How to capture photo of screen while in skype

how to capture photo of screen while in skype on Ipad2

press the home button and the top power button at the same time. your screen will flash white and the image will be in your camera roll.

Similar Messages

  • How to Fill the selection screen while calling the transaction

    Hi All,
             my requirement is in one of the screen while i will press a push button it will call one transaction and it will fill the selection screen build order number field and skip the first screen i.e the selection screen it will show the output of that report directly.
    am using this code .
    case sy-ucomm.
    while 'FSLR'.
    set PARAMETER ID 'ANR' FIELD aufnr.
    RANGES s_aufnr FOR afko-aufnr.
          s_aufnr-sign   = 'I'.
          s_aufnr-option = 'EQ'.
          s_aufnr-low    = aufnr.
          APPEND s_aufnr.
    CALL TRANSACTION 'ZFS1' USING s_aufnr
         MODE 'E' .
        AND SKIP FIRST SCREEN.
    endcase.
    here the problem is i cant use both skip screen and using at a time nither the screen is filling nor its skipping the first screen.
    but its not working would any one please help how can i do this functionality?

    Hi
    Do in this way.
    DATA: rspar TYPE TABLE OF rsparams WITH HEADER LINE.
    rspar-selname = 'S_AUFNR'.
    rspar-kind = 'S'.
    rspar-sign = 'I'.
    rspar-option = 'EQ'.
    rspar-low = 'aufnr'.
    APPEND rspar.
    SUBMIT zfs1_prog  VIA SELECTION-SCREEN WITH SELECTION-TABLE rspar AND RETURN.
    If this doesnt suit yer requirement, I wud suggest you to use BDC as below.
    CALL TRANSACTION 'SE11' USING bdcdata
                           MODE   'E'
                           UPDATE 'A'.

  • How can I have full screen while using yahoo or safari on my iPad air 2

    How can I have full screen on my iPad air 2 with out having bookmarks as part of the screen

    Try quitting Safari like I describe, then reset the iPad. Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
    I would also suggest that you check to make sure that you have enough free space on your iPad for it to run efficiently. With iOS 8 it is recommended that you have 15-20% of the storage space on the device free.  For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.

  • How to skip the Selection screen while using BAPI_MATERIAL_DELETE

    Hi,
    I have to delete material master.
    I'm using BAPI_MATERIAL_DELETE Fm,
    But while executing this BAPI it is going to a screen where it is asking to tick the Check Box for material number.
    Can you please tell me how to execute the BAPI Avoiding the selection screen.
    Thanks & Regards,
    Rajender

    Hi,
    Thanks for replying.
    We have to run the BAPI in Background, Then how to achieve the default values.
    Thanks & Regards,
    Rajender.

  • How to view photos full screen in iOS7

    How do I view my photos without the white box around it with the trash can, air drop, camera roll & edit icons showing? I used to be able to see just the photo and now it looks smaller and surrounded by all this other info.

    Tap the photo once - very much appreciated!!
    It is just so frustrating when after Apple upgrades you have to Google around for 30 minutes to find out how to make things work how they used to ...
    Thank you, Keith

  • Help: Capturing photos from camera while iPod sync

    Big problem...
    I started my canon sd600 camera to start capturing 90 pictures from my wife's birthay, but I was also sincronizing my ipod and both libraries are in an external LaCie drive.
    Immediately after I turned on camera, the iPod Sync failed and also all pictures within iPhoto dissapeared... they were showing an admiration mark... I could only see the pictures just imported from the camera...
    The only way I was able to see all pictures was to quit iPhoto and choose again the library. However, when I did this... there were NO pictures just captured!!!!!
    Sadly I selected to delete the pictures in my camera after downloading them... Now I lost 90 pictures...
    I believe they have to be somewhere since they were effectively captured... just need help to find them!
    Can anyone of you friends help me?
    MacBook Pro 17   Mac OS X (10.4.9)   External HD LaCie

    Aquarius6502
    Do a search on Macupdate using 'recover photos' and you'll get a lot of suggestions for Software that will recover the photos from your card.
    Regards
    TD

  • Capturing the login screen

    Hello,
    I am using a MacBook, OS 10.5.7. I would like to capture the login screen for a handout that I am preparing for our users. However, the key combinations: cmdshift4 and cmdshift3 don't seem to function at the login screen phase.
    Does anyone know how to capture the login screen?
    Thanks in advance.
    HK

    Click here for information.
    (45574)

  • Display splash screen while downloading applet jar file

    I've tried to search the forums, but most results I get are how to display a splash screen while the classes are loading. Unfortunately, the classes do not begin loading until after the jar file has been downloaded. How does one go about showing as splash screen as the jar file containing the classes is downloaded?
    Thanks for the help!

    "Java 5 provides a capability in this area"- Unfortunately, due to circumstances out of our control we are stuck on java 1.4.x.
    "How you do that is your problem."- I'm so glad I can count on the helpful java community. Thanks.
    Since it appears that "warnerja" is discusted by my question (mabye had a bad day) and is leaving me out in the cold, does anyone have any ideas on how I can implement her/his suggestion. I can break my jar file into multiple seperate jars and as each one loads I can update a progress bar. Unfortunately, I do not know where to begin with this code wise nor do I know if this is the best solution to this problem. I would think this to be a common problem.
    Thanks for your help!

  • How can I get the AirPlay information box to stop floating around my screen while looking at photos?

    How can I get the AirPlay information box to stop floating around my screen while looking at photos?

    Thanks for answering
    Well, the CS2 was my 1st full program that now my son is using in his new Laptop...
    The CS4 Master Collection is my full program that I bought when I was in College course and now I use for my own works...
    Both came in their own serial numbers and discs ... I install both completely to each computer but at the end on the registration asked for this "Validation code" and the message says that I can't do it on-line nor by mail; so to call to this phone 1-800-833-6687 and in there have the message to come to the "support " Adobe website and do all this going around.
    Now I saw previously that page you send me... I really don't understand it ... I got CS2 installed but I just need the validation code to get rid of that 30 days message...
    Why I have to uninstall it??? Could you explain me please..

  • How to capture the screen and send it to attachment for that mail

    hi sir ,
         how to capture the screen shot and attach with that e-mail , whether it is possible or not ..
    Regards,
    kumar

    hi sir,
        i am asking about while creating the support message from help menu in sap..
    while creating the support message we have to give component , priority and text also .. after that click the send icon in that support desk message .. while clicking the send button the entire screen ( what  we have entered in that creen na ) i have to capture the screen ( it may be save in local file also )  after that it will attach into attachment and then send it to ...
    Regards,
    kumar

  • Question: How to connect my iPad with iTunes since it show that in iPad screen while it is not working?

    My iPad not working and show message in the screen to connect to iTunes, So how i can connect to iTunes while it is not working is through my computer and do i need to download iTunes first?
    Thank you

    When your iPad wants to be connected to a computer with itunes, yes itunes need to be on the computer. Click here to Down Load iTunes.

  • How can I get the screen to lock on my iPhone 4, so I don't press buttons while talking?

    I just upgraded to the iPhone 4.  When I am talking on the phone, the screen doesn't lock, so I am constantly pressing buttons or hanging up on the person I'm talking to.  How can I get the screen to lock while I'm talking?  It's driving me NUTS.

    The otterbox is one of the culprits. Take the phone out of the case and see if it still happens. If so it is not the case. If the problem goes away, then you may need to make the hole slightly larger. My family has three iPhone 4's in otterboxes and none have this problem. Other users on this forum have reported success with the above methods.

  • How to capture changed data at ALV screen

    Hi ALV Experts,
    I am using Following method for ALV display :-
      CALL METHOD g_alv_grid_0200->set_table_for_first_display
        EXPORTING
          i_bypassing_buffer            = 'X'
          is_layout                          =
          it_toolbar_excluding          =
        CHANGING
          it_outtab                          =
          it_fieldcatalog                   =
      CALL METHOD g_alv_grid_0200->set_ready_for_input
        EXPORTING
          i_ready_for_input = '1'.
    Now I am changing few values in ALV screen and capturing through following Method :-
      CALL METHOD g_alv_grid_0200->check_changed_data
        IMPORTING
          e_valid = l_valid.
    THIS ABOVE METHOD STRANGELY CAPTURES CHANGES IN QUANTITY AND DATE FIELDS ONLY AND NOT IN CHARATER FIELDS.
    Can somebody suggest how to capture changes of character fields also.
    Thanks in Advance,
    Chandan

    Hi,
    Check whether the following logic helps.
    p_er_data_changed TYPE REF TO cl_alv_changed_data_protocol.
    DATA :
        lwa_mod_cell TYPE lvc_s_modi,
        lwa_mod      TYPE ty_mod.
    LOOP AT p_er_data_changed->mt_good_cells INTO lwa_mod_cell.
        lwa_mod-row  = lwa_mod_cell-row_id.
        APPEND lwa_mod TO i_mod.
    ENDLOOP.
    Regards,
    Lohitha

  • How to switch off screen while playing songs in 5G iPod

    Any ideas how to switch off the screen completely (not just reducing the brightness) while playing the songs.
    i'm thinking that this could improve the battery life !!!
    30GB Video iPod   Windows XP Pro  

    No you can not do this; you can only turn off the Backlight.

  • How do I perform a screen capture to print or save?

    How do I perform a screen capture to print or save?

    Press the Shift, Command, and 3 keys to capture the whole screen.
    Press the Shift, Command, and 4 keys to capture a draggable part of the screen, or follow it with the spacebar to capture a window.
    Open the PNG on the desktop. Alternatively, combine either of the above with the Control key to put the screenshot onto the clipboard instead of the desktop.
    (116647)

Maybe you are looking for