How to Capture a UEFI Image Using ImageX

Is there any special steps needed to capture a UEFI Windows 7 or 8 Image? Do I need to capture all partitions or just the Windows Partition?
I have found articles describing how to apply the image but not how to capture it.
Yeah Buddy!

Hi,
Here are 2 ways to capture the image,
1st using Windows Deployment Server,
http://www.petenetlive.com/KB/Article/0000735.htm
2nd using Imagex my  Step
by Step Guide
Please bear in mind, that my answer is based on the details given in your post. The more I get the better the answer, Slan go foill, Paul

Similar Messages

  • How to print uspto patent images using Safari and Quicktime

    3/18/06
    Do you want to know how to print US patent images using Safari? Read on.
    When you access the "images" link of a specific patent on the www.uspto.gov/ website using Safari, the page you are viewing is only one small upper left tile of a huge patent image that is not sized to the screen. You can scroll and try to read the page but it's almost impossible. Try to print it out and you only print what's on the screen. Bummer.
    The fix:
    Place the cursor on the opened image (it may appear blank), hold down the CONTROL key on you keyboard and click on the image. Two instructions come up. Click on the "Save Image to the Desktop" instruction and a DImg.tiff file will be created on your desktop. Click on the .tiff file and it should open in the Preview program, then simply print out the image. Voila!!!!
    Click the yellow arrow in the left margin to access page 2 of the patent and repeat the previous instructions to create another .tiff file on your destop. Do every page and you'll have the patent available to print out one page at a time.
    You can then rename the files and create a folder for that specific patent so you can access it later without signing onto uspto site.
    It's odd that the ever compatible Apple does not provide seamless compatibility to view and print patent images on the US Patent and Trademark Office's website. Where would they be without protecting their own intellectal property? Let's hope the next version of Quicktime includes the appropriate ITU T.6 or CCITT Group 4 (G4) compression language.
    Even the "throw it out the Windows" operating system is up to speed on this issue for America's hard working inventors.
    Keep on inventing.
    Tommy K
    imac 400 DV   Mac OS X (10.3.9)   Cube 450
    imac 400 DV   Mac OS X (10.3.9)   Cube 450

    Another similar thread on this issue...
    http://discussions.apple.com/thread.jspa?messageID=1602391

  • How to get muliple teaser images using assetset:getmultiplevalues?

    1. I have created a template called sample and Names it as sample.jsp
    2. In the subTypes i selected a pageDefinition which i created alrady with the following page attributes
         1.teaserImager 2.teaserText
         Both attributes are Multiple
    3. I then created a asset HomePage of asset type Page.
    4. For that HomePage i applied a template sample which i created in Step 1.
    5.I added 4 teaser images and teser texts in the contributor interface
    6. In eclipse i am trying to modify sample.jsp to fetch the teaser images using assetset:getmultiplevalues. But no success?
    Could anybody tell me how to fetch the teaser images using getmultplevalues?
    Below is the code which is not working, just for ref.
    <render:logdep cid='<%=ics.GetVar("tid")%>' c="Template" />
    <assetset:setasset name="home" type="Page" id='<%=ics.GetVar("cid")%>' />
    <assetset:getattributevalues name="home" attribute="teaserImages" listvarname="teasersImg" typename="PageAttribute" />
    *<assetset:getmultiplevalues name="home" list="teasersImg" prefix="sample" />*
    *<ics:listloop listname="sample:value">*
                   *<insite:calltemplate tname="Detail" c="AVIImage"*
                        cid='<%=ics.GetVar("imageId")%>' assettype="Page"
                        assetid='<%=ics.GetVar("cid")%>' field="teasersImg" index="1" />
              *</ics:listloop>*
    Above code gives me the exception saying
    Exception in doEndTag() in tag com.openmarket.gator.jsp.assetset.Getmultiplevalues in page 'avisports/Page/InsiteLayout' in element 'Page/InsiteLayout' errno: -13102 errdetail: 0
    com.openmarket.basic.interfaces.AssetException: Can't find attribute type: 1330543072207
    thanks
    Sri
    Edited by: 987672 on Feb 12, 2013 12:15 PM

    Hi Nick, I do see information on creating a slideshow with Quicktime at: http://www.apple.com/quicktime/tutorials/slideshow.html
    however it appears Quicktime X removed that capability. There is no 'open image sequence' option from the File menu in Quicktime X.
    If I do end up sticking with Final Cut - would you recommend any codec and/or dimension size that would result in the best quality or the most crisp image? I also need a few fade in's and out's on various parts - I don't believe I would have the control without Final Cut.
    Would resizing the image files in Photoshop to 1920 pixels by 1280 before importing them into Final Cut result in crisper images? Thanks.

  • How to create dvd/cd image using super drive in MacBook Air

    I have MacBook Air and also Apple Supper drive for the same. can u help me to find dvd/cd burrning and copy software. and also guide me "how to create dvd/cd image using super drive in MacBook Air"

    First to create a video DVD you need to use DVD authoring software like iDVD.  You can purchase it from the online Apple Store while supplies last.
    For creating a disk image use Disk Utility.
    To burn items to a CD or data DVD just insert the disc in the optical drive and drag those items onto the disc icon on the Desktop.  Then drag the disc icon to the Trash icon in the Dock which changes to a Burn icon.
    OT

  • How to capture a screen by using robot class

    how to capture a screen by using robot class

    open the apidocs for the Robot class
    read the methods - you won't get far when one of the methods will stand out
    if you can't get it working, copy the method name and paste it into the 'search forums' box,
    where you'll find plenty of sample code

  • I would like to know how to stretch a background image using HTML

    Hello Seniors of Sun,
    I gota small doubt in HTML, can any one please help me in solving it,
    I would like to know how to stretch a background image using HTML? I have tried and tried to figure this out and cannot..
    so any one kindly help me in this...
    waiting for reply...

    Please note that this is not an HTML forum.
    You can use an image tag on a DIV positioned behind the rest of the page, so that could actually work. And if you want to use body:background, then look up an HTML/CSS reference and see if there are any other body attributes or CSS stuff that applies to the background image.

  • Image display - How do I display an image using an absolute path?

    How do I display an image using an absolute path in a compiled WebHelp?
    Our developers use RH8 map IDs within our in-house applications to display in a model window created using Telerik Rad Window.
    Unfortunately images disappear from these model windows because RoboHelp removes absolute links to [inserted] images and changes them to relative in the compiled WebHelp.
    How do we overcome this? Is there a solution in RH8?

    I have tried again and changed the path in the topic HTML
    from : ..\..\HelpTopics\Icon_Search.png
    to    :  \HowDoI\Help_CMS\WebHelp\HelpTopics\Icon_Search.png
    I am obviously unable to see it in RH8 as I have removed the relative link so it is "outside" of the project.
    This time, on compilation, it has not stripped out the absolute links. The developer was working with me on this last week and we did have any issue in that they did not hold the absolute link. Most odd!
    Checking the published help it appears to be working in the application, which is great.
    So my apologies for raising the issue but it really did not work last week.

  • How do I change the image used on an movie project icon? iMovie seems to select an image at random from the images I imported.

    How do I change the image used on an movie project icon?
    iMovie seems to select an image at random from the images I imported.

    Not sure I understand how to use what you have posted. Here's what my init() looks like:
    public void init()
    setLayout(new BorderLayout());
    p=new Panel();
    p.setLayout(new GridLayout(1,1));
    callnowButtonURL = getURL(callnowButtonFilename);
    if (callnowButtonURL != null)
    callIcon = new ImageIcon(callnowButtonURL,"call");
    endcallButtonURL = getURL(endcallButtonFilename);
    if (endcallButtonURL != null)
    endIcon = new ImageIcon(endcallButtonURL);
    b=new JButton(callIcon);
    b.setBorder(new EmptyBorder(0,0,0,0));
    b.setBorderPainted(false);
    b.addActionListener(this);
    p.add(b);
    add(p,"Center");
    Now the ActionListener is basically:
    public void actionPerformed(ActionEvent e)
    if (mybool == false)
    <Perform actions here set mybool to true>
    Change JButton b to use EndIcon
    else
    <Perform actions here set mybool to false>
    Change JButton b to use CallIcon
    Can you clarify how to perform the action I require? You can have a couple of Dukes if you can help me sort this out.

  • How do I save an image using image capture after i scan a document?

    How do I save an image in image capture, after I've scanned a document?

    Hi, and welcome to Apple Support Communities.
    The process may differ a bit, depending upon which version of the OS you are using. Open the Image Capture application and click on the Help menu for it.
    In Mac OS X 10.6.8, I get this:
    Control + click on image and choose to "Open Link in New Tab" (or window) in order to see the full-size image.
    According to those instructions, it looks as though the scan should be automatically saved to the folder you've chosen.

  • Error applying an image using imagex

    Hello,
    I get the following error messages only when applying image to a destination computer. If I reapply the image on the source computer I do not get these errors, please help.
    F:\>imagex /apply I:\x201win7x64.wim 1 W: /verify
    ImageX Tool for Windows
    Copyright (C) Microsoft Corp. All rights reserved.
    Version: 6.1.7600.16385
    [   0% ] Applying (with verification) progress
    [   0% ] Applying (with verification) progress
    [   1% ] Applying (with verification) progress
    [ ERROR ] W:\MSOCache\All Users\{90120000-0011-0000-0000-0000000FF1CE}-C\ProPlsWW.cab (Error = 577)
    Error restoring image.
    Windows cannot verify the digital signature for this file. A recent hardware or
    software change might have installed a file that is signed incorrectly or
    damaged, or that might be malicious software from an unknown source.
    I took off the /verify switch from the command to see if there was any difference and I get the following errors.
    F:\>imagex /apply I:\x201win7x64.wim 1 W: 
    ImageX Tool for Windows
    Copyright (C) Microsoft Corp. All rights reserved.
    Version: 6.1.7600.16385
    [   0% ] Applying progress
    [   0% ] Applying progress
    [   1% ] Applying progress
    [   2% ] Applying progress: 29:24 mins remaining
    [   3% ] Applying progress: 27:58 mins remaining
    [   4% ] Applying progress: 25:01 mins remaining
    [   5% ] Applying progress: 22:23 mins remaining
    [   6% ] Applying progress: 19:50 mins remaining
    [   7% ] Applying progress: 17:46 mins remaining
    [   8% ] Applying progress: 16:06 mins remaining
    [ RETRY ] Restoring W:\Program Files (x86)\Adobe\Reader 10.0\Reader\plug_ins\Annots.api again (Error = 1392)
    [ RETRY ] Restoring W:\Program Files (x86)\Adobe\Reader 10.0\Reader\plug_ins\Annots.api again (Error = 1392)
    [ RETRY ] Restoring W:\Program Files (x86)\Adobe\Reader 10.0\Reader\plug_ins\Annots.api again (Error = 1392)
    [ RETRY ] Restoring W:\Program Files (x86)\Adobe\Reader 10.0\Reader\plug_ins\Annots.api again (Error = 1392)
    [ ERROR ] W:\Program Files (x86)\Adobe\Reader 10.0\Reader\plug_ins\Annots.api (Error = 1392)
    Error restoring image.
    The file or directory is corrupted and unreadable.
    I captured the image using /check / verify switches and returned successful image capture with no errors.
    Please help!

    I'm going to try and bring this thread back from the dead.  Buckle up, long post ahead.
    Did you ever determine for sure that the issue was a system board?  I'm having a very similar issue with a machine. 
    I am trying to apply an image to a customer machine using ImageX, but keep running into error 1392.  This error would flag a different file every time, but always at 45-49% completion. 
    The image was provided by the customer in a PE image which was ghosted to multiple flash drives.  We have successfully applied the image to over 400 machines by first using disk part to clean the disk and create one ntfs partition.  We then run "Imagex.exe
    /apply path_to_customer_image.wim 1 C:"
    That is where this machine would find its hangup and spit out an imagex error 1392.
    My initial reaction was to replace the HDD, so I did.  The issue was not resolved, so I tested the ram and CPU with no change.  I replaced the system board with a brand new one, and the issue persists!!  This is basically a new machine by now,
    so I've pretty much ruled out hardware related possibilities.
    Curious as to the customer's specification on creating just one partition in preparation for imaging, I experimented a little.  I shredded the HDD in Parted Magic and used its partition editor to ensure there were no existing partitions.
    Using Disk Part from X: on the imaging flash drive, I cleaned the HDD (why not?) and created an initial ntfs partition of 100mb.  I labeled it "system" and assigned it letter S.  I then created a second ntfs partition of the remaining space,
    labeled it "windows," and assigned it letter C.  This partition I marked as active.
    I then ran chkdsk to scan for any possible drive errors. 
    This time, running Imagex, the process made it to 77% before failing with error 1392 (again, a seemingly random file).  Seeing as how the failures were previously consistently between 45% and 49%, I figured I was on to something.  I repeated all of
    the disk prep steps above, making the "system" partition 500mb this time. 
    ImageX was a success!!  100% of the WIM was applied and I received no errors.  Fantastic. 
    I went to boot the machine and received an error that the boot files were missing.
    I booted back into the PE drive and tried running bcdboot to pull boot files and apply to my active OS partition at C:, but I received another error stating that there was a failure attempting to transfer the boot files.  I ran again in verbose and received
    an error code.  I cannot remember the error code for certain (I am currently cleaning the HDD), but according to my Google history, it was 0xc1. 
    Any ideas??  The machine is an HP EliteBook 8470p.
    Update:  Parted Magic just crashed twice attempting to wipe the hard disk.  Once running from RAM, the second time running live from the USB.  This is new....

  • How to make an icon image using Photoshop

    I found out how to do this recently so I decided that I wanted to make a tut for those who don't know how to make an icon image. This icon image is for the libraries tab on your computer. Under the libararies tab there is Music, Pictures, Documents, and Photos
    First you will need the ICO (Icon image format) Format extension for photoshop which can be downloaded here:
    http://www.telegraphics.com.au/svn/icoformat/trunk/dist/README.html
    The download link and tutorial on how to install it is all in the link above.
    Once you have that all set you can now launch photoshop to create your icon image. Once you have launched it, create a new document with the size as in the image below.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/256x256_zpsbf3dcf8e.png~original[/IMG]
    Create the image you want. I used a simple one by using the custom shape tool by pressing "U" on your keyboard and with the
    basic blending options.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/IconImage_zpsd788c709.png~original[/IMG]
    The reason why the image is pixelated is because it is an icon image. Since the image is only 256x256 pixels when you zoom in on it that will get you the pixely result. The reason why I zoomed  in is so you can see it. But don't worry this is no the end result. Just continue reading and you will see.
    So once you have created the icon go ahead and press
    file>save as>(under format choose the ICO)>and choose the name that you want to name it. And save it in your C: drive. You will see why to save it in your C: drive in a sec.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/SampleicoPic_zpsd252bfba.png~original[/IMG]
    So now that you have created the icon and saved it now you can create the new library.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/NewLibrary_zps8ca703b2.png~original[/IMG]
    Name the library whatever you want I named it "Sample" for tutorial purposes. Notice how it gives you a default boring icon image for your library.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Sample1_zpsb5472840.png~original[/IMG]
    So now once you have created and named your library now it is time to get the icon image into place.
    Go to computer/c: Drive/users/YOU/ And now once you have reached this area you will need to access a hidden folder named "appdata" to do so press "Alt" then a menu bar will show. Click
    tools>folder options>and view. Find the option to view hidden folders then press apply then ok. Now we shall continue so AppData>Roaming>Microsoft>Windows>Libraries
    Now you should see all the libraries including the one you just created.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/showhiddenfolder_zpsad4a3c94.png~orig inal[/IMG]
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Libraries_zpsf6243bc0.png~original[/IMG]
    Once you have reached your destination then open a new text document with notepad and drag the library you just created in notepad. The result should look like this:
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Notepad_zps251a86f0.png~original[/IMG]
    once you have reached this point click at the end of the second to last line down then press enter and enter in this information
    <iconReference>c:\"NAME OF ICO FILE YOU CREATED IN PS".ico</iconReference>
    Example:
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/iconreference_zps1c1a3eca.png~origina l[/IMG]
    Once you have entered that information go to file>save and the icon image should appear on the library you created.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Finished_zps267f893a.png~original[/IMG]
    Now you are officially finished. Go and spread the news and joy. Bye for now
    -Dusty951512

    It is Windows only because all those screen shots are exclusively Windows, the file structure and paths do not resemble those of the Mac in the least.  As a Mac user, there's nothing I could take from your tutorial.  Sorry, 
    No drives named with letters like C: on the Mac, for instance.  No backward slashes either, ever.  No such paths either.  No "Notepad" on the Mac, we use TextEdit; but such a text editor is not remotely needed on the Mac to make and/or edit icons.  Etc.
    Those folders are not even called "Libraries" on the Mac…  Nothing resembling your tutorial at all.
    The icons in the Finder's Sidebar are not customizable at all in recent version of OS X.
    =  =  =
    You can edit any post of yours only until someone replies to it.  At this time your post is not editable by you any longer.

  • How to capture JPEG files by using camera

    Hi, now I have a problem, I need your help, I am trying to use a camera that capture JPEG files from camera, I have used those related classes(JMF), but I still can not capture any JPEG files from it.
    Although there are some examples about the video capture(just for mov or avi files), it does not mention how to capture JPEG files.
    Thank you for your help!

    I have the same problem.
    please,help us.

  • How to  upload and display image using bsp application

    hi
    I  just wants to know that
    1- how to  upload image from BSP page with attachment into sap server .?
    2-how to display image in to BSP page(webpage).
    thanks

    Hello Gupta Prashant,
    Just to upload and display an image, import image in MIME repository. Not only still images but also flash files can also be uploaded in the MIME repository. Once you import the image in it, use normal html code for image call;
    <img src = "file.jpg/gif" width=  height=>
    Besides it, if your requirement is to store the image in the database and fetch it based on specified field-name, then you have to go for BLOBs i.e Binary Large Object, using this you can also store images, videos, pdfs, applications in the database.
    MBLOB - Medium BLOBs store videos and pdfs,
    LBLOB  - Large BLOBs store movie files and applications.
    You have got 2 ways to use it; some databases store BLOB objects into themselves and some store the path of the BLOB object maintained on the FTP server.
    You can also implement it in ABAP;
    read the following link and practice the tutorial;
    [ Use of MIME Types|http://help.sap.com/saphelp_45b/helpdata/en/f1/b4a6c4df3911d18e080000e8a48612/content.htm]
    also check this
    [TYPES - LOB HANDLE|http://help.sap.com/abapdocu/en/ABAPTYPES_LOB_HANDLE.htm]
    And looking at your question, in order to upload an image, you can make use of FILEUPLOAD tag provided by HTMLB.
    Step 1: FILEUPLOAD provides a browse button to choose desired image file.
    Step 2: Store that image in database using BLOBs.
    Step 3: Retrieve the image using normal select query and display it on the screen.
    Hope it helps you,
    Zahack

  • How to capture SOAP fault when using "Do not use SOAP envelope" parameter

    Hi,
    we have a synchronous  RFC -> XI -> Web Service scenario. The Web Service requires some custom SOAP header elements for user authorization which forced us create the entire SOAP message in a message mapping and to set the "Do not use SOAP envelope" parameter in the receiving SOAP adapter.
    In order to capture the SOAP fault message from the Web Service we have created a message interface with a fault message and also created an interface mapping with a fault message mapping.
    Our problem is that the fault message is not populated when we get a SOAP fault message back from the Web Service. Is this due to the fact that we have set the  "Do not use SOAP envelope" parameter?
    Thanks in advance!
    Stefan
    Message was edited by:
            Stefan Nilsson

    Hi Bhavesh,
    I have exaactly same scenario. But the only difference is that the Successful payload is also not coming into PI.
    The request is successfully hittng the webservice.
    Please guide me on how to capture the paylod.
    I am using the WSDL provided by the thirdparty but sill the message is not coming into PI.

  • How Secure Is A Disk Image Using AES-128 Encryption ?

    I want to make encrypted disk images using Disk Utility.
    How secure will they be ?
    Good enough for state secrets ?
    Can the encryption be broken ? If so, how easily ?
    Could the average hacker break it easily or with great effort over a long period ?
    Or would it take a team of government type experts ?
    Ian the Paranoid.

    I would say encrypted disks are a safe option.
    However, with the coming rise of quantum computers, in the wrong hands, encryption for the near future will be all but nullified.
    Some safe measures to take for making your computer safer include: Changing your router's password, enabling firewall, reverse firewall, FileVault (make sure you don't lose your paswords) Firmware password, encrypted mail service, (If available from your ISP).
    These are just some of the obvious. There's more and I haven't used them all. But, it just helps to be informed and work with what you can.

Maybe you are looking for