 16 Distrubuting TestStand ( chapter 17 for version 2).
    Once you have created your installation, install is on your new system.
    The serial number etc is part of the process model. When you run the entry point 'Test UUTs' the PreUUT callback is executed which asks the user for the serial number.
    Hope this helps
    Ray Farmer
    Regards
    Ray Farmer

  • I have a file with 64 pages in it.  How do I save and email one specific page out of the file?

    I have a file with 64 pages in it.  How do I save and email one specific page out of that file?

    With nothing but the free Reader? Take a screenshot of the page and email the image.

  • In AS3 how can you detect if someone pulls their camera out of the USB port?

    In AS3 if the SWF gets a hold of someone's camera successfully and they start streaming video across and everything, but then mid-stream, either they accidentally wiggle their camera out of the USB port, or the camera just sort of breaks down, or something else like that, how could you detect it from that user's side?  I've tried using event listeners and also polling different variables every five seconds, but neither has worked; none of the public properties of Camera or its events seem to act funny at all when something like that happens.  And apparently you can't just keep scanning the computer for devices (for good reason, I guess).
    Is there something I'm missing here?  Is there a way to detect from a user's copy of a SWF (FP or AIR, but much more importantly FP) when their camera has effectively stopped as the result of something going wrong, such as them wiggling it out of the computer by mistake?  If so how?  Thanks!

    Run your code and disconnect your camera. What are the common properties of it? Does your stream stop? Return only a specific color frame? Those things are usable to detect it but you're right in saying you can't detect much more than a loss of packets from a NetStream object.

  • How to cancel iPhone repair online?

    Yesterday i had requested an online repair for my iPhone as it had a speaker fault. So this morning when i woke up, my iPhone was lying on the floor, i think must've dropped it while asleep. Well anyways, i tested it all and it seems to be working fine, the speaker problem is sorted now
    So now there is no need to send it for repair, how do i cancel this? I have also recieved an empty box from Apple with AppleCare box. What do i do about them?

    Call AppleCare.

  • How to cancel Verizon service

    >>Duplicate post removed to comply with the Verizon Wireless Terms of Service  See Rip off<<
    Message was edited by: Verizon Moderator

    Did you check your usual data usage over the last year to see if 2 GB was enough for you? If you normally used more than 2gb a month while you had your unlimited plan then going with that plan was clearly a mistake. You could have paid full retail to keep your unlimited plan. You can also opt to get a higher gb plan...especially since you don't have wifi. If you're having issues with your phone you can get a replacement under warranty or swap to a different device while you're under the 14 day period. You mentioned Sprint...if they can meet your service needs then maybe that will be a better fit.

  • How to add a service account in SQL Server to display the "Service Account Name" and "Display Name"

    Can someone
    help with steps on how to add the following in SQL Server 2012 environments?<o:p></o:p>
    "Service Account Name" and "Display Name"<o:p></o:p>
    Your help will be greatly appreciated.<o:p></o:p>
    leonie6214

    Hello,
    Is the following article what you are looking for?
    http://msdn.microsoft.com/en-us/library/ms345578.aspx
    If not, could you explain a little bit more what you want to accomplish?
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • HT2731 Please can you tell me how I cancel a subscription that is on my iphone?  The iphone has broken and have been told to cancel it on itunes???

    I need to cancel a weekly subscription that is through an app on my iphone - the iphone isn't working and has been sent away so they have told me to cancel the subscription through itunes??  I have tried allsorts and really don't know how I can access my itunes account to cancel subscriptions.  Please help as I can't afford for this money to keep being taken off me.

    http://support.apple.com/kb/HT4098
    Regards.

Maybe you are looking for

  • I can not get LabVIEW to respond to a VB6 ActiveX event

    I am working with a VB6 ActiveX dll (VBtablet.dll is a wrapper for Wintab32 for a tablet interface) using LV8.2.1 and can not get it to respond to an event.  I have opend the object and registered it for callback, but have had no luck in having an ev

  • Wireless workgroupbridge not working

    I have just installed new equipment on a site. 2 buildings have there connection using a wireless bridge This wireless bridge consists of 2 x 2602 Autonomous AP's. Switch 1 <--> AP1  << wireless >> AP2<-->Switch 2 AP1 is configured as follows: dot11

  • Syntax of a query rule to exclude results from site collection

    Hi, I'm trying to edit a query rule to exclude results from a site collection. I'm coping the "Local SharePoint Results" and want to add something like -path=http://server/sites/demo/* but somehow it doesn't work. can someone help with the exact synt

  • Application crash with message "Hidden Wnd that Fires connection points"

    Our Swing application regularly crashes with a Windows error message popup. Title: "Hidden Wnd that Fires connection points: javaw.exe - Application Error" Message: The instruction at "0x7c912905" referenced memory at "0xfffffff8". The memory could n

  • QOSMIO x870 shutting down when in sleep mode

    I'm not sure if this is working as intended or not. I was working with the ECO setting to put my computer to sleep after certain amount of time. Once it was asleep for a certain amount of time, it would go into a shutdown/hibernation mode. It turns b