How to capture error message in a FM call during exception

Hi,
The FM i'm trying to call is giving an exception and don't have the built in mechanism to pass on the error message that occured during processing.
However, if i see the job log in SM37, I'm able to see the corresponding error message.
Please let me know on how to capture this error message with in my program.
Thanks,
Vijay.

Hi,
add the exceptions...ERROR_MESSAGE to capture the error message..raised in the function module.
EXCEPTIONS
ERROR_MESSAGE = 1.
Thanks
Naren

Similar Messages

CcBPM, how to capture error message in the exception branch ?

Hi,
Can I capture error message in the exception branch ? how to do that ?
because i want to raise the alert including with the error message ?
Cheers
Fernand

Hello Fernand,
I hope at the end of this you may get some knowledge on Alerts.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
we configure to Adapter Engine).
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
(This is Important)
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
Please reward points if it is useful...
Thanks,
Satya Kumar

How to capture error message log for Tcode MIR7

Hi ,
I have a problem to capture the error message outside the tcode which are created by MIR7/MIR0 .
Are they stored in any database table?
Is there any other way to access them?
Anybody knows how to solve this that will be very helpful.
Thanks,
Anu

call transaction 'XK01' using i_bdcdata
                 mode 'N'
                 update 'S'
                 messages into i_bdcmsgcoll.
if sy-subrc <> 0.
    perform get_error.
        write:/ itab , v_text.
endif.
*Form
form get_error.
loop at i_bdcmsgcoll.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
   ID              = i_bdcmsgcoll-MSGID
   LANG            = sy-langu
   NO              = i_bdcmsgcoll-MSGNr
   V1              = i_bdcmsgcoll-MSGV1
V2              = SY-MSGV2
V3              = SY-MSGV3
V4              = SY-MSGV4
IMPORTING
   MSG             = v_text
EXCEPTIONS
NOT_FOUND       = 1
OTHERS          = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endloop.
endform.                    " get_error
Edited by: Bala Krishna on Sep 9, 2008 7:50 PM

How to capture error message from standard function module

Dear friends
when i execute standard function module in finance , i am getting error message , pls check the below screen shot,
how to capture the below error message so that i have display in my webdynpro component
Thanks
Vijaya

Hello Vijaya,
Incase of BAPI's they have a return table parameter T_RETURN. Just read that return table to get the error message.
Incase of normal function modules, there will be exceptions raised for the message used inside the function module. Just read the sy-subrc after the FM and based on the sy-subrc value find the respective exception raised.
May be you can try like this, whenever the message is raised it will be stored in the system variable.
CALL FM.
check for the system variables.
sy-msgid = Message ID of the latest message raised.
sy-msgno = message number of the latest message raised.
sy-msgty = message type of the latest message raised.
sy-msgv1 = variable1 of the latest message raised.
sy-msgv2 = variable2 of the latest message raised.
sy-msgv3 = variable3 of the latest message raised.
sy-msgv4 = variable4 of the latest message raised.
Regards,
TP

How to capture error messages for BCP when running through XP_CMDSHELL

XP_cmdshell returns 0 as success when running BCP that causes insertion failure for any records (failure because of truncation, data type mismatch etc.)
One way is to capture output message in temp table and can parse the messages. but I am looking for some direct methods.

Hi Naveen Raikwar,
We can use insert/execute syntax to insert error output to a file, here is a good article, please see:
http://www.sqlservercentral.com/articles/Error+Handling/69196/
And here is a similar thread, please refer to:
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/b37ec1fd-ea2f-4546-93c1-8bb9d589710d
Thanks,
Eileen
Eileen Zhao
TechNet Community Support

Capture error messages from stored procedure calls

Hi there,
How do I capture a stored procedure calls error messages provided the stored procedures does not have output parameters? This questions applies to Oracle 7.3.4 stored procedures calls.
TQ
Neo

There are two parts.
The stored proc must 'throw' an exception.
And java must catch it.
You probably already have the java part. That is the catch(SQLException).
As for the stored proc you can use the following search string in the jdbc forum
raise oracle
You need to use 'raise' in the stored proc but I am not sure of the exact form, but one of the threads using the above search string is likely to have it.

Anyone know how to capture error messages?

I'd like to capture the feedback I receive in the Output panel when testing something in the Flash IDE, and display it in a TextArea included in my movie when it is compiled and running in a live environment. Is there any way I can make this happen? Thanks if you can help me out.

So what kind of error am I dealing with when a movie clip I've loaded is trying to open an external file and that file doesn't exist? In the Output panel I see a message like "Error Opening URL 'blah'". Is that something that can be captured and displayed in a textarea? And if so, is it possible to write a global error handler so that any errors that occur would be processed in the same way? The reason being that I can't modify anything except for the clip I'm creating - the clips I'm loading can't be edited by me.
Thanks for any help!

How to make error message as warning message

how to make error message as warning message? ie i get error message hence cannot save the slaes order   i want to make that error message as warning so that i can save the sales order please help.

Hi
If a message is a custom message, then by changing the message type from E(Error) to W (warning)   we can convert the message type into error message. This is done with the help of development guy. A change in the code is needed.
If it is a standard message, then it depends on whether we have teh access to change the message type. If access is there, then it is possible to change the message from Warning to Error. i.e. If we are capturing std SAP message in our code and displaying then we can change it, else if SAP message is displayed directly, we cant change it.
So, to change it, capture the error message from SAP in some Zcode and then convert that message into a custom message of message type E.
The whole change needs ABAP support.
Try with tcode <b>OVA2</b> settings selecting for sales order or in SAPRO--SD-BF-Log of Incompletion Items
Message was edited by:
        SHESAGIRI.G

How to capture errors records in flat file in BDC

hi ,
    i would like to know how to capture error records while uploading a flat file to screen through BDC .
appreciatable solutions are rewarded.
thanks,
shan

Hi shan,
write this code, it will solve your problem.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA : I_MSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF I_ERR OCCURS 0,
          MATNR(18),
          FLAG(1),
          MSG(100),
       END OF I_ERR.
DATA :V_LINES TYPE I.
LOOP AT ITAB.
REFRESH BDCTAB.
PERFORM SCREEN USING: 'SAPLMGMM' '0060'.
PERFORM FIELD USING: 'RMMG1-MATNR' ITAB-MATNR,
                      'RMMG1-MBRSH' ITAB-MBRSH ,
                      'RMMG1-MTART' ITAB-MTART,
                      'BDC_OKCODE' '/00'.
PERFORM SCREEN USING: 'SAPLMGMM' '0070'.
PERFORM FIELD USING: 'MSICHTAUSW-KZSEL(01)' 'X' ,
                     'MSICHTAUSW-KZSEL(02)' 'X' ,
                     'MSICHTAUSW-KZSEL(09)' 'X' ,
                     'BDC_OKCODE' '=ENTR'.
PERFORM SCREEN USING: 'SAPLMGMM' '0080'.
PERFORM FIELD USING: 'RMMG1-WERKS' ITAB-WERKS,
                     'BDC_OKCODE' '=ENTR'.
PERFORM SCREEN USING: 'SAPLMGMM' '4004'.
PERFORM FIELD USING: 'MAKT-MAKTX' ITAB-MAKTX,
                      'MARA-MEINS' 'EA' ,
                      'MARA-MATKL' '001',
                      'BDC_OKCODE' '/00'.
PERFORM SCREEN USING: 'SAPLMGMM' '4004'.
PERFORM FIELD USING: 'BDC_OKCODE' '/00'.
PERFORM SCREEN USING: 'SAPLMGMM' '4000'.
PERFORM FIELD USING: 'MAKT-MAKTX' ITAB-MAKTX,
                      'MARA-MEINS' 'EA',
                      'MARC-EKGRP' '001',
                      'MARA-MATKL' '001',
                      'BDC_OKCODE' '=BU'.
CALL TRANSACTION 'MM01' USING BDCTAB
                        MODE 'A'
                        MESSAGES INTO I_MSG.
FINDING LAST MESSAGE IN THE I_MSG TABLE*****
DESCRIBE TABLE I_MSG LINES V_LINES.
ACCORDING TO THE V_LINES NUMBER TABLE WILL BE READ****
READ TABLE I_MSG INDEX V_LINES.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
   ID              = I_MSG-MSGID
   LANG            = '-D'
   NO              = I_MSG-MSGNR
   V1              = I_MSG-MSGV1
   V2              = I_MSG-MSGV2
   V3              = I_MSG-MSGV3
   V4              = I_MSG-MSGV4
IMPORTING
   MSG             = I_ERR-MSG
EXCEPTIONS
   NOT_FOUND       = 1
   OTHERS          = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF I_MSG-MSGID EQ 'M3' AND I_MSG-MSGNR EQ '800'.
I_ERR-FLAG = 'S'.
ELSE.
I_ERR-FLAG = 'E'.
ENDIF.
I_ERR-MATNR = ITAB-MATNR.
APPEND I_ERR.
CLEAR I_ERR.
ENDLOOP.
WRITE:/ 'SUCCESS RECORDS' COLOR COL_POSITIVE.
SKIP.
WRITE:/ 'MATERIAL' COLOR COL_HEADING, 20 'MESSAGE' COLOR COL_HEADING.
LOOP AT I_ERR WHERE FLAG EQ 'S'.
WRITE:/ I_ERR-MATNR, 20 I_ERR-MSG.
ENDLOOP.
SKIP 2.
WRITE:/ 'ERROR RECORDS' COLOR COL_NEGATIVE.
SKIP.
WRITE:/ 'MATERIAL' COLOR COL_HEADING, 20 'MESSAGE' COLOR COL_HEADING.
LOOP AT I_ERR WHERE FLAG EQ 'E'.
WRITE:/ I_ERR-MATNR, 20 I_ERR-MSG.
ENDLOOP.
*&      Form SCREEN
     SCREEN
form SCREEN using P_PROG P_SCREEN.
BDCTAB-PROGRAM = P_PROG.
BDCTAB-DYNPRO = P_SCREEN.
BDCTAB-DYNBEGIN = 'X'.
APPEND BDCTAB.
CLEAR BDCTAB.
endform.                    " SCREEN
*&      Form FIELD
   FIELD
form FIELD using FNAME FVAL .
BDCTAB-FNAM = FNAME.
BDCTAB-FVAL = FVAL.
APPEND BDCTAB.
CLEAR BDCTAB.
endform.                    " FIELD
Thanks,
Murali

How to prevent error message for material description in MDG material detail screen, when user click on check action

Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
Sukumar

Hello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß

How to print error messages in browser?

When I visit a jsp file in browser, there's some errors in the jsp file, so the browser returns
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
I want the detail error messages, so I can debug my problem. How to print error message in browser or find the message in some log file?

Hi Kanaraja,
Thanks for your answer. I need to get certain information from the list. So, I use LIST_To_ASCII FM. However, may I know the ascii_tab should be type to what? And after this FM, do I have to use another FM to display the ascii list?
data ABAPLIST type ABAPLIST OCCURS 0.
SUBMIT RPCALCU0 VIA SELECTION-SCREEN
with PNPXABKR = 'US'
with PNPTIMRA = 'X'
with PNPPABRP = '10'
with PNPPABRJ = '2003'
with PNPPERNR-LOW = '100750'
with PNPPERNR-LOW = '109202'
with PNPPERNR-LOW = '100255'
with PNPABKRS-LOW = 'US'
with SCHEMA = 'ZUSP'
with RADI_EDT ='X'
with EDT_VARI = 'CUS&SAP_US'
with TST_ON = 'X'
EXPORTING LIST TO MEMORY and RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = ABAPLIST
EXCEPTIONS
   NOT_FOUND        = 1
   OTHERS           = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = asci_tab
    listobject         = ABAPLIST
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

How to display error message in abap

How to dispaly error message in report?
i have to check the range bewteen two days and if it is not in range have to display error message only once.
next time if i press the execute button report will get executed without showing the warning message.
i am calculating the days between two dates, i am displaying the error message but if i press the execute button i will not allow me to execute the report.it again shows me the error message.i have to skip this in 2nd time.
can any one suggest what to do with this?

hello suman,
i am using select-option in my report. And i have to check the difference between two dates in select option input box( low-value and high-value). if it is greater then suppose 10 then i have to display warning message at once and then if click on execute button , the report should get executed without showing any warning messages in report.
here i am attaching my source code.please take a close look and tell me where should i have to make change.
SELECT-OPTIONS :s_bedat FOR ekko-bedat.
AT SELECTION-SCREEN ON s_bedat.
IF NOT s_bedat IS INITIAL.
    PERFORM bedat_validate.                       " Perform for Purchasing Document Date Validation
ENDIF.
FORM bedat_validate .                        " Form for Purchasing Document Date Validation
DATA : diffr TYPE i.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis                   = s_bedat-high
      i_datum_von                   = s_bedat-low
I_KZ_EXCL_VON                 = '0'
I_KZ_INCL_BIS                 = '0'
I_KZ_ULT_BIS                  = ' '
I_KZ_ULT_VON                  = ' '
I_STGMETH                     = '0'
I_SZBMETH                     = '1'
   IMPORTING
     e_tage                        = diffr
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED       = 1
OTHERS                        = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    IF diffr GT 31.
      MESSAGE s009(zerrormsg) WITH text-000 DISPLAY LIKE 'W'.
      LEAVE TO LIST-PROCESSING.
    ENDIF.
ENDIF.
ENDFORM.                    " BEDAT_VALIDATE

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

Facing problem while capturing error messages in ME51N

Hi Experts,
In ME51N transaction, we have included custom fields and tried to capture Error messages by building ex_message.
Below is the code that we used:
         loop at tb_error into wa_error.
            wa_message-type   = WA_ERROR-TYPE.
            wa_message-id     = c_zpr.
            wa_message-number = '007'.
             wa_message-message    = wa_error-message.
          wa_message-message_v1 = WA_ERROR-MESSAGE.
            wa_message-message_v2 = wa_eban1-bnfpo.
            APPEND WA_MESSAGE TO EX_MESSAGES.
            CLEAR WA_ERROR.
          endloop.
In my message class we have not hardcoded the messages because we need to capture dynamic messages(In message class it is 007: & & ). For that we have passed message text in wa_message-message.
But when Check button is selected, we are not the desired error message.
But if we pass the same message in Message_v1, we are getting the error message but it is getting truncated as the size is small when compared to Message field.
Waiting for your response.
Thanks & Regards,
Amarnath

Looks like configuration prob.
Have you tried jms examples of weblogic ? you may need to re-configure your server setup, to create example server.

How to capture error message in a FM call during exception

Similar Messages

Maybe you are looking for