How to capture exception occurred during request phases processes

Hello
during postback sometimes an exception occurred but no message you can see on output console and this will realy make a problem and slow the project progress,
I want to know how to catch such exceptions and display them in console or in output logs. is there any configuration regarding this?
thanks

Which JSF implementation are you using? Consult the FAQ page for the Sun RI if that is the one you are using.

Similar Messages

An exception occurred during request processing

Hi,
When i am going to create activity as task it's showing error please advice me how to resolve this issue.
Diagnosis
An exception occurred during request processing. This was handled centrally. It changed the program flow and the result of the request probably contains errors.
Procedure
Contact your system administrator.
Procedure for System Administration
Activate checkpoint group BSP_WD_EXCEPTION_DISPLAY. To do this, use transaction SAAB. If the error recurs, further details are displayed.
Exception Details
CX_BSP_WD_HTTP_RESPONSE_ERROR -
Method: CL_BSP_WD_STREAM_LOADER=>LOAD_FROM_URL
Source Text Row: 159
rose.

Hello,
Please check from your basis team if 'fully qualified domain name of the server is correctky configuered'.
Also, check the host name of the system in the Hosts file.
This will resolve your issue for sure.
Regards,
Kapil Patil

Ng An exception occurred during the execution of the current web request.

An exception occurred during the execution of the current web request. Please contact the administrator to review the stack trace in the event log for more information about the error.
this error occured while making changes to the mapings, there was "&" in the source account and some test also loaded in the text,
the versio n of FDM is 11.1.2.0
I understand that because of loading & in the source account it is causing this issue,
How to delete this invalid char from database, which table and column will contain this information, Please advise me how to proceed on this.
thanks,
msr

This TSQL will do the trick. It's not the cleanest as I just wrote it, but it will dynamically remove the & from the data mapping tables and replace any invalid entries with the phrase INVALID.
--Remove && from Data Maps
--Charles Beyer ([email protected])
--NOTES : 'Hackish' version for demonstration purposes
-- Declare working variables
DECLARE @strTableName varchar(255)
DECLARE @strSql Nvarchar(500)
-- Create cursor to iterate through each Data Map table. Look in special table sysobjects to get a list of the tables.
DECLARE crsDataMapTables Cursor For
   select name
      from sysobjects
      where name like 'tdatamap%'
         and xtype = 'U'
Open crsDataMapTables
Fetch Next from crsDataMapTables Into @strTableName --Get the name of the first Data Map table and place it into working variable
While @@FETCH_STATUS = 0 Begin --While records (table names) exist, execute loop logic
print 'Cleaning table : ' + @strTableName
--Multi-pass updates to check the SrcKey, TargKey, and WhereClauseValue fields for the invalid character
--Dynamic SQL is used below so that we can use the Table Name from the cursor..
Set @strSQL = 'UPDATE ' + @strTableName + ' set SrcKey = ''Invalid'' where SrcKey like (''%&%'')'
exec (@strSQL)
Set @strSQL = 'UPDATE ' + @strTableName + ' set TargKey = ''Invalid'' where TargKey like (''%&%'')'
exec (@strSQL)
Set @strSQL = 'UPDATE ' + @strTableName + ' set WhereClauseValue = ''Invalid'' where WhereClauseValue like (''%&%'')'
exec (@strSQL)
Fetch Next from crsDataMapTables Into @strTableName
End
--Dispose of Cursor as we are done.
Close crsDataMapTables
Deallocate crsDataMapTables

N unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

some one can help me please
i have no idea what i must to do.
an unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

The Exception Handler gave all the info that you need. No need to print the whole stack trace.
The exception handler says
Exception Details: java.lang.IllegalArgumentException
TABLE1.NAME
Look in the session bean (assuming that is where your underlying rowset is). Look in the _init() method for statements similar to the following:
personRowSet.setCommand("SELECT * FROM TRAVEL.PERSON");
personRowSet.setTableName("PERSON");
What do you have?

Exception occurred during event dispatching:java.lang.NoSuchMethodError

Hello,
We have upgraded to the latest Oracle Application Server version 10.1.2.3.0 and the webutil version is 1.0.6.
But we face the following error while accessing the web link. Following message captured from Java Console.
Please suggest if you have any solutions/idea about this error. Thanks !
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
Maximum size: 50 MB
Compression level: 0----------------------------------------------------
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Downloading http://si02938.in.irt.com:7778/forms/java/frmall_jinit.jar to JAR cacheDownloading http://si02938.in.irt.com:7778/forms/java/frmwebutil.jar to JAR cacheDownloading http://si02938.in.irt.com:7778/forms/java/jacob.jar to JAR cacheDownloading http://si02938.in.irt.com:7778/forms/java/FileInformation.jar to JAR cacheDownloading cacheproxyHost=nullproxyPort=0connectMode=HTTP, native.
Forms Applet version is : 10.1.2.3
Exception occurred during event dispatching:java.lang.NoSuchMethodError at oracle.forms.webutil.common.VBeanCommon.init(VBeanCommon.java:281) at oracle.forms.handler.UICommon.instantiate(Unknown Source) at oracle.forms.handler.UICommon.onCreate(Unknown Source) at oracle.forms.handler.JavaContainer.onCreate(Unknown Source) at oracle.forms.engine.Runform.onCreateHandler(Unknown Source) at oracle.forms.engine.Runform.processMessage(Unknown Source) at oracle.forms.engine.Runform.processSet(Unknown Source) at oracle.forms.engine.Runform.onMessageReal(Unknown Source) at oracle.forms.engine.Runform.onMessage(Unknown Source) at oracle.forms.engine.Runform.processEventEnd(Unknown Source) at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source) at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source) at java.awt.Component.dispatchEventImpl(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source)
Edited by: user12233243 on Nov 16, 2009 10:28 PM
Edited by: user12233243 on Nov 16, 2009 10:29 PM

hi
read the following configuration i hope it will help u.
How to get up and running with WebUtil 1.06 included with Oracle Developer Suite 10.1.2.0.2 on a win32 platform
Solution
Assuming a fresh "Complete" install of Oracle Developer Suite 10.1.2.0.2,
here are steps to get a small test form running, using WebUtil 1.06.
Note: [OraHome] is used as an alias for your real oDS ORACLE_HOME.
Feel free to copy this note to a text editor, and do a global find/replace on
[OraHome] with your actual value (no trailing slash). Then it is easy to
copy/paste actual commands to be executed from the note copy.
1) Download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.
2) Copy or move jacob.jar and jacob.dll
[JacobStage] is the folder where you extracted Jacob, and will end in ...\jacob_18
cd [JacobStage]
copy jacob.jar [OraHome]\forms\java\.
copy jacob.dll [OraHome]\forms\webutil\.
The Jacob staging area is no longer needed, and may be deleted.
3) Sign frmwebutil.jar and jacob.jar
Open a DOS command prompt.
Add [OraHome]\jdk\bin to the PATH:
set PATH=[OraHome]\jdk\bin;%PATH%
Sign the files, and check the output for success:
[OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\frmwebutil.jar
[OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\jacob.jar
4) If you already have a schema in your RDBMS which contains the WebUtil stored code,
you may skip this step. Otherwise,
Create a schema to hold the WebUtil stored code, and privileges needed to
connect and create a stored package. Schema name "WEBUTIL" is recommended
for no reason other than consistency over the user base.
Open [OraHome]\forms\create_webutil_db.sql in a text editor, and delete or comment
out the EXIT statement, to be able to see whether the objects were created witout
errors.
Start SQL*Plus as SYSTEM, and issue:
CREATE USER webutil IDENTIFIED BY [password]
DEFAULT TABLESPACE users
TEMPORARY TABLESPACE temp;
GRANT CONNECT, CREATE PROCEDURE, CREATE PUBLIC SYNONYM TO webutil;
CONNECT webutil/[password]@[connectstring]
@[OraHome]\forms\create_webutil_db.sql
-- Inspect SQL*Plus output for errors, and then
CREATE PUBLIC SYNONYM webutil_db FOR webutil.webutil_db;
Reconnect as SYSTEM, and issue:
grant execute on webutil_db to public;
5) Modify [OraHome]\forms\server\default.env, and append [OraHome]\jdk\jre\lib\rt.jar
to the CLASSPATH entry.
6) Start the OC4J instance
7) Start Forms Builder and connect to a schema in the RDBMS used in step (4).
Open webutil.pll, do a "Compile ALL" (shift-Control-K), and generate to PLX (Control-T).
It is important to generate the PLX, to avoid the FRM-40039 discussed in
Note 303682.1
If the PLX is not generated, the Webutil.pll library would have to be attached with
full path information to all forms wishing to use WebUtil. This is NOT recommended.
8) Create a new FMB.
Open webutil.olb, and Subclass (not Copy) the Webutil object to the form.
There is no need to Subclass the WebutilConfig object.
Attach the Webutil.pll Library, and remove the path.
Add an ON-LOGON trigger with the code
NULL;
to avoid having to connect to an RDBMS (optional).
Create a new button on a new canvas, with the code
show_webutil_information (TRUE);
in a WHEN-BUTTON-PRESSED trigger.
Compile the FMB to FMX, after doing a Compile-All (Shift-Control-K).
9) Under Edit->Preferences->Runtime in Forms Builder, click on "Reset to Default" if
the "Application Server URL" is empty.
Then append "?config=webutil" at the end, so you end up with a URL of the form
http://server:port/forms/frmservlet?config=webutil
10) Run your form.
If its Correct/Helpful please mark it thanks.
Sarah

Application error occurred during request processing TRIAL EmployeeAddressD

I ve the NW Java Trial which is chipped with a demo scenario.
When I try to test this service:
Service: EmployeeAddressData
Test: getAddressByPersonalID_R (String personalid)
I'm runing into:
Result:
Application error occurred during request processing.
Details: com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
Exception id: [000C2980205100660000001900000F1D00044B2662750D88]
In the netweaver portal itself the user gets the following information when trying to access its data:
com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException: Exception on execution of web service with WSDL URL 'http://ivml2005:50000/EmployeeAddressData/Config1?wsdl' with operation 'getAddressByPersonalID_R' in interface 'EmployeeAddressDataVi_Document' User not found in HR: Exception on execution of web service with WSDL URL 'http://ivml2005:50000/EmployeeAddressData/Config1?wsdl' with operation 'getAddressByPersonalID_R' in interface 'EmployeeAddressDataVi_Document'
Any ideas on how to solve this or how to get an error msg, which has more information?
Edited by: Deniz Kesmen on Apr 18, 2008 5:52 PM

Hi Deniz Kesmen
Did you got the solution of the above problem?
I am also getting the same type of issue while executing the webservice for a BRM rule from a webdynpro java application.
I am using adaptive web service model for executing the webservice. Error is given below:
com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException: Exception on execution of web service with WSDL URL 'http://LT-ENTITPCONSAJ.s1.ms.unilever.com:50000/testrule/testrulePort?wsdl&mode=ws_policy' with operation 'invokeRules' in interface 'testrulePortType'
I am using CE 7.2 system.
If I execute the web service from wsnavigator it works fine.
Appreciate for you help.
Regards
Sajith

Application error occurred during request processing webdynpro

Hi all,
I have developed one sample web dynpro application( welcome). when was deploying the welcome application on the j2ee engine using NWDS. It is giving the fallowing error i.e.
500 Internal Server Error
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create deployable object 'local/Welcome' since it is not of a Web Dynpro object.
Exception id: [02004C4F4F50005C0000000A0000091800042D3A2DDDDEDB]
Please help me how to deploy this application successfully.
Regards,
Deviprasad.

Hi Deviprasad,
Check out this link
Re: Internal Server Error 500
Regards,
Prateek

Application error occurred during request processing. TCODE - RSPLAN.

while running the BI Integration Planning When i Click Start Modeler I am getting this error described below
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'sap.com/biplanworkbench1' and application 'Modeler' are not deployed on the server. Please check the used URL for typos.
Exception id: [001125C534B000480000001C000C90C20004261894A9684E]

still getting the same problem
I Have gone through the note no 919850 it says that
In particular, check the version of the BI-REPPLAN and BI-WDALV
software components.
and i have checked these component are not there
now question is how to install these component.
and if that gona really help
another point which i have check is
To do this, use the test function in the Web Dynpro Content
Administrator for JCo connections. The following settings are required
for the two JCo connections BI_METADATA and WD_ALV_METADATA_DEST
when i go to maintain jco connection there is no jco connection at all it is completely blank there

Exception occured during invocation of JCA binding ORA-01403: no data found ORA-06512: at line 1

Dear Legends,
My requirement is to call store procedure from BPEL. So for I created a BPEL with 2 assign activity and 1 Invoke activity to Invoke the DB adapter. After Deploying I tested the process but it shows the following error:
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DB_SBL_SPROCS1' failed due to: Interaction processing error.
Error while processing the execution of the SIEBEL.PORTAL_SPROCS.ACP_CONREGISTRATIONLOOKUP_WRAP API interaction.
An error occurred while processing the interaction for invoking the SIEBEL.PORTAL_SPROCS.ACP_CONREGISTRATIONLOOKUP_WRAP API. Cause: java.sql.SQLException: ORA-01403: no data found
ORA-06512: at line 1
Check to ensure that the XML containing parameter data matches the parameter definitions in the XSD. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-1403" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary></part><part name="detail"><detail>ORA-01403: no data found
ORA-06512: at line 1
</detail></part><part name="code"><code>1403</code></part></bindingFault></bpelFault></fault><faultType>
<message>0</message></faultType></messages></details></event><event sid="BpPrc0.1" cat="2" n="16" date="2013-08-08T05:39:39.121-04:00" type="4"><message>"BPELFault" has not been caught by a catch block.</message></event><event sid="BpPrc0.1" cat="2" n="17" date="2013-08-08T05:39:39.270-04:00" type="3"><message>The transaction was rolled back. The work performed for bpel instance "960968" was rolled back, but the audit trail has been saved for this instance.If this is a sync request, please resubmit the request from the client. If it is an async request, please recover from the recovery console by resubmitting the invoke message.</message></event></audit-trail>
What does the above error says?
1. Whether concern Grant or Execute Privileges is not properly provided to the user?
2. Is there any Dangling Privileges are prevailing?
3. Is that the Store Procedure to be Handled with an Error Handling by means of Exception?
4. Is that I have been giving wrong test data?
5. Is that No data being existing in the Procedure?
6. Is that anything related to XA and NON-XA Data Source?
Any kind of help would be much appreciated. Thanks in Advance.
Thanks,
Karthik

Can you check the following ?
a. Hopefully the when you execute the procedure using sql tool it works fine and returns data.
b. Is there any input parameter available for procedure ?
c. IF yes, is the parameter is mapped with the procedure parameter and populated with value before calling the procedure ?
d. In the audit trial, you can see from the invoke activity to see whether the parameter is populated with value or not ?
e. Check the input parameter by executing the procedure with sql tool to see whether this request is receiving any data in return or not ?
Thanks,
Vijay

Error occurred during the phase IMPORT_PROPER

Hi All,
We are currently installing Add-on ST-PI Rel.2008_1_620 SAPKITLRBA, and the corresponding 3 support packages SAPKITLRB1 to SAPKITLRB3, in one of the quality systems. However, an error is encountered during the installation which is as follows:
The installation was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
    -   Error in phase: IMPORT_PROPER
    -   Reason for error: TP_BUFFER_INCONSISTENCY
    -   Return code: 0008
    -   Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
        SAPKITLRBA)
Also, below is the SLOG of the system:
ERROR SAPKITLRBA ST6 I 0016 20110602203832 STPIUSER INUP
cpafisr5 20110602203531
STOP MAIN IMPORT ST6 I 20110602203833 INUP
cpafisr5 20110602203531
ERROR: stopping on error 16 during MAIN IMPORT
STOP imp all ST6 0016 20110602203833 INUP
cpafisr5 20110602203531
START MAIN IMPORT ST6 I 20110602203943 INUP
cpafisr5 20110602203943
START TRANSMIT BUFFER ENTR ST6 g 20110602204020 INUP
cpafist0
STOP TRANSMIT BUFFER ENTR ST6 g 0000 20110602204020 INUP
cpafist0
START COMMIT BUFFER ENTRIE ST6 g 20110602204020 INUP
cpafisk0
HALT 20110602204020
ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not
exist!
ERROR: EXIT(16) -> process ID is: 10932
WARNING: TA SAPKITLRB1 not found via index, reading whole buffer
The same add-on and support packages we successfully installed in its respective developement system and in other systems as well. However, request you all to kindly assist in resolving the error.
Thanks in advance.
Regards,
Indraneel Upponi

ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not exist!
Does this file exist on this location ? It seems buffer insoncistency from the error message.
Regards,
Subhash

SQL exception occurred during PL/SQL upload (Web ADI)

Hi,
I am having issue loading data using Web ADI, I am getting "SQL exception occurred during PL/SQL upload" error, I tried to restart Apache, also looked into the BNE.log file for the exact error but I am still not sure about this exception, can anyone please help?
bne:text="SQL exception occurred during PL/SQL upload."
bne:cause="Database insert error"
RDBMS: 11.2.0.3.0
Oracle Applications: 12.0.6
Thanks,
Bharat

I am having issue loading data using Web ADI, I am getting "SQL exception occurred during PL/SQL upload" error, I tried to restart Apache, also looked into the BNE.log file for the exact error but I am still not sure about this exception, can anyone please help?Please rename the log file, reproduce the issue and check the log file then.
bne:text="SQL exception occurred during PL/SQL upload."
bne:cause="Database insert error"Please see these docs.
R12 Uploading Intercompany Transactions Shows SQL Exception Occurred During PL/SQL Upload [ID 1234063.1]
Batch Element Entry (BEE) Spreadsheet Interface > 10 Rows Fails with Error: 'SQL exception occured during PL/SQL Upload.' [ID 388012.1]
How Do You Setup An AGIS Transaction That Has Several Transaction Lines For The Same Transaction [ID 946499.1]
FCH: Error: "The upload process has completed with errors. Please Close to return to the document and fix the errors. - No rows uploaded - <999> rows were invalid" During WebADI Data Upload [ID 553025.1]
R12: Legal Entity Name must be < 31 characters. [ID 472505.1]
Oracle Payroll 'Batch Element Entry ( BEE )' Frequently Asked Questions ( FAQ ) [ID 1353021.1]
Thanks,
Hussein

JTabbedPane: Exception occurred during event dispatching:

Hi,
I have a JTabbedPane where the tabs can be added dynamically by the method:
private void addNewTab(JTable aTable) throws java.lang.NullPointerException
final JTable t = aTable;
Thread addTab = new Thread()
public void run()
JScrollPane scroller = new JScrollPane();
JTable table;
if (t==null)
table = new JTable(columns, 0);
else
table = t;
table.setColumnsEditable(colEditable);
cachedTables.addElement(table);
scroller.getViewport().setView(table);
jtp.insertTab("Tab " + cachedTables.size(), null, scroller, "Tab", cachedTables.size()-1);
jtp.updateUI();
SwingUtilities.invokeLater(new Runnable()
public void run()
jtp.setSelectedIndex(cachedTables.size()-1);
jtp.validate();
addTab.start();
The problem is that occasionally (20% of the times) I receive this exception:
Exception occurred during event dispatching:
java.lang.NullPointerException
     at javax.swing.plaf.basic.BasicTabbedPaneUI.rotateInsets(BasicTabbedPaneUI.java:1159)
     at javax.swing.plaf.basic.BasicTabbedPaneUI.getTabAreaInsets(BasicTabbedPaneUI.java:951)
     at javax.swing.plaf.basic.BasicTabbedPaneUI.calculateTabAreaHeight(BasicTabbedPaneUI.java:924)
     at javax.swing.plaf.basic.BasicTabbedPaneUI.paintContentBorder(BasicTabbedPaneUI.java:637)
     at javax.swing.plaf.basic.BasicTabbedPaneUI.paint(BasicTabbedPaneUI.java:358)
     at javax.swing.plaf.ComponentUI.update(ComponentUI.java:39)
     at javax.swing.JComponent.paintComponent(JComponent.java:395)
     at javax.swing.JComponent.paint(JComponent.java:687)
     at javax.swing.JComponent.paintChildren(JComponent.java:498)
     at javax.swing.JComponent.paint(JComponent.java:696)
     at javax.swing.JComponent.paintWithBuffer(JComponent.java:3878)
     at javax.swing.JComponent._paintImmediately(JComponent.java:3821)
     at javax.swing.JComponent.paintImmediately(JComponent.java:3672)
     at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:370)
     at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:124)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:154)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:337)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:131)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:98)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:85)
Does none know, how I can solve the problem?
Thanks,
Diego.

Fix the NullPointerException. The stack trace tells you the line that caused the problem.

BEA-010026 Exception occurred during commit of transaction Xid...

Srs,
Does anyone know how can i change the IP address bellow ? is there any file with this configuration ? ( i dont know so well weblogic )
This is a unkown IP (10.26.71.28) and probably for this reason, the following error appears:
<Mar 31, 2010 1:53:48 PM BRT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-012A4C55A4FA8C6F67D0(13881631),Status=Rolling Back. [Reason=javax.transaction.SystemException: SubCoordinator 'AdminServer+*10.26.71.28*:7001+tdws_domain+t3+' not available],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=167,seconds left=55,XAServerResourceInfo[JMS_ADMLoggingStore]=(ServerResourceInfo[JMS_ADMLoggingStore]=(state=rolledback,assigned=adm_managed_server),xar=JMS_ADMLoggingStore,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=(ServerResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=(state=new,assigned=AdminServer),xar=weblogic.jdbc.wrapper.JTSXAResourceImpl@15d1298,re-Registered = false),SCInfo[tdws_domain+AdminServer]=(state=rolling-back),SCInfo[adm+adm_managed_server]=(state=rolledback),properties=({weblogic.jdbc=t3://*10.26.71.28*:8080, START_AND_END_THREAD_EQUAL=false}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=adm_managed_server+146.250.132.247:7001+adm+t3+, XAResources={weblogic.jdbc.wrapper.JTSXAResourceImpl, JMS_ADMLoggingStore},NonXAResources={})],CoordinatorURL=adm_managed_server+146.250.132.247:7001+adm+t3+): javax.transaction.SystemException: SubCoordinator 'AdminServer+*10.26.71.28*:7001+tdws_domain+t3+' not available
at weblogic.transaction.internal.TransactionImpl.abort(TransactionImpl.java:1045)
at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:173)
at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:163)
at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1202)
at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:2007)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:257)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:430)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2698)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2610)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
--------------- nested within: ------------------
weblogic.transaction.RollbackException: SubCoordinator 'AdminServer+10.26.71.28:7001+tdws_domain+t3+' not available - with nested exception:
[javax.transaction.SystemException: SubCoordinator 'AdminServer+10.26.71.28:7001+tdws_domain+t3+' not available]
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1687)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:311)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:430)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2698)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2610)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Thanks,
Claudio
Edited by: user1098890 on 31/03/2010 12:35

Did anyone ever find an answer to this? I have the same problem.

System.Reflection.TargetInvocationException: An exception occurred during the operation, making the result invalid.

When I run my app on device and the internet is connected its ok, but if I use the emulator (althought the internet is connected):
$exception{System.Reflection.TargetInvocationException: An exception occurred during the operation, making the result invalid. Check InnerException for exception details. ---> System.Net.WebException: The remote server returned
an error: NotFound. ---> System.Net.WebException: The remote server returned an error: NotFound.
at System.Net.Browser.ClientHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
at System.Net.Browser.ClientHttpWebRequest.<>c__DisplayClasse.<EndGetResponse>b__d(Object sendState)
at System.Net.Browser.AsyncHelper.<>c__DisplayClass1.<BeginOnUI>b__0(Object sendState)
--- End of inner exception stack trace ---
at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
at System.Net.Browser.ClientHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.WebClient.GetWebResponse(WebRequest request, IAsyncResult result)
at System.Net.WebClient.DownloadBitsResponseCallback(IAsyncResult result)
--- End of inner exception stack trace ---
at System.ComponentModel.AsyncCompletedEventArgs.RaiseExceptionIfNecessary()
at System.Net.DownloadStringCompletedEventArgs.get_Result()
at FitnessApp.BL.ServerConnection.wc_DownloadStringCompleted(Object sender, DownloadStringCompletedEventArgs e)
at System.Net.WebClient.OnDownloadStringCompleted(DownloadStringCompletedEventArgs e)
at System.Net.WebClient.DownloadStringOperationCompleted(Object arg)}
System.Exception {System.Reflection.TargetInvocationException}
this is the stack trace:
at System.ComponentModel.AsyncCompletedEventArgs.RaiseExceptionIfNecessary()
at System.Net.DownloadStringCompletedEventArgs.get_Result()
at FitnessApp.BL.ServerConnection.wc_DownloadStringCompleted(Object sender, DownloadStringCompletedEventArgs e)
at System.Net.WebClient.OnDownloadStringCompleted(DownloadStringCompletedEventArgs e)
at System.Net.WebClient.DownloadStringOperationCompleted(Object arg)
this is my code:
void wc_DownloadStringCompleted(object sender, DownloadStringCompletedEventArgs e)
try
if (e.Error != null)
string error = e.Error.Message;
string functionCall = e.UserState.ToString();
if (!string.IsNullOrEmpty(e.Result)) //this line throws an exception
if (functionCall == "getProductCode")
ProductsList productsList = JsonConvert.DeserializeObject<ProductsList>(e.Result);
if (productsList.products != null)
serverProducts = productsList.products.Select(p =>
new BE.Product
Product_code = p.PID,
Product_name = p.Name
}).ToList();
else
serverProducts.Clear();
if (DataDownloadCompleted != null)
if(functionCall =="getProductCode")
DataDownloadCompleted(this, new BE.StringEventArgs("getProductCode"));
catch (Exception)
throw;
public void searchProductCode(string productName)
try
if (DeviceNetworkInformation.IsNetworkAvailable && DeviceNetworkInformation.IsCellularDataEnabled)
wc.DownloadStringAsync(new Uri(baseURI + "get_products_json.php?search=" + productName), "getProductCode");
else
throw new Exception(FitnessApp.Resources.AppResources.ErrorServerConnection);
catch (Exception )
throw ;
Any solution?
thank you..

The server did not find the resource you asked for.
You might want to make sure your emulator is connected to the internet and can go online.
http://blogs.msdn.com/b/wsdevsol/archive/2013/10/01/why-can-t-the-windows-phone-emulator-go-online.aspx

Unhandled exception occurred during the execution of the workflow instance

I had a workflow and library working with no issues, but had to move the library and export the workflow to another subsite (though on the same web site/collection). I followed these how-tos:
http://msdn.microsoft.com/en-us/library/office/jj819316%28v=office.15%29.aspx
http://technet.microsoft.com/en-us/library/ee428301%28v=office.15%29.aspx
Anyway, I've stripped all actions from the workflow and only have an Assign Task, but get this below:
An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ArgumentException: ContentTypeId at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
To troubleshoot, I removed all library columns, removed then re-added the Custom Content type the New Document uses, and still the same error - with the workflow going into Suspended mode.
I also tried the removal of the file from /Relationships%20List/allitems.aspx and de-activating then re-activating the SharePoint Publishing feature, also that didn't work.
I've gone into ULS, but unable to find anything definitive, so not sure what to try next?
Thank you,
Chad

Hi Chad,
Glad to hear the issue is resolved. Content types could be used for multiple lists in SharePoint site at the same time.
However, I'm not quite sure why you said the resolution is for a "bug". I read the article per your link:
http://www.andrewconnell.com/blog/SP2013-Workflow-Custom-Task-Outcomes
The article is showing how to create custom outcomes buttons in task forms. As I understand, the issue you encountered is that workflow migrated from the other site shows the suspended status.
Please be more specific on the issue if assistance is needed. If this is the second question, I’d recommend you open another thread in the relevant forum and provide specific information about the issue. In order to avoid confusion and keep track of troubleshooting
steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently.
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

How to capture exception occurred during request phases processes

Similar Messages

Maybe you are looking for