How to capture DV-NTSC material with 12bit audio ?

Does anybody have the solution ?

In the Final Cut Pro Menu select Audio/Video Settings
select the capture preset tab
DV NTSC is probably selected.
click on the edit button
click OK to make a copy
in the QT Audio settings select capture first two channels, second two channels or mix channels.
This is the first time I looked at it in FCP 5, in 4.5 there was an advanced button there that allowed you to select channels and also preview the sound.
When it captures, it's going to convert to 16bit. You may have to experiment a bit to get what you want. Capture 15 seconds and see if you are getting what you want.
I'm assuming you are capturing from 12bit because you recorded onto all 4-channels of the DV tape. In the past, I've had to make sure all my audio for the first 2-channels captured to the left side, and second two channels to the right side, then when I mixed two channels in capture, i would have seperate audio. But mixing the two channels may mix audio from the Left on channel one with audio on the left from channel 2, instead of mixing L & R from channel one to the left of the captured channel. Sheesh...
Anyway, it may take some experimenting...

Similar Messages

  • Reg: How to capture the Excise Invoice with respect to Inbound delivery

    Hi All,
    Please give the process follow for capturing the excise invoice with respect to inbound delivery.
    Thanks & Regards
    Siva

    Hi Siva,
    Please check this link
    CIN with Example..?
    Regards,
    Bijoy Kumar

  • How do I import AVI video with stereo audio (and keep it that way)?

    Today I just discovered that all the AVI video with stereo audio I've ever imported into a Premiere Pro CS6 project has been mysteriously converted to mono. And I can't find any import setting anywhere that enable me to change this.
    Here's the deal...
    I've have an AVI file with stereo audio (the file is actually a stereo sound test that I downloaded to prove that I wasn't imagining things). On my hard drive, I right-click and view the properties:
    Video
    Length: 00:00:36
    Frame width: 320
    Frame height: 240
    Frame rate: 25 frames/second
    Audio
    Bit rate: 128kbps
    Channels: 2 (stereo)
    Audio sample rate: 44 kHz
    I click on it to play and listen with headphones--everything is playing in the correct part of the stereo spectrum. Then, I import it to Premiere, click the file name in the left content menu, and check the properties, suddenly they read:
    Type: AVI Movie
    File Size: 1.1 MB
    Image Size: 320 x 240
    Frame Rate: 25.00
    Source Audio Format: 11025 Hz - 16 bit - Mono
    Project Audio Format: 11025 Hz - 32 bit floating point - Mono
    Total Duration: 00:00:36:15
    Pixel Aspect Ratio: 1.0
    Sure enough, I drag it into the sequence, listen to it, and it's indeed playing mono. Outside of Premiere, the original source file still reads and plays correctly with stereo sound.
    When I import stereo WAVs and MP3s, it keeps the original stereo channels without me having to do anything special. I even just imported the same exact file as a MOV with stereo audio, and it showed up in Premiere as:
    Source Audio Format: 44100 Hz - 16 bit - Stereo
    Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
    What is going on here with AVIs? Am I doing something wrong? Are there settings I'm missing somewhere?
    (And before anyone suggests I only use MOV in the future... that's not exactly the answer I'm looking for.)

    Thank you for that info.
    For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
    There are two issues with that file:
    The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
    Good luck,
    Hunt

  • How to play a mp4 movie with DTS audio?

    Hello,
    I try to play a mp4 movie with DTS audio on the z1 player but i dont get any sound...I also have downloaded the app mx player, but this also wont play the dts audio. Any suggestions?
    Thanks,
    Edy

    http://forum.xda-developers.com/showthread.php?t=1831111
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • How to capture Vari Cam Footage with  PanasonicHD1200A

    Hi there. Thanks to those people who answered my previous question about the Vari Cam codec. I hate to say I am still a little confused.
    I should specifiy now that I am capturing footage from DVCPro tapes recorded on a Panonic Vari Cam (720p). The deck I am using is a panasonic HD1200A and I Have a AJA kona LS capture Card.
    I want to edit for final output for PAL, so 720x576 (it will be 4:3 letterboxed 16:9) and a frame rate of 25.
    So my question is which of Final Cut Pros many capture presets do I use. Do I need to downlaod a third party Codec.
    I tried using DVCPro HD 720p60 codec but this doesn't deliver the Data rate I was told to expect (14 mb/sec rather than 5.6mb/s). However it does seem to work. Will I simply have to scale the final movie to fit the proportions of PAL 4:3? As this is a green screen shoot how will my Key be effected by the Codec, GOP, P an B frames, or will final export with a quicktime conversion solve this. I appreciate your help in clearling up these mysterys of HD
    I am on a dual processor G5 with 3 gig of Ram.
    Thanks Sincerely
    Peter Stenhouse

    Great! It was shot at 720p25 (so i'm told) there was no use of the variable fps.
    I'm not delivering a DV master I want to deliver broadcast quality and as I also dong alot of post, a green screen key, I need the best quality possible. We shot on HD because, we originally we were going to shoot some slo mo. Typically the director changed his mind, didn't shoot any and now I am going through HD **** for no real reason (though the more filmic color space will be nice I am sure)
    Via Component sounds like a good idea, though I still need to adjust the deck to output 25fps rather than 30, which it somehow seems to be doing at the moment.
    Ordinarily I would capture from digibeta, but we only have the HD deck over the weekend so don't have the luxury of capturing offline RT and then onlining 8 bit uncompressed has I normally do. But I digress.
    I don't particularly want to have to work at 30 or 60 fps, beacues I never have before, and because the final output is for PAL Broadcast.
    I really appreciate your advice, the glimmers of hope that your words of wisdom provide.
    Sincerely
    Peter Stenhouse
    Excuse the ranting, I'm pretty stressed, I hate colliding with the first hurdle this hard.

  • How to play video repeatedly and with no audio

    Hello all,
    I use the following code to play video in Flex:
    public function startPlayback(event:CairngormEvent) : void
         if (model.nsDemoRemotePlay != null )
                                   * Stop and close previous NetStream.
                                  var demoStopStreamEvent :VCDemoStopStreamEvent = new VCDemoStopStreamEvent();
                                  CairngormEventDispatcher.getInstance().dispatchEvent(demoStopStreamEvent);
                        nc.connect(null);
                         * Setup NetStream for playback.
                        model.nsDemoRemotePlay = new NetStream(nc);
                        model. nsDemoRemotePlay.receiveAudio( false );
                        model.nsDemoRemotePlay.client = this._responder;
                             model.videoRemote = new Video(model.videoRemoteWidth, model.videoRemoteHeight);
                             model.videoRemote.attachNetStream( model.nsDemoRemotePlay );                    
         model.nsDemoRemotePlay.play("assets/videos/Demo.flv");
    I have two questions:Could anybody please help me in answering these.
    1. Is it possible to play a video without audio? I used receiveAudio( false ) with NetStream object. But audio is still there.
    2. How can I play a video play repeatedly? I want to play video repeatedly and stop it only when a Stop event is fired.
    Thanks.
    roshni.

    NSObj.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
    public function netStatusHandler(event:NetStatusEvent):void
         switch(event.info.code)
              case "NetStream.Play.Start" :// your code
                                                         break;
              case "NetStream.Play.Stop" :// your code 
                                                         break;
    }//end of netstatus handler function
    I hope my post will answer your question or helps

  • Compressor 3.5 How can I create ProRes file with AIFF audio?

    Hi,
    I've had some issues with audio playing in FCP 7.  I finally found that if I use an aiff audio file 48 16bit it would play okay in the Timeline.  I'm able to create an aiff audio only file in Compression, but if I use ProRes 422 for the Video it will use "passthrough" audio, which won't play in FCP.  I can turn passthrough off, but then I don't have the option of using an AIFF file, just a bunch of other stuff.  Tried the first available option, but it was either silence, or a screeching audio sound so loud it probably woke the neighbors.  There is something called "Apple Lossless", but that doesn't have the right bit rate it seems.
    Anyway, does anyone know how I can create a ProRes 422 file with the correct audio?  Or maybe the only option is to put the video in the FCP Timeline, delete original audio, then add audio that works?  Then perhaps export THAT and compress again into one file?
    Hope any of this makes sense, I have a small project I would rather edit in FCP7, but if I can't get it to work at all, I could just use Premiere Pro for this one.
    Any ideas?  Thanks! 

    Hmmm, this is weird.  I had already converted once to the format you suggested.  When I imported the file into FCP even the original didn't play right.  With the sound on my computer turned all the way down, there was no real audio, just a screeching sound so loud it would wake the dead.  I had to turn off the sound completely to not have my ear drums burst.  Put a small portion of the clip in the Timeline, there was no beeping, but instead no sound at all.
    I thought maybe I had done something wrong, so I chose a much smaller clip (45sec instead of 1:30 hours) that was in the exact same format the larger clip was.  That one played just fine in FCP after conversion, so I re-did the longer clip but got the screeching sound again as soon as I tried to play the clip after import.  When I play that same longer clip in Quicktime, the audio is normal, no screeching at all.
    Any idea why this might be happening?  It must somehow have something to do with the length of the clip.  But how could that be??

  • How do I re-synchronize video with its audio in PPCS5?

    I've captured video recorded at 24/fs.  PPCS5 captured the video and audio.  The video and audio play at dis-similar rates in PPCS5. The video and audio are synchronized when played in Windows Media Player, Real Player, and Corel. Appreciate a fix. Although, a work-around would be helpful in the interim.  Thanks.

    Strange.  I can't see any obvious reason for the loss of sync there.  With the data supplied so far, I'd expect everything to work just fine.  So...maybe there's some missing data.
    FAQ: What information should I provide when asking a question on this forum?

  • How to capture error message in a FM call during exception

    Hi,
    The FM i'm trying to call is giving an exception and don't have the built in mechanism to pass on the error message that occured during processing.
    However, if i see the job log in SM37, I'm able to see the corresponding error message.
    Please let  me know on how to capture this error message with in my program.
    Thanks,
    Vijay.

    Hi,
    add the exceptions...ERROR_MESSAGE to capture the error message..raised in the function module.
             EXCEPTIONS
                  ERROR_MESSAGE = 1.
    Thanks
    Naren

  • To maintain material with the plant

    hi to all,
    i hv create a configural material, but when im going to create a BOM for the material i face error, "material not maintained in plant". i want to know how i maintain this configural material with the plant to create BOM?

    Hi
    It seems you have created the material without giving any plant number
    you need to go again T code MM01 give the material number select the required views and give the plant number and storage location then system will extend tis material to the respective plant
    then you go ahead with BOM etc..
    Regards
    Abu Fathima

  • Black Screen with only audio

    Hey Follow FCP users.
    I'm importing a mini-dv tape thats in SP mode with 12bit audio and when I import into final cut, it gives me this error message:
    "The audio sample rate of one or more of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your captured preset matches the sample rate of your tape"
    And when I play the captured footage in final cut, it only gives me a Black screen with audio.
    I tried changing the
    My questions are this...
    Why is this happening and how can I fix it?
    Thanks in advance.

    http://discussions.apple.com/thread.jspa?threadID=1545615&tstart=0
    Are you sure you had VIDEO checked for capture?
    -DH

  • Mxf with 8 audio channels

    Hey guys,
    I`m editing a TV-Spot with Premiere CS6 and have to export it as a MXF OP1a (SMPTE 378M) (suffix .mxf) with 8 audio channels.
    When exporting it with Pr the mxf has only two audio channels (I have re-imported it into Pr for checking the channels)
    How do I get an mxf with 8 audio channels?
    I`m a bit stranded as I`ve to finish it until tomorrow....
    (video signal compliance: ITU-R BT.709)
    Thanks so far!

    Go to the Audio tab on the Export Settings dialog.  There you can select the number of channels in the MXF export.

  • Variant playlist with alternate audio in HLS

    How do you play a video with alternate audio tracks on Safari/Quicktime player?
    I'm using the Set level manifest as mentioned here : http://tools.ietf.org/html/draft-pantos-http-live-streaming-07#section-8.7
    However, only the default audio stream plays. How does not select another audio stream?
    Thanks,
    Apurva

    I'm having the exact same problem... So confused... Why would it have that option if it doesnt do anything? I used Handbrake as well. The 2 audio tracks show up on Quicktime and iTunes, but I cant use em when theyre on my iPod. Please help

  • How to capture the excise duty on free material purchasing?

    Scenario is like this if we purchase a lot of material then vendor gives free on some qty. then we make a purchase order for free material with tax code zero. Vendor supply that free material with excise duty. Now we do GRN & take part1 entry. How to capture part II entry. This is capital item.

    If you are following J1IEX route , then Tick MRP indicator & enter Excise duty values & take Part2.
    It is assumed that all other master data like chapter heading etc are set.
    Hope this will help.
    Regards,
    AK

  • How to capturing scrolling images with no java controls?

    Can somebody help me? I am trying to capture the image of the browser, using the followed code to do it, but I can not take it scrolling the screen. I do not use any control of java in the browser. Does anybody have an idea?
    Robot r = new Robot();
    image1 = r.createScreenCapture(clippedScreen);
    File file = new File("c:\\Csa\\3.9\\Fimages\\"+counter+".jpg");
    javax.imageio.ImageIO.createImageOutputStream(file);
    ImageIO.write(image1,"jpg",file);
    //Scroll the screen
    scrollTheScreen ();
    //Takes scrolled area
    image2 = r.createScreenCapture(new Rectangle(0,666,1280,80));
    File file2 = new File("c:\\Csa\\3.9\\Fimages\\"+counter+1+".jpg");
    javax.imageio.ImageIO.createImageOutputStream(file2);
    ImageIO.write(image2,"jpg",file2);
    As you can see I take two parts of the screen but I am having troubles adding the images, I do not know if there is an easier way to do this.
    Thank you in advance.

    Thanks to anybody, but i found the way on how to capture the image.
    1. Take a snapshot of the screen.
    2. Scroll the screen pushing the button down.
    3. Take the snapshot of the scrolled part of the screen.
    4. Scroll the screen pushing the button down.
    5. Take the snapshot of the scrolled part of the screen.
    6. Compare the 2 last images, if they are equals, stop scrolling, else scroll again.
    7. Join the images first, second and third images, to get a single one corresponding to the hole info of the browser.
    8. Save the resulting image.
    The thing in this problem is to manage the images as RGB components for that you must use the getPixel(col, row, color); method to manipulate the components in matrix and added to a bigger matrix where you join the complete components. Be sure that you manage the 3D matrix correctly, [width of the screen] [height of the screen] [RGB components], i.e.
    * This saves just the red component, the green and blue must be saved too.
    public int[][] imreadRed(BufferedImage bi)
              Raster r = null;     // * Raster
              int [][] image;     // * Image array
              int imageWidth = bi.getWidth();     // * Image Width
              int imageHeight = bi.getHeight();     // * Image Height
              int[] color = new int[3];     // * array to colors RGB (r -> 0, g -> 1, b -> 2)
              r = bi.getData();
              image = new int[imageHeight][imageWidth];
              for(int row = 0; row < imageHeight; row++)
                   for(int col = 0; col < imageWidth; col++)
                        r.getPixel(col, row, color);
                        image[row][col] = color[0];          //Saves the red color to the array image on the first coordinate
              return image;     //Return the array with the red component
         }* This merge the matrix into a bigger one.
    public int [][] mergeMatrix (int [][] mat1, int [][] mat2){
             int rowsMat1 = (mat1.length-53), colsMat1 = mat1[0].length,     //mat1.length da los renglones de la matriz height  
             rowsMat2 = mat2.length, colsMat2 = mat2[0].length;          //mat1[0].length da las columnas de la matriz width
             int [][] addedMatrix = new int [rowsMat1+rowsMat2][colsMat1];
             for (int row = 0; row < rowsMat1; row++) {
                  for (int col = 0; col < colsMat1; col++) {
                       addedMatrix [row] [col] = mat1 [row] [col];
              for (int row=0; row < rowsMat2; row++) {
                   for (int col = 0; col < colsMat2; col++) {
                        addedMatrix [rowsMat1+row] [col]  = mat2 [row] [col];
             return addedMatrix;
        }* This convert the matrix into an image.
    public BufferedImage imwriteComponents (int [][] arrRedImg, int [][] arrGreenImg, int [][] arrBlueImg) {
              int arrayWidth = arrRedImg[0].length;     // * Image Width
              int arrayHeight = arrRedImg.length;     // * Image Height
              BufferedImage completeImage = new BufferedImage(arrayWidth, arrayHeight, BufferedImage.TYPE_INT_RGB);     // Create a BufferedImage with RGB pixels
              WritableRaster wRaster = completeImage.getRaster();     // Create a raster so we can access the BufferedImage pixels
              int [] color = new int [3];     //color variable to save all the components
              //join the 3 matrix in one color type
              for(int row = 0; row < arrayHeight; row++)
                   for(int col = 0; col < arrayWidth; col++) {
                        color [0] = arrRedImg [row][col];
                        color [1] = arrGreenImg [row][col];
                        color [2] = arrBlueImg [row][col];
                        wRaster.setPixel(col, row, color);
              return completeImage;     //Return the Buffered image with the red array component
        }That is a solution that I found to this problem, if someone has an easy way to do it please tell us.
    Thank you.

Maybe you are looking for