How to cancel the connection with my HK BDS?

Apperently my Harman Kardon BDS wants to connett my MackBook almost 30 times an hour. This is very anoying and I want to cancel this. Please help!!

Your iPhone 4 should already be internet ready and you shouldn't need a dongle to use the phone. Depending on who you have your service with this is how they make there money by you using the Internet.. If I may suggest lookinto one of the plans that offers UNLIMITED Call, Text, Data, and everything else the phone is capable of for under $50.00 American there are several out there that offer this plan. T Mobile, Net10 just to name a couple. If your intent is to use a phone that has the capability but is not set up it is cheaper and less headaches in other ways.

Similar Messages

How to resotre the connection with source sys

hello friends ,
need some help.
COuld you please let me know how to retore the connection with R/3 system ?
Unfortunately the R/3 systems are refreshed and connection has to be restore now with BW . As Here i do not have basis person in team , could you please let me know how to do this ?
Thanks in advance
Regards
Manoj

hai jain,
first of all check out the connection is exit with r/3 system. select your r/3 systemselect customizing for extractorsif the connection is available it will lead to r/3 system. it will ask user id and password for that system. other wise select the r/3 s.s--select check.
if you want to restoreselect the source(r/3)right click itselect restore.
hope this help you
regards
harikrishna N

How to get the connection with PM in sequencefactory?

In SequenceFactory interface the following method
public long getNext(Class cls, Connector connector)
is to get the next sequence number, and one can use the connector to get a
new connection, but at most time, when the kodo call this method, there
must a PM exist, so if I want to use the connection with the exist PM, not
a new connection, how can I get to it!

Maguohai-
You can't do this with datastore identity, but you could use application
identity, and have the id assigned wherever use want, using SQL executed
via a Connection obtained in the way described at:
http://docs.solarmetric.com/manual.html#feature_sql_connection_access
In article <bc0n3c$n9l$[email protected]>, maguohai wrote:
Yes, you are right, but if generate the sequence need not transaction(for
example using DBMS SEQUENCE OBJECT to get the sequence), and I don't want
one application contains two connection at the same time. Is the any way I
can do?
Marc Prud'hommeaux wrote:
Maguohai-
The SequenceFactory implementation should use a second Connection in order
to manipulate sequence numbers, since the transactional boundry for
the sequence increment should not be bound to the transactional boundry of
the PersistenceManager.
In article <bbu83a$knd$[email protected]>, maguohai wrote:
In SequenceFactory interface the following method
public long getNext(Class cls, Connector connector)
is to get the next sequence number, and one can use the connector to get a
new connection, but at most time, when the kodo call this method, there
must a PM exist, so if I want to use the connection with the exist PM, not
a new connection, how can I get to it!
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com

How to get the connection with timeserver

Hi I displayed time(GMT) in my program with Date class, but it gives local time. But I need the UTC/GMT time.
Date date=new Date();Is there any way to get GMT?
And I have Internet connection......

Date date = new Date();
DateFormat df = DateFormat.getInstance();
System.out.println(df.format(date));
df.setTimeZone(TimeZone.getTimeZone("GMT"));
System.out.println(df.format(date));~

How to change a connection with the database in Runtime?

How to change a connection with the database in Runtime?
My connection was made using ADF Business component (ApplicationModule).
ADF Swing.
JDeveloper Studio 11.1.1.4.0.

When deploying ADF applications with database connection, you should be using JDBC data sources configured in the weblogic server.
You could change the JDBC data sources to a different DB instance or location - by changing the JDBC data source and restarting the weblogic server.
For more details, check
http://techiecook.wordpress.com/2010/12/02/oracle-weblogic-adf-datasources/
Thanks,
Navaneeth

I preordered the new one direction album and I ment to preorder the one with 18 songs and it preordered both of the albums and I don't know how to cancel the one can someone help me?

I preordered a album then preordered the Same one and I don't know how to cancel the one I preordered that I didn't mean too and it's charging me for both and I don't have a lot of money on my iTunes

Go to the iTunes Store. Click on your Apple ID and enter your password. Scroll down towards the end of the page, you should see a line item that says Pre-Order. You can cancel the pre-order there.

"The connection with the server was reset" Error Message

I am trying to download iTunes 8 for my new iPod that i got today.
However, when i am downloading the iTunesSetup.exe file, the file downloads normally until it gets to about 10.5MB.
After this a message pops up saying:
"Internet Explorer cannot download iTunesSetup.exe from appldnld.apple.com.edgesuite.net.
The connection with the server was reset"
Has anyone else had this problem, if yes how do i resolve it???
Thanks in advance for any help!

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

How to cancel the event in Item Adding and display javascript message and prevent the page from redirecting to the SharePoint Error Page?

How to cancel the event in Item Adding without going to the SharePoint Error Page?
Prevent duplicate item in a SharePoint List
The following Event Handler code will prevent users from creating duplicate value in "Title" field.
ItemAdding Event Handler
public override void ItemAdding(SPItemEventProperties properties)
base.ItemAdding(properties);
if (properties.ListTitle.Equals("My List"))
try
using(SPSite thisSite = new SPSite(properties.WebUrl))
SPWeb thisWeb = thisSite.OpenWeb();
SPList list = thisWeb.Lists[properties.ListId];
SPQuery query = new SPQuery();
query.Query = @"<Where><Eq><FieldRef Name='Title' /><Value Type='Text'>" + properties.AfterProperties["Title"] + "</Value></Eq></Where>";
SPListItemCollection listItem = list.GetItems(query);
if (listItem.Count > 0)
properties.Cancel = true;
properties.ErrorMessage = "Item with this Name already exists. Please create a unique Name.";
catch (Exception ex)
PortalLog.LogString("Error occured in event ItemAdding(SPItemEventProperties properties)() @ AAA.BBB.PreventDuplicateItem class. Exception Message:" + ex.Message.ToString());
throw new SPException("An error occured while processing the My List Feature. Please contact your Portal Administrator");
Feature.xml
<?xml version="1.0" encoding="utf-8"?>
<Feature Id="1c2100ca-bad5-41f5-9707-7bf4edc08383"
Title="Prevents Duplicate Item"
Description="Prevents duplicate Name in the "My List" List"
Version="12.0.0.0"
Hidden="FALSE"
Scope="Web"
DefaultResourceFile="core"
xmlns="http://schemas.microsoft.com/sharepoint/">
<ElementManifests>
<ElementManifest Location="elements.xml"/>
</ElementManifests>
</Feature>
Element.xml
<?xml version="1.0" encoding="utf-8" ?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Receivers ListTemplateId="100">
<Receiver>
<Name>AddingEventHandler</Name>
<Type>ItemAdding</Type>
<SequenceNumber>10000</SequenceNumber>
<Assembly>AAA.BBB, Version=1.0.0.0, Culture=neutral, PublicKeyToken=8003cf0cbff32406</Assembly>
<Class>AAA.BBB.PreventDuplicateItem</Class>
<Data></Data>
<Filter></Filter>
</Receiver>
</Receivers>
</Elements>
Below link explains adding the list events.
http://www.dotnetspark.com/kb/1369-step-by-step-guide-to-list-events-handling.aspx
Reference link:
http://msdn.microsoft.com/en-us/library/ms437502(v=office.12).aspx
http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspx
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

Recommended way for binding the list event handler to the list instance is through feature receivers.
You need to create a feature file like the below sample
<?xmlversion="1.0"encoding="utf-8"?>
<Feature xmlns="http://schemas.microsoft.com/sharepoint/"
Id="{20FF80BB-83D9-41bc-8FFA-E589067AF783}"
Title="Installs MyFeatureReceiver"
Description="Installs MyFeatureReceiver" Hidden="False" Version="1.0.0.0" Scope="Site"
ReceiverClass="ClassLibrary1.MyFeatureReceiver"
ReceiverAssembly="ClassLibrary1, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=6c5894e55cb0f391">
</Feature>For registering/binding the list event handler to the list instance, use the below sample codeusing System;
using Microsoft.SharePoint;
namespace ClassLibrary1
    public class MyFeatureReceiver: SPFeatureReceiver
        public override void FeatureActivated(SPFeatureReceiverProperties properties)
            SPSite siteCollection = properties.Feature.Parent as SPSite;
            SPWeb site = siteCollection.AllWebs["Docs"];
            SPList list = site.Lists["MyList"];
            SPEventReceiverDefinition rd = list.EventReceivers.Add();
            rd.Name = "My Event Receiver";
            rd.Class = "ClassLibrary1.MyListEventReceiver1";
            rd.Assembly = "ClassLibrary1, Version=1.0.0.0, Culture=neutral,
                PublicKeyToken=6c5894e55cb0f391";
            rd.Data = "My Event Receiver data";
            rd.Type = SPEventReceiverType.FieldAdding;
            rd.Update();
        public override void FeatureDeactivating(SPFeatureReceiverProperties properties)
            SPSite sitecollection = properties.Feature.Parent as SPSite;
            SPWeb site = sitecollection.AllWebs["Docs"];
            SPList list = site.Lists["MyList"];
            foreach (SPEventReceiverDefinition rd in list.EventReceivers)
                if (rd.Name == "My Event Receiver")
                    rd.Delete();
        public override void FeatureInstalled(SPFeatureReceiverProperties properties)
        public override void FeatureUninstalling(SPFeatureReceiverProperties properties)
}Reference link: http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspxOther ways of registering the list event handlers to the List instance are through code, stsadm commands and content types.
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

How to keep the connection alive?

Hello! Happy new year!
I have to write an HTTP server that comunicates with many clients in the same time,but keeps the connection with a client open if there the corresponding header is Keep-Alive. I have used threads,and I've tested my program in the following way: I've requested the one page of the site and then I've followed a link from that page. I expected that the broowser and the server talk to the same thread every time,but it seems that they don't. The code I've written is:
//HTTPServer class
ServerSocket serverSocket = null;
        boolean listening = true;
        try {
            serverSocket = new ServerSocket(80);
        } catch (IOException e) {
            System.err.println("Could not listen on port: 80.");
            System.exit(-1);
        while (listening)
              new HTTPMultiServerThread(serverSocket.accept()).start();
//HTTPMultiServerThread
public void run() {
     //     System.out.println(socket.toString());
          try {
while(!serverSocket.isClosed())){
              DataOutputStream out = new DataOutputStream(socket.getOutputStream());
              DataInputStream in = new DataInputStream( socket.getInputStream());
              int nrBytes = in.available();
              if(nrBytes > 0){
                   byte[] bytes = new byte[nrBytes];
                   in.read(bytes);
                   System.out.println("Procesez mesajul:" + nrBytes + new String(bytes));
                   HTTPMessage processedMess = new HTTPMessage(bytes).processMessage();
                   System.out.println("Inchid conexiunea.");
                    log("log.txt", new HTTPMessage(bytes).getStatusLine() + " " + new Data().getCurrentTime());
               //send the message
out.write(processedMess.getBytes(),0,processedMess.getBytes().length);
                   /* inchid conexiunea
              else{
                   String ret = new String("HTTP/1.1 500 Internal Server Error\n");
                    ret += "Host: cristi\n";
                  ret += "Date: " + new Data().getCurrentTime()+"\r\n";
                  ret += "\r\n";
                  ret += "<html><body><p>HTTP/1.1 500 Internal Serve Error</p> </body><html>\r\n";
                  out.write(ret.getBytes());
              out.close();
              in.close();
                   if(new HTTPMessage(bytes).getHeaderValue("Connection").equals("Close"))
              socket.close();
     }//end while
          } catch (IOException e) {
              e.printStackTrace();
    }I would also like to know how many clients are waiting to be served,in order to develop statistics about the server response time. 10X

hi
same to u .
i think what i get from ur code that ....
use some vector at the server side and whenever any client is connected (offcourse first time or not (depend on u !!)) create an object corresponding(generally created by server for every client) ..
save this in the vector .. and pass it the size of vector to the client with the response .
may this help u .
regards
akash
Indiagames Ltd
[email protected]
India

How to determine the connection string to a SQLite database, in C# code

Hello. I'm trying to figure out how to specify the connection string to a SQLite database, I would like to access using the following code:
string connectionString = null;
SqlConnection connection;
SqlCommand command;
SqlDataAdapter adapter = new SqlDataAdapter();
DataSet ds1 = new DataSet();
string sql = "SELECT DataName, Data, Id, UserId, DateLastUpdated FROM MainTable";
connectionString = "Data Source=C:\\SQLITEDATABASES\\SQLITEDB1.sqlite;Version=3;";
connection = new SqlConnection(connectionString);
try
connection.Open();
command = new SqlCommand(sql, connection);
catch
The value I assigned to the variable connectionString, in the code above, I obtained somewhere from the Internet. It does not work. I'm using Visual Studio 2013, against the file sqlite-netFx451-setup-bundle-x86-2013-1.0.96.0.exe, which
I installed, and got from
here.
My application's App.config file looks as follows:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
</configSections>
<connectionStrings>
<add name="DC_Password_Saver.Properties.Settings.DC_Password_SaverConnectionString" connectionString="data source="C:\Users\patmo_000\Documents\Visual Studio 2013\Projects\DC Password Saver\DC Password Saver\DC Password Saver.db"" providerName="System.Data.SQLite.EF6"/>
</connectionStrings>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5.1"/>
</startup>
</configuration>
I tried to use the value assigned to connectionString in the XML settings above, replacing single backslash characters with double backslash characters, because the Visual Studio editor flagged them as unrecognizable, and wound up with the
following.
SqlDataAdapter adapter = new SqlDataAdapter();
DataSet ds1 = new DataSet();
string sql = "SELECT DataName, Data, Id, UserId, DateLastUpdated FROM MainTable";
connectionString = "data source="C:\\Users\\patmo_000\\Documents\\Visual Studio 2013\\Projects\\DC Password Saver\\DC Password Saver\\DC Password Saver.db"";
connection = new SqlConnection(connectionString);
The above code however does not work either. So again, does anyone know how I can specify in C# code, a connection string to access my SQLite database? Thanks in advance for your reply.

What does SQLite connection strings has to do with WPF?
You will find some valid connection strings here:
https://www.connectionstrings.com/sqlite/
But you cannot use the SqlConnection class to connect to a SQLite database. You will need to download and add a reference to the System.Data.SQLite library and then use the SQLiteConnection class:
connection = new System.Data.SQLite.SQLiteConnection(connectionString);
try
connection.Open();
command = new System.Data.SQLite.SQLiteCommand(sql, connection);
catch
Please refer to the following article for more information and an example of how to connect and read and write data from an SQLite database using C#:
http://blog.tigrangasparian.com/2012/02/09/getting-started-with-sqlite-in-c-part-one/.
There is contains a link where you can download the required assemblies.
Hope that helps.
Please remember to mark helpful posts as answer to close your threads and then start a new thread in an approproate forum if you have a new question.

How to test the connection between DSD backend and DSD connector

Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??

Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK.

How to give the connectivity

Hi,
i want to know how to give the connectivity
from mat. doc. no.(MBLNR) to sales invoice no(VBELN).
CAN ANYONE GIVE ME THE FLOW OF THAT
Thanks

Hi
You can MSEG-VBELN with VBAK-VBELN
Regards
Shiva

Java.sql.SQLException: Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor

Good Day,
I'm encountering this problem
     java.sql.SQLException: Listener refused the connection with the following error:
     ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
here's the java code
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
String url = "jdbc:oracle:thin:@//10.143.85.21/UCSL";
String userName = "mssoriano";
String passWord = "mssoriano_4319";
conn = DriverManager.getConnection(url, userName, passWord);
and here's my tnsnames.ora
UCSL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.143.85.21)(PORT = 1521))
    (CONNECT_DATA =
      (SID = psusldb11)
Please do let me know if what may the cause of the problem and how to solve this. Thank you and God bless.

Hi,
see this example
Connect to Oracle DB via JDBC driver
Frank

How to Troubleshoot the Connection Pool Exception?

Dear Oracle Gurus, very good afternoon to you.
I'm looking forward for some tips/troubleshoting guide to escape from the below exception, that occres very frequently to one of application that 100+ users will login from different locations & work on and update the data and save their work, where all in sudden they can't acces the application and it gets down.
Most of the times in the server log I observed below.
weblogic.jdbc.extensions.PoolLimitSQLException: weblogic.common.resourcepool.ResourceLimitException: No resources currently available in pool RemoteDesktop.main to allocate to applications, please increase the size of the pool and retry..
Please help me on, how to overcome this kind of exception.
In Weblogi c server I see below kind of Warnings.
If you set the buffer size to zero in a servlet, it would fail to respond and would initiate an infinite loop in the server. WebLogic Server would ultimately display a Errors:
ExecuteThread: '157' for queue: 'weblogic.kernel.Default' has been busy for "633" seconds working on the request "Http Request: : ../updates/process_manager.jsp", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.
I searched over google for this kind of error, See otherusers posted the same kind of errors but didn't have any positive replies to troubleshoot this issue.
I also got Oracle Dev link on Weblogic version upgrade product where they fixed similar kind of error it seems. Which is shown below.
http://docs.oracle.com/cd/E13222_01/wls/docs61/notes/bugfixes2.html -- BUG # CR106186
details:
"Suspend Checker Thread" prio=10 tid=0x23eb90 nid=0xfec runnable
<May 14, 2003 10:53:34 AM PDT> <Warning> <WebLogicServer> <000337>
<ExecuteThread: '10' for queue: 'default' has been busy for "1,181" seconds working on the request "Http Request: servlet_uri", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
This problem was solved with a code fix.
Looking forward for some help, Thank you inadvance.
FYI..
I'm using oracle thin driver JDBC connection/Weblogic 8.1
Edited by: user1072948 on Apr 26, 2012 11:55 AM

I agree that looking into the number of connections that you have open when you see
weblogic.jdbc.extensions.PoolLimitSQLException: weblogic.common.resourcepool.ResourceLimitException: No resources currently available in pool RemoteDesktop.main to allocate to applications, please increase the size of the pool and retry..
would be a good idea; but I would suggest that you don't increase without thinking about the consequences. I would look more closely at what the connections to the database are doing, for instance, how long are the connection being left open for? What are the queries that are being run? Should you expect to see all the connections in the connection pool being used? What is the current connection pool limit? Are you simply going to increase the number of connections to find that they are also waiting? What is the load on the database at the time?
It's the other error that you say you see
ExecuteThread: '157' for queue: 'weblogic.kernel.Default' has been busy for "633" seconds working on the request "Http Request: : ../updates/process_manager.jsp", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.
What does this JSP do? Why would this be busy for so long? Is it related to the previous exception that you have? I'd ask you delevelopment team to look into this.
In short, it sounds like you have load issues on your server(s) and a careful tuning of the system after a full analysis (thread dumps, heap profiling, connection pool monitoring and code review) would probably be beneficial. It may be that restricting the thread pool may help, it may be that increasing the connection pool would help. I'd not plump for a quick fix here.

How to extend the range with a second Airport Express? Do I need a DSL cable?

How to extend the range with a second Airport Express? Do I need a DSL cable?

Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance. But, wireless might work OK for you if you want to try that.
Let us know "how" you want to extend......wireless or wired?

How to cancel the connection with my HK BDS?

Similar Messages

Maybe you are looking for