How to cancel/ reverse Quality Inspection Stock

Dear Friends
Some quantity of raw material is cleared from quality stock of raw material storage through a MT 321. Pls tell me how do I get them back in quality stock again?
After getting the material back to quality stock in raw material storage, i have to reverse th MIGO doc.
Pls advise
Thanks
Chandra

hi
i think you have not fully gone through the link i provided.
After the stock has been posted to unrestricted stock .execute t code MIGO specify the movement type as 102( if you have performed 101 previously) then in the item detial you have to specify the stock type as unrestricted and save the document .
then do the cancellation of lot
for your information you cannot able to get back the stock in Quality inspection if the earlier posting has been done in QM ,hence you have to cancel the document and do the MIGO 101 again which will create new inspetion lot
regards
thyagarajan

Similar Messages

  • How to use quality inspection stock

    Hi,
    Plz tell me How to use quality inspection stock.can i use quality inspection stock for any transaction directly.
    Now i have 100 quality inspection stock is there.but i am not taking these stock to unrestricted use stock.i want use these stock to all transaction like 301,303,309.......
    it is possible or not

    hi
    Use t-code MB1B to transfer stock from quality inspection - unrestricted-use stock
    Movement Type 321 Transfer posting stock in quality inspection - unrestricted-use stock
    The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
    You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
    Possible special stock indicators: E, K, O, Q
    u2022 K Goods receipt for purchase order to consignment stock
    u2022 O Goods receipt for purchase order to stock of material provided to vendor
    u2022 E GR for purchase order or order to sales order stock
    u2022 Q GR for purchase order or order to project stock.
    regards
    Vishal

  • Unrestrected use stock to quality inspection stock

    Hi,
    plz tell me how can transfer Unrestrected use stock to quality inspection stock for same material and same palnt

    Hi Prasad, Make sure that inspection type 08 is assigned and activated in Material Master's QM view. Then you would be able to move the stock from unrestricted to quality using MB1B (Mvt/Type 322).
    Also check : Stock Reversal - From Unrestricted to Quality
    Edited by: m_n_novice on Sep 5, 2009 2:02 PM

  • Cancel the quality inspection movement on good receipt

    I am trying to cancel a quality inspection movement from qual. Inspect. to
    unrestricted use.  Here are the details:
    1. A goods receipt was entered for Material XXX  batch YYY for
    1900kg.  It was entered  Aug 1, but was backdated to post on July
    29.
    2. I think  an accident was made and the person
    entered  the good receipt  into quality inspection status, rather than in unrestricted
    use.
    3. this  person  used   the   movement  321 without success .
    4. Now it will not allow me to post goods issue with a back date of Friday
    July 29.
    When i try to reseverse the good recipt i received an error message Deficit of BA Stck.in qual.insp 1.900 KG
    Message no. M7021.
    Can you help me?
    Thanks in advance

    While doing reversing change stock type .

  • Automatic batch determination for quality inspection stock

    Hello, gurus.
    Could you please, help me with the following problem: I have received on the certain storage location some quantity of material maintained in batches into quality inspection stock with 501 movement type. Now I would like to make reverse posting, but I do not want to use cancellation of the document, I need to use 502 movement type and determine batch from quality inspection stock with automatic batch determination in MIGO transaction. I assigned Batch search procedure to 502 movement type and created all necessary condition records. I use Checking Group for Availability Check ‘CH’ and Checking Rule for Availability Check ‘03’ where I include quality inspection stock. However no batch can be determined. But if I use 331 movement type, everything is OK, the batch is determined without any problems. If I manually put batch and valuation type for the material, the system shows no error.
    Why it is not possible to do automatic batch determination for quality inspection stock then?

    OK, let us talk abou it. I check it in my system, actually 502 can work, but I can't trigger BM determination by 501. Maybe BM determination onlys to select some existing batches for consumption. For 501 in my pratice I can select all the existing batches to be added or just add a new batch.

  • Quality inspection stock

    Hi experts ,
    Whenever a material is procured from a particular vendor then at the time of posting goods receipt that material by default to be posted in Quality inspection stock alone not in Unrestricted use stock,i.e. posting in unrestricted use stock should not be allowed at all . If the vendor going to differ means then it can be posted in Unrestricted us stock .
    Kindly help me how to do this.
    - Neo

    Hello Neo,
    There are two options in this case,
    1. If using QM module, then as suggested by Srinivas, you need to maintain QM info record for the vendor which are subject to Quality material.
    2. If you are no using QM module then you need to flag mark "Post to Inspection Stock" check box in purchasing view of material master. But in this case, the material will be posted as QI stock for all the vendor, however you can change it during PO and GR.
    Hope this helps.
    Regards
    Arif Mansuri

  • Delivery  is accepting material in Blocked & quality inspection stock

    Hi Experts,
    During delivery ( VL01N) the system asks for Serial Nos for the delivered Material and serial Nos are assigned by going to Extras--> serial Nos. and PGI is completed
    In this process the system could able to take the serial Nos that are in Blocked (07)or Quality (02) state also apart from the Unrestricted Use.
    How can we restrict the system to prevent selecting the stock/material apart apart from 01 state ( i.e unrestricted use)
    Regds
    Rajiv

    You have customize that availability check which runs behind delivery to check what are the stock available.
    You have to make sure u unchecked the quality inspection stock and blocked stock
    thanks

  • OMJJ - Where I diferentiate "Stock quality inspection" -  "Stock unrestricted use"?

    Good morning, experts!
    I need to know how to set up a move for the input material in quality stock, without having to use the QM or configure the material. We have the standard movement 503 that is received at the stock in quality inspection and the movement 501 that the entry into stock unrestricted use. In what field of transaction OMJJ I make this differentiation?
    I appreciate your help.

    Hi,
    If one you use 501 the stock is sent to Quality inspection, then this could happen because you have checked the Post to Insp. stock indicator in the material master (Purchasinf view).
    Post to Inspection Stock
    Specifies whether the material is subject to quality inspection (without inspection lot processing) and whether a goods receipt is posted to inspection stock. The indicator is copied to purchase order items and goods receipt items as a default value.
    Dependencies
    You can select this indicator, if no stock-relevant inspection type has been selected in the inspection setup, and therefore no stock-relevant inspection lots can be created.
    If you activate a stock-relevant inspection type, the entry in this field is deselected and can no longer be maintained. In this case, a corresponding indicator in the inspection type controls whether goods are posted to inspection stock.
    When you use 501 the stock should be posted as unrestricted stock, then you can move the stock from Unrestrected to Quality Inspection stock using movement type 322 (use t-code MB1B).
    With movement type 321 you can move from  Quality Inspection stock to Unrestricted.
    Kind Regards,
    Mariano

  • Backflush Semifinished product and stock post to quality inspection stock

    Dear Experts,
    Please advise is it possible for the below in SAP. How to do?
    When backflush "Semifinished product", system automatically post to quality inspection stock. Then it is skip for 9 lots. The 11th lot again post to quality inspection stock.
    1st backflush posting -> post to quality inspection stock
    2nd until 10th backflush posting -> post to unrestricted stock (skip)
    11th backflush posting -> post to quality inspection stock
    Thanks.
    Regards,
    Wong

    Dear Experts,
    Let me further explain what I want.
    Production people produce semifinished product, but quality inspection people not inspect all the product. For example they will inspect 1st and 11th batch of product only.
    So I propose when backflush the semifinished product, system post the stock to quality inspection stock. Then production people know this batch of product need to be inspected and pass to quality inspection people. Once quality inspection people complete the inspection, they will release the material (UD) to unrestricted stock.
    I have no idea on how to configure and maybe it is not possible in SAP. Please advise.
    Question: Is it we should manually create inspection lot for each transaction (eg. backflush or material movement)?
    Thanks in advance.
    Regards,
    Wong

  • How to cancel/reverse confirmation of service in SD module?

    Hello
    How to cancel/reverse confirmation of service in SD module?
    By confirmation of service I mean document which we can see in SD documents flow (if scenario is without goods movement).
    User need to delete delivery but confirmation of service and sales invoice were posted. We reversed invoice but do not know how to cancel/reverse confirmation of service.
    Additionally u2013 is there any transaction where I can look at confirmation of service? It is NOT possible to look at this document in flow documents.
    Thank you in advance.
    Arek

    Hello
    Thank you for response.
    It was NOTcreated in CS module. There is nothing in iw33.
    It is confirmation of service in SD module.
    Flow:
    - you create sales order
    - you create delivery with reference to sales order
    - you post goods issue (if quantity for picking is 0 u2013 no movement in stock) confirmation of service will be created by the system. Now I need to cancel this document.
    Best regards
    Arek

  • MBBE-"Quality. inspection" stock shows Inspection lot as "Unrestricted"

    Dear All,
    In MMBE, a material is available in "Quality Inspection" stock.
    We checked in "QA32". There we can see, it is in "Unrestricted use".
    How to move the stock from "Quality Inspection" to "Unrestricted use".
    Any suggestions.
    Regards,
    Mullairaja

    create a inspection lot manually for the qunatitiy that is still in Q-status and do a usage decision

  • User moved Quality inspection stock from sloc 290 to 295 via Migo_tr(311)

    Issue -User moved Quality inspection stock from storage location 290 to 295 (no Quality) via Migo_TR(311)
    Now they want the "Q" status to be reflected under storage location 295 ,pls help how it can be done.
    Background- RMA processing was correctly performed for this stock .from RMA # >inbound delivery >PGR >create & confirm TO>QA11 >LU04 and LT12 that bring the stock to storage loc 290

    Explore mvt type           " 323 "     Transfer posting quality to quality within plant

  • Storage location extension for Blocked and Quality inspection stocks

    Hi All,
    Could any one explain how to extend a Storage location (which is actually maintained for the Returns) to make use for the Blocked and Quality inspection stocks. Does this require any config settings.
    Thanks in advance.
    Kalyan

    Hi,
    Thanks for the Reply.
    Let me be more clear,in describing my requirement. Actually the present Storage location is maintained for only Returns. But in addition to this I require to make use of this storage location for the purpose of the maintianing Blocked Stock or QI stock.
    Therfore to achieve above what are necessary steps or do i need to maintain any config settings for this.
    Thank You,
    Kalyan.

  • FG material in Prod Ord once 101, goes to Quality Inspection Stocks

    Hello,
    I would like to ask, why does one of our Finished Goods in our production order once confirmation 101 was done to it, the stock went to the Quality Inspection Stocks? We have check its material master data Quality Management Tab and below are what we see on it:
    in the Procurement Data Section:
    QM proc. active was TICK
    QM Control Key = 0000 (No active functions, info message)
    in the General Data Section:
    Inspection Setup was not TICK (no inspection set-up was maintain for the finished goods)
    That is why we wonder why it still been cue to QI stock once 101 was done? how could we check this and where else does this things occuring? please guide and help us to resolve the problem of ours.
    Thanks

    Hi,
    Is this inhouse produced or the Extenally procured material.
    in case externally produced material check the Qinfo record for the same also.
    reg
    satheesh

  • SD delivery goods issue of Quality inspection stock

    Hello, anyone know whether SAP allow goods issue of quality inspection stock?
    If stanrdard customizing not possible, any user exit ?

    Hi
    No sap not allows GI for QI stock
    Beacuse Once Stock in QI without inspection we can't issue goods
    Hope ths helps
    Please reward points
    Sunil

Maybe you are looking for

  • Adding button for report on a form OR as a quicklist selection

    In order to make this easy for my sales guys, is there a way to add the option to run a custom shared analysis from a form (add an option button)? For example: When the sales rep creates an opportunity and adds product revenue to it, he will need to

  • Is there a way I can view/manage devices linked to my iCloud account?

    Is there a way I can view/manage devices linked to my iCloud account? I know how to view the devices linked to my iTunes account, but I am not sure if this is possible to see with an iCloud account.

  • Add RAM to MacBook Pro 13 Inch Late 2011

    Is it okay if I added RAM to my MacBook? now my RAM is 6GB. this will make my macbook more heat or not because it need to process big RAM right?

  • App reverts to old Executable Name when run by AppleScript?

    Currently I have an app that I made in AppleScript that does a variety of different tasks when it runs. Part of the task that it performs includes opening up another app which I did not build but downloaded off the Internet (secondaryapp.app). The or

  • PC Card for MacBook

    Hi, i have a PC Card (wireless 3G CDMA) I use with my laptop PC and I would like to use it in with a MacBook that lacks the PC Card slot. Is this possible via an USB adapter or so? Thanks.... /Mans