How to cancel-undo new adjustment layer in CS4

How do I cancel a new adjustment layer in CS4?
I used to just hit Exc key and it would disappear.
Now Command+z won't even undo it.
That makes me have to click on it in the layers pallet and drag it in the trash...

'Initially' my ***. Unless they improve both the performance and the interface design of the Adjustments Panel hugely. They would also have to find a way to float the panel, so it disappears.
The two 'advantages' of the panel are as follows - 1 the TAT tool allowing within image dragging to adjust values. I assume for users without the ability to grasp the concept the most powerful tool, Curves. I will admit that when it eventually is fast enough to use efficiently, and implemented smoothly, this may be a good addition. 2 - the ability to alter opacity and mode of the adjustment, without exiting the dialog. More of a choice for inexperienced users who think this should be necessary at all.
At the moment these two, relatively minor for advanced users, advantages are outweighed by the many disadvantages by a long chalk.
You don't need to do V and then delete in CS4 - the delete key just deletes layers

Similar Messages

Rotate canvis unintuitive, hot key limitations, new adjustment layer features? Brush size slider bad

I've been using photoshop for a while, as well as a number of 3D applications. Speed and efficiency have always been very important, and I usually customize my software a lot to make it work for me. These are some of the things photoshop could do better in comparison to the user interfaces in some 3D programs.
Rotate canvas unintuitive:
While having a center pivot seems more intuitive at first, it actually causes me nothing but trouble having to always figure out where the center is, and then deciding how close i am (which will change speed of rotation). I would like at least an option to simply drag left and drag right for clockwise and counterclockwise at a specific speed.
Hot Key Limitations:
alt R and control R and shift R cannot be assigned to different things. I would prefer it if i could customize all of these.
new adjustment layer features:
often when painting in photoshop, i create an adjustment layer over all the layers. If i like how it looks, and want to continue painting, i have to either turn it off while i work and switch it on at the end again, flatten the entire painting loosing the layer separations, or duplicate the adjustment layer and setting it next to each pre-existing layer and then merging each set of 2 layers(the original + the duplicated adjustment layer).
It would be really wonderful if the process of duplicating the adjustment layers and flattening each set of 2 could be automated. a sort of Flatten to all individually button.
Brush Size Slider:
Zbrush has a very wonderful brush size change. I never appreciated it until trying photoshops. (previously to this i used another piece of hardware with a scroll wheel to change brush size. and still do. why the heck is the first brush size jump 10 units!?! simply a linear brush size change would have been awesome. although including a brush size slider is already pretty awesome
These things have been bothering me for a long time, and i always assume these problems that are obvious to me are probably obvious to everybody else and therefore will be fixed without my small intervention, but i figure this cant hurt. Thanks for all the hard work and the wonderful product!

This is a poorly explained reason about why is so important having a loupe in Photoshop. I've not also, used the best example, but I will. This belongs to the ADDITIONAL FEATURES: Loupe/Magnificator View:. Also, I will try to make my english clrearer, but here it goes:

New Adjustment Layer - Levels/histogram GLITCH ?

I use the non-destructive Adjustment Layers (Layers/New Adjustment Layer) all the time. Today when I was playing around on the CS6 beta for Photoshop, I discovered that after selecting the New Adjustment Layer for Levels that I couldn't see the historgram graph when tried to re-access the Adjustment Layer by clicking on the Levels icon on the layer palette. I shut photoshop off and reopened it, hoping it had a quick reset fix... but no luck. When I first open up a Levels Adj. Layer, I can see the historgram and slide bar, but when I close it, and return to it to do additional work, I can no longer see the histogram graph. All I see is a smaller version of what looks like a small dark grey levels box, with the 3 levels arrows (left-dark, middle-mid tones, right-light) but no histogram to make adjustments with.
Am I missing something here...? Is this super obvious and I just need another cup of coffee to make it all become clear?

Hello, could you post a screen capture? http://forums.adobe.com/message/4209263#4209263
And please post Photoshop's help>System info...
Is there any content in the image? the levels histogram will look empty if the image is all black or white.

Photoshop CS3 freezing when I create a new adjustment layer

I am working on a Macbook Pro. Have plenty of memory/RAM/scratch disk space.
When I try editing an image (which I have exported from Lightroom) PS freezes as soon as a new adjustment layer is created. When there is a second layer, I am unable to return to the original layer. Tool switches automatically from default "move" tool to "eyedropper" and PS freezes.
Have been through all the archives and can find no help. Also just re-installed PS from the disk and still have the same issue.
Thanks for any advice/help.

Usually just checking the system display configuration and sorting that out will make it work. Photoshop tries to make sure the dialogs are displayed on an active display, but has to trust the OS about what displays are active.
If you ever get completely stuck, then resetting Photoshop preferences will reset all dialog locations and EVERYTHING ELSE - so backup your favorite settings and presets before doing a complete reset.

Confounded by error sound after creating new adjustment layer

after creating a new adjustment layer I (often) find that despite having clicked on the new mask I cannot either change the background colour, or zoom the brush etc I just get an error sound 'plonk'
If I click on another layer then back it will work - this keeps hapening -what am I doing wrong? I also can create adjustment layers at other times with no problems, not chaninging anything AFAICS
thanks for your help

Hello, could you post a screen capture? http://forums.adobe.com/message/4209263#4209263
And please post Photoshop's help>System info...
Is there any content in the image? the levels histogram will look empty if the image is all black or white.

New Adjustment layer vs. new solid and turn on adj icon

Hello All,
Is it safe to say that an Adjustment layer is just a solid layer named Adjustment Layer with the black and white adjustment icon activated and that defaults to a Solid Setting that is comp size and white in color.
thanks

That's close. Any layer can be turned into an adjustment layer, not just a a solid-color layer. When you create a new adjustment layer with the Layer > New > Adjustment Layer command, it creates a regular white solid-color layer as you describe and then turns the Adjustment Layer switch on for that layer.

New Adjustment Layer

Hello. I am having trouble in New Adjustment layer. When I open Bridge and select a photo and go to CS3 I set up a duplicate layer and if I go to New adjustment layer and select any from that menu, ie, Photo filter... color mixer to convert to B&W the event show up in the layers side bar but the the eye dropper tool shows up in the photo and CS3 locks up. If I go to Image>Adjustments I can use the filters. However if I go Layer>New Adjustment Layer it locks up. I have recently added an Epson RX595 printer but thinking that is the the problem disconnected it but it still locks up and I have to go to Force Quit to restart CS3. I am new to iMac and have Leopard 10.5.2 3GB in RAM.
What am I doing wrong or what needs to be done.

Arnold,
Your post is far from clear. You may want to clarify for the benefit of others who may be able to help.
Since you mention Leopard, however, I can't help myself.

Dont have curves options under layer new adjustment layer in pse 10

please help! I cannot find the curves option! Its not under layers>new adjustment layer in pse10

There is no curves adjustment layer in PSE. There is a kind of curves if you go to Enhance>Adjust Color>Adjust Color Curves. There's a free curves adjustment layers in both Grant's tools:
http://www.cavesofice.org/~grant/Challenge/Tools/index.html
and the inexpnsive elements+ from simplephotoshop.com also has them, but both are slightly crippled by adobe's disabling of some underlying features at a deep level since PSE 4. If you use windows, many people prefer the free smartcurve from easyfilter:
http://www.brothersoft.com/smartcurve-170864.html
(no mac equivalent, alas)

PS crashes with New Adjustment Layer . . .

I'm using PS4, and now suddenly when I try to apply a new adjustment layer Photoshop crashes.
Any suggestions?

I have version 11.0.2, the latest. But the crash report is very long.
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   com.adobe.Photoshop               0x003a0003 0x1000 + 3796995
1   com.adobe.Photoshop               0x0007c732 0x1000 + 505650
2   com.adobe.Photoshop               0x0007c732 0x1000 + 505650
3   com.adobe.Photoshop               0x000775e7 0x1000 + 484839
4   com.adobe.Photoshop               0x0073aa04 0x1000 + 7576068
5   com.adobe.Photoshop               0x0007c732 0x1000 + 505650
6   com.adobe.Photoshop               0x00734210 0x1000 + 7549456
7   com.adobe.Photoshop               0x0073606c 0x1000 + 7557228
8   com.adobe.Photoshop               0x0073b8aa 0x1000 + 7579818
9   com.adobe.Photoshop               0x00069b05 0x1000 + 428805
10 com.adobe.Photoshop               0x00069da7 0x1000 + 429479
11 com.adobe.Photoshop               0x0006ae23 0x1000 + 433699
12 com.adobe.Photoshop               0x000628f0 0x1000 + 399600
13 com.adobe.Photoshop               0x0006a6e5 0x1000 + 431845
14 com.adobe.Photoshop               0x00063c65 0x1000 + 404581
15 com.adobe.Photoshop               0x00063dd3 0x1000 + 404947
16 com.adobe.Photoshop               0x0006212f 0x1000 + 397615
17 com.adobe.Photoshop               0x002205da 0x1000 + 2225626
18 com.adobe.Photoshop               0x00220666 0x1000 + 2225766
19 com.adobe.Photoshop               0x00003812 0x1000 + 10258
20 com.adobe.Photoshop               0x00003739 0x1000 + 10041
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0   libSystem.B.dylib                 0x99eac382 kevent + 10
1   libSystem.B.dylib                 0x99eaca9c _dispatch_mgr_invoke + 215
2   libSystem.B.dylib                 0x99eabf59 _dispatch_queue_invoke + 163
3   libSystem.B.dylib                 0x99eabcfe _dispatch_worker_thread2 + 240
4   libSystem.B.dylib                 0x99eab781 _pthread_wqthread + 390
5   libSystem.B.dylib                 0x99eab5c6 start_wqthread + 30
Thread 2:
0   libSystem.B.dylib                 0x99e85b42 semaphore_wait_signal_trap + 10
1   libSystem.B.dylib                 0x99eb36f8 _pthread_cond_wait + 1089
2   libSystem.B.dylib                 0x99efc05f pthread_cond_wait + 48
3   com.adobe.amt.services            0x09c20552 AMTConditionLock::LockWhenCondition(int) + 46
4   com.adobe.amt.services            0x09c1b995 _AMTThreadedPCDService::PCDThreadWorker(_AMTThreadedPCDService*) + 115
5   com.adobe.amt.services            0x09c205b0 AMTThread::Worker(void*) + 20
6   libSystem.B.dylib                 0x99eb3259 _pthread_start + 345
7   libSystem.B.dylib                 0x99eb30de thread_start + 34
Thread 3:
0   libSystem.B.dylib                 0x99e85b4e semaphore_timedwait_trap + 10
1   ...ple.CoreServices.CarbonCore    0x99826942 MPWaitOnSemaphore + 125
2   MultiProcessor Support            0x25c32eff 0x25c03000 + 196351
3   ...ple.CoreServices.CarbonCore    0x997f454a PrivateMPEntryPoint + 68
4   libSystem.B.dylib                 0x99eb3259 _pthread_start + 345
5   libSystem.B.dylib                 0x99eb30de thread_start + 34
It goes on this way through thread 31 . . .
Thanks

Clicking ALT to name a new adjustment layer

In some tutorials, it says that holding the ALT key when clicking the add adjustment layer button at the bottom. will bring up a new layer dialogue box so that the adjustment layer can be named. This does not seem to work in PS CC or CC 2014. If you use Window>Adjustments and hold ALT while choosing an adjustment it does work. How do I get it to work by using the button at the bottom of the panel?

Hm, I just held down the Alt key and clicked on an Adjustment panel icon and it popped up this:
I'm running Windows 8.1 with Photoshop CC 2014.1 here. What happens when you hold Alt and click the Curves button like I did? Does it just insert a Curves layer without any prompt?
-Noel

Problem: curve adjustment layer in cs4

Ive upgraded to CS4 and I have found that the curves Adjustment layer runs slow and sticky and Its difficult to make fine adjustments. (the regular curves window works fine but you cant save it as an adjustment layer) I am running 10.5.6 on a 2x3 GHz Dual-core intel with 9gb of ram, a scratch disk of raid 0 with 500gb of freespace. This should not be a problem for my machine. is there a setting I am missing or is CS4 no good?

I understand your annoyance about this. I didn't say it doesn't work, it does.
"fine, critical moves that are intuitive and subtle" that's the problem with the new adjustments panel, it is more difficult to make these fine adjustments, still possible just less responsive. You can still bring up the old dialog.
Did you do a search to find my explanation of how to use CS3 to create Actions that will bring up the modal dialog? I'm not going to take the time to explain it again, if you haven't done this. There is also a Configurator panel that John Knack posted has two buttons 'create new curve' and 'edit existing curve'. Configurator is a new app that Adobe have introduced. Read all the discussions so far on the forum.

Why is new adjustment layer hue/saturation grayed out?

I am working on this text tutorial and when I get to step 19, my options are grayed out.

Why would I be unable to select a new adjustment layer from the dropdown menu

I can see it... it's just not highlighted for me to be able to select it.

Be sure the Project panel is selected.

[Photoshop CC (Win7 64bit)] Adjustment Layer keeps old value when I made undo.

Undo in Adjustment layer in Photoshop CC doesn't work well.
When I made undo, the photo would go back, but "Properties Panel" doesn't go back. It still keeps the same value before undoing.
Properties Panel would go correct value, after I select a another layer and select adjustment layer again.
I checked all of adjustment layers, and I found that most of them has the same behavior. (Between Brightness/Contrast... and Selective Color...)
Are there any solution?
What version of Photoshop : 14.0
Have you installed the recent updates?: Yes
What operating system? : Windows7 64bit
What kind(s) of image file(s)? : any kind
If you are getting error message(s), what is the full text of the error message(s)? : no message
What were you doing when the problem occurred? undo
Has this ever worked before? no (CS6 works well)
What other software are you running? Google Chrome
Tell us about your computer hardware. RAM16GB Free space on C: 80GB
Has this ever worked before? : no

I'm moving this post from this forum for photoshop-dot-com (an online portal) to the correct forum for Photoshop pro users like yourselves, where your question can be answered.
FYI, the correct forum URL is: http://forums.adobe.com/community/photoshop
Since you've posted in this forum for Photoshop.com, you may receive additional posts in this forum unless you update your profile. After signing in on these forums, go to Your Stuff > Forums, and disable any forum you don't want to watch.
Kind regards,
Charlie

Alt + Create new Fill or Adjustment Layer CC2014

Alt + Create new Fill or Adjustment Layer Photoshop CC2014 not working
In Photoshop CS6 I can click on the Alt key and select Create new Fill or Adjustment Layer to create a new adjustment layer with options, but when I try the same in Photoshop CC2014 clicking the Alt doesn't work that way, is there something that I'm doing wrong or maybe there's another shortcut key that I'm unaware of. Is there another way to do the same thing as CS6
System Spec
Windows Pro 8.1
16 GB RAM
300 GB Scratch Disk
2GB Graphics Card
Everything up to date

It also work in Photoshop CC like in CS6 but not in CC 2014 it seem to be a bug.

How to cancel-undo new adjustment layer in CS4

Similar Messages

Maybe you are looking for