How to cancel vacation response
anyone now how to cancel a vacation response?
Solved!
Go to Solution.
If you are not sure which system you are on use this link
http://diagnostics.bt.com/login/?workflow=EmailChecker
If you are on BTYahoo go to the "cog" icon at the top right, click on it and scroll to "settings" click and then scroll to "Holiday Response" click on it and then untick the box marked "use between these dates".
Similar Messages
-
How to cancel a service request?
I had been running the Ipod in the car and noticed it had gone into the red. I turned it off and it went off normally. When I got home I hooked it to the computer to charge and it froze up completely, no response to anything, hold button, click wheel, weirdest yet, the backlight stayed on permanantly. And the computer did not recognize that it was even connected in Itunes or as a drive.
So I freaked out a bit and after an hour or so while( after trying what I could which was basically holding controls down and flipping the hold button off and on ) I gave up and put in a service request, and went to bed.
The next day, I noticed that the Ipod was dark ( which I expected since the battery was almost gone and the backlite was stuck on ). But just for fun I press the clickwheel on and lo and behold, it came back on as normal. I hooked it up to the computer as usual and it was visible to Itunes and the computer as it should have before. So I went through the reset process just in case and relaoded my music.
So I guess there should be a 6th "R" Let it sit over night and see if it still screwed up the next day
Now I'm stuck trying to figure out how to cancel a service after already receiving the return box Which was very fast by the way. Like, 2 days. Anyway, I looked all over the support site and could not find anything that looked like what I needed.
Does anyone have any idea what I need to do to cancel the service request?
Mike
Dell Dimension 8400 Windows XP Pro
Dell Dimension 8400 Windows XP ProCall apple...
Apple Phone Numbers
btabz -
How to cancel/reverse confirmation of service in SD module?
Hello
How to cancel/reverse confirmation of service in SD module?
By confirmation of service I mean document which we can see in SD documents flow (if scenario is without goods movement).
User need to delete delivery but confirmation of service and sales invoice were posted. We reversed invoice but do not know how to cancel/reverse confirmation of service.
Additionally u2013 is there any transaction where I can look at confirmation of service? It is NOT possible to look at this document in flow documents.
Thank you in advance.
ArekHello
Thank you for response.
It was NOTcreated in CS module. There is nothing in iw33.
It is confirmation of service in SD module.
Flow:
- you create sales order
- you create delivery with reference to sales order
- you post goods issue (if quantity for picking is 0 u2013 no movement in stock) confirmation of service will be created by the system. Now I need to cancel this document.
Best regards
Arek -
HT4098 how to cancel zoosk?
how to cancel zoosk in itunes
I Could not find a way to cancel either. I didn't do this through iTunes, probably a mistake, but gave them a debit card. I sent a message via contact us. I advised that I did not wish to auto renew and would pursue remedies under the doctrine of promissory estoppel or as a fraud victim. They appear predatory and sneaky.ill advise if I receive response.
-
How do I maintain responsive scaling on an edge animate animation when I insert it into dreamweaver? Please and thank you!
example.com is a generic http:// address to illustrate the difference between what you gave, file:/// and an actual URL address. There are no tutorials on that site. Sorry for the confusion.
#1 Have you procured your domain name and web hosting yet? You'll need to do that to publish your pages online.
#2 When you sign-up for web hosting, the company will send you FTP log-in credentials to your site's web server. You will enter this info into your DW Site Definition. Site > New Site > See screenshots below:
Under Servers: Root Directory is whatever your hosting company tells you to use. This varies by web host. Some commonly used ones are public_html, www or htdocs.
After your site definition is set-up, hit the TEST button to confirm it's working. If it's not connecting, go to More Options.
Go to the Files Panel (F8). Use the UP Arrow to PUT files to remote server.
Use the DOWN Arrow to GET files from server to your local site folder.
Post back when you have finished uploading your work to the remote server.
Nancy O -
How to cancel the event in Item Adding without going to the SharePoint Error Page?
Prevent duplicate item in a SharePoint List
The following Event Handler code will prevent users from creating duplicate value in "Title" field.
ItemAdding Event Handler
public override void ItemAdding(SPItemEventProperties properties)
base.ItemAdding(properties);
if (properties.ListTitle.Equals("My List"))
try
using(SPSite thisSite = new SPSite(properties.WebUrl))
SPWeb thisWeb = thisSite.OpenWeb();
SPList list = thisWeb.Lists[properties.ListId];
SPQuery query = new SPQuery();
query.Query = @"<Where><Eq><FieldRef Name='Title' /><Value Type='Text'>" + properties.AfterProperties["Title"] + "</Value></Eq></Where>";
SPListItemCollection listItem = list.GetItems(query);
if (listItem.Count > 0)
properties.Cancel = true;
properties.ErrorMessage = "Item with this Name already exists. Please create a unique Name.";
catch (Exception ex)
PortalLog.LogString("Error occured in event ItemAdding(SPItemEventProperties properties)() @ AAA.BBB.PreventDuplicateItem class. Exception Message:" + ex.Message.ToString());
throw new SPException("An error occured while processing the My List Feature. Please contact your Portal Administrator");
Feature.xml
<?xml version="1.0" encoding="utf-8"?>
<Feature Id="1c2100ca-bad5-41f5-9707-7bf4edc08383"
Title="Prevents Duplicate Item"
Description="Prevents duplicate Name in the "My List" List"
Version="12.0.0.0"
Hidden="FALSE"
Scope="Web"
DefaultResourceFile="core"
xmlns="http://schemas.microsoft.com/sharepoint/">
<ElementManifests>
<ElementManifest Location="elements.xml"/>
</ElementManifests>
</Feature>
Element.xml
<?xml version="1.0" encoding="utf-8" ?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Receivers ListTemplateId="100">
<Receiver>
<Name>AddingEventHandler</Name>
<Type>ItemAdding</Type>
<SequenceNumber>10000</SequenceNumber>
<Assembly>AAA.BBB, Version=1.0.0.0, Culture=neutral, PublicKeyToken=8003cf0cbff32406</Assembly>
<Class>AAA.BBB.PreventDuplicateItem</Class>
<Data></Data>
<Filter></Filter>
</Receiver>
</Receivers>
</Elements>
Below link explains adding the list events.
http://www.dotnetspark.com/kb/1369-step-by-step-guide-to-list-events-handling.aspx
Reference link:
http://msdn.microsoft.com/en-us/library/ms437502(v=office.12).aspx
http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspx
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.Recommended way for binding the list event handler to the list instance is through feature receivers.
You need to create a feature file like the below sample
<?xmlversion="1.0"encoding="utf-8"?>
<Feature xmlns="http://schemas.microsoft.com/sharepoint/"
Id="{20FF80BB-83D9-41bc-8FFA-E589067AF783}"
Title="Installs MyFeatureReceiver"
Description="Installs MyFeatureReceiver" Hidden="False" Version="1.0.0.0" Scope="Site"
ReceiverClass="ClassLibrary1.MyFeatureReceiver"
ReceiverAssembly="ClassLibrary1, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=6c5894e55cb0f391">
</Feature>For registering/binding the list event handler to the list instance, use the below sample codeusing System;
using Microsoft.SharePoint;
namespace ClassLibrary1
public class MyFeatureReceiver: SPFeatureReceiver
public override void FeatureActivated(SPFeatureReceiverProperties properties)
SPSite siteCollection = properties.Feature.Parent as SPSite;
SPWeb site = siteCollection.AllWebs["Docs"];
SPList list = site.Lists["MyList"];
SPEventReceiverDefinition rd = list.EventReceivers.Add();
rd.Name = "My Event Receiver";
rd.Class = "ClassLibrary1.MyListEventReceiver1";
rd.Assembly = "ClassLibrary1, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=6c5894e55cb0f391";
rd.Data = "My Event Receiver data";
rd.Type = SPEventReceiverType.FieldAdding;
rd.Update();
public override void FeatureDeactivating(SPFeatureReceiverProperties properties)
SPSite sitecollection = properties.Feature.Parent as SPSite;
SPWeb site = sitecollection.AllWebs["Docs"];
SPList list = site.Lists["MyList"];
foreach (SPEventReceiverDefinition rd in list.EventReceivers)
if (rd.Name == "My Event Receiver")
rd.Delete();
public override void FeatureInstalled(SPFeatureReceiverProperties properties)
public override void FeatureUninstalling(SPFeatureReceiverProperties properties)
}Reference link: http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspxOther ways of registering the list event handlers to the List instance are through code, stsadm commands and content types.
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights. -
How to cancel an order if transaction not complete
How to cancel an order if transaction not complete
Presuming you're referring to a purchase from the iTunes Store, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Refunds are not guaranteed, but iTunes support should be able to help you in one way or another.
Regards. -
How to cancel an order or to remove one item, bought as a guest?
how to cancel an order or to remove one item, bought as a guest?
That does not help at all.
Please explain. Use sentences please.
How do you buy something as a guest?
You have an iphone?
You purchased an app?
You don't want the app? Simply delete it. This is covered in the manual.
If you do not explain what you are talking about, then it is very difficult to help -
How to cancel excise invoice when mov type is 122
Hello,
We are creating the PO for one material. and make the GR for that material (material is Quality inspection material)
so i,e the reason the material is goes to Quality inspection.
Till then we are Made the J1IEX create the Part1 and Part2 entry.
So in mean while in Quality all the material's are rejected so, now how to reverse the Part1 and Part2 entries.?
How to cancel excise invoice when material is qulaity inpspection.
What i made:
Made the Return delivery means 122 mov doc and Try to cancell the excise invoice......but no successful
Regards
sapman manHi
Cancelling of excise invoice will be done in the following ways depending on the situation.
Case 1:
Create PO
Do MIGO (create and post excise invoice)
Create return delivery in quality inspection.
Now we have to create a rejection inmvoice in J1IS with reference to the return delivery wherein the excise values gets reversed.
If u try to reverse part 2 entries in J1IEX it will not come.
Case2:
Create PO
Do MIGO (create and post excise invoice)
Do cancellation of MIGO (102 mvt)
With ref to vendor or internal excise invoice number just post the transaction. excise part 2 entries will get reversed. This will happen only if 102 entry exist for the PO line item.
In a nutshell excise entries cancellation comes only if we cancel the material document. If we do return delivery then we have to create rejection excise invoice.
Hope u get cleared in this regards
Reg
Raja -
HT1918 how to cancel itunes match
How do I cancel this? I emailed this useless **** at apple and she gave me the wrong ansewer. I already did put no renew of itunes match.
anyone know how to cancel this?
Hello Ari,
Lisa here, from iTunes Store Support. I understand that you would like to cancel your iTunes Match subscription. I am sure you are eager to have this issue resolved and I would be happy to assist you today!
Please note that if you have an iTunes Match subscription, you can't change countries until the subscription has expired. Your subscription expires 08/18/2013.
To turn off Auto-Renew for iTunes Match, follow these steps:
1) Open iTunes.
2) From the pull-down Store menu in the menu bar, Choose Store > Sign In.
3) Enter your iTunes Store account name and password, then click Sign In.
4) Go to the Store menu again, Choose Store > View My Account.
5) Enter your account name and password a second time, then click View Account.
You will be taken to your Apple Account Information page. On this page, simply click the "Turn Off Auto-Renew" button next to iTunes Match.
For more information about iTunes Match, visit:
http://www.apple.com/icloud/features/
http://www.apple.com/itunes/whats-new/
I hope this information is helpful! Please let me know if you require any further assistance with your account, as if you do, I would be glad to help. Thank you very much for being part of the iTunes Store family, Ari. I hope you have a great day!
Sincerely,
Lisa
iTunes Store/Mac App Store Customer Support
http://www.apple.com/support/itunes/ww
Thank you for allowing me the opportunity to assist you.
First Name : ari
Last Name : newman
Email : [email protected]
Apple ID (Optional) : [email protected]
Lang_Country : en_AU
Product : iTunes Store
Support Subject : Purchases, Billing & Redemption
Sub Issue : itunes match
GCRM Case ID : 413932684
See additional info below
Choose the iTunes Store or App Store for your country: Australia
Item title: how to cancel itunes match
Order number:
Details:
Hi how do I cancel my itunes match? I dont use and I am moving countries soon. please let me know what I need to do to cancel iTunes Match?
thanks
© 2013 Microsoft
Terms
Privacy
Developers
English (United States)
© 2013 Microsoft
Terms
Privacy
Developers
English (United States)Brian,
Again, not accurate. When Match is "turned off" all of the Matched song instances are still shown in the Ibrary and all devices still stream - so, if you have your songs also stored on your local drive (which I choose to as one does not always have access to WiFi and I use the local instances of the songs for some music production/DJing), iTunes shows each song twice. This is cumbersome if you simply want to play an album - you have to hear each song twice. There is no reason technologically they could not simply show the metadata for a song only once and simply hit the cloud object store when it it is not found as a local disk target. This would solve some of the issues and it is pretty much how any content delivery network (CDN) works - and this is how my local Genius Bar assured me it would work before I bought the service. I found they know little about Match.
Other issues: I believe the "exclusive" Cloud Playtlist logic still stands - iTunes protests if you add a non-Matched song to a Playlist (as it assumes you want all Playlists to be cloudy). Also, the APLCARE person and I could not figure out what "Removed" (under Cloud Status) means despite looking up several explanations on the Web. And, we found songs that were only in the cloud that should have also been on my local drive as I never deleted them. That said, it is also a pain to fully delete a song (local + the cloud). Plus, the logic in the Purchased section around what constitutes "Not On Computer" did not hold up. They have lots of logical challenges with thier workflow.
Regardingyour suggestion, there is no way to "not use" Match. Only when one is disconnected from the iTunes store does Match seem to go away completely.The only thing you can turn off is the song syncing/matching/uploading. This amounts only to turning off a sub-process not the service.
Match is likely fine for most who do not want to have any copy of the songs locally and are fine having access to their music only when connected via WiFi. I wanted more ubiquitous access to my collection from my iPad and my iPhone but needed to keep my songs local to my MBP too. This is not the proper use case as I have learned.
Of course I won't renew, but I should be able to cancel a service that I am dissatisfied with. -
Hi
Recentky I have added a new icloud account to my iPhone 5s but my email is now hacked! so I can't complete the verification procedures. How to cancel the current verification process????plszz help me...Ah thanks Razmee however there is NO option to delete the iCloud account in settings!
-
How to cancel tabbed viewing in Fireworks CS5?
How to cancel tabbed viewing in Fireworks CS5? I don't like tabs, but I couldn't find in Preferences an option to cancel it.
Choose Window > Cascade from the main toolbar.
-
How to cancel an idoc in status 64
How to cancel an idoc in status 64
Hi Manju,
If you have table updation access then
Go to SE16 --> Table EDIDC --> Give your "IDoc number" --> change the status from 64 to "73 IDoc archived".
Or you can ask to your ABAPer to do that.
Hope it helps,
Regards,
MT -
How to cancel email notification from snapshot and simulation
Hi,
We've activated workflow template WS28700001 so that email notification can be triggered when task release. Meanwhile we are using snapshot and simulation at the same time. But when saving sanpshot or simulation the tasks which have status of released also trigger email nofitication. How to cancel this notification of snapshot and simulation?
Regards.Hi Ravi
I have added a Container Element(version) in workflow template WS28700001 and set a workflow start condition as follows.
&Task.Version& = ' '
Regards
Yemi -
Hello, I would like to know how to transfer one of my two "membership" to an other computer because I just bought a new Mac.... ? Or how to cancel it on my old laptop so I can activate it on my new computer. Thanks a lot !
Hi Virginie,
You need to go under the help menu option and sign out from Muse and then install it on the other computer that you want using the creative cloud desktop app.
- Abhishek Maurya
Maybe you are looking for
-
How to do selective delete of the GL a/c, BA and Co Code from the BWrequest
Hi, How to do selective delete of the GL a/c, BA and Co Code from the BW request ?? Regards, Vivek
-
When opening the presort piece information dialog screen and if you click cancel..the software raises an exception error and corrupts your .mdf file. When you try to reopen the .mdf file there is a message box that say's postalsoft cannot find the da
-
Hi Genius, Can we create an interactive report witout using the events Thanks in advance
-
Do not see Business Analytics menu in the dashboard
Hi We ran the ETL load for Project Analytics succesfully. Restarted BI server and BI presentation server. And the dashboard is empty , we still do not see the Business Analytics\Project Analytics menu. Can anyone help Thanks
-
Flash on samsung bada (samsung wave)
I can't find any information about flash 10.1 on bada OS. Someone can tell me if there is any chance that flash will be on bada?