How to capture from Camera to PPRO CC?

Equipment used:
1. GY-HM750U JVC
2. 1394 Firewire port to thunderbold adapter into Macbook Pro
The record settings on my camera match my project settings in PPRO CC. However when I go to the capture Panel and hit record I see nothing in on the screen (what my camera sees I cannot see). Then after I hit ESC to stop recording or even stop it pops up with "unknown record error" message.
I have setup my device control, and have even attempted it as none.
All I am trying to do is get a backup live recording from my camera via firewire.
I've followed my JVC firewire setup and set things accordingly in PPRO CC to no avail. Any help would be great!

That would suck. The whole point of the adapter is to allow this to happen. Thanks for your input.

Similar Messages

FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ? Any solution * Advance Thanks

FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ?
Any solution * Advance Thanks

FCP X will import into separate clips every time it detects a scene change (as when you stopped and started recording in the camera). There is no option to avoid this, as far as I known.
You may try importing from camera using Quicktime Player X and then bringing the imported file into FCP X.

Is it Possible to Mark Chapter while capturing from camera?

While capturing from camera there are incidents (like obvious mis-speaks, etc.)that I would like to mark during the shoot when they happen to facilitate finding them while editing.
Is this possible to enter a chapter marker or something during live capture?
Open to any other suggestions.
Thank you.
I am using FCP 7.0.3.

After about a year of manually noting the time code and notes, I finally found a solution to the problem of marking chapters during a live shoot.
Final Cut Pro X will not allow you to mark a file while capturing it, probably because it does not actually change the raw file. However I just found a piece of software that will do the trick nicely. It is called Cut Notes. The only catch is that you must have an iPad to run it.
You can purchase it from digital rebellion for $9.99 at
http://www.digitalrebellion.com/cutnotes/
You start Cut Notes at the same time that you begin to capture, and it will start a timeline, identical to the one in FCP. Then for every edit point, you simply tap a key to insert the timecode along with either a pre-determined note or manually entered note as to the event. For example I have a note key that says MisSpeak, the opertator just taps it when I mis speak and it saves the time code and the MisSpeak title into a text file. I have another note key same for "walked off screen." You can Edit any number of note keys you may need. Then when finished, Cut Notes will email the file to your computer, simply import it to FCP as chapters using a free utility available at the same website. Awesome!!!
The only caveat is that you must import the file with markers before you do any editing to the project in FCP.
Hope this is helpful.
jac

How to capture Vari Cam Footage with PanasonicHD1200A

Hi there. Thanks to those people who answered my previous question about the Vari Cam codec. I hate to say I am still a little confused.
I should specifiy now that I am capturing footage from DVCPro tapes recorded on a Panonic Vari Cam (720p). The deck I am using is a panasonic HD1200A and I Have a AJA kona LS capture Card.
I want to edit for final output for PAL, so 720x576 (it will be 4:3 letterboxed 16:9) and a frame rate of 25.
So my question is which of Final Cut Pros many capture presets do I use. Do I need to downlaod a third party Codec.
I tried using DVCPro HD 720p60 codec but this doesn't deliver the Data rate I was told to expect (14 mb/sec rather than 5.6mb/s). However it does seem to work. Will I simply have to scale the final movie to fit the proportions of PAL 4:3? As this is a green screen shoot how will my Key be effected by the Codec, GOP, P an B frames, or will final export with a quicktime conversion solve this. I appreciate your help in clearling up these mysterys of HD
I am on a dual processor G5 with 3 gig of Ram.
Thanks Sincerely
Peter Stenhouse

Great! It was shot at 720p25 (so i'm told) there was no use of the variable fps.
I'm not delivering a DV master I want to deliver broadcast quality and as I also dong alot of post, a green screen key, I need the best quality possible. We shot on HD because, we originally we were going to shoot some slo mo. Typically the director changed his mind, didn't shoot any and now I am going through HD **** for no real reason (though the more filmic color space will be nice I am sure)
Via Component sounds like a good idea, though I still need to adjust the deck to output 25fps rather than 30, which it somehow seems to be doing at the moment.
Ordinarily I would capture from digibeta, but we only have the HD deck over the weekend so don't have the luxury of capturing offline RT and then onlining 8 bit uncompressed has I normally do. But I digress.
I don't particularly want to have to work at 30 or 60 fps, beacues I never have before, and because the final output is for PAL Broadcast.
I really appreciate your advice, the glimmers of hope that your words of wisdom provide.
Sincerely
Peter Stenhouse
Excuse the ranting, I'm pretty stressed, I hate colliding with the first hurdle this hard.

How receive image from camera with PCI-bus

Hello all
Please help
me.
I have LV 7.1.1.
I wont
watch two and more images from cameras at the same time.
I have capture
card (PCI-bus) with 4 video-input.
What kind
of data must be transfered from this capture card to LV?
With respect
Aleksandr.

Hello Aleksandr
please provide more information, what type of video card do you have?
Have you configure the card so you can watch an image with MAX?
I suppose the card has the ability to capture more than one image at a time is that true?, however most of the cards that I know of, have several inputs but you can only display one image at a time, you can swith between them and capture and image from another input, to capture more than one unit at a time you would need to open/close sessions with the instrument/card such that you are switching from one input to another
vicente

Capturing from camera...

I have a HITACHI digital camera connected to my mac via usb.. final cut express 3.0 does not let me capture from it ... why is that????

FCE supports firewire connectivity with mini-dv camcorders. So, the USB connection is one problem. What format is your camera? I thought all Hitachi's current camcorders were disc-based.

Premiere Pro: Capturing from Camera

I'm unable to capture digital video directly from any camcorder.
Adobe's documentation says I need a firewire connection(?!) for that. That can't be right.
Apple, at least in the iMac, has eschewed firewire connections in favor of thunderbolt.
Longtime software partner Adobe, issues state of the art software that only allows for obsolete hardware??
I'm sure this has been asked before. Can anyone clue me in?
I'm considering attempting a workaround:
HDMI-to-Thunderbolt adapter.
Has anyone tried that?
Any other workarounds?

I may have misunderstood your intentions initially, thought you wanted to record "live" from camera to computer, as one might do in a studio situation. This can be very beneficial when shooting green screen footage for instance. Most camcorders use a LOT of compression when saving to in-camera media, along with weak 4:2:0 color, and by recording the live HDMI output using the Intensity or MXO2 device, allows you to record to a much higher-quality codec with intra-frame recording at high bitrates using 4:2:2 color, for improved keying results.
As others said, copying SD card contents to computer hard drive is typically the best solution for most users these days. The HDMI capture devices I mentioned do not copy "data" as you mentioned, the way that Firewire or USB have worked in the past. Rather, you would PLAY the video in the camcorder, and the video coming out the HDMI port as "uncompressed video" is then captured to the format you specify. The video is being converted to something else, and is not simply a "data transfer".
Thanks
Jeff Pulera
Safe Harbor Computers

Help!!! how do you capture from cam then feed it directly to codec?

i'm doing a program that puts effect from the input of the captured video. i can't figure out how to insert a codec from input to output. i've already got everything going except that.
help..

Hi,
You can try a package named: JTwain, which is available at http://asprise.com/product/jtwain.
JTwain supports all kinds of digital cameras and scanners. You can use Java to access, contorl digital cameras and scanners, and of course, to acquire images with flexible settings.
The developers' guide is available @ http://asprise.com/product/jtwain/devGuide.php
In the simplest case, one line of Java code can solve your problem.
Good luck!

Unable to initialize video deck, (can not capture from camera)

Hello All,
I am using a quad core G5 and am trying to capture some footage into Final Cut Pro version 5.0. I have two Panasonic DVX 100B mini DV cameras. I normally capture with a JVC BR-DV3000 mini DV deck but it is currently not working. So I'm trying to capture using my camera.
I hooked my camera up to my computer via firewire and started final cut, When I click File > Log and capture a little window pops up that reads:
" Unable to initialize video deck. You may still log offline clips or use Capture Now"
I'm not sure why this box is appearing. When I click the capture now button, the Capture window pops up and then I press play on the video camera and the footage plays on the camera but the capture window remains black or empty. I have tried both cameras and two different firewire cables with the same results. I have also tried to restart the computer.
Can anyone shine some light on this situation?
Thank you so much for your help.
Mike Wardynski

Are there any other firewire devices connected to your Mac?
Did you go into your easy setup and reselect the DV setting for the standard you are using?
Also sometimes, shutting down and restarting your Mac, after making these changes some times allows the new device to be recognized.
One other thing, the DV camera may have a menu setting that needs to be set for communication via firewire possibly?

Encoding DV to ProRes 422 while capture from camera

Is It possible to capture a DV tape encoding with ProRess 444?

but if you're trying to integrate DV into a project that is already predominantly made up of ProRes footage, whether it's from DigiBeta or HDCAM, it would decrease render times.
Not by much. I'd opt for the minimal rendering over the file size that would happen with the change in data rate.
Don't we always preach to have all your footage in the same codec whenever possible?
There are exceptions.
Shane

How do I xd-cam hd pal capture to fcp then export to mpeg2?

I am using fcp 5.1.4 on a g5 2.5 quad.
How I capture xd-cam hd pal 20:00 min video/audio clip using firewire from camera to computer. Then export that clip to Mpeg 2 for ftp to client.
I know I have to change sequence and capture settings. I cannot find capture preset, but found only sequence preset for xd-cam.
Do I need an upgrade for fcp to studio 2?

No need to upgrade to FCS2.
What you need is the PDZK-P1 Transfer App v1.1 from Sony.
Download that from here.
Read the manual that is included with the download, and you should be good to go, as far as importing into FCP.
From there send the .mov through Compressor to make your M2V file.
MacBook Pro 2.33GHz/2GB RAM/160GB HD/256MB VRAM Mac OS X (10.4) Apple Pro Certified, Final Cut Pro 5-Level 1

FCE capture from iSight on iMac?

Sorry for the newbie question..
I just tried my new iMac and FCE, and I was wondering how to capture from the builtin iSight camera?
I know this is 2 questions, but can I also capture from my home movie DVD's?
Thanks
Gray

Neither. I believe the current version of iMovie will capture from the iSight.

How to capture an image from my usb camera and display on my front panel

How to capture an image from my usb camera and display on my front panel

Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
Christian

How to capture JPEG files by using camera

Hi, now I have a problem, I need your help, I am trying to use a camera that capture JPEG files from camera, I have used those related classes(JMF), but I still can not capture any JPEG files from it.
Although there are some examples about the video capture(just for mov or avi files), it does not mention how to capture JPEG files.
Thank you for your help!

I have the same problem.
please,help us.

How to store the data captured from oscilloscope into the MS Access database table

Hi All,
In my application, I tried to save the data captured from SCOPE, but could store only 200 bytes. I've taken the Memo data type for the field in database. I want to store all data ( 4 channels) in one field & retrieve back and display on the XY Graph.
Thanks in advance.
Regards,
Shrini

kramish wrote:
Im pretty sure that Access does support JDBCNo it does not. It supports ODBC.
just doing a quick Google came up with some pages:
http://blog.taragana.com/index.php/archive/access-microsoft-access-database-from-java-using-jdbc-odbc-bridge-sample-code/
http://www.javaworld.com/javaworld/javaqa/2000-09/03-qa-0922-access.html
Both articles explains how to use the jdbc-odbc bridge. I think I've seen a pure jdbc driver for access but it wasn't from Microsoft and it wasn't free.
Kaj

How to capture from Camera to PPRO CC?

Similar Messages

Maybe you are looking for