How to cancel serial no. profile from material master ?

dear all SAP experts,
            I have 1 mateial in which i assign serial no. profile in work scheduling view in material master. So how can cancel serial no. profile from material master ?
Suggest me
regards,
Nitin Nerkar

As long as no serial numbers exist for the material you are able to cancel or change the serial number profile.
As soon as serial numbers exist for the material and you want to change or delete the serial number profile, you must note the following:
The previously assigned serial numbers are no longer suited to the current serial number profile.
The indicator for the stock check may have changed. If this is the case, you can copy the profile settings in the serial number using the executable report program RISERNR9. However, you should only start this program once the changes have been updated in the material master record.
You can no longer delete the serial number profile in the material master record. Instead of this, you create a serial number profile without serialization procedures in Customizing and enter this in the material master record.

Similar Messages

  • How to remove sr. no. profile from material master

    Dear all,
    I have maintained serial no. profile-Q001 in plant data/stor.2.
    But now I want to remove serial no. profile from material master.
    but it showing message serial no. already assign to this material.
    Pls suggest
    Thanks
    Shabbir.Kureshi

    Dear Thyagarajan,
    I have got the solution.
    Thanks a lot.
    Thanks & Regards
    Shabbir Kureshi

  • How to Remove batch mangement indicator from Material Master

    Hi
    I am trying to remove batch mangement indicator from Material master..but system does not allow
    Before this .. I have done all activities also ...clear open SD documnets ,deliveriy documents ,PO documents ,Process order teco and . reservations and activae deletion flag in  batch  ... and made current period  stock an previous period  stock zero... i have cleard all documnets ...still system does not allow remove indicator..could you please guide in this issue ..how to remove batch indicator.
    Regards
    Sasi

    Hi,
    Please refer the below links.
    Re: untick Batch Manegement Indicator on Material Master
    Remove batch management flag and deletion of material documents
    How to remove Batch Management in the Material
    Re: How to remove Batch Management Check in the Material
    Thanks.

  • How to remove the serial no profile in material master

    Hi experts
                   While changing the  SerialNoProfile in Material master i am getting the following error message: Serial numbers already assigned to this material    Please tell me the procedure how to remove the serial number profile for the material.

    hi
    it is not possible to change the serial number profile once the serial numbers are existed for material .you can however create a separate serial no profile without serialization procedure and assign the same to the material
    Also refer [serial number|http://help.sap.com/saphelp_erp60_sp/helpdata/en/3c/abc17e413911d1893d0000e8323c4f/content.htm]
    regards
    thyagarajan

  • How to addthe field 'external material group' in MM60 from material master

    Hi
    In MM60, I need to include the field 'external material group' from material master
    How can I do this?
    Is there any other report that gives me this information with material code?
    please help
    Regards,
    shetty

    >
    shetty123s wrote:
    > Hi
    >
    > In MM60, I need to include the field 'external material group' from material master
    >
    > How can I do this?
    >
    > Is there any other report that gives me this information with material code?
    >
    > please help
    >
    > Regards,
    > shetty
    Not possible in MM60.
    Develop a report using table MARA with field EXTWG

  • How do I remove extra profiles from color mangement in Print Module?

    How do I remove extra profiles from color mangement in Print Module?

    If you're talking about the "short list" then click on other and then uncheck the ones that you don't want displayed. If you're talking about the long list, then you will have to browse to the folder containing the profiles and then delete them manually.

  • How to identify undefined classification material list from material master

    Hi ,
    1. I would like to identify the materials which is not having classification view from material master. 2. how to maintain the same in mass transaction. kindly give replies for the same.
    Thanks,
    Hari

    Hello Kara,
    To main classification in all materials follow the below process.
    Go to t code MM50.
    Insert material no. or number range, and material view from Maintenance status (classification) and after that press execute (F8) button.
    Click on the check box and press Maintain materials button.
    Select required class types and press enter.
    Finally press save button.
    Thanks.
    Ashfaque Hasan.

  • How do you remove provisioning profiles from iOS 6?

    I am looking for them under the usual path "settings/general/profiles" but that option seems to be gone now.  How do I erase provisioning profiles from my iphone 4 now?

    Yeah Apple !
    As your provisioning program is plain ******** before setup correctly…
    How to you restart from scratch ?! Com-mon !
    <Edited By Host>

  • Deactivate inspection type from material master

    Dears
    i have a inspetion qty with satus LTCA CHCR(Cancelled inspection lot)
    Now i need to deactivate inspection type from material master
    system not allowing to deavtivate as inspection lot was there
    how to remove the insepction qty form system
    Any tips
    Faisal

    Hi Faisal,
    Hi Faisal,
    Try this way,,,
    Run QA08
    Enter the Plant, Material Code
    Then go for the Fourth tab "Mass Processing"
    Activate the check box for Activate Despite Inspection Stock and Create Change Documents
    Then insert the inspection type.
    Execute
    System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.
    Select the Line item and Save.
    Pls let me know if doesn't work.
    Regards,
    Shyamal
    Let's do it again, When you complete the following steps, are you getting any list of materials there? after completing it up to
    System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.

  • Shelf life from material master not flowing into purchase order

    Hai friend
    I have set a shelf life value in material master ( both minimum & Total shelf life). 
    But while creating purchase order, values are not flowing from material master to purchase order.
    The field is empty.
    How to configure, please help.
    Regards
    Rammohan

    1.activate batch management
    2.to calculate SLED production date/date of goods receipt is mandatory during GRN
    3.Maintain characteristic for production date MCH1 - LFWRT
    4.assign this to class
    5.Maintain this class to material
    6.Now do GR ,it will prompt for production date .based on this ,sytem will calciulate SLED
    hope it helps

  • Profit Center is not taken from Material Master

    Dear all,
    When we post material-related items from SD or MM with link to material/plant (as additional account assginment) then Profit Center is taken from Material Master. But when I manually (FB01 or even FBR2) post similar item with link to material/plant (as additional account assginment) then Profit Center is not taken from Material Master.
    Why this happen? How to fix it? We need to derive Profit Centers from Material Master for items that have links to material and posted via FI.

    >
    Jigar Thakkar wrote:
    > Hi,
    >
    > It will also take effect in FI, as we have defined the same. Status will be 3 (Other transactions + cross-company (orders + billing doc.) for Subsitution in T code 0KEL
    >
    > Regards,
    > Jigar
    Just checked this. It's not worked. This subst. not even called (I've checked w/ active Trace).
    So, the question is still open. How to derive PCtr from material in manual FI (FB01, FBR2) transactions.

  • Print DMS Document from Material master

    Hello All,
    Can you advice on how to Print the DMS Document as a smartforms  from Material master ?

    Hi Arvind,
    You have mentioned two different terminologies here.
    DMS
    Material Master
    From DMS, you need to download the attachment and the same attachment can be converted using the FM CONVERT_TO_OTF then try displaying the same into your smartform.
    I'm not aware of Material Master Document attachment.
    Will reply soon with that solution also.
    Regards,
    -Wahid Hussain.

  • Subcontracting PR picking value from material master.

    Hi!
    We require that the subcontracting pr should pick the value from info record not from material master ,how can we do this ?
    thanks and regards,
    Suranjana

    Hi ,
    as per std SAP
    price in Pr will always be picked from material master
    for materials without material master - it has to be entered manually
    It cannot be picked from info records
    the valuation price in PR is used only to effect a release, if any
    regards
    Rajat

  • Removal of batch management indicator from material master

    I had removed all batch stock from material code but when trying to remove batch management indicator from material master system is giving the message "batches already exist"
    Please suggest the solution.

    Hi,
       The material is NEW and Batch Managed.  No stocks, orders, batches are existing.
       If the Batch Management indicator is removed in Material Master, is there any way *to see/track the batch/lot * of the product.
    Scenarios: Material is NOT Batch Managed
    1.     How to track a batch received for Purchase order.
    2.     How to track a Batch created in a Production order.
    3.     How to track a Batch in Sales Order.
    Thanks,
    VB

  • Standard price comes from material master

    Dear All
    How to get Material master standard  price into purchase order instead of Purchase Info record.without creation P.R
    best regrads
    R.T

    Hi,
    That can be possible.. Pl go throgh the below process..
    IMG- MM- Purchasing - Conditions- Define price determination process-
    Define condition type- Select ur condition type(PBXX or PB00)- In condition there is option "Cond.Category"  here put T or S.
    Then create PO system automaticaly pick ur MAV or standard price from Material master.
    Arun

Maybe you are looking for