How to cancel the incoming excise invoice by j1ih

Hi,
After reversing Excise Part1 entry (Mvmt 102 by Migo)
how we have to cancel the part2 by J1ih (by which tab "other adj" or "Cancel Excise Inv")
as per my knowaledge cancel excise invoice is outgoing excise invoice cancel,'
is it correct?
and above all
these entries will not appear in J2i9 (Monthly return) then we cannot show updated entries.
please tell me.
Thanks
Prasad

1. First cancel the GR.
2. Cancel the Part 1 entry.
3. In J1iex - > Change, you need to maintain reason for cancellation in header misc tab. For this you may need to do config in Tax on Goods Movements -> India -> Business Transactions -> Incoming Excise Invoices -> Maintain Rejection Codes. Save the invoice in j1iex.
4. In j1iex -> Post , you can now post the invoice. Simulate to see that accounting entries are reversed.
5. Then in j1iex -> Cancel, cancel the invoice to mark the status as 'Cancelled' if you need to use the invoice number and date again for another GR.
Regards
Hemant

Similar Messages

How do we raise Incoming Excise invoice on Vendor1 and A/P Invoice on Vendo

Hi All,
How do we raise Incoming Excise invoice on Vendor1 and A/P Invoice on Vendor2 for a single purchase order?
The Scenario: PO is raised on Vendor2 for certain goods excisable and Vendor2 is not registered under Excise hence i cannot get Incoming excise invoice from Vendor2 or I cannot raise Excise invoice in B1 on the name of Vendor2.
But
the same goods (which are excisable) were already supplied by Vendor1 to Vendor2. So here the excise invoice is coming from Vendor1 and A/P Invoice from Vendor2 how this is actually handled in Business One? How do we show the A/P Invoice amount due on Vendor2 and the Excise Passed from Vendor1?
Thanks
SV Reddy

Hi Thanga Raj,
what you said is works only for payment consolidation. where in a particular purchase two vendors are involved, the tax updates should go into relevant vendor master data. in the above case excise is updated in the vendor1 account and RG23 also should be generated on the name of Vendor1.
Since you already raising incoming excise invoice on the name of Vendor1 you also need to raise A/P Invoice on Vendor1 (this is mandatory, from the goods receipt PO when you click copy to Incoming Excise Invoice and A/P Invoice the system automatically inserts "Vendor1")
but how do you update the Vendor2 account only for the A/P Invoice VAT portion. Because in reality the VAT you are paying to Vendor2 since you need to raise the a/P Invoice on the name of Vendor2. it is not actually happening in business one. If you try to raise A/P Invoice on Vendor2 from this Goods Receipt PO, initially the system copies Vendor1 from GRPO and if you change and try to add the invoice on Vendor2 name, the system will ask you to create a serial number again if the item is excisable. here the work is duplicated for the same item you already created a serial number while you creating the Goods Rectipt PO from Vendor1.
Any body knows any other scenario please help me.
Thanks
SV Reddy

Cancellation of Incoming Excise Invoice at Depot

Hi Experts,
We have created a MIGO against PO and excise invoice is created alongwith MIGO. Hence RG23D register is updated. For some reason we have reversed the MIGO. But quantity is still lying in RG23D register however we have no stock of that item.
Is there any way to reverse the incoming excise invoice so that quantity can be reomved from RG23D register.
Waiting for your precious reply!!!
Kuldeep Dahiya

Hi Santosh,
Thanks 4 ur reply. But when I am trying to cancel by entering the material doc, it is showing error "material doc .... not found".
Plz reply some other way or solution of this problem.

Problem in Passing on the Incoming Excise Invoice Amount

Dear All,
          My client is a manufacturer but he is purchasing the rawmaterial from the Trader.
          Now within the G R PO he enters the Qty , Unit Price of the Trader and the Accessable Value of the Product. The same he copies it to the Incoming Excise Invoice and then copies the same to the A/P Invoice.
   Item no.   Qty      Price     Accessable Value      Total        TaxCode            Tax Amt
       M1      2160    53.00          45.11                   114480     BED+ VAT        18630
       The Breakup of Tax Amt is as below.
                                             BED   14% on 97437.60 ( 45.11 * 2160) = 13641
                                             Ecess 2% on 13641 = 273
                                             HSCess 1% on 13641 = 136
                                             VAT 4% on 114480 ( 53 * 2160) = 4580
                                   Hence Tax Amt Total = 13641 + 273 + 136 + 4580 = 18630
Above is the Scenario which is done in SAP B1.
        But my Clients requirement is he does not want to post the BED Amount to the Trader as the Trader has just passed the Excise Amount from the Manufacturer to my Client.
       Hence Following Posting in G/L Accounts is done in SAP B1
                       Vendor ( Trader )                           133110 [ 114480 + 18630(Tax) ]
                        VAT 4% (Receivable)                    . 4579
                        BED 14% Incoming                          13641
                        Ecess 2% Incoming                          273
                        HSCess 1% Incoming                        136
                        Stock                                               114480
           Now my Client requires that the BED Amount should not be added to the Vendor bill i.e he wants the Vendor to be cr. by only (114480 + 4579) = 119060 and the BED amt of 14050 should not be accounted to the Vendor.
           Please guide me to solve this problem. As this problem is regarding Passing of the MODVAT.
Regards
Hitesh Parsawala
Edited by: Hitesh Parsawala on Nov 15, 2008 8:34 AM

Hi Hitesh,
You mean to say, you don't even want to debit your accounts for Excise?
In this case, you have to click orange arrow of Tax Amount. You can manually put the tax amount, you want. So, just make the excise i.e. BED , ECess & SHECess tax amount to zero.
Hope this will help you in your issue.
Regards,
Abhishek

How to Cancel same numbered outgoing Invoices through J1IH?

Hi Friends,
There are 2 Invoices created with the same numbers -
one for Domestic and the Second for Export,
For Cancelling the Export Excise Invoice I am using J1IH, problem is the first number i.e. the domestic number is being picked and I am not being able to delete the required one which comes as Second - inspite of taking the Internal Document Number.
Require Help
Andy

1. First cancel the GR.
2. Cancel the Part 1 entry.
3. In J1iex - > Change, you need to maintain reason for cancellation in header misc tab. For this you may need to do config in Tax on Goods Movements -> India -> Business Transactions -> Incoming Excise Invoices -> Maintain Rejection Codes. Save the invoice in j1iex.
4. In j1iex -> Post , you can now post the invoice. Simulate to see that accounting entries are reversed.
5. Then in j1iex -> Cancel, cancel the invoice to mark the status as 'Cancelled' if you need to use the invoice number and date again for another GR.
Regards
Hemant

Cancellation of posted excise invoice

Dear All,
How to cancel posted incoming excise invoice without cancelling the GRN.
User had posted the excise invoice wrogly so now they want to cancel that. For this we have to first reverse GRN but stock also get consumed meanwhile so system is not allowing to reverse GRN. How to resolve this?
Manoj

Dear All,
We can cancel the posted excise invoice for purchase also.
But for that we have to first revers the GRN.
Now in out case it is not possible to revers the GRN.
How to solve this?
Manoj

Incoming Excise Invoice - Print Layout Design

Dear all,
        How to prepare the Incoming Excise Invoice Print Layout Design.
        That Excise is Dealers Invoice.
        For Ex: 'X' is the one material , this has defined in material master as Inventory , Purchase and Sales item and its Excisable material.
       Ths 'X' material purchase from the vendor and selling to the customer.
       At the time sales for incoming excise invoice, in that invoice should include the what is purchases of that material and what is sales?
     This information how to bring the Print Layout Design at Incoming Excise Invoice.
         Please guide to me
Warm Regards,
K.Prasad,
+919921525560.

At first you have to check the Excisable in Item master for doing excise transactions.
Incoming Excise Invoice can be generated after doing Goods Receipt Transactions.
From Copy to Option Goto >> Incoming Excise Invoice >> the invoice form will be opened
From here you can select the PLD icon and design the layout you need.
come back here if any queries

How to get incoming excise invoice in J1IIN

Daer All
Greetings!!
Scenario: The company receives raw material from vendor and then vendor send excise invoice to company.
The same raw material then sell to other vendor but the incoming excise invoice is used to pass on duty . with threference to that incoming excise invoice duty pass on to this vendor to whom raw material has been sold
Question: How the process will be captured in SAP from MM to SD
1) now how i will create order > delivery >billing and how i will be able to get that incoming excise invoice in j1iin ?
2) What About Pricing Procedure?
I have searched the forum and i have also tried on the existing solution given in forum but still could not do it
I am still putting my effort but in need of valuable input from forum

hi
sales side proces
va01-vl01n-vf01-j1iin
j1id settings for this material and chapter id material is raw material u can assign the raw material , other wise assign finished goods, and excise duties main in customer and vendor also , in sale order process you can maintain the excise duties in sale order, based on invoice , capture the j1iin it is for only out going invoice ,
vendor details maintain at migo only , ofter migo you can capture incoming excise invoice , incoming excise invoice at j1ig only,
in j1ig u capture the it is for only depo
Menu Path: User menu à Indirect taxes à Procurement à Excise invoice à Incoming Excise invoice à Individual Processing à Capture/Display (J1IEX)
a.     Select Post Excise Invoice and Vendor in windows above the Header.
b.    Enter Goods Receipt Document number generated in STEP 2 and press ENTER or Click on Execute   button.
c.     Following screen will appear as shown below.
Menu Path: Logistics à Materials Management à Inventory management àGoods movement à goods receipt à for purchase orderà Purchase order no. Known (MIGO)
.     Enter the PO number, Vendors Delivery Challan Number
b.    Press Enter u2013 at this point of time system will copy all the relevant information from PO and a Excise Invoice tab will appear in the Header screen as shown below, select capture Excise Invoice on this tab and check the Excise group.
c.     Enter the Received Quantity in the Quantity tab in field Quantity & Unit of entry.
Follow above procedure for claiming modvat for raw material.
d.    Enter receiving Storage Location in Where tab. Here check the stock type in which material is going to receive. If some text needs to be added regarding the goods receipt enter it in Text field.
Follow above procedure for claiming modvat for raw material.
e.     Check the Excise Details related to the received material in Excise Item tab in Detail Data screen as shown above.
Post the Captured Vendoru2019s Excise Invoice
Go to CIN transaction
Menu Path: User menu à Indirect taxes à Procurement à Excise invoice à Incoming Excise invoice à Individual Processing à Capture/Display (j1iex)
a.     Select Post the Excise Invoice and Goods Receipt in windows above the Header.
b.    Enter Vendor Excise no generated above.
If material had directly came from different vendor, Enter vendor code in Ship from field in miscellaneous tab.
a.     If Excise Invoice is faulty and still want to take the credit for the excise invoice, enter the rejection code.
b.    Check the Material Chapter Heading, Material type in Item tab in Detail Data screen.
c.     Check the Quantity in Quantity tab
d.    Check the Duty rate in Duty rate tab.
e.     Check duty values and Tax amount for the material in Duty value tab.
f.     Check the Part I entries, which are created immediately after the GR in Part I tab.

Cancellation of Depot Excise Invoice

Hi,
User has by mistake cancelled the Depot Invoice, reversed the goods issue for Delivery, Deleted the Delivery and Deleted the Sales order. He missed to cancel the Depot Excise Invoice. Now how to Cancel this Depot Excise invoice. In J1IJ, system is asking for Delivery number, but as the Delivery is deleted, it is not allowing.
Now this Excise invoice has to be cancelled so that the Qty in the Mother invoice will be updated in RG23D.
I tired in J1IH, but system says "Excise modvat accounts not defined for CEIV transaction and excise group". I have checked the Account assignment but it looks fine.
Please Help.
Regards,
Ajit

I have tried as per your suggestion. I have entered the Internal number for the Excise invoice number generated for Delivery at Depot, as the input . System says "This excise invoice has been used for Sales Cannot change".
Please suggest.
Regards,
Ajit

Cancellation of Vendor excise invoice

Dear all
Is it possible to cancel Vendor excise invoice without reversing GR(Only Part 1 posted)? .
If it is possible how we can do ?. Please suggest.
Thanks and regards
Srinivas.

Hi,
Without canceling the Material document number you cann;t cancel the Vendor excise invoice/Internal excise invoice number.
If you cancel the Vendor excise invoice it will voilate the excise data.You need to reverse the GR document then you can cancel the Vendor excise invoice.
rgds
Chidanand

Cancellation & JV of Excise invoice generated through J1IS

Dear Friends,
We have a requirement to cancel the outgoing excise invoice created through the transaction J1IS towards purchase return.
I believe through J1IS, cancellation of the excise invoice is made possible but no accounting document get posted. Only the status is being changed from 'Posted' to 'Cancelled'.
While doing the JV through the Transaction J1IH => Cancell Exc Inv, system is giving error message as follows:
"Excise modvat accounts not defined for CEIV transaction and excise group".
In the customisation, all the relevant GL accounts are found maintained against transaction type CEIV.
For example at the time of outgoing excise invoice posting through J1IS following accounts hit.
13113920     CENVAT clearing     8
13113920     CENVAT clearing     771
13113920     CENVAT clearing     15
13113900     CENVAT Payable     - 8
13113900     CENVAT Payable     - 771
13113900     CENVAT Payable     - 15
We would like to have an opposite entry through the transaction code J1IH => Cancellation of Exc Inv.
Kindly give a suitable solution to make the cancellation.
Thanks.
Harikrishnan.

Hi Hari,
Do the blw option
whenever you are trying to cancel the Excise Invoice generated by J1IS/J1IV , Use J1IH-> Cancel Excise Invoice> you have to give the Official Excise invoice no. which is generated by J1IV for cancellation
and ref the sdn thread with same issue
How to cancel excise invoice which is created through t.code J1is
Cancel J1IS Excise Invoice

Incoming excise invoice posting problem

Dear All,
         When i post the Incoming excise invoice the following error is coming.
          Register Number not defined for the location
           Please guide.
Edited by: Hitesh Parsawala on Oct 23, 2008 12:05 PM

Hi Hitesh,
If you are using SAP B1 2007 - there is an additional facility to give different excise registration no. to different location (warehouse) for one company which is not available in SAP 2005.
Hope this may help in understanding your issue.
Regards,
Abhishek

Credit Note With Out Incoming Excise invoice

Hi guys,
I want to know what are the A/R Credit Memos that still has not been converted intlo Incoming Excise Invoices.
will any body please provide me a query for the same.
I have tried a query for displaying the Incoming Excise Invoices which has credit note as a base document by this query.
SELECT distinct T0.[DocNum], T0.[DocDate], T0.[CardName], T1.[BaseRef] as 'Credit Note No', T1.[BaseType]
FROM OIEI T0 INNER JOIN IEI1 T1 ON T0.DocEntry = T1.DocEntry
WHERE T0.[DocDate] between '[%0]' and '[%1]' and T1.BaseType ='14'
Thanks & Regards,
Vamsi.

You may try:
SELECT distinct T0.[DocNum], T0.[DocDate], T0.[CardName]
FROM dbo.ORIN T0
INNER JOIN dbo.RIN1 T1 ON T0.DocEntry = T1.DocEntry
WHERE T0.[DocDate] between '[%0]' and '[%1]' and T1.TargetType != XXX
You need to replace XXX with the object type for Incoming Excise invoice.
You may check these threads if you don't know the type:
list of object type for sp_transactionnotification
SP_Notification | From where to find the list of Object Type details

Incoming Excise Invoice

Dear Experts,
One of My Clients has the following Scenario:
They have to book AP invoice before getting the Bill Of Material (BOM) - Which consists of Customs Duty details and Other Expense. IN SBO we will not be able to Post AP invoice before putting Incoming excise Invoice. In this Case Incoming Excise Invoice can be posted only after receiving the BOM which will take 30 days but the client wants to BOOK the AP invoice first. While taking GRPO I have asked them not to clicking the Excise button just to avoid the Incoming Excise Invoice. But they want the Duty to be added along with the Item cost which can done only when they receive the BOM, Inventory Revaluation is not Possible because they sell the item as soon as Book it. PLS help with a Solution.
Regards,
AKS

Hi Arvind..........
Here you can do work around to achive your requirement. Once you raised PO, at the time of GRPO first do AP down payment invoice and dont do payment because of which your vendor liability will be created. Then do GRPO and when you receiv the excise gate pass then you punch the incoming invoice as well as AP invoice.
I fyou feel this is correct work around the give me a hint. But before going plz test in demo database. I guess it would help you.
Regards,

Enhancement_CIN_Capture Incoming Excise Invoice-J1IEX bulk data upload

Dear All,
Sub:CIN_Capture Incoming Excise Invoice-J1IEX bulk data upload option requirement
We are capturing the Incoming excise invoices manually in the
transaction J1IEX with huge datau2019s and according to the volume of data
it is very difficult for us to enter manually and now we required for
the option of bulk data processing to upload the data from the Excel
file(received the softcopy from the supplier).
As per our observations we found the BAPI named
BAPI_EXCINV_CREATE_FROMDATA but the update level of this BAPI is not
available in our system because as per the Indian Government norms one
ofthe current Excise Duty Tariff is as below
1. Basic Excise Duty (BED 8%).
2. Education Cess (ECess 2%)
3. Secondary Education Cess (SECess 1%)
and we observed the SECess (1%) is not covered in the above mentioned
BAPI so we are not in a position to proceed further.
So Kindly update us is any other relevant option will solve the purpose.
We are in a quite difficult situation to uplaod the datas to our system
so please do the needful.
Regards,
PrabuM

Please note that CIN uses the 'MB_MIGO_BADI' definition and 'CIN_PLUG_IN_TO_MIGO' is the implementation. You can create multiple implementations of this BADI. The same BADI is used for single step Capture & Post of excise invoice in MIGO. Kindly use this BADI as per your needs. SAP std does not support any BAPIs for Goods Receipts with Excise updates

How to cancel the incoming excise invoice by j1ih

Similar Messages

Maybe you are looking for