How to capture 2 stereo tracks (4 channels) in Premiere CS6? Thanks!

Problem capturing 2 stereo tracks (4 channels) into Premiere CS6 (on a Mac) from a Canon xls1? Thanks, IndigoJim!

I'm sure I used to get all 4 tracks from my XL1s, If I rememder correctly there was one Avi with a stereo track and a separate wav with the other pair. When in 4 track mode the audio is only 12 bit. The computer I used back then had a Matrox RT100 board, It might have been a Matrox utility that I used for the capture.

Similar Messages

How can I output the alpha channel in Premiere elements 10

How can I output the alpha channel in Premiere elements 10. What format should I use?
Tried outputting to an AVI filet but the file did not contain an alpha channel that After Effects 5.5 would recognize.

Bill,
I hope you ordered 32 GB or more on that new computer After Effects 5.5 takes up as much as it can.
The Roto Brush tool is really a timesaver over ordinary Rotoscoping. Although, my problem now is: when I try to send a 1 min. And 11 second video from Adobe Premier Pro 5.5 two Adobe Media encoder 5.5, the process hangs in wait state in the Media Encoder. I have filed a request for help on the Media Encoder forum.
I know you will put your new computer to use in helping other people and for this I thank you.

How do I install an older version of Premiere CS6

I want to install Premiere CS6 6.0.3 but have 6.0.5 installed. I downloaded the 6.0.3 update from this page:
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
but when I tried to install it I got an error.
How do I install a previous version of Premiere CS6?
Randy

Hi Randy,
Once the file is downloaded and initiate the installation you need to choose start my subscription or start trial and enter your Adobe Id and password
to activate it. If you are using CC you can download, install and activate CS6 product as well with that.
Please use the below link for 6.0 version
http://prodesigntools.com/adobe-cs6-direct-download-links.html
Please make sure to complete the Very Important Instructions section prior to clicking on the download link.
Thanks

How to improve mp4 video quality in adobe premiere CS6????????

please help me,, i want to improve my mp4 video qualitty in adobe premiere CS6 how can I?

What are your source clips exactly (container and codec).
Post a screenshot of your export settings.

How to split stereo track into 2 mono

How to split a stereo audio track into two seperate mono tracks (Left, Right).
(Have searched the manual..)
Bonqui

Also, where you select mono or stereo for a track below the level meter you can click + hold and select L or R. Instead of bouncing, you can convert the files, for me this gives fewer room for error. Also disabling UTM works in some cases, but this is not ideal for every session.
J

How to capture DV video with Date in Premiere CS5?

Hi,
I'm running Premiere CS5 on a Mac (Lion osx 10.7), and for the first time want to transfer a bunch of DV tapes I have recorded over the years. The camera I am using for the transfer is a Panasonic PV-GS250. I would like to be able to transfer over the original date/timecode information in each individual clip so I know when the scene was shot.
Is this possible? I've tried reading through the docs and searched the web, but can't seem to figure out if/how to do this. And/or how to even view that metadata information from within Premiere.
If Premiere is unable to accomplish this, is there a better software that will allow me to capture the video like this?
Thanks,
Eric

Since CS4 (I think...or CS5...) there is the option to display the shot date.
On the bin window click it's context menu button (the upper right one) and choose Metadata display... then choose under Dynamic Media->Shot Date.
If this doesn work with your files, then try the Basic->Date Created choice under metadata too.
This will display on your bin the date of the shooting. It works perfectly with dv tapes captured via firewire. Please note that if the tapes being captured are dubbed tapes, they should be dubbed via firewire too, to maintain metadata. Any other way the metadata will be lost.

I need help. How to export split track for Final Cut Pro 7 Thanks

I need help. I have edited a film and now the company I have made the film for want a split track of it. I have no idea how to export a split track off Final Cut Pro 7 and I need simple language to explain it to me as I am a beginner. Thanks

I assume you have multiple tracks of audio? And the audio is distributed discretely over these tracks (sync sound on tracks 1 and 2, sound effects on tracks 3 and 4, music on tracks 5 and 6 for example)?
Then duplicate your sequence by clicking on the icon for your sequence in the FCP browser and control-clicking on it. From the drop-down menu choose Duplicate. Double click on the duplicate sequence you just created to load it to the timeline and canvas.
Now, working on the copy you just made of your finished sequence, click anywhere on the timeline, and type Command + 0 {zero} to bring up your sequence settings. Click on the Audio Outputs Tab.
Once the Audio Output Tab opens, set the Outputs to the desired number of discrete tracks you want to export - in this case I will set it to 8, as I have sync sound on tracks 1 & 2, Voice Over on tracks 3 & 4, Sound Effects on tracks 5 & 6 and Music on tracks 7 & 8.
Once I do that the 8 tracks appear. I set them all to Dual Mono as I want them to be discrete tracks:
Once I am done, I click OK and return to the far left side of the timeline where the audio selectors are, and carefully control - clicking in the empty space above the lock symbol,
From the drop down menu I assign the output of each track - track 1 to to output track 1, track 2 to output track 2, doing so to each track:
You need to set the output for each track. Once all my track assignments are done, I go to the menu File > Export . . . > QuickTime Movie and export my sequence, but now it is exporting with 8 discrete tracks of audio.
To do a quick check that everything is OK, re-import the movie you just exported back into FCP, and open it in the Viewer and you will see that it does indeed have the multi-tracks, as 8 mono track tabs appear at the top of the viewer.
Now give that QuickTime a name that includes "Split Tracks" in the title and copy it to your delivery drive.
MtD
Message was edited by: Meg The Dog to fix typo

How would I create "bullet point" titles in Premiere CS6, without creating individual titles?

What I mean by "bullet points" is how they did the titles in this video: http://www.youtube.com/watch?feature=player_embedded&v=NHGAEqeXTeY
I know you could do it by creating a different title for each line and then manipulating them on the time line but seems like there should be an easier way to do that. Could someone help me out please? Thanks.

It might be possible to achieve that effect without creating individual titles, however creating a stack of titles is the easiest and most strait forward way.
Create a finished screen 1st, with all the elements that will appear by the end of a title sequence. Click the "new title based on current title" button to create a copy, then delete the last title element on the page, then repeat until you are just left with the 1st element that you want to appear on screen.
Overlay them on your timeline in reverse order of creation, and you have your effect.
That should be the easiest way.
Good luck.

How to import footage from Sony F55 to Premiere CS6?

I'm going to shoot a project on HD with a Sony F55 (not in 2k or 4k). My DoP has given me some test footage, but I am unable to import the footage into Premiere. Can it import native or do I need to download any additional elements?
Thanks, Jason

Thanks. When I try and import the file, right now I just get a green blank screen when the clip comes up. (I have successfully loaded the plug-in). I just dragged and dropped the clip plus its supplementary files into the project, and is said that 3 of the supplementary files weren't compatible (one is .mxf.bmp and one is .BIM). The .mxf clip itself is what appears, but it is just blank. I'm wondering if I'm loading the clip wrong?
Jason

How can i set a default font for premiere cs6

I am hoping to find a way to set a default font for cs6. I work for a company where i need to use Meta book. Every time I create a new title/text slide, i have to change the font to meta book. is there a way to make meta book the font that always comes up(as a default) when i go to create a new title/text
thanks for the help(if there is any)

You set up your font in the Title Properties then go the panel (dropdown) menu of the Title Styles and select New Style.

How to capture selected value from drop down by index

Dear friends,
i want to capture the value of select value from drop down by index, for eg if select air france, how to capture , could any one please let me know
Thanks
Vijaya

Hi Vijaya,
You can get the value of selected from drop down as below
Check out the event handler method attached to Onselect event of the ui element drop down by index , if no event is associated, then create an event and attach to the drop down list
Now you will be having the CONTEXT_ELEMENT in the WDEVENT parameter
               data lo_element type ref to if_wd_context_element.
               lo_element = wdevent->get_context_element( name = 'CONTEXT_ELEMENT').
Now, you can get the static attribute value of selected drop down value & let us say your drop down list values are populated from context node 'ND_DRP_DOWN'
               data ls_data type wd_this->element_nd_drp_down.
                         lo_element->get_static_attributes(
                                   importing
                                   static_attributes = ls_data ).
Hope this helps you.
Regards,
Rama

How many days left with premiere cs6 trial?

how do i know how many days i have left on my premiere cs6 trial version? where does it even indicate that the trial version is a trial version?
thanks in advance!

When you start up the software, It'll indicate how many days are left for the trial. A trial is usually 30 days, and the countdown starts on first launch.
The software is fully functional and the trial is not limited in any way. Only that it'll stop working after the trial period is up. At that stage you can enter a serial number and convert the trial to a licensed version.

How can I extract the two channels from a stereo track?

Hi,
I am writing a class that is able to draw an audio signal. It seems to be working well but I have a question. If I load a mono audio file I am able to draw it on a graph by using the byte[] array and everything is ok until now. That's the code:
void Draw(byte[] x)
            Graphics g=getGraphics();
            Graphics2D g2=(Graphics2D)g;
            g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,                     RenderingHints.VALUE_ANTIALIAS_ON);
            for(int i=0; i<x.length-6; i++)
                g2.draw(new Line2D.Float(((i*(getWidth()-6))/x.length)+5, (getHeight()/2)-          ((x*(getWidth()-6))/x.length), (((i+1)*(getWidth()-6))/x.length)+5, (getHeight()/2)-     ((x[i+1]*(getWidth()-6))/x.length)));
The results is correct only if I have a mono track. Obviously when I get a stereo track the array becomes very large so here the question. How can I extract the two audio channels from a stereo track?
Thanks in advance.
Maurizio Di Vitto

A mono audio stream is stored [sample, sample, sample, sample], so just a list of samples in an array.
A stereo sample is interleaved in the same manner, so you get [left-sample, right-sample, left-sample, right-sample]
So every nth sample is the 1st channel, every nth+1 is the 2nd channel...

How to play back one channel of the stereo track in both headphone cans?

I recorded two microphones in one stereo track. Is there some way I could listen to the left channel and then to the right channel in both cans in my headphones, like a mono track? Panning moves all sound to the left can or the right one in my headphones. But I'd like to listed Left channel as mono channel in both headphone cans, and then press some button and listen to the right channel in both cans. How can I do it?

No problem. By the way, there is a wrinkle in Logic that you may not be aware of.
When dealing with a stereo track, the knob in the channel strip that you may think of as a Pan knob is not. It's a Balance knob. What is does is to change the level of what's in either left or right channel but does NOT move the left signal to the right or vice versa.
To prove this:
* Create a project with two mono audio tracks
* Put different files on each track
* Pan one hard left, the other hard right
* Bounce the result
* Create a new project with a stereo audio track
* Import the audio that you exported above
* Use the Balance Knob to bring either up or down
* Note you cannot move one signal from its original position
If you want to pan a stereo signal, you have to use the insert: Imaging > Direction Mixer. Only then can you position a stereo signal in your stereo field. This is documented in the user manual in the section called: "Setting the Pan, Balance, or Surround Position".
Have fun!
Pete

How to SPLIT ONE STEREO TRACK'S L & R CHANNELS INTO TWO MONO CHANNELS

Does anyone know if this is possible: How to SPLIT ONE STEREO TRACK'S L & R CHANNELS INTO TWO MONO CHANNELS? There's got to be a way, but I just can't find out how.
I recorded a podcast -- me and a guest, with each mic going to its own mono channel. When I opened it in Audition it mixed them into one stereo channel.
Thanks in advance for any help.
Best,
Shawn

You're a big help! Thanks very much. Simple yet I must be going blind because I didn't see that in the menu.
Take care and THANKS AGAIN.
Shawn

How to capture 2 stereo tracks (4 channels) in Premiere CS6? Thanks!

Similar Messages

Maybe you are looking for