How to cancel task which are in Queue state in SCOM console?
Hi All,
When I start any task it does not execute. It show task is in queue state. How can I cancel or execute this task?
Thanks
To cancel Task, you can use following steps:
In the Monitoring workspace, expand Operations Manager and then expand
Agent Details.
Click Agent Health State.
In Agent State, click an agent.
In the Tasks pane, click Flush Health Service State and Cache.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Similar Messages
-
How to remove the tasks which are not manually recoverable?
How to remove the tasks which are not manually recoverable?
I tried performing manual recovery for the BPEL processes but there are few tasks which cant be manually recoverable..
Could you please tell me how to remove those tasks and also tell me which information in the console is the task_id in the database?This article explains how to cleanup bpel process instances, you can find task instance id by searching for data in payload using api.
Managing a BPEL Production Environment
http://www.oracle.com/technology/pub/articles/bpel_cookbook/blanvalet.html
Cheers,
Rad -
How the system know which are Inventory cubes?while compres in ProcessChain
Hi,Experts
When I create a Cube compress in ProcessChain ,under the page there is a checkbox called No Maker for Inventory Cube,and I also know the Non-cumulative key figure can not be compress,
My question is how the system know which are Inventory cubes? and many cube create from ourself.Hi,
I think,
- in the sap tables there are no information.
- the program reads the infocube definition and check: is there a non-***. value?
Sven -
everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?
everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?
-
How to Cancel Delivery which is created in VL04
The user has created the Delivery in VL04.
Plz guide me on How to Cancel Delivery which is created in VL04 ?
I followed VL09 & VL02 process,
but at VL09 it states that PU Withdrawn Qty. exceeded.
At VL02 it only shows the Display Mode.HI,
I also think you can delete the delivery even if its created from VL04.
Try using VL09N for reversal and then delete the delivery by VL02N.
Let us know.
Regards,
SB -
How to get services which are running currently
How to get services which are running currently in the system by a java program. And also how to write a service so that i can start/stop the service from the control panel -> services.
triple post
http://forum.java.sun.com/thread.jsp?forum=31&thread=364090&start=0&range=15#1532232
http://forum.java.sun.com/thread.jsp?forum=31&thread=364088&tstart=0&trange=15 -
How to trigger tasks which created during Event was inactive in WORKFLOW
Hello Experts
We have a custom application with L+1 approval required for approval using workflow.
There was a publish for a nomination for team , Team has logged in registered for the published training.
Unfortunately, all my team mebers 5 of 7 were already applied for nomination.
The team was waiting for my approval, Finally we discovered - The tasks got deactivated;
We discovered that The Triggering Events that are deactivated
Txn --> PFTC_DIS
...............Task Type : Selected ( Workflow Template)
...............Task : 9N000NNN
...............Click : Display
...............Click : TAB : Triggering Events
..........................Found here ...The Tasks are deactivated ....................
To activate "deactivated Events
Txn --> SE37
.................Function Module : SWE_EVENT_REC_TYPE_ENABLE
................Hit : Execute
Filled in Screen ; CLINET : NNN
OBHTYPE : ABCD ( What i have seen in Triggering Events Tab)
RECTYPE : WS9N000NNN
EVENT : EVENTNAME ( What i have seen in Triggering Events Tab)
................Hit : Execute
Once i do & if i check again in PFTC_DIS it is showing green & Event got activated
after event is active
The other 2 Members later raised & had come approval.
...as it is custom application we are storing who registered for it.
Now I see the other 5 members entries in my table
How can create Tasks to flow these workflow task for my approval which were created during event was inactive
may slightly confusing, I am also early bird on WORKFLOW.
if any one give a clue will be greatful
Rgds
PRHello Srinivas !
You've stated as follows :
How can create Tasks to flow these workflow task for my approval which were created during event was inactive.
Hope you wanted to state that users have registered nomination when the event was inactive( and thus workflow didn't get triggered) and now you want those nominations should be routed via workflow.
The solution is to use SWUE transaction and re-create the event.In doing so, please be noted that the time at when nomination was registered(when the event was inactive) and time at when workflow triggered from SWUE would be too different.So, discuss with your team before doing so.
Regards,
S.Suresh. -
How to find documents which are not linked to a project?
Hi all,
i'm just looking for a variant to search for documents which are not linked to a project within ta SOLAR_EVAL.
I need a way to report how much documents are not linked to a project; just stored in KW.
Can anyone give a hint?
Thanks a lot!
JanHi Jan,
This report SOLMAN_UNUSED_DOCUMENTS will help you identify the documents which are not linked to the project.
(OR) Use Tcode: SI80 to find any document in SAP Solution Manager KW.
Regards,
Sanjai -
I'm trying to clean up my iTunes account and I see several of the same phone or computer listed as authorized users. How do I figure out which are the correct phones/computers?
Alvin777 wrote:
Hi. I'd like to delete the Snow Leopard Snapshots in my Time Machine backup drive because it won't work with Lion
I'm not sure what you mean . . . what won't work with Lion? It sounds like it did do some backups.
Is there a way or an app to know which are Lion snapshots?
There is a way, but it's rather cumbersome. You have to start selecting a full system restore; there's a window showing all of the backups and the version of OSX.
Is there an app I could use to manage the snapshots if manually deleting them will cause problems and side effects later.
It's best to use the Time Machine "Star Wars" display to delete backups, but you really shouldn't have to. Let's figure out what's wrong first. -
Safari how do i know which are my open Safari tabs in several windows?
Hi and good day,
It happens frequently that I have several windows open in Safari and in Chrome.
… and with a few tabs windows each.
My question:
How can I find a specific open page, which is somewhere on a tabbed window beneath other windows?
Is there an app to help?
It’s easier of course no problem with 'non-tabbed' windows, as the title will be displayed by the browser.
Hope this makes sense, and it is not unimportant for the workflow :-)
with best regards,
Omar K N
Stockholm, SwedenAlvin777 wrote:
Hi. I'd like to delete the Snow Leopard Snapshots in my Time Machine backup drive because it won't work with Lion
I'm not sure what you mean . . . what won't work with Lion? It sounds like it did do some backups.
Is there a way or an app to know which are Lion snapshots?
There is a way, but it's rather cumbersome. You have to start selecting a full system restore; there's a window showing all of the backups and the version of OSX.
Is there an app I could use to manage the snapshots if manually deleting them will cause problems and side effects later.
It's best to use the Time Machine "Star Wars" display to delete backups, but you really shouldn't have to. Let's figure out what's wrong first. -
How to track beans which are destroyed, but no exception log?
According to the WLS console, we have two out of about 30 entity beans
which have instances which are being destroyed. However, I cannot find
the exception which is causing them to be destroyed. I see nothing in
the WLS logs, nothing in our own logs, nothing, nothing, nothing.
I am wondering if this might be because for those two beans, there are
finder methods which are being invoked, and which may not find anything,
in which case the exception is caught and processing continues
appropriately. Is this a scenario where a bean instance might be created
and then destroyed?
Any ideas on how I can determine why these beans on being destroyed, if
the above scenario does not apply?
Thanks!Well, there are only 2 paths to 'does not exist' in the spec.
unsetEntityContext or system exception. If unsetEntityContext isn't being
called, then it must be a system exception. If that isn't being logged, the
container isn't obeying the spec. If a FinderException is causing the
destruction of the instance, that isn't spec compliant, either. A
reproducible test case and a support call may be your best course of action.
Bill
"Jay Schmidgall" <no@spam> wrote in message news:41dd5bd9$1@mail...
Well, I put logging in the unsetEntityContext method and it is
apparently not being called; max-beans-in-cache is not explicity set, so
it defaults to 1000, I believe, and the console tells me the cached
beans current count is under 50 for both.
On the other hand, the scenario I suggested does seem to cooincide well
with the destroyed count; that is, after the bean is not found by the
finder, the destroyed count goes up. From your description, that seems
like it is just coincidence, but it is definitely there.
bill kemp wrote:
Finder methods are called on a pooled instance of the bean. If the
finder
doesn't find the entity, a FinderException(which is just an application
exception) should be thrown, which is reported to the client, but the
instance is not destroyed. If a system exception is thrown, thecontainer is
supposed to log it before it destroys the instance. The only other pathto
destruction in the state diagram is when the bean goes from 'pooled' to
'does not exist' when the container calls the unsetEntityContext method.So,
maybe put some output code in the unsetEntityContext method to see ifthe
container is removing beans because of cache size considerations. Just a
guess. Do you have <max-beans-in-cache> set to anything in particular? -
DB Tool List Table: How to access tables which are in different SQL database ?
Hi, All,
I'm working on a database application (SQL server) and is evaluating the NI DB Tool kit for this project.
One of the requirement is that I need to access tables which are in two different database
(say Table A in DB 1 and Table B in DB 2).
Our IT guys has linked Table A in DB1 to DB 2 and I verfied this when I use the SQL server managment studio.
When DB 2 tables are populated, Table A from DB1 is also there. I can also do the same thing using MS Access.
Table A in DB1 is avalaible to me enven though I only connect to DB 2.
Here comes the problem.
When I use DB Tool List Table.vi to access DB2, it does NOT list Table A in DB1. It only list the tables in
the database (DB2) which I make connection to (using DB Tool Open Connection.vi with a file DSN)
So my work around right now is to open two seperate connection to DB1 and DB2. However, this approach
obviously creates a problem when I have to access seperate database constantly in my application.
What would be a solution to this ? I've search the forum but only see one post that's somewhat related to
my question. (And it was posted on 2004) Perhaps I need to alter the code in the orignial VI (DB Tool List Table.vi)??
My IT guy told me he has not encountered this scenario since he writes codes in other enviroment such as
VB and others, and he's always been successful by linking tables to different database.
I hope my question is sound and clear since I really don't know much about database terminology.
Any comment/suggestion is much appreciated !!!
Thanks
Chad
Solved!
Go to Solution.To josborne:
To answer your question:
- Are the two databases contained on the same SQL Server instance?
Or are the databases on separate instances? I assume they are on
separate servers, otherwise this wouldn't really be an issue. But its
good to know because it will affect how you build your SQL statements.
Yes they are on separate instances.
- Ask your IT people specifically how they "linked Table A in DB1 to
DB 2". I assume they used "linked servers".
Maybe I used the wrong terminology "linked." They created a "View of Table A (DB1)" in DB2 using the management studio.
Here is a screen shot of that. As you can see, dbo.VISUAL_WORK_ORDER is seen under LABVIEW database in the management studio.
I also see the same table when I make connection to database using MS Access.
Could you elaborate on "configure your SQL statement correctly" =) ? The purpose of using LabView's took kit is so that I can do
minimum SQL statements. Are you talking about modifying LabView's native VI (DB Tool List Table.vi) ?
Thanks for the information. SQL is just something new to me. -
How to monitor targets which are controlled by LOAD BALANCING mechanism
Hi,
I have installed Enterprise Manager 10.1.0.3 and upgraded it to 10.1.0.5. Then i have applied the Application plug-in patch for managing Oracle Applications.In my environment, we have two concurrent managers and four forms servers which are using Load Balancer.Please let me how to manage these concurrent managers and forms servers in that scenario.Would highly appreciate your suggestions regarding the same.Thanks in advance.
Regards,
Vamsi ManyamThis note shows how to configure OEM behind a load balancer.
The question was how to use OEM, not behind a load balancer, to monitor other targets which are behind one or different load balancers.
For example, to monitor :
Forms on server A and B behind load balancer LB1.
Forms on server C and D behind load balancer LB1.
Forms on server E and F behind load balancer LB2.
Gary -
How to findout rows which are not null ?
Hi friends,
Can anyone tell me how to find out the no of rows which is having full data in each column (not null) ?
Ex:- TEST_TABLE having 1000 columns and lakes of rows.
myQuestion:- I need to find the no of rows which are filled with 1000 columns filled with not null data.
Thanks in Advacne.
Kishore.Hello
You're just going to have to write the query with IS NOT NULL on each column. This will help generate the predicates for the WHERE clause to save quite a bit of typing...
SELECT
' AND '||column_name||' IS NOT NULL'
FROM
all_tab_columns
WHERE
table_name = 'TEST_TABLE'You can take the output and add that to
SELECT COUNT(*) FROM test_table WHERE 1=1 HTH
David -
How to find aggregates which are not used.
Hi ,
There are lot of aggregates in my system , so i should deactivate the aggregates which are not used from long back. so how to find out all those , can u plz guide me ,You can also check the usage column of the aggregates. If usage value is high then the aggregate is used very frequently.
If there is no value at the last used then the aggreagete is not used at all.
Hope it helps
Regards
Sadeesh
Maybe you are looking for
-
Can not login to Oracle Application Express after upgrade to 3.2
I installed oracle database express and then I upgrade APEX to 3.2 on it. I got the login page but I can not login by using any account, like SYS, SYSTEM. From the document, internal ADMIN account should exist but I did not see it from dba_users tabl
-
I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surface
-
What is the purpose of short dump error report generated by the system? What r the major parts/section of this report?
-
What is the difference aside from size between the 15 and 17 inch MBP
im trying to decide which one to get. money is not the issue here. I do need to carry on the laptop in my camera bag worldwide. I want the fastest most adept laptop. Photoshop ( when they offer the new version ) and garageband must run very smoothly.
-
My call register is not working
Y is my call register not working at all