How to capture HDV 24P footage without pull down

I´ve got some imagens with HVR-V1U in a HDV 24p mode thinking to transfer to film. Now I´d like to uploud the images in the same mode. In Premiere there is only HDV 30p and the option 24p only works for dv format. So, in the HDV 30p I receive the file in a Adobe with 6 more frames per second and it doesn´t work for cinema. Is there any way to edit a project in Premire in HDV 24p mode, and in this case how to get the file from the camera.
thanks.

Hi(Bonjour)!
Final Cut Express doesn't support HDV natively. It uses Apple Intermediate Codec upon capturing process to convert the HDV format.
Even if you can download your HDV from your PC to your Mac, you haven't the HDV native quicktime component to open the material for conversion to AIC purpose.
Final Cut Pro allows to works with native HDV.
So why don't you use more tapes and keep archived source material. Mini DV are pretty cheap these days.
Michel Boissonneault

Similar Messages

  • Best DV deck for capturing Panasonic 24p footage

    Hi everyone,
    I'm working with 24p footage from Panasonic DVX-100A and HVX-200 cameras. I've always found the tapes tricky to capture with Advanced Pulldown Removal, and now I'm unhappy with my Sony DSR-11 VTR.
    I'm finding that some equipment plays nicer with 24p footage than others.
    Some of my editing colleagues have suggested that I should use Panasonic equipment - and they do have an equivalent low-end DV deck, the AG-DV2500.
    Any suggestions from the field? My budget does not permit buying a full-blown studio DVCam machine, unfortunately.
    Joe

    I put this question to Larry Jordan, of newsletter fame, and he feels that I'll be better off with a Panasonic VTR - so I'm gonna give that a try.

  • Capturing DVCPro50 24P Footage

    If anyone could help, I would appreciate it. I am trying to capture Anamorphic DVCPro50 footage shot at 24 fps (Panasonic DVCPRO50 Deck). I initially captured the footage with the following captured the footage DV50 48KHz Anamorphic. The footage looks great on the timeline (DV50 48KHz Anamorphic), but it is sped-up. I made a new timeline (DV%) 48kHz - 23.98 Anamorphic)and the footage moves at the correct speed, but I have to render the footage. Is there any capture setting that coincides with this timeline setting? Or is the deck playing the footage at the wrong speed? Where have I gone wrong?
    Please advise.
    Thank you.
    Message was edited by: Brian Hunt1

    Did you shoot 24p or 24pA?
    At either rate, you captured as 29.97 with that preset. Which is why you must render it on a 23.98 timeline.
    I'm not sure why it's speeding up the footage, are you positive that is happening?
    If you shot 24pA and want to work on a 23.98 sequence, recapture using the DVCPro50 Anamorphic Advanced Pulldown Removal preset.
    If you shot 24p, work on your 29.97 timeline with the footage you have already captured, and make sure it is really speeding up.

  • How to upload files in cluster without bringing down the cluster.

    Hi,
    Here is my problem:
    My weblogic portal 7.0 application should run in 24x7 environment. The production
    system is running in a cluster mode with external staging. Both the managed servers
    are pointing to the same application sync database.
    So to give a solution to this problem, we are trying to bring down one managed
    server down and apply the patches into that managed server without bringing down
    the other. Since webflow files and entitlements needs to be synchronized with
    the portal database. If we perform a sync on the portal database, there might
    be a chance that it might corrupt the existing portal database state. Our deployment
    would not be complete unless we perform a sync on the other managed servers. So
    we could not able to update the latest pathces into the cluster without bringing
    down the cluster.
    What I would like to know is "Is there any work around to get rid of this problem?".
    I would be delighted if any one provides the solution.
    Thanks & Regards,
    Ratnakar

    Hi Ratnakar,
    When you perform sync you do it against the admin server which in turn does it
    to the managed server. If you want to apply any changes to webflow you can do
    it on the live system itself. I mean apply the new webflow and entitlements and
    do the sync on the live system. Also while doing sync there are two modes. One
    mode will sync only the modified changes and the other will apply all of it. You
    can opt for the first option by which you can sync only the modified changes.
    This may bring a small disturbance but it will be unnoticed.
    The other option is to have two separate domains(each having one admin & one or
    more managed servers) which may be having two separate portal databases. In this
    way you can apply patches to one domain while other domain may provide the service.
    Regards
    Shaan
    "Ratnakar Sonti" <[email protected]> wrote:
    >
    Hi,
    Here is my problem:
    My weblogic portal 7.0 application should run in 24x7 environment. The
    production
    system is running in a cluster mode with external staging. Both the managed
    servers
    are pointing to the same application sync database.
    So to give a solution to this problem, we are trying to bring down one
    managed
    server down and apply the patches into that managed server without bringing
    down
    the other. Since webflow files and entitlements needs to be synchronized
    with
    the portal database. If we perform a sync on the portal database, there
    might
    be a chance that it might corrupt the existing portal database state.
    Our deployment
    would not be complete unless we perform a sync on the other managed servers.
    So
    we could not able to update the latest pathces into the cluster without
    bringing
    down the cluster.
    What I would like to know is "Is there any work around to get rid of
    this problem?".
    I would be delighted if any one provides the solution.
    Thanks & Regards,
    Ratnakar

  • How to capture Vari Cam Footage with  PanasonicHD1200A

    Hi there. Thanks to those people who answered my previous question about the Vari Cam codec. I hate to say I am still a little confused.
    I should specifiy now that I am capturing footage from DVCPro tapes recorded on a Panonic Vari Cam (720p). The deck I am using is a panasonic HD1200A and I Have a AJA kona LS capture Card.
    I want to edit for final output for PAL, so 720x576 (it will be 4:3 letterboxed 16:9) and a frame rate of 25.
    So my question is which of Final Cut Pros many capture presets do I use. Do I need to downlaod a third party Codec.
    I tried using DVCPro HD 720p60 codec but this doesn't deliver the Data rate I was told to expect (14 mb/sec rather than 5.6mb/s). However it does seem to work. Will I simply have to scale the final movie to fit the proportions of PAL 4:3? As this is a green screen shoot how will my Key be effected by the Codec, GOP, P an B frames, or will final export with a quicktime conversion solve this. I appreciate your help in clearling up these mysterys of HD
    I am on a dual processor G5 with 3 gig of Ram.
    Thanks Sincerely
    Peter Stenhouse

    Great! It was shot at 720p25 (so i'm told) there was no use of the variable fps.
    I'm not delivering a DV master I want to deliver broadcast quality and as I also dong alot of post, a green screen key, I need the best quality possible. We shot on HD because, we originally we were going to shoot some slo mo. Typically the director changed his mind, didn't shoot any and now I am going through HD **** for no real reason (though the more filmic color space will be nice I am sure)
    Via Component sounds like a good idea, though I still need to adjust the deck to output 25fps rather than 30, which it somehow seems to be doing at the moment.
    Ordinarily I would capture from digibeta, but we only have the HD deck over the weekend so don't have the luxury of capturing offline RT and then onlining 8 bit uncompressed has I normally do. But I digress.
    I don't particularly want to have to work at 30 or 60 fps, beacues I never have before, and because the final output is for PAL Broadcast.
    I really appreciate your advice, the glimmers of hope that your words of wisdom provide.
    Sincerely
    Peter Stenhouse
    Excuse the ranting, I'm pretty stressed, I hate colliding with the first hurdle this hard.

  • Why freezing (mini 2011) and how to get out from there without shutting down?

    Still difficult to know why/what action/what behaviour, but why am I getting (at least once avery 4-5 hours of use, to be fair...), a hang/freeze (that kaleidoscope ball...) - sometimes with nothing special (it just happened as I was starting to write this message!...) ?
    I hear people who are going for years (or at least they claim it) without a single freeze or crash wth their Mac (reason why I invested in one mini, and soon another one...).
    Ok I would get it if I had 5 apps going on with 4GB of ram (still, depends which apps...). I get it with Photo Booth, I get it with Microsoft Office 2011 (a simple plain Word document), I get it surfing on Safari... So nothing very ''specific''.
    And sometimes, it is the shut down that freezes.... I come up hours later or the day after and realize it had not completed shut down (still that rolling wheel on the white background).
    I have all OS X (Lion) and other apps updates to date.
    So, to which extent is it ''normal'' to get a crash (or is it a crash ? - when I cannot go further and there is no other way but to force shut down physically (Power button)? - And is there another way to get out from there on a Mac ? (Being a Windows user, my automatic reflex would be Ctrl+Alt+Del... when this works...)
    Thanks,
    Rob

    You iPod encountered an error and has to be restored.
    Maybe a data recovery company can help get the info back..
    Also,
    - Maybe via How to perform iPad recovery for photos, videos
      Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official

  • How do I leave a website without shutting down FireFox?

    When I want to close a website page at the top of the screen, it closes Firefox instead and i have to
    reopen it. How do I close just the current web page, and not Firefox?

    hello, don't close the window on the top right if you want to continue your session in firefox, but just close the tab of that page or navigate to a different site (your homepage)...
    [[Use tabs to organize lots of websites in a single window]]

  • How to comment on large pdf without slowing down?

    I am using the commenting and annotations function to highlight and draw textboxes on a large pdf.  I have found as I go through the document the more of these I do the slower the function becomes (now taking appox 9-10 for each function, ie, to highlight, then to draw box, then to write in box) and am only about a quarter of the way through.  Is there a better/quicker way of markup up documents?

    Thank you for your response.
    I should have explained better and we have continued to work on this.  The initial work was done on a machine without a lot of memory. After moving to a machine with more memory, Acrobat is able to handle some files.  But on one with 7700 pages it get a message "And error was encounted while processing images".  And when that dialog is closed another comes up saying "Insufficeint data for an image" and then the hourglass stays up. It seems like it runs out of memory.
    In terms of what errors are in the file, what I do know is that Acrobat will put up the dialog saying "An error exists on this page. ... Contact the person who created the PDF document to correct the problem".
    I have tried the Preflight. I have tried the compliance with the Acrobat 5 and it doesn't find any errors. Some errors are reported on PDF/  Is there a way to find out what causes the initial reported error.  There are a lot of individual repairs that can be made, but this seems to be too much trial and error.  That is why I used the Save As Optimized, which does seem to work on smaller files, but does fail on the larger ones.
    Thank you for any suggestions,
    Jeff

  • HDV 24p capturing

    I purchased a Sony HDR FX1000 HDV camcorder. I recently shot a movie in 1080i 24p and had all kinds of trouble with the footage looking right. I have completed the project and trough a series of tricks and tweaks was able to make the footage look okay. It doesn't, however, look great.
    I was wondering if anyone knows how to capture HDV 1080i 24p footage in FCP? What settings do I need to use if I am capturing via firewire and what settings would I use in Compressor in order to burn the movie onto an SD DVD?
    Like I said, the other project is complete and I'm not going back to it, but I was just curious as to what to do right next time so I don't have these problems. Thanks.

    No such thing as 1080i 24p. With that camera you most likely shot at 1080 24p. Signals scanned at 24p/30p are converted to 60i (using 2-3 pull-down for 24p) and recorded on MiniDV tape, allowing footage to be played and edited using existing HDV products. In this way, progressive images can be handled in the conventional HDV editing environment. I capture all my HDV footage as ProRes 422. See Andrew Balis's article on Ken Stone's website: http://www.kenstone.net/fcphomepage/capture_hdv_prores_fwbalis.html
    In FCP export a Quicktime movie. Use that movie in Compressor to make your SD video. Start with "DVD: best quality, 90 minutes".
    --Bob

  • 24p footage in 30fps sequence is blurrier

    Hello,
    I'm about to load 20 hours of feature film footage shot on a dvx100b at 24p (regular, not adv.). Before importing a few shots of test footage I chose "DV-NTSC 24p" as Easy Set-up.
    Every clip brought into the timeline requires rendering, and when I looked at the clips I saw that despite my setting, they imported at 29.97.
    I'm willing to edit at 29.97 instead of sticking to 24p but here's the problem: I reset my Easy Setting as straight "DV-NTSC" and made a new sequence, and brought in the same clip as I'd loaded in the 24p sequence. A frame in the 29.97 sequence clip is notably less crisp than the identical frame in the 24p sequence clip.
    Intuitively it makes sense to edit in 24p and just pull down (push up?) to 30 when it's DVD-burnin' time. Otherwise, I'd be dealing with 20% of my frames duplicated in the edit and who needs that?
    Can I just bring in the footage at 24p and edit that way, or will the blur just come back? Thanks very much in advance for any help breaking through this bottleneck.
    Best,
    Sean
    Mac Pro 2.66   Mac OS X (10.4.6)   PowerBook G4 667

    Sean -- that's cool.
    Do keep this in mind when shooting with the DVX though...
    24p setting and 24pA setting:
    24p Setting is meant as a FILM LOOK setting. 24p setting will shoot from the CCDs 24 times a second but when it goes to tape it gets a pulldown cadence of 3.2 standard pulldown cadence - which means 2 frames are combined and added as 'interlaced' frames bringing the total frame count from 24 to 30 frames per second.
    This is for two reasons... 1) miniDV tape won't take anything other than 30 frames per second, and 2) the 3.2 cadence is the standard cadence used by TV folk to convert film to 30fps and is least offensive to the eye.
    Again, 24p setting on the dvx is to be used ONLY as a film look setting to be shown on standard 30fps display medium.
    NOW --
    24pA is when you want to shoot something and KEEP it in 24fps... either for film transfer or for 'perfect' film look on web or DVD (though as Pat says, the DVD player might be adding pulldown anyway --- which although I have the HIGHEST respect for Patrick... I've never heard myself before.)
    What happens here is again, lens to CCD all happens at 24 times a second... BUT when going to tape a different cadence is added ... one that is easier for FCP to remove. This is the 2.3.3.2 cadence. Same process as before... frames are combined into 'interlaced' frames (upper half frame A and lower half frame B) and added to the 24 fps to make 30fps.
    Now -- when capturing 24pA material, FCP will remove these 'interlaced' frames and return you to 24 progressive frames a second. PERFECT for film transfer.
    Hope this clears things up.
    CaptM

  • Can't capture HDV with Canon Legria hv40

    Hi,
    I'm having this very irritating problem - when I try to capture HDV(25) footage with Premiere Pro CS6 the program:
    recognizes the camera
    has control over camera navigation
    doesn't show preview in the capture window
    says it's capturing, but only captures audio from the camera (in mp3)
    I'm using FireWire and all the Premiere/camera settings are set to HDV.
    I can't figure out what the problem might be here.
    Any help greatly appreciated!
    Thanks

    I originally had this problem with a  #trial version of CS5.5 and it did exactly what you describe, (incidentally Sony Vegas Movie Studio Platinum 11 @ $75 USD, captures perfectly) ,but, on going to full version and upgrade to CS5.5.2 it has been working perfectly for the last 18 months. (It won't help you but, HDV Canon Capture in Premiere Pro 1.5.1. and that is 5+years old was/is very efficient)
    And later as well, just double check New Sequence > Presets > HDV 1080i 25 (50) or other .
    Click on Preset Descriptions it will show what it is doing.
    Good luck
    #Ps. This occurred in a downloaded trial version (Adobe may not have included the HDV/mpeg-2 codec or it may have been corrupted), but, there is no problem here on 2 x i7 64 bit computers running the program from disc.
    >    http://helpx.adobe.com/premiere-pro/kb/features-presets-missing-premiere-pro.htmlhttp:// This will probably open in Google ?
    This really is no help ?
    Message was edited by: Bob Dix Photographer

  • Cloning without shutting down the db

    Hi,
    Can you please suggest how to clone apps and db without shutting down the database? Apps is just copying the files, is there a recommended way to do the db cloning without shutting down the db.
    Updating the instance details:
    db - 10.2.0.4 on RHEL
    apps - 11.5.10.2
    -Jek
    Edited by: 890397 on Feb 2, 2012 5:31 AM

    You can find all the steps in the documentation (using RMAN or Hot backup).
    Cloning Oracle Application 11i /R12 with Rapid Clone - Database (9i/10g/11g) Using Hot Backup on Open Database [ID 760772.1]
    Cloning Oracle Applications Release 11i with Rapid Clone [ID 230672.1]
    Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Rapid+AND+Clone+AND+Documentation&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Rapid+AND+Clone+AND+RMAN&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Multiple Selection on JTree without holding down [CTRL] or [SHIFT]

    I need an example about how make multiple selection on JTree without holding down [CTRL] or [SHIFT].
    my JTree contains JCheckBox in any nodes, but I can't select two or more checkBox in time without holding down [CRTL] or [SHIFT].
    thanks for help.
    Jose A.

    I did this a few years ago so my newbiness is going to show through a bit, but I'm too lazy to update it.import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.tree.*;
    import java.util.*;
    public class Test3 extends JFrame {
      JTree jt = new JTree();
      MultiTreeSelectionModel mtsm = new MultiTreeSelectionModel(jt);
      JCheckBox multiCheck = new JCheckBox("Multi"),
          branchCheck = new JCheckBox("Branch");
      public Test3() {
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        JPanel content = (JPanel)getContentPane();
        multiCheck.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(ActionEvent e) {
                mtsm.setMultiSelect(multiCheck.isSelected());
        branchCheck.setText("Branch");
        branchCheck.addActionListener(new java.awt.event.ActionListener() {
          public void actionPerformed(ActionEvent e) {
                mtsm.setBranchSelect(branchCheck.isSelected());
        JPanel jp = new JPanel();
        jp.add(multiCheck);
        jp.add(branchCheck);
        content.add(jp, BorderLayout.NORTH);
        ActionListener specialKeyListener =
            new ActionListener() {
                public void actionPerformed(ActionEvent evt) {
                    MultiTreeSelectionModel.keyModifiers = evt.getModifiers();
        KeyStroke keyStroke;
        for (int i = 0; i < keys.length; i++) {
            keyStroke = KeyStroke.getKeyStroke(keys[0], 0, true);
    content.registerKeyboardAction(specialKeyListener, keyStroke,
    JComponent.WHEN_ANCESTOR_OF_FOCUSED_COMPONENT);
    keyStroke = KeyStroke.getKeyStroke(keys[i][0], keys[i][1], false);
    content.registerKeyboardAction(specialKeyListener, keyStroke,
    JComponent.WHEN_ANCESTOR_OF_FOCUSED_COMPONENT);
    jt.setSelectionModel(mtsm);
    content.add(new JScrollPane(jt), BorderLayout.CENTER);
    setSize(300, 300);
    setVisible(true);
    public static void main(String[] args) { new Test3(); }
    private static int[][] keys = {{KeyEvent.VK_CONTROL, ActionEvent.CTRL_MASK},
    {KeyEvent.VK_SHIFT, ActionEvent.SHIFT_MASK},
    {KeyEvent.VK_ALT, ActionEvent.ALT_MASK}};
    class MultiTreeSelectionModel extends DefaultTreeSelectionModel {
    static int keyModifiers;
    private boolean branchSelect, multiSelect;
    private JTree tree;
    private TreePath[] savePaths;
    MultiTreeSelectionModel(JTree Tree) {
    tree = Tree;
    setSelectionMode(TreeSelectionModel.DISCONTIGUOUS_TREE_SELECTION);
    private boolean isSelected(TreePath Path) {
    return tree.isPathSelected(Path) && (keyModifiers & KeyEvent.SHIFT_MASK) == 0;
    private boolean branchSelect() {
    return branchSelect || ((keyModifiers & KeyEvent.ALT_MASK) != 0);
    public void addSelectionPaths(TreePath[] paths) {
    if (branchSelect()) paths = getAllPaths(paths);
    super.addSelectionPaths(paths);
    public void removeSelectionPaths(TreePath[] paths) {
    if (branchSelect()) paths = getAllPaths(paths);
    super.removeSelectionPaths(paths);
    public void setSelectionPaths(TreePath[] paths) {
    if (branchSelect()) {
    paths = getAllPaths(paths);
    if (paths != null && paths.length > 0 && isSelected(paths[0])) {
    super.removeSelectionPaths(paths);
    } else if (multiSelect) super.addSelectionPaths(paths);
    else super.setSelectionPaths(paths);
    protected TreePath[] getAllPaths(TreePath[] paths) {
    if (paths == null || paths.length == 0) {
    return paths;
    Vector vector = new Vector();
    DefaultMutableTreeNode treeNode, thisNode;
    for (int i = 0; i < paths.length; i++) {
    if (paths[i] != null) {
    thisNode = (DefaultMutableTreeNode) paths[i].getLastPathComponent();
    Enumeration enumeration = thisNode.preorderEnumeration();
    while (enumeration.hasMoreElements()) {
    // add all descendants to vector
    treeNode = (DefaultMutableTreeNode) enumeration.nextElement();
    TreePath treePath = new TreePath(treeNode.getPath());
    vector.add(treePath);
    int i = vector.size();
    TreePath[] allpaths = new TreePath[i];
    for (int j = 0; j < i; j++) {
    allpaths[j] = (TreePath) vector.elementAt(j);
    return allpaths;
    protected void setMultiSelect(boolean b) { multiSelect = b; }
    protected boolean isMultiSelect() { return multiSelect; }
    protected void setBranchSelect(boolean b) { branchSelect = b; }
    protected boolean isBranchSelect() { return branchSelect; }
    protected void savePaths(TreePath Path) {
    TreePath[] tmpPaths = getSelectionPaths();
    if (tmpPaths == null) {
    savePaths = null;
    } else {
    int cnt = 0;
    for (int i = 0; i < tmpPaths.length; i++) {
    if (tmpPaths[i].isDescendant(Path)) {
    cnt++;
    savePaths = new TreePath[cnt];
    cnt = 0;
    for (int i = 0; i < tmpPaths.length; i++) {
    if (tmpPaths[i].equals(Path) || tmpPaths[i].isDescendant(Path)) {
    savePaths[cnt++] = tmpPaths[i];
    protected void restorePaths() {
    if (savePaths != null) {
    final DefaultTreeSelectionModel foo = this;
    SwingUtilities.invokeLater(
    new Runnable() {
    public void run() {
    foo.setSelectionPaths(savePaths);

  • Tuxedo transaction branch in GMTREADY and cannot finishit without shutting down weblogic server

    Trying to reproduce a problem in an application we are deployed a servlet in a
    weblogic 8.1 sp2 server, doing the folowing:
    1. Begin a transaction
    2. Call a tuxedo service (tuxedo 6.5) via tuxedo gateway "A"
    3. Call another tuxedo service (tuxedo 6.5) via tuxedo gateway "B"
    4. Before commit the transaction in the servlet, we shutdown tuxedo gateway "B"
    5. After commit transaction branch via gateway "A" remains indefinitely in GMTREADY
    state, while transaction branch via gateway "B" gets GMTABRTONLY after timming
    out.
    After commit(that fail doing rollback), transaction is not reported like inflight
    in weblogic server. We cannot finish transaction branch in GMTREADY state. Only
    after shutdown weblogic server, and after an undetermined time(sometimes a lot)
    transaction branch is rolled back.
    While transaccion is not rolled back, all locks in DB remains active.
    How we could finnish that branch without shutting down weblogic server, or, if
    not, how we could control the time in witch transaction is rolled back?

    We open a case with BEA eSupport and the servlet problem was a bug. Engineering
    got a
    temporary patch that seems to solve the problem. The case continues trying to
    solve our original problem (the servlet was to reproduce the situation).
    Thank you very much.
    Jose Emilio Ortega.
    "Todd Little" <[email protected]> wrote:
    >
    Hi Jose,
    Can you provide a little more information. In particular, what are the
    JTA timeout
    values configured for your WLS application? Did you set the interoperate
    setting
    to Yes under the WTC local access point's connection settings? When
    you begin
    the transaction in the servlet, do you specify a timeout value and if
    not, do
    you know what your thread's default transaction timeout value is?
    If possible, can you post or e-mail your WLS's config.xml and the domain
    configuration
    files for the two Tuxedo domains (not the UBB files, although those would
    be helpful
    as well.)
    Thanks,
    Todd
    "Jose Emilio Ortega" <[email protected]> wrote:
    Trying to reproduce a problem in an application we are deployed a servlet
    in a
    weblogic 8.1 sp2 server, doing the folowing:
    1. Begin a transaction
    2. Call a tuxedo service (tuxedo 6.5) via tuxedo gateway "A"
    3. Call another tuxedo service (tuxedo 6.5) via tuxedo gateway "B"
    4. Before commit the transaction in the servlet, we shutdown tuxedo
    gateway "B"
    5. After commit transaction branch via gateway "A" remains indefinitely
    in GMTREADY
    state, while transaction branch via gateway "B" gets GMTABRTONLY after
    timming
    out.
    After commit(that fail doing rollback), transaction is not reportedlike
    inflight
    in weblogic server. We cannot finish transaction branch in GMTREADYstate.
    Only
    after shutdown weblogic server, and after an undetermined time(sometimes
    a lot)
    transaction branch is rolled back.
    While transaccion is not rolled back, all locks in DB remains active.
    How we could finnish that branch without shutting down weblogic server,
    or, if
    not, how we could control the time in witch transaction is rolled back?

  • Shutdown CRS without shuting down database?

    hi forum
    It's all know that if I shutdown the CRS, the CRS daemon will shutdown the database as part of it shutdown procedure.
    How can I shutdown the CRS without shuting down the database ?
    Thank you for your time.

    hi all
    I have found the solution:
    follow steps below:
    1) use crs_stop to stop the database resource
    2) use srvctl remove to remove the database
    3) startup the database
    Now the database is not under control of the CRS.
    You can later use srvctl add database back to the CRS if you want the CRS manages the database for you.
    Thanks for your time.

Maybe you are looking for