How to cancel the lock code N73

I Want cancel  the lock code  my phone is N73
Solved!
Go to Solution.

There is no way to bypass the security code. Think about it - if there was, it would be widely published on the Internet and the whole concept of the security code would be utterly useless.
If you've forgotten your security code then you have two options.
1) Update the phone's firmware if at all possible. Doing this will wipe the phone clean and it should also reset the security code to its default 12345.
or,
2) Take the phone to your nearest Nokia Care Point with proof that you are its owner. The NCP will reset the security code to its default 12345 for you. This process might wipe the phone clean as well and there may be a charge for it.
There is no other way.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • How to cancel screen lock code ?

    I creat the screen when I set the email with exchange mode
    but how to cancel the lock code after I delete this email account
    Post relates to: Pre p100ueu (O2)
    This question was solved.
    View Solution.

    When slected off, did it prompt you for a password/pin to confirm?  Try this:
    1.  Turn it off.
    2.  Close the card and dont do anything else.
    3.  Immediately shut down the phone, hold down power button for the option.
    4.  Turn it back on.
    Does turning screen off and on promp password again still?  If so, the next step will be to partial erase the device by going into device info and tap reset options.

  • How reliable is the "Lock" code?

    If I've set a lock/unlock code and someone steals my Ipod Touch, does this mean that the ONLY thing they'll be able to do is reset the ITouch completely? In other words, is there any way the crook can get to my contacts and email if the ITouch is locked?
    Thanks for any info.
    Rob

    I'm just trying mine now. After five wrong attempts I had to wait a minute to try again. After one further failed attempt I had to wait five minutes, a further wrong attempt and I'm waiting fifteen minutes to try again. 
    5040 would be correct if the numbers could only appear once in the combination: 10x9x8x7.
    cheers
    mrtotes

  • Does the lock code for my iPad covered by my warranty?

    Does the lock code for my iPad covered by my warranty?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to cancel the event in Item Adding and display javascript message and prevent the page from redirecting to the SharePoint Error Page?

    How to cancel the event in Item Adding without going to the SharePoint Error Page?
    Prevent duplicate item in a SharePoint List
    The following Event Handler code will prevent users from creating duplicate value in "Title" field.
    ItemAdding Event Handler
    public override void ItemAdding(SPItemEventProperties properties)
    base.ItemAdding(properties);
    if (properties.ListTitle.Equals("My List"))
    try
    using(SPSite thisSite = new SPSite(properties.WebUrl))
    SPWeb thisWeb = thisSite.OpenWeb();
    SPList list = thisWeb.Lists[properties.ListId];
    SPQuery query = new SPQuery();
    query.Query = @"<Where><Eq><FieldRef Name='Title' /><Value Type='Text'>" + properties.AfterProperties["Title"] + "</Value></Eq></Where>";
    SPListItemCollection listItem = list.GetItems(query);
    if (listItem.Count > 0)
    properties.Cancel = true;
    properties.ErrorMessage = "Item with this Name already exists. Please create a unique Name.";
    catch (Exception ex)
    PortalLog.LogString("Error occured in event ItemAdding(SPItemEventProperties properties)() @ AAA.BBB.PreventDuplicateItem class. Exception Message:" + ex.Message.ToString());
    throw new SPException("An error occured while processing the My List Feature. Please contact your Portal Administrator");
    Feature.xml
    <?xml version="1.0" encoding="utf-8"?>
    <Feature Id="1c2100ca-bad5-41f5-9707-7bf4edc08383"
    Title="Prevents Duplicate Item"
    Description="Prevents duplicate Name in the "My List" List"
    Version="12.0.0.0"
    Hidden="FALSE"
    Scope="Web"
    DefaultResourceFile="core"
    xmlns="http://schemas.microsoft.com/sharepoint/">
    <ElementManifests>
    <ElementManifest Location="elements.xml"/>
    </ElementManifests>
    </Feature>
    Element.xml
    <?xml version="1.0" encoding="utf-8" ?>
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <Receivers ListTemplateId="100">
    <Receiver>
    <Name>AddingEventHandler</Name>
    <Type>ItemAdding</Type>
    <SequenceNumber>10000</SequenceNumber>
    <Assembly>AAA.BBB, Version=1.0.0.0, Culture=neutral, PublicKeyToken=8003cf0cbff32406</Assembly>
    <Class>AAA.BBB.PreventDuplicateItem</Class>
    <Data></Data>
    <Filter></Filter>
    </Receiver>
    </Receivers>
    </Elements>
    Below link explains adding the list events.
    http://www.dotnetspark.com/kb/1369-step-by-step-guide-to-list-events-handling.aspx
    Reference link:
    http://msdn.microsoft.com/en-us/library/ms437502(v=office.12).aspx
    http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspx
    Amalaraja Fernando,
    SharePoint Architect
    Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

    Recommended way for binding the list event handler to the list instance is through feature receivers.
    You need to create a feature file like the below sample
    <?xmlversion="1.0"encoding="utf-8"?>
    <Feature xmlns="http://schemas.microsoft.com/sharepoint/"
    Id="{20FF80BB-83D9-41bc-8FFA-E589067AF783}"
    Title="Installs MyFeatureReceiver"
    Description="Installs MyFeatureReceiver" Hidden="False" Version="1.0.0.0" Scope="Site"
    ReceiverClass="ClassLibrary1.MyFeatureReceiver"
    ReceiverAssembly="ClassLibrary1, Version=1.0.0.0, Culture=neutral,
    PublicKeyToken=6c5894e55cb0f391">
    </Feature>For registering/binding the list event handler to the list instance, use the below sample codeusing System;
    using Microsoft.SharePoint;
    namespace ClassLibrary1
        public class MyFeatureReceiver: SPFeatureReceiver
            public override void FeatureActivated(SPFeatureReceiverProperties properties)
                SPSite siteCollection = properties.Feature.Parent as SPSite;
                SPWeb site = siteCollection.AllWebs["Docs"];
                SPList list = site.Lists["MyList"];
                SPEventReceiverDefinition rd = list.EventReceivers.Add();
                rd.Name = "My Event Receiver";
                rd.Class = "ClassLibrary1.MyListEventReceiver1";
                rd.Assembly = "ClassLibrary1, Version=1.0.0.0, Culture=neutral,
                    PublicKeyToken=6c5894e55cb0f391";
                rd.Data = "My Event Receiver data";
                rd.Type = SPEventReceiverType.FieldAdding;
                rd.Update();
            public override void FeatureDeactivating(SPFeatureReceiverProperties properties)
                SPSite sitecollection = properties.Feature.Parent as SPSite;
                SPWeb site = sitecollection.AllWebs["Docs"];
                SPList list = site.Lists["MyList"];
                foreach (SPEventReceiverDefinition rd in list.EventReceivers)
                    if (rd.Name == "My Event Receiver")
                        rd.Delete();
            public override void FeatureInstalled(SPFeatureReceiverProperties properties)
            public override void FeatureUninstalling(SPFeatureReceiverProperties properties)
    }Reference link: http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspxOther ways of registering the list event handlers to the List instance are through code, stsadm commands and content types.
    Amalaraja Fernando,
    SharePoint Architect
    Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

  • How to cancel the background job?

    Hi,
        I have schedule the backgroud job.How to cancel the background the job.
    When i select the job and click on stop button, iam getting message "job is not active - cancellation not possiable".How to schedule the background job.
    Regards,
    T.suresh

    goto sm37
    SM36 Define Background Job
    SM37 Background Job Overview
    SM39 Job Analysis
    U can Moniter the background Jobs through T code SM37
    In the Simple Job Selection window enter the name of the Job and User of that Job and u can check the status of that Job like “JobName, Job CreatedBy, Status, Start date, Start time Duration(sec.) Delay (sec.).

  • Retrieving the Lock Code

    Hi guyz...
    have a problem with my e71 i forgot my lock code i was trying to reformat my phone but before continuing it is required to enter the lock code i enter it for 2x already
    but it keeps on saying that it is CODE ERROR
    kindly help me at this matter how to retrieve back my lock code
    thanks hope to hear from you soon

    The standard code is 12345, but if you've changed it you're in for a trip to the Nokia service centre with your proof of purchase or proof of ownership.
    There is no 'back door' to the lock code that you can deal with yourself otherwise everybody would know it and the lock code would be utterly useless as a secutiry feature, so the phone has to be re-flashed completely. Be warned that if you don't have a backup on memory card or PC Suite, your data will all be lost.

  • HT201263 how do you reset lock code if you forget it

    how do you reset lock code if you forget it

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Backing up, updating, and restoring iOS software

  • HT201263 If yor phone is lost how do you change lock code from computer?

    If your phone is lost how do you change lock code from computer?

    You cannot remotely change the lock code

  • How to delete the old code in the EXIT_SAPLRSAP_001

    Hi All,
    In R3 system, I wrote an exit for 2LIS_11_VAHDR  by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
    and can we create new project and can we assign to the Enhancement RSAP0001.
    Can anybody suggest me in this
    Thanks in advance......
    Narendra

    Hi Narendra,
    You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
    SE38>zxrsau01>change-->find out your data source
    Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
    If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
    Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
    Hope it helps
    Thanks
    Teja

  • How to use the t-code vf31 tor taking print out of invoice

    Hi,
      How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
    venu

    Hi,
    Please find the steps
    Output type                     RD00
    Transmission medium             1
    Sort order                      01
    Processing mode                 1
    Please give the oppropriate fields,
    if the still error persists  check the configuration in NACE transaction code.
    thanks
    Kuntla

  • Recently I have added a new icloud account for my iphone but now my email is hacked and I cant complete the verification process.How to cancel the verification in my phone?  plsz help me.....

    Hi
    Recentky I have added a new icloud account to my iPhone 5s but my email is now hacked! so I can't complete the verification procedures. How to cancel the current verification process????plszz help me...

    Ah thanks Razmee however there is NO option to delete the iCloud account in settings!

  • I preordered the new one direction album and I ment to preorder the one with 18 songs and it preordered both of the albums and I don't know how to cancel the one can someone help me?

    I preordered a album then preordered the Same one and I don't know how to cancel the one I preordered that I didn't mean too and it's charging me for both and I don't have a lot of money on my iTunes

    Go to the iTunes Store. Click on your Apple ID and enter your password. Scroll down towards the end of the page, you should see a line item that says Pre-Order. You can cancel the pre-order there.

  • How to get the source code of  "com.sap.caf.eu.gp.example.tiimeoff.wd.creat

    Hi Frendz..
    I want to know how we can build a callable obj which have a two buttons those r Accept n Reject accordiing to the actions on these buttons flow should forward to next screen(approver ) r sent back to the sender(screen with reject).
    I gone thru the Leave process(Time-Off process) which is very suitable for my requirment but in this app there r using predefined CO(com.sap.caf.eu.gp.example.tiimeoff.wd.create).How we see the source code of this predefined CO.
    Thanks in Advance
    Regards
    Rajesh

    Hi,
    check [this|Re: Source of Time-off Request Project].
    Regards,
    Naga

  • How to find the source code of com.sap.caf.eu.gp.example.tiimeoff.wd.create

    Hi Frendz..
    I want to know how we can build a callable obj which have a two buttons those  r Accept n Reject accordiing to the actions on these buttons flow should forward to next screen(approver ) r sent back to the sender(screen with reject).
    I gone thru the Leave process(Time-Off process) which is very suitable for my requirment but in this app there r using predefined CO(com.sap.caf.eu.gp.example.tiimeoff.wd.create).How we see the source code of this predefined CO.
    Thanks in Advance
    Regards
    Rajesh

    not answered

Maybe you are looking for