How to capture a charateristics value from a selected row in IP

The requirements is to select a line in the summery layout and go to detail layout for further
planning.
In BPS, it's very easy to achieve this, since we can use the variables in the WIB to capture the value of selected line, In IP's query, after click a row, the selected row is highlight, but I am not sure how can we pass the characteristics value of the selected row into a variable. I did the following test by defining a variable for a account number characteristics in the row of a query, and define a dropdown filter with that account variable, after the query is launched in IP, when I click a row in the query, the account number dropdown filter value did not display the corresponding account number I choose. Anybody know how to achieve this?
Thanks in advance

Say your analysis item has 0material as one of the characteristics and say you can bind the material value on the selected line item to variable 'ZMAT' when the user clicks on a button. In the data binding section of the comand you want to perform when button is clicked you will make the fillowing settings:
Variable - ZMAT
Variable Type - 'SELECTION_BINDING
Please give this a try.
Regards

Similar Messages

How do I get the values from a selected row.

I am using JDeveloper 9.0.5. On my page, I have placed a button within a table. The button has been assigned an event. The event is within my Action class. This class implements DataAction and has overriden the
processComponentEvents(DataActionContext actionContext);
method.
Question: While I am within the processComponentEvents method, is it possible to obtain the values of selected row?

Good Morning Jeffery,
First off thanks for your clear explanation. I have a few related questions as noted from your response:
There are two ways to communicate the desired model row between the UIX view and the struts controller. One way is to use the singleSelection component in your table and put your buttons in the singleSelection's contents.
When the user selects the radio button for a particular row and then clicks on one the buttons, a built in event handler in UIX will set the current row in the model to be the user selected row. Therefore, your Struts action can operate on the currently selected model row.
When you drop a UIX table from the data control palette it is automatically set up in this way (with a single selection).
Ok, Lets say that i've set everything up as you described. Not lets say that the button was pressed and I hit the overriddenprotected void processComponentEvents(DataActionContext actionContext) throws IOException, ServletException ;
When I look at the request object, I do not see the values. How do I get access to the rowkey at this point?
Some people, however, want to actually render buttons in their table rows, and have those buttons initiate an action on their row. If you are doing this, then you need to pass the row id to your struts action as a parameter, which means that you need to know the row id when you are rendering a button for a given row. There is an EL expression that will return the row-id for the current row, it is:
${uix.current.rowKeyStr}
which is not so obvious or well documented in the preview release (sorry) but should be for the production release.
A generic code snippet would go a long way to shedding some light on that. I guess I am use to using JDeveloper 9.0.3. It seems,"to me", that JDev 9.0.5 has put a completely new twist on things. I find myself wondering when I can use the 9.0.3 syntax and when
should not. If your team has any short source toys around which demonstrated using rowkeys, or accessing the internal parts of the
struts controller, I would find that invaluable. It dose not matter if this information is documented.
Thank you

Urgent: How to exclude a particular value from the selection in the infopac

How to exclude a particular value from the selection in the infopackage.
Ex: not load for cost center 10000
Thank you,
sam

Hi Sam,
You cannot do this directly as exclusion, but you can include all other values, even as ranges and thus exclude the particular value, else you can also try to do this by writing a routine.
Hope this helps...

I need some syntax help with reading some values from a selected row in an Access form.

My goal: to extract the data from 4 fields in a datasheet row and place them in another form.
My problem: I can only get the field values from the first row of the datasheet.
I have tried using the Form_Click event as the location for the code I've tried. This seems to be the right place, but apparently referring to the desired fields by their names with Me. in front just references the first record in the datasheet, not
the one I've selected.
Should I just read the source form's recordset using the Currentrecord value somehow? I could use some direction on that.
Thank you.
Marj Weir

It's generally considered good forum etiquette to post back a description of the solution which you've reached.
The normal control for a multi-valued field is a combo box rather than a text box, but unless it is necessary for you to use a multi-valued field, i.e. your database is interfacing with SharePoint in the very limited context in which this feature is necessary,
I'd advise that you model the many-to-many relationship type in the time-honoured way by means of a table which resolves the relationship type into two one-to-many relationship types, and use a subform to show the data. You can alternatively use a multi-select
list box or a text box which shows a value list. You'll find examples of all three methods in StudentCourses.zip in my public databases folder at:
https://onedrive.live.com/?cid=44CC60D7FEA42912&id=44CC60D7FEA42912!169
If you have difficulty opening the link copy its text (NB, not the link location) and paste it into your browser's address bar.
Ken Sheridan, Stafford, England

How to store the return value from a select list in page item ?

I'm sorry, I'm sure you will all flame me for this (and its long too :-(. I'm still trying to pick this up and havn't had time to read manual and this forum and up against the clock (as usual), but this must be something thats simple to do, otherwise why have 2 cols on LOV (display text and return value.
normal kind of thing - master /detail, a master table and a detail table, master.id is PK in master, master.name is the name of the master item. detail.id is pk in detail, detail.mid is foreign key to master.id. I have a tabular report that displays a join of cols from master and detail, with 2 cols being links, one is a link on master.name, that passes master.id to page P1 and it displays a row from master. The other col displays detail.name and passes detail.id to page P3, P3 displays a row of the detail table.
I want to populate a LOV with possible master.name values, but display the name of the current P3_MID value (from detail.mid). Then a user can pick a different master and it needs to update P3_MID so on submit it updates the row.
I just can't seem to see in the manual how you can specify where the return value on a LOV goes?
As I said, sorry for long post and not having had time to read docs correctly - someone just point me at the subject matter somewhere, please.

Sorry, I was trying to be to complex and obviously APEX is just too damn cleaver - I figured out how this works - basically APEX pulls the LOV and then matchs the mid to it to display the correct name - simple and easy - just me making it difficult

How can I get the values of the selected row in the report?

Hi All:
I have a dynamic query(lexical parameters)that columns are selected at the run time. And depend on the values, I'd like to do another query just for certain row. For example, when I double click on the fifth column of the fifth row. I'd like to collect all the column values of this fifth row. I think It likes drill-down report, but I don't need a detail report. I just want a string of the combination column's values. Would you please help?
Thanks, in advances, for your help.
TD

Hi:
I got it.
Thx,
TD

How do I pass a value from a selected datagrid row to a popup

I am working on a project tracking application in flex and need to pass the value of one of the rows from the datagrid to a popup. We have a screen with 2 data grids. The first datagrid lists the projects, their start, and end date and the project owner. The datagrid below the first datagrid lists the tasks for that specific project listed in the datagrid above. When you click on the project name above, the datagrid below is populated with the tasks. Within the tasks datagrid are start and end date boxes.
What I need to do is be able to pass the project ID from the original datagrid into a popup that is called when a user changes the date of a project task. The popup is designed to submit a reason for why the user is changing the date on the task. In short, when they submit a reason, I need the project id passed from the datagrid into the popup so when submit is clicked, the proper row in the DB table is update via a CFC. Thank you.

I tried that, but when I try to build the project, I get the error that there is a call to an undefined value. Here is code:
Project Component:
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml"
    width="100%" height="100%" creationComplete="init();" xmlns:mxml="components.mxml.*">
    <mx:Script>
        <![CDATA[
            import mx.events.ListEvent;
            import mx.controls.dataGridClasses.DataGridColumn;
            import mx.rpc.events.ResultEvent;
            import mx.managers.PopUpManager;
            import mx.core.IFlexDisplayObject;
            import components.mxml.NewProject;
            import components.mxml.NewTask;
            import components.mxml.dateChangeNotice;
            import mx.controls.Alert;
            private function init():void{
                roGetData.getProjects();
                //roGetData.getTasks();
            private function projectClick(event:ListEvent):void{
                //Alert.show(dgProjects.selectedItem.projectID);
                roGetData.getTasks(dgProjects.selectedItem.projectID);
            private function refreshProjects(event:MouseEvent):void{
                roGetData.getProjects();
            private function ResultEvent_Projects(event:ResultEvent):void{
                dgProjects.dataProvider = event.result;
            private function ResultEvent_Tasks(event:ResultEvent):void{
                adgTasks.dataProvider = event.result;
            private function ResultEvent_UpdateTasks(event:ResultEvent):void{
                Alert.show('Your task was updated');
            private function showNewProject():void{
                var newProjectWindow:IFlexDisplayObject =
                    PopUpManager.createPopUp(this, NewProject, true);
                newProjectWindow.addEventListener(MouseEvent.CLICK, refreshProjects);
            private function showNewTask():void{
                var newTaskWindow:IFlexDisplayObject =
                    PopUpManager.createPopUp(this, NewTask, true);
            private function dateFormat(item:Object, column:DataGridColumn):String{
                return dateFormatter.format(item[column.dataField]);
                //Function calls the Reason popup window
            //private function changeReason():void{
                //Create Popup Window
                //var resultWindow:IFlexDisplayObject =
                //PopUpManager.createPopUp(this, dateChangeNotice, false);
        ]]>
    </mx:Script>
    <mx:RemoteObject id="roGetData" destination="ColdFusion" source="projectTracker.components.cfc.controllers.getController">
        <mx:method name="getProjects" result="ResultEvent_Projects(event);" fault="Alert.show(event.fault.faultString);" />
        <mx:method name="getTasks" result="ResultEvent_Tasks(event);" fault="Alert.show(event.fault.faultString);" />
    </mx:RemoteObject>
    
    <mx:DateFormatter id="dateFormatter" />
    <mx:HBox width="100%">
        <mx:Label text="Projects:" />
        <mx:Button label="Insert New Project" click="showNewProject();"/>
    </mx:HBox>
    <mx:Panel width="100%" height="45%" title="Projects">
        <mx:DataGrid id="dgProjects" width="100%" height="100%" itemClick="projectClick(event);" dataProvider="">
            <mx:columns>
               <mx:DataGridColumn dataField="projectID" headerText="ProjectID" visible="false" />- I Need to pass this value
                <mx:DataGridColumn dataField="name" headerText="Project" />
                <mx:DataGridColumn dataField="startDate" headerText="Date Started" labelFunction="dateFormat" />
                <mx:DataGridColumn dataField="endDate" headerText="Completion Date" labelFunction="dateFormat" />
                <mx:DataGridColumn dataField="description" headerText="Description" />
                <mx:DataGridColumn dataField="statusName" headerText="Status" />
                <mx:DataGridColumn dataField="ownerName" headerText="Owner" />
            </mx:columns>
        </mx:DataGrid>
    </mx:Panel>
    <mx:Panel width="100%" height="45%" title="Project Tasks">
        <mx:AdvancedDataGrid id="adgTasks" width="95%" height="100%" variableRowHeight="true">
            <mx:columns>
                <mx:AdvancedDataGridColumn dataField="taskID" visible="false" width="50" />
                <mx:AdvancedDataGridColumn dataField="name" width="25" />
                
                <mx:AdvancedDataGridColumn id="descript" dataField="description" headerText="Description" width="50"/>
                <mx:AdvancedDataGridColumn dataField="ownerID" headerText="Owner" width="25" />
                <mx:AdvancedDataGridColumn dataField="notes" headerText="Project Notes" width="50"/>
                <mx:AdvancedDataGridColumn dataField="Dates" headerText="Dates" width="50"/>
            </mx:columns>
            <mx:rendererProviders>
                <mx:AdvancedDataGridRendererProvider dataField="taskID" columnIndex="5">
                    <mx:renderer>
                        <mx:Component>
                            <mxml:dgDateHSlider startDate="{data.startDate}" endDate="{data.endDate}"/>
                        </mx:Component>
                    </mx:renderer>
                </mx:AdvancedDataGridRendererProvider>
            </mx:rendererProviders>
        </mx:AdvancedDataGrid>
    </mx:Panel>
    <mx:HBox width="100%">
        <mx:Label text="Tasks:" />
        <mx:Button label="Insert New Task" click="showNewTask();"/>
        <mx:Spacer width="200"/>
    </mx:HBox>
</mx:VBox>
Popup Components
<?xml version="1.0" encoding="utf-8"?>
<mx:TitleWindow xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" width="400" height="400" title="Reason for Date Change" backgroundColor="#E5E4E4">
<mx:Script>
    <![CDATA[
             import mx.events.ValidationResultEvent;
            import mx.rpc.events.ResultEvent;
            import mx.managers.PopUpManager;
            import mx.core.IFlexDisplayObject;
            import components.mxml.NewUser;
            import mx.controls.Alert;
            import components.mxml.Projects;
            import components.mxml.NewTask;
        //Clear Text Area Function
       public function Clear():void{
            reasonText.text = "";
        //function to send notes to db via RO
        public function writeNotes():void{
into here-->    updateReason.reasonUpdate(taskID.selectedItem,reasonText.text); taskID.selectedItem is not recognized. It errors on compile
        //remote object Results Event
        public function reasonResult(event:ResultEvent):void{
            Alert.show("Label update successful, thank you!");
            Clear();
    ]]>
</mx:Script>

<mx:RemoteObject id="updateReason" destination="ColdFusion" source="projectTracker.components.cfc.controllers.createController">
    <mx:method name="reasonUpdate" result="reasonResult(event);" fault="Alert.show(event.fault.faultString);"/>
</mx:RemoteObject>

    <mx:TextArea x="19" y="60" width="90%" height="246" maxChars="1000" wordWrap="true" enabled="true" id="reasonText"/>
    <mx:Button label="Update" click="writeNotes()" right="65" bottom="0"/>
    <mx:Button label="Exit" click="PopUpManager.removePopUp(this);" right="10" bottom="0"/>
    <mx:Text text="Please Specify your reason for changing the dates of this task." width="90%" fontWeight="bold" top="10" horizontalCenter="0"/>
</mx:TitleWindow>

Get the value from a selected row in a table

Hi all,
My table contains a tree structure.
When I select a single row, I need to get the value of a particular column.
I created an action on the leadSelect of the table and gave the following code:
public void onActionleadValue(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionleadValue(ServerEvent)
    String strLeadValue = wdContext.nodeAttribute_View_Out().currentAttribute_View_OutElement().getAttributeAsText("<MyModelAttributename>");
    wdComponentAPI.getMessageManager().reportSuccess("selected lead value "+strLeadValue);
    wdContext.currentContextElement().setLeadselectedvalue(strLeadValue);
    //@@end
My Bapi returns me 6 records. and when I click on any row its always pointing to the last record value.
What could be the problem?
Thanks
Anjana

Hi Anjana,
Try this.
try
     IWDMessageManager msg = wdComponentAPI.getMessageManager();
     int leadselect = wdContext.nodeSChild1().getLeadSelection();
      for(int i=0;i<wdContext.nodeSChild1().size();i++)
          if(leadselect == i)
          //Displaying output in diff table
//           IPublicTestComp.ITableNodeElement tabelm = wdContext.createTableNodeElement();
//           tabelm.setAttribute1(wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute1());
//           tabelm.setAttribute2(wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute2());
//           tabelm.setAttribute3(wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute3());
//           wdContext.nodeTableNode().addElement(tabelm);
          String att1 = wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute1();
          String att2 = wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute2();
          String att3 = wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute3();
                 msg.reportSuccess("Row ("i") : "att1"====="att2"======"+att3);
} catch (WDDynamicRFCExecuteException e) {
     wdComponentAPI.getMessageManager().reportException("Message : "+ e.getMessage(),true);
Regards,
Mithu

How to capture a parameter value in SQL QUERY of scale marker using GO URL

Hi,
Can any one please tell me how to capture the parameter value from go url inside Where clause of Scale Marker.
I am trying to sift the position of scale marker based on SQL Query.
Thanks-Bhaskar Gouda.
Edited by: 961171 on Sep 25, 2012 12:33 AM

Since this is a synchronous interface, where source is a soap(proxy) call and target is JDBC in the first mapping both of them are request scenarios.
Source Structure:
RootNode
    Request             1...unbounded
       No_of_Days   1.1 String
Target Structure:
RootNode
   Statement
     TableName
         Action mapped to SQL_QUERY
        Access - SELECT DISTINCT AL.EC_NO,DP.DATE_TO_FORMAL FROM T_APPLICATION_LIST AL,(SELECT DE.EC_NO AS "EC_NO", DE.PACKAGE_NO AS "PACKAGE_NO",PC.DATE_TO_FORMAL AS "DATE_TO_FORMAL" FROM DAICYO_ECNO DE,PACKAGECTL PC WHERE DE.PACKAGE_NO = PC.PACKAGE_NO AND PC.DATE_TO_FORMAL > (TRUNC(SYSDATE) - to_number('$No_Of_DAYS$'))) DP WHERE AL.EC_NO IN (SELECT EC_NO FROM DAICYO_ECNO WHERE PACKAGE_NO IN (SELECT PACKAGE_NO FROM PACKAGECTL WHERE DATE_TO_FORMAL > (TRUNC(SYSDATE) - to_number('$No_Of_DAYS$')))) AND (AL.FAMILY = '' or '' is null and AL.FAMILY is not null ) and DP.EC_NO = AL.EC_NO ORDER BY DATE_TO_FORMAL
     Key
      No_Of_Days   1..1 String
In Return I am expecting a JDBC response from the Oracle Database as:
Source Structure:
RootNode
STATEMENT_response   1...unbounded
     row                               0...undbounded
       EC_NO                        1..1   String
Target Structure:
RootNode
RESPONSE
    row
     EC_NO                     1..1     String

How can i get all values from jtable with out selecting?

i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
raja

You could set the table's data model to be the same:
output2.setModel( output1.getModel() );

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How to check if all values from a dataset has come to an internal table

How to check if all values from a dataset has come to an internal table ?

Hi,
After OPEN DATASET statement check if sy-subrc = 0 if its success then proceed with split statement and save the dataset values into a internal table and while debugging the internal table you will find that whether all values get into internal table.
Checking sy-subrc after OPEN DATASET statement is must to fill up the values in the internal table.
For e.g.
OPEN DATASET p_inpfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
    WRITE :/ 'No such input file' .
    EXIT.
ELSE.
READ DATASET p_inpfile INTO loc_string.
      IF sy-subrc NE 0.
        EXIT.
      ELSE.
        CLEAR loc2.
*Spliting fields in the file-
        REPLACE ALL OCCURRENCES OF '#' IN wa_string WITH ' '.
       SPLIT wa_string AT const INTO loc2-pernr
                                       loc2-werks
                                       loc2-persk
                                       loc2-vdsk1.
Hope you get some idea.
Thanks,
Sakthi C

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

How do I return two values from a stored procedure into an "Execute SQL Task" within SQL Server 2008 R2

Hi,
How do I return two values from a
stored procedure into an "Execute SQL Task" please? Each of these two values need to be populated into an SSIS variable for later processing, e.g. StartDate and EndDate.
Thinking about stored procedure output parameters for example. Is there anything special I need to bear in mind to ensure that the SSIS variables are populated with the updated stored procedure output parameter values?
Something like ?
CREATE PROCEDURE [etl].[ConvertPeriodToStartAndEndDate]
@intPeriod INT,
@strPeriod_Length NVARCHAR(1),
@dtStart NVARCHAR(8) OUTPUT,
@dtEnd NVARCHAR(8) OUTPUT
AS
then within the SSIS component; -
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Below execute statement should work along the parameter mapping which you have provided. Also try specifying the parameter size property as default.
Exec [etl].[ConvertPeriodToStartAndEndDate] ?,?,? output, ? output
Add a script task to check ssis variables values using,
Msgbox(Dts.Variables("User::strExtractStartDate").Value)
Do not forget to add the property "readOnlyVariables" as strExtractStartDate variable to check for only one variable.
Regards, RSingh

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

How to capture a charateristics value from a selected row in IP

Similar Messages

Maybe you are looking for