How to cancel the sales order - header and line status are in Entered Stage

Dears,
I have some sales order to be cancelled in which the header and line status are in *"Entered"*. I am not able to cancel these sales order.
Also note that these orders are for maintenance service.Once i book these orders the lines will change to closed status.
So it is not possible to book and cancel the lines.
Kindly me to resolve this.

926530 wrote:
Boss,
If i do Action-->cancel on header, it just makes the qty to zero.But the header and line status still showing as entered.It will not cancel the order.
The problem for me is that these lines are coming in my monthly reports. This is what your question says...be more specific as what is your issue..which in turn is your problem
How to cancel the sales order - header and line status are in Entered Stage
Coming to your Action-->cancel...as far as i know ...the header status will change to canceled..
unless until you have some processing constraints in place...which is stopping you...
HTH
Mahendra

Similar Messages

How to update the sales order header & item data in TM system

Hi Experts,
Greetings!
I need your help,I have a one requirement sales order data came from ECC these sales order data need to update in TM Sales order header table as well as item table also these fields are additional fields.
Can anyone please guide me I am very new in TLM .
Thanks in advance.
Thanks&Regards,
Siva.

Hi Siva
"/SCMTMS/TRQ~ROOT" is for sales order header and "/SCMTMS/TRQ~ITEM" is for details.
I assume you need to
enhance the structures for these nodes to hold your add. fields;
and do the same for the input parameter of service TransportationRequestRequest_In (which is used to create OTR) from PI side;
Pass the add. fields during service call (impelment in ERP system);
Map the fields from service paremeter to node attribute (implement in TM system, BAdI /SCMTMS/TRQ_SE_TPNRQ_REQ~CHANGE_MODIFICATION create modification table for the input parameter).
I cannot find source code for all of that; hope it helps.
Sensen

How to modify the Sales Order Header Text

Hi Experts,
I have bulk of sales orders, for each sales order i have to modify the Header Text,( text id : 0005, text object = VBBK,)
for this, is there any standard BAPI or Function Module is available. If so could you let me know what are the input parameteres i have to pass.
Regards,
Nag..

hello,
there is BAPI "BAPI_SALESORDER_CHANGE"
there is a ORDER_TEXT in a table parameters in the BAPI.
pass all the relevant inputs & use commit bapi
Thanks,
Manjunath MS

To change the Purchase order header and line item text

Hi everybody,
I need to upload the PO Header and item text for the combinaion of PO and a material.
Please help???

Hi,
Try this beloe code
      Length of the PO item text
      If the length > 132 Chars
BAPI Function module for changing PO item Text
commiting the bapi change
SORT t_bapi BY ebeln ebelp.
LOOP AT t_ebeln INTO wa_ebeln.
    LOOP AT t_bapi INTO wa_bapi WHERE ebeln = wa_ebeln-ebeln.
      REFRESH t_return.
      READ TABLE t_input INTO wa_input
        WITH KEY ref_num = wa_bapi-ref_num
                 item = wa_bapi-ebelp.
      IF sy-subrc EQ 0.
        APPEND wa_input TO t_output.
        w_len = STRLEN( wa_input-text ).
        wa_potextitem-po_number = wa_bapi-ebeln.
        wa_potextitem-po_item = wa_bapi-ebelp.
        wa_potextitem-text_id = 'F01'.
        wa_potextitem-text_form = '*'.
        wa_potextitem-text_line = wa_input-text+0(132).
        APPEND wa_potextitem TO t_potextitem.
        IF w_len > 132.
          wa_potextitem-po_number = wa_bapi-ebeln.
          wa_potextitem-po_item = wa_bapi-ebelp.
          wa_potextitem-text_id = 'F01'.
          wa_potextitem-text_form = '='.
          wa_potextitem-text_line = wa_input-text+132(123).
          APPEND wa_potextitem TO t_potextitem.
        ENDIF.
      ENDIF.
    ENDLOOP.
    CALL FUNCTION 'BAPI_PO_CHANGE'
      EXPORTING
        purchaseorder = wa_bapi-ebeln
      TABLES
        return        = t_return
        potextitem    = t_potextitem.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait   = ' '
      IMPORTING
        return = wa_bapiret2.
Regards
Krishna

MIGO-sales order number and line item not validated for 501E mvt in MIGO.

Hi All,
In MIGO i am trying to post for 501E(specisl stock=order on hand) movement type, here i am entering the material and in the where TAb even if I enter wrong sales order number or wrong sales order line item number. the system allows to post .
its not validating the material against the sales order number and line item number that is entered to check whether that material really exists in that particular sales order or not.
is there a way to fix this?
Thanks
Mahendra

hi
i dont think vvalidation is possibel
as the system dont know whaich material is assigned to which SO
as we r takeing the stock without PO
if u want to validate then system can validate the quantity that is also with use of some user exit
correct me if i am wrong

How the sales order header status update?

Hello,
In the sales order header "STATUS" tab is there, under this status tab we can find OBJECT status if we click that object status it shows the Object number,Object category,status profile and status with status no. on which bases this status will update in the sales order header?
my case is Status "10-xxxx" set automatically for some orders.
Could you plz let me know on which bases, the status will be updated in the sales order?
Regards|KS

Hi
SAPu2019S GENERAL STATUS MANAGEMENT FUNCTIONALITY
General Status Management replaced order status management functionality in recent SAP releases (4.6C). This discussion will address general status management, as this is how SAP allows user statuses for controlling objects in this and future releases.
General Status Management applies to internal orders, project definitions, WBS elements, production orders and many other objects in SAP. For the purposes of this discussion we will concentrate on status management for internal orders and WBS elements. A list of all objects relevant for status management will be made available upon request.
A status is an indicator that fulfills two functions. First, it informs you that a particular status has been reached. For example, an internal order has been created and released; a settlement rule has been entered; a particular business transaction has been executed, etc. Second, it influences the business transactions you can perform for a particular status. A status can allow a business transaction; allow a business transaction but issue a warning message; or prohibit a business transaction altogether. If a warning message is issued it is up to the user whether the business transaction is carried out or not.
Statuses can be used to control and communicate. Statuses can be used in reporting (show me a report of all internal orders with a status of TECO, or technically complete). Statuses can be used as selection criteria (select all internal orders with a status of CLSD, or closed). Statuses can communicate the state of an object (ready for archiving, not ready for settlement execution).
There are SAP standard delivered statuses that apply to all object types. These are known as SYSTEM STATUSES. CRTD, REL, SETC, TECO are examples of SAP standard system statuses. SAP standard system statuses cannot be removed from use. You cannot override the SAP system status with a user status. You cannot change the behavior of an SAP system status.
User statuses (or user defined statuses) exist in addition to SAP standard statuses. User statuses are intended to augment or refine SAP standard statuses, not replace them. There is no limitation to the number of user statuses that can be created. Both system and user statuses influence business transactions in the same way.
An object can have multiple statuses active at the same time. A plant maintenance order can have released, preliminarily costed, work order printed and confirmed statuses all at the same time. For SAP display purposes only one status can be displayed on the status line in master data screens, but it is possible to see all active statuses for an object at one time by drilling down into the master data screens.
A STATUS PROFILE, or user status profile, contains individual user statuses and the business transaction rules defined for those statuses. There is no limit to the number of user status profiles that can be maintained in SAP. A user status profile is assigned to an order type or a project profile in configuration. This user status profile is then defaulted into all objects that reference that order type or project profile. A users status profile can be overwritten (or deleted) in an individual object (via native master data screens), but only if a user status has yet to be activated for that particular object. Once a user status has been activated for that object the user status profile cannot be changed.
HOW STATUS MANAGEMENT WORKS
When an object (internal order, WBS element, production order) is created SAP assigns the system status CRTD. MIT automatically releases the order, so the system status REL is also activated. If there is a user status profile defined in the order type (or project profile) this is carried over into the internal order (or WBS element). If not, only the SAP system statuses will apply to this object.
When a user executes a business transaction for this object, SAP checks the user status to see if that business transaction can be executed without any additional influence from a user status, can be executed but with a warning message being issued, or cannot be executed at all. SAP also checks whether the business transaction sets or deletes any other user statuses within the user status profile.
A user status may also be maintained directly in the object master data. Accessing the master data screens allows a user to manually maintain user statuses. If necessary, an authorization code can be assigned to a user status to ensure that no unauthorized persons can change the status of an object. Once changed, the new user status is fully active and acts no differently than if a business transaction set the user status.
Status management and business transaction control only work with standard SAP transactions. Z transactions will not show up on the business transaction list for an object. The business transaction table is configurable, but SAP strongly recommends not changing that table. SAP directly updates that table via support packs and it is often impacted during upgrades.
Authorization codes / keys are available in user statuses. The authorization code is checked only when user statuses are being set manually, from within the objectu2019s master data screens. This ensures the user has the proper authorization to set that status for that particular object. However, it is important to understand that SAP sets a user status in reaction to a business transaction it does not perform an authorization check.

How to Cancel a Sale Order without cancelling the subsequent document.

Dear All,
I want to cancel sale order but the sale order have a subsequent document is there is any soulution that when i cancel the sale order all the subsequent document, outbound delivery and invoice cancelled in jn\ust one step, if not then what is the other way to solve that problem.

Hi
You can reject the sales order by going to VA02
Go to-> Item -> Enter Reason for Rejection
and save the order.
This will reject the order even if the subsequent documents are created so that no further open quantities can be delivered.
Reward points if useful.
Regards,
Nimit
Edited by: Nimit Raiya on Jul 3, 2008 4:03 PM

How to create the sales order using BAPI's ....?

Hi Guru's,
could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically i don't have basic knowledge on this....please provide required inputs ....:)
thanks in advance
Srinivas......

Hi Guru's thanks for your inouts and your valuble time...
please find the program logic below...
*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln                   TYPE vbak-vbeln,
       gs_order_header_in         TYPE bapisdhd1,
       gs_order_header_inx        TYPE bapisdhd1x,
       gt_order_items_in          TYPE STANDARD TABLE OF bapisditm,
       gwa_itab1                  TYPE bapisditm,
       gt_order_items_inx         TYPE STANDARD TABLE OF bapisditmx,
       gwa_itab2                  TYPE bapisditmx,
       gt_order_partners          TYPE STANDARD TABLE OF bapiparnr,
       gwa_itab3                  TYPE bapiparnr,
       gt_return                  TYPE STANDARD TABLE OF bapiret2,
       gwa_itab4                  TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
    order_header_in               = gs_order_header_in
    ORDER_HEADER_INX              = gs_order_header_inx
IMPORTING
    SALESDOCUMENT                 = gs_vbeln
tables
    RETURN                        = gt_return
    ORDER_ITEMS_IN                = gt_order_items_in
    ORDER_ITEMS_INX               = gt_order_items_inx
    order_partners                = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF.

Complete delivery indicator in the sales order header level

my order quantity is 10 and having the complete delivery indicator in the header level
Complete delivery indicator in the sales order header level
when i am doing the partial delivery i got below error
Delivery quantity is less than quantity of 10 PC assigned to batches
this is warehouse linked.
Please let us know how to do the partial delivery.
when i click on the bacth icon to reduce the quantity it is greayed out.
is there any posiblity to reduce the quantity in the transfer order
Please do the needfull
thanks
Raju.

Hi
Usually this Complete delivery indicator flow from Customer master data. you need to change this data in Customer Master
Sales Area Tab under Shipping view Remove the Complete delivery indicator, also in Partial delivery per item keep the field Blank ( Partial deliveries allowed )
I hope this will solve your issue
Award if useful to you

How-to extend the Sales Order with the Project ID?

Hello ByD Community,
My problem is the following:
I want to add an extension field to the Sales Order Header, which would be the Project ID assigned to this Sales Order.
My use case only involve one Project ID per Sales Order, and the task will be the same from a Line Item to another. So I can only use the GetFirst() to retrieve only the first Line Item.
Past week, I asked a similar question for the Purchase Orders and I succeeded to do it after a hint from Dan!
As for the Purchase Order, I thought the Project Assignment was built through the SalesOrder.Item.ItemAccountingCodingBlockDistribution.AccountingCodingBlockAssignment.ProjectReference, but it seems that it is different.
So as soon as I try to check if this Association IsSet() it just returns me that it is not!
I succeeded to bluntly push the TaskUUID in my Extension field for testing purpose, without any check and verification, but not the Project ID neither with good validations.
I also tried to see with the SalesItem Association instead of the Item Node, but it is the same. Any time I try a different check it returns me the N/A for my field, which is my last condition if the association is not set! What is driving me crazy is that you have the Project ID is shown on the top of the Sales Order, but I just cannot find how to retrieve it in the Studio!!!
Here is my sample code in my After-Modify event (I also tried with a On-Save) where the ProjectIDSalesOrder is my extension field in the Cloud Solution:
import ABSL;
if (this.Item.GetFirst().ItemAccountingCodingBlockDistribution.IsSet())
if (this.SalesItem.GetFirst().ItemProduct.ProductCategoryHierarchyProductCategoryIDKey.ProductCategoryInternalID.Matches("130"))
this.ProjectIDSalesOrder = this.SalesItem.GetFirst().ItemServiceTerms.ProjectTaskUUID.content.ToString();
/*what I need actually is : this.ProjectIDSalesOrder = this.Item.ItemAccountingCodingBlockDistribution.AccountingCodingBlockAssignment.GetFirst().ProjectReference.ProjectID.content;*/
else {this.ProjectIDSalesOrder = "No project assigned";}
else {this.ProjectIDSalesOrder = "N/A";}
If anybody could help me on this, it would be greatly appreciated.
Thank you community!
Best regards.
Jacques-Antoine

Hello all,
To follow up on this issue, I found that a QueryByElements is available in the SalesOrderOverview node. And we can Query the SalesOrder by ProjectID.
Fine! However, we cannot retrieve the ProjectID. It is never proposed as a result in the Query. We can query againt a ProjectID but not retrieve it.
As the ItemAccountingblockDistribution association seems to never be set, we can't retrieve the ProjectID from it neither.
I will post an incident to see if the ProjectID can be released as an entity in the SalesOrderOverview. QueryByElements results, so as to be able to use it.
Thanks for your attention.
Jacques-Antoine

How to pull the Sale order number(sales document) to Accounting document

Hi Gurus,
How to pull the sale order number to the accounting document.
Is any configuration needed to this.
When i run the FBL5N Repoprt ,Sale order number (Sales document) is not getting updated to accounting document.It is diplaying as blank field.
Thanks you.

Hi Shivaji,
In order to display the Sales document in the customer line item report, you need to add it as a special field thorugh customizing settings.
Path - SPRO - FA-GL Accounting - GL Accounts - Line Items - Define special fields for finding and sorting data and in that select the table BSEG-and field VBEL2 (Sales document) and save/
This will work. hope this helsp
regards,
radhika

BAPI/IDOC to cancel the sales order ?

Hi folks,
What is BAPI /IDOC to cancel the sales order in ECC via PI .
Thanks.,
Shiva

Hi Shiva,
To my thinking you can use the BAPI for canceling and updating the sales order.
For further reference you can have a look on the below link:
BAPI SALESORDER CHANGE
In this link you will find the values to be filled for performing different function for the BAPI.
Regards
Ravi Anand

Which table stores the Sales Order--Header--Texts--EDI Text?

Hi Experts,
I hv a requirenment regarding the Sales Order -> HEADER -> TEXTs -> EDI Text-Int, so, I need to hv some Orders(#). which does hv this text on them, for as test data.
So, I am looking which table stores, this text for my_sales_oders_12345678.
[ actually, i got some info from sdn, like,
Table TTXOB -> stores Texts: application object for Sales order header it is always VBBK i.e. field TDOBJECT = VBBK.
Now all the text types i.e. text ids are stored in table TTXID
So fetch all text ids(TDID) from this table based on TDOBJECT = VBBK. And its descriptions are stored in TTXIT table.
but, no use this ]
thanq
Edited by: Srinivas on Jul 10, 2008 11:06 PM

Hi Srinivas,
Generally to access the text we use READ_TEXT function Module.
we need to pass the four parameters
ID
LANGUAGE
NAME
OBJECT
You can find these parameters in the sales order it self.
Goto ---> Header ---> Texts
Now double click on the text it takes you to the Text Editor. You can find the screen Display Form Header . In this goto Menu Path Goto ---> Header. You get a screen Text header. Here you can find the these parameters.
Text Name
Language
Text ID
Text Object
You need to pass these parameters to the function Module to text the text.
You can also fins the text in Table STXH
Best regards,
raam

How the prodution order start and finis dates are changeing...?

Dear friends,
It was observed that one of my client's production order start and finish dates are changing frequently.
No user is claiming the responsibility, I feel very dificult to to find out who did the changes.
When I observed, it is happening for orders if we Revert the Teco, and that to for those orders which doesn't have the sale order assignment.
and some times it is not happenign for even for the orders which does not have the sale order assignment also.
Here it is having Forward type Sheduling.
Please help me how and when , the prodcuction orders start and finish dates will get changed.

Dear RS,
Plz check in AUT10, by giving t-code CO02 for order changes
in AUT10, u can track user id also
this may help you to some extent
Regards
kumar
Edited by: kumar kumar on Sep 17, 2009 8:32 AM

How to settle the sales orders

Hi experts,
Can anyone tell me how to settle the sales orders? What is the transaction code?
regards
vk

Hi VK ,
Being production consultant I think production order which is created with reference to sale order will be settled in ko88 or co88 after calulating variance ( and settling in variance a/c ) , Work in progress .
Prod order should have TECO indicator before you settle .
Neal

How to cancel the sales order - header and line status are in Entered Stage

Similar Messages

Maybe you are looking for