How to capture error messages for BCP when running through XP_CMDSHELL

XP_cmdshell returns 0 as success when running BCP that causes insertion failure for any records (failure because of truncation, data type mismatch etc.)
One way is to capture output message in temp table and can parse the messages. but I am looking for some direct methods.

Hi Naveen Raikwar,
We can use insert/execute syntax to insert error output to a file, here is a good article, please see:
http://www.sqlservercentral.com/articles/Error+Handling/69196/
And here is a similar thread, please refer to:
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/b37ec1fd-ea2f-4546-93c1-8bb9d589710d
Thanks,
Eileen
Eileen Zhao
TechNet Community Support

Similar Messages

How to prevent error message for material description in MDG material detail screen, when user click on check action

Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
Sukumar

Hello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

How to write Error message for select options?

Hi
i have this select option statement
SELECT-OPTIONS: s_fevor FOR afko-fevor.
how to write error message for this?
Regards
Smitha

Error messages are displayed for Select-options mostly on two conditions:
1) You needs to check wether a value is entered or not its done by:
a)
Select-options:SELECT-OPTIONS: s_fevor FOR afko-fevor Obligatory.
   In this case error message is automatically throwed by system.
b) You can do this in Selection Screen events.
Ex:
AT SELECTION-SCREEN./AT SELECTION-SCREEN ON S_FEVOR.
IF S_FEVOR-LOW IS INITIAL.
MESSAGE 'XXXXX' TYPE 'E'.
ENDIF.
2) You need to Validate the entered value:
You can do this in Selection Screen events.
Ex:
AT SELECTION-SCREEN./AT SELECTION-SCREEN ON S_FEVOR.
SELECT FEVOR
             FROM AFKO
             INTO AFKO-FEVOR
             UP TO 1 ROWS
ENDSELECT.
IF SY-SUBRC NE 0.
MESSAGE 'XXXXX' TYPE 'E'.
ENDIF.
Regards,
Gurpreet

CcBPM, how to capture error message in the exception branch ?

Hi,
Can I capture error message in the exception branch ? how to do that ?
because i want to raise the alert including with the error message ?
Cheers
Fernand

Hello Fernand,
I hope at the end of this you may get some knowledge on Alerts.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
we configure to Adapter Engine).
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
(This is Important)
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
Please reward points if it is useful...
Thanks,
Satya Kumar

How to capture error message log for Tcode MIR7

Hi ,
I have a problem to capture the error message outside the tcode which are created by MIR7/MIR0 .
Are they stored in any database table?
Is there any other way to access them?
Anybody knows how to solve this that will be very helpful.
Thanks,
Anu

call transaction 'XK01' using i_bdcdata
                 mode 'N'
                 update 'S'
                 messages into i_bdcmsgcoll.
if sy-subrc <> 0.
    perform get_error.
        write:/ itab , v_text.
endif.
*Form
form get_error.
loop at i_bdcmsgcoll.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
   ID              = i_bdcmsgcoll-MSGID
   LANG            = sy-langu
   NO              = i_bdcmsgcoll-MSGNr
   V1              = i_bdcmsgcoll-MSGV1
V2              = SY-MSGV2
V3              = SY-MSGV3
V4              = SY-MSGV4
IMPORTING
   MSG             = v_text
EXCEPTIONS
NOT_FOUND       = 1
OTHERS          = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endloop.
endform.                    " get_error
Edited by: Bala Krishna on Sep 9, 2008 7:50 PM

How to capture error message from standard function module

Dear friends
when i execute standard function module in finance , i am getting error message , pls check the below screen shot,
how to capture the below error message so that i have display in my webdynpro component
Thanks
Vijaya

Hello Vijaya,
Incase of BAPI's they have a return table parameter T_RETURN. Just read that return table to get the error message.
Incase of normal function modules, there will be exceptions raised for the message used inside the function module. Just read the sy-subrc after the FM and based on the sy-subrc value find the respective exception raised.
May be you can try like this, whenever the message is raised it will be stored in the system variable.
CALL FM.
check for the system variables.
sy-msgid = Message ID of the latest message raised.
sy-msgno = message number of the latest message raised.
sy-msgty = message type of the latest message raised.
sy-msgv1 = variable1 of the latest message raised.
sy-msgv2 = variable2 of the latest message raised.
sy-msgv3 = variable3 of the latest message raised.
sy-msgv4 = variable4 of the latest message raised.
Regards,
TP

How to Add error message for component from the baking bean

I am in the situation, I need to add the h:message message component for each component at the time I am looking for an easy process something like I have to add the error message at the bean side, here I am using component binding approach but I am not able to add child for input Text components at the bean side, actually my final target is to add the message for each component when ever they get error and I have to change the style also.....
So please anybody help me......

Thanks for the response but one more thing right now I can't add message tag for each component so that I can add message from the baking bean as per ur solution I tried like this
FacesMessage msg = new FacesMessage("Testing is going");
msg.setSeverity(FacesMessage.SEVERITY_ERROR);
FacesContext.getCurrentInstance().addMessage(tf_ADD1.getId(), msg);
it is working but it is showing on the top of the for even no problem but I need to change the component color based on the message but I am not able to achieve that so how can I do that from backing bean now I can't add tags for each component.
So please show me a way.

How to extract error message for each output type.

Hi All,
Need your advice on the problem that I have.
Expected Solution:
1. Create an extra column for displaying header output error message from VF02 into a report program.
Steps that i have did:
1. Go to transaction VF02.
2. Enter a billing document number.
3. Hit enter. Click "Goto" > Header> Output
4. Click on the status that is red colour. Click on "processing log".
5. Press "F1" on the red colour message type. (Found out that it is a structure).
Need your advice on the question that I have:
1) How do we know that which "not successfully" process output type belong to which error message class?

Hi Brad Bohn,
Thanks for your advice. I am so sorry about that. Thanks so much for your advice. And i have follow your advices and steps given by you. Appreciate it very much.
But for this issue about how to extract message for each output type. I have follow your steps by using SE30 to trace VF03 and I managed to found out that they are using this function module "WFMC_PROTOCOL_SHOW". Need your advice on this, how do we know each different output type with different error message is pulled from?
From my further research and in depth debugging into this function module, i manage to find this global internal table "PROTO_TAB" which stores all the text messages for each output. How does this internal table is populated?
Thanks in advance.
Regards
Shawn

How to capture error message in a FM call during exception

Hi,
The FM i'm trying to call is giving an exception and don't have the built in mechanism to pass on the error message that occured during processing.
However, if i see the job log in SM37, I'm able to see the corresponding error message.
Please let me know on how to capture this error message with in my program.
Thanks,
Vijay.

Hi,
add the exceptions...ERROR_MESSAGE to capture the error message..raised in the function module.
EXCEPTIONS
ERROR_MESSAGE = 1.
Thanks
Naren

Error Message for Videos when using 2 computers and 1 iPod Nano 5th Gen

I have a 5th Gen iPod Nano and a PC (XP) and Laptop (Vista). I store my free digital copies of movies on the Laptop and all other media on the PC. I have both computers set to share iTunes libraries. When I tried to sync some TV shows from the PC to the Nano I got this error message: The iPod "xxxx" is currently linked to another iTunes library on the computer "xxxx". In order to copy the TV Show "xxxx" to this iPod you must link this iPod with this iTunes library. Doing so will remove 3 movies including 'xxxx' from this iPod.
Questions: 1)Why only videos and not music or podcasts? No problems with any other syncing and don't lose my music from the PC when I sync movies from the laptop. 2)Is there a fix for this?
I was able to do a work-around by copying the TV shows to a USB memory device and then transfering them to the iTunes on the laptop. I could then sync both the movies and the TV shows to the Nano.
I'm new at this iPod stuff and would appreciate your input.
Thanks.

Does this problematic song play okay in iTunes? Have you tried removing and resyncing it to your device via iTunes?
B-rock

How to retrive error message for sql agent job failure

My sql server agent job failed and didn't store any error message in the job history. Is there any other table from where I can get the error info????
The job has sql_message_id = 16389 and sql_severity = 16. What does they mean????

this link will solve your problem
http://www.sqlservercentral.com/articles/SQL+Server+Agent/67726/
ebro
CREATE PROCEDURE pr_GetStepFailureData
@JobName VARCHAR(250)
AS
This procedure gets failure log data for the failed step of a SQL Server Agent job
DECLARE @job_id UNIQUEIDENTIFIER
SELECT @job_id = job_id FROM dbo.sysjobs WHERE [name] = @JobName
SELECT 'Step ' + CAST(JH.step_id AS VARCHAR(3)) + ' of ' + (SELECT CAST(COUNT(*) AS VARCHAR(5)) FROM dbo.sysjobsteps WHERE job_id = @job_id) AS StepFailed,
CAST(RIGHT(JH.run_date,2) AS CHAR(2)) + '/' + CAST(SUBSTRING(CAST(JH.run_date AS CHAR(8)),5,2) AS CHAR(2)) + '/' + CAST(LEFT(JH.run_date,4) AS CHAR(4)) AS DateRun,
LEFT(RIGHT('0' + CAST(JH.run_time AS VARCHAR(6)),6),2) + ':' + SUBSTRING(RIGHT('0' + CAST(JH.run_time AS VARCHAR(6)),6),3,2) + ':' + LEFT(RIGHT('0' + CAST(JH.run_time AS VARCHAR(6)),6),2) AS TimeRun,
JS.step_name,
JH.run_duration,
CASE
WHEN JSL.[log] IS NULL THEN JH.[Message]
ELSE JSL.[log]
END AS LogOutput
FROM dbo.sysjobsteps JS INNER JOIN dbo.sysjobhistory JH
ON JS.job_id = JH.job_id AND JS.step_id = JH.step_id
LEFT OUTER JOIN dbo.sysjobstepslogs JSL
ON JS.step_uid = JSL.step_uid
WHERE INSTANCE_ID >
(SELECT MIN(INSTANCE_ID)
FROM (
SELECT top (2) INSTANCE_ID, job_id
FROM dbo.sysjobhistory
WHERE job_id = @job_id
AND STEP_ID = 0
ORDER BY INSTANCE_ID desc
) A
AND JS.step_id <> 0
AND JH.job_id = @job_id
AND JH.run_status = 0
ORDER BY JS.step_id
EXEC pr_GetStepFailureData 'JobName'

How to pass error message for an additional tab strip in MIGO

Hi,
I have created one additional tab strip in MIGO transaction,In that tab i have 5 text fields,In that 4 text fields i want to make as mandatory fields,In the existing screen MIGO is using " Application log" for passing any error message It is calling as include program in SAPLMIGO report program,In that "lmigolo2 " is the include program name.Now i am struggling how to make use that in my newly created screen.
Regards
Ambili B

Hi rahul,
Can u try these
:Object failed to run due to an error while processing on the Job Server.
2 )Object failed to run due to an error
3 )Object failed to run due to an error while proc... | SCN

How to set error message for 541 Movement type

Dear gurus,
            I want to know that is it possible to set error message through any configuration? My requirement is that when we create issue document using m.t 541 it will not allow me to process that document without releasing PO document.so for that i want to set error message.
<removed by moderator>
Message was edited by: Jürgen L

Hi,
   The subcontracting goods issue can be done even without PO reference. If your organization is strictly following the goods issue against PO only and you want to restrict the goods issue if the PO is not released, then you may check the below option. Please note that the below option is available in standard only from EHP 4 or above.
1. Refer the KBA: 1915825 - Transfer Posting reference to a Purchase Order in MIGO and activate the PO reference option in MIGO - Transfer posting.
2. Restrict the use of 541 movement in MB1B - Go to OMJJ and enter movement type as 541. Now go to "allowed transactions" folder and remove MB1B. Now the user cant use 541 in MB1B.
3. Maintain the field - Purchase order as mandatory field for the movement type 541 in OMJJ.
4. Train the users to use MIGO - Transfer Posting - Purchase order option for goods issue with 541 movement.
5. If the PO is not released, system wont allow to use the PO in MIGO - Transfer Postings.
6. If the user is selecting Transfer Posting - Other, system wont check the PO and hence it will allow to post the goods issue even if PO is not released. You may take organizational measures to restrict the usage or you may check for authorization concept - Refer the note: 773003 - MIGO: No authorization object for action/reference document
   If you are below EHP 4, there is no standard functionality available for the requirement as of my knowledge. If so, you may go for development to restrict the same.
Regards,
AKPT

How to get error message for VISA in CVI?

Hi there,
I was using labview 2012 to handle GBIP interface with VISA, the VISA write code will return an error cluster if exists. Recently, I switch to CVI and I use viWrite to write to the GBIP, but in this case, how can I get the error cluster?

Erik-S wrote:
Hi dragondriver,
There is not an error cluster in CVI in the same way that there are error clusters in LabVIEW. A VISA function should output an integer if there is an error, but it will not include a string and a boolean like LabVIEW does. You can set up a function that acts like an error cluster by creating a struct that has the error integer, a string related to that integer, and a boolean. You would have to use the integer to look up the error string from a library.
-Erik S
Thanks Erik. I found that when I operate the VISA, it actually return a number to tell success or failure only. I wonder how to extract the error message as string in CVI?

How to capture error messages for BCP when running through XP_CMDSHELL

Similar Messages

Maybe you are looking for