How to capture show layer and hide layer event in photoshop through a plugin???

How to capture show layer and hide layer event in photoshop through a plugin???for mac

Use the Listener plug-in found in the SDK to see how you can monitor the show/hide layer event. You can also use the Getter plug-in to show what information you can find out about the current state of Photoshop.

Similar Messages

  • How copy a layer and its layer mask to another image?

    Using PSE9, how can a copy a layer and its layer mask to another image?
    The on-line help contains a topic on how to copy a layer but trying the different methods in the help topic results in either nothing being copied or just the layer without its layer mask being copied.  Thanks.

    How are you copying?  If you float your images, so they are both partially visible in the work area, make the one with the to be copied layer active.  Then drag the layer from the layers palette onto the other image.  Now you should have both the layer and the mask on the second image.
    Juergen

  • Link symbol (Hand symbol) in " Show all" and "Hide all"

    Hi peter,
    With respect to the same topic posted by me, can u help me in
    one more requirement (definitely simple for u)
    When i try to click these show all/hideall buttons (the hand
    symbol) should appear which usually appears when we click any
    link.....how this can be done........

    Hi peter, apart from adding the cursor pointer (per ur
    guidance), i also add some "screen tip text" (For ex. "Click to
    view instructions of all fields)...i included the tag <a
    title="Click to view -----------">
    i'm getting the same screen tip text for both "Show all" and
    "Hide all" buttons (that is obvious)
    If i click "Hide all" button, i want the screen tip text as:
    "Click to hide all instructions"..............probably i need to
    change this in the "showhide.js" (how to do this).............can
    you help me to achieve even this :-) Thankx a lot in advance :-)
    Note: You may thing that this screen tip text is not required
    for these two buttons (as it is self-explanatory) (I too
    know)..........however, i can use this method in any other
    requirement...........

  • How to capture the date and time of  a background job

    Hi experts,
    How to capture the date and time of  a background job?
    How to find whether it is runned succesfully or not?
    If it is not successful how to put error message?
    ASAP
    Thanx in advance,
    Sudha

    To Display the STATUS of the JOB which is exectued in background
      CLEAR : wa_jobsteplist.
      REFRESH : i_jobsteplist.
      WRITE:/ 'DISPLAYING JOB STATUS'.
      CALL FUNCTION 'BP_JOB_READ'
        EXPORTING
          job_read_jobcount           = w_jobcount
          job_read_jobname            = w_jobname
          job_read_opcode             = '20'
        JOB_STEP_NUMBER             =
       IMPORTING
         job_read_jobhead            = wa_jobhead
       TABLES
         job_read_steplist           = i_jobsteplist
    CHANGING
       RET                         =
       EXCEPTIONS
         invalid_opcode              = 1
         job_doesnt_exist            = 2
         job_doesnt_have_steps       = 3
         OTHERS                      = 4
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    To Display the status text as per the status type
      CASE wa_jobhead-status.
        WHEN 'S'. WRITE: / 'Scheduled'.
        WHEN 'R'. WRITE: / 'Released'.
        WHEN 'F'. WRITE: / 'Completed'.
        WHEN 'A'. WRITE: / 'Cancelled'.
        WHEN OTHERS.
      ENDCASE.

  • How do i show date and time info of videos in Iphone as they appeare before import in iPhoto?

    How do i show date and time info of videos in Iphone as they appeare before import in iPhoto? or even as they appear on the iPhone itself? The selection on tool bar for show info is greyed out.

    Welcome T G Brown to the  iMovie boards..
    the socalled timestamp is within the imports.. if you select a clip in iM and hit the key combo Apple-I, you can see recording time and date.
    unfortunately, this info isn't delivered to any software. Bruce Gee (geethree.com, excellent plug-in maker) told us, there's no 'API' he could use for such a feature...
    same on the pro side, read this discussion at the FinalCutExpress boards:
    http://discussions.apple.com/message.jspa?messageID=7982935
    Forum member Ian offers a solution with a 3rd party app ....
    so: pen&pencil and typing timestamp manually into any 'Title' seems to be your only option...

  • I suggest maintaining the "Layer" and "Group" concept as in Photoshop

    Another one I see many people asking about is the ability to "Name" the boxes. Box. Box, Box, Box, is not too intuitive.
    I am also going to suggest maintaining the "Layer" and "Group" concept as in Photoshop to soften the learning curve for new users.
    I currently have boxes that are NOT grouped, but behaving like a group if I try to move them. Kinda frustrating.

    You can double click on a Div in the DOM panel to rename any 'layer' or 'group'
    You can also degroup and regroup grouped elements by clicking on the little grouped icon which might be why your group isn't behaving like a group.

  • OSB: The different between transportation layer and security layer

    Dear All,
    Do you have any idea for compare about security on service bus between transportation layer and message layer?
    Which one is better? And do you have any factor to consider which one I should use?
    Best REgards,

    If you are working with OSB 11g, please refer -
    http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/part_sg.htm#sthref1029
    Ofcourse you would like to have both of them if you want a healthy system. If your OSB services are internet facing then it is a sensible decision to have both transport (a bare minimum) & message security. If your services are exposed to a LAN/WAN then you may have either or both of them. Remember, securitiy processing is always an overhaed to the performance so should be used as and when required only.
    Regards,
    Anuj

  • HT4314 how can i download games and application on my i phone through computer and internet

    how can i download games and application in my i phone through i tunes with connection of laptop

    Hi grampaz,
    A Windows 7 smartphone does not support HP ePrint Home & biz app if that's what you are referring to.  You can use ePrint with any email-capable device and print to an ePrint enabled printer.  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02759940&tmp_task=useCategory&cc=us&dlc=en&lang...
    I am an HP employee

  • How to copy a black and white layer to the mask of another layer.....

    Earlier I asked, "How?"
    Got a reply, but the solution didn't work in PSE 10. 
    After trial and error, I figured it out.
    When dealing with abstract art or even hair, it is too time consuming to make a
    mask pixel by pixel.
    Load the image you want to mask into a new layer and convert it to black and white.  You might need to
    adjust contrast/brightness to maximize the effect..
    Using the Magic Wand tool, click on the WHITE area of the image.   
    Click Edit/Copy.
    Click on the layer you want the mask copied to.
    Next, click on "Add new layer mask" button on the bottom of the layers panel. 
    Your mask should appear and is now ready for a touching up!.

    What’s the correct way to proceed?
    Joke?
    In Photoshop there are often more ways than one to achieve a task and none of them need be considered »wrong« as long as the result fits the intention, so »the correct way« seems to be problematic terminology.
    Anyway, one can use a Layer set to Blend Mode Color and paint on that with whatever colors.
    Or one can use Solid Color Layers set to Blend Mode Color.
    Or Hue/Saturation Layers …
    To edit contrast if necessary Curves or Levels Adjustment Layers can be employed.
    You could also have googled »photoshop colorize black and white« …

  • Regd : Integration Between Portal Layer And Process Layer

    Hi Experts,
       I have a query regarding the integration between Portal layer and the process layer in CE. How does the interaction happens or what is the process behind the integration of these two layers. I was going through some help documents at help.sap.com.
    But from there I could not get much of information. So need your inputs on the same.
    Thanks
    Pradipta Kumar Mishra

    Hi Pradipta,
    If you are referring to Guided Procedures as the "Process Layer", then you have one of the three options that I can think of:
    1) Deliver the GP processes via UWL in CE Portal
    2) Deliver the GP processes via UWL in EP (if your organization has one)
    3) Delvier the GP processes via GP Runtime in CE Portal
    Of the three mentioned above, option 2 is preferred since your business users get to access their tasks via a single interface. But you need a EP. If that's not the case, I would suggest Option 1. For integrating GP and UWL, please refer to following link.
    http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/frameset.htm
    Thanks!
    - Rao

  • How do I Show date and time when I hover over clip like in iMovie

    How do I get FCPX 10.6 to show date and time when I hover over a clip? I can so it in I movie and as I move over my clips the date/time is shown. I need it for that specific point in the clip not just the record start time.

    I realize that my needs are outside of the normal editing workflow. I am a private investigator and last week I shot over 6 hours of surveillance video on a Sony video camera. Within this 6 hours of video there is at most 2 minutes of actual footage of my subject. So what I wanted to do was just import the parts of the clip I want, so I can avoid importing the whole 6 hours, and then add a text title of some sort that shows the date/time. My problem is that once I get this clip I have easy way of establising the TOD short of taking the clip capture time and then counting up using the SMTPE Timecode. In this regard iMovie makes it easier because I can just hover over the clip and see the TOD of that specific frame. iMovie on the other hand would force me to import the whole 6 hour video so i'm left moving between both programs which is less than ideal.

  • How to capture the screen and send it to attachment for that mail

    hi sir ,
         how to capture the screen shot and attach with that e-mail , whether it is possible or not ..
    Regards,
    kumar

    hi sir,
        i am asking about while creating the support message from help menu in sap..
    while creating the support message we have to give component , priority and text also .. after that click the send icon in that support desk message .. while clicking the send button the entire screen ( what  we have entered in that creen na ) i have to capture the screen ( it may be save in local file also )  after that it will attach into attachment and then send it to ...
    Regards,
    kumar

  • How to capture user name and date in the database

    How to capture the person name who edits the application and the date of edit in the database...
    Pallavi

    Hi
    There are substitution strings you can use for this purpose.
    1.APP_USER ------is the current user running the application
    2.SYSDATE --------represents the current date on the database server
    APP_USER Syntax
    Bind variable------ :APP_USER
    PL/SQL------- V('APP_USER')
    Substitution string---------- &APP_USER.
    SYSDATE_YYYYMMDD Syntax
    Bind variable------- :SYSDATE_YYYYMMDD
    Direct PL/SQL------- APEX_APPLICATION.G_SYSDATE (DATE DATATYPE)
    PL/SQL-------- V('SYSDATE_YYYYMMDD')
    Your application will be based on a table with primary key column. You create a 'before update trigger' on that table and add columns 'UPDATED_ON' and 'UPDATED_BY' to that table. Add the following to that trigger:
    :NEW.UPDATED_ON := SYSDATE;
    SELECT V('APP_USER') INTO :NEW.UPDATED_BY FROM DUAL;
    -Priyanka

  • Linking photo layer and name layer

    I am producing a large number of memorymates and would like to link the individual photo layer with the corresponding name layer to simplify printing.  Is this practical in cs4?

    I would also look at Layer Sets, where the student's image Layer and their Text Layer would be grouped and linked, and their name can be used in the Layer Set too.
    This is rather like a DVD/BD Menu, where each Button is a Layer Set, and all Assets for that Button, graphics, Text, Shapes, Sub-picture Highlight Layer, etc., will be grouped inside that Layer Set. The Layer Sets are automatically named Button 1, Button 2, etc., but one can easily change those to say, Scene 01, etc.
    Good luck, and hope that gets you what you want and need.
    Hunt
    PS you can even assign separate colors to the Layer Set icons, to help you identify them, if you wish. Say yellow for the top row of students, green for the next, and so on.

  • Diffence between physical layer and BMM layer

    Hi all,
    Please let me know the difference between Physical layer design and BMM layer design. Please write your views in your reply instead of links.
    regards
    chandra kanth.

    chandra kanth.,
    Use in the layers
    The physical layer is the layer of the Logical Business Model where you define the physical data model of your data source. It contains information about the physical data sources.
    The most common way to create the schema in the Physical layer is by importing metadata (table, view, …) from databases and other data sources. If you import metadata, many of the properties are configured automatically based on the information gathered during the import process. You can also define other attributes of the physical data source, such as join relationships, that might not exist in the data source metadata.
    In the Business Model
    In the business model, OBI recommends using complex logical joins instead of foreign key logical joins.
    When Complex joins are used in the business layer then they are really acting as placeholders. They allow the OBI Server to decide on which are the best joins define in the Physical Layer to satisfy the request.
    In a Dimension, you may have multiple Logical Table sources that all join to one fact table. The OBI Server will then decide the best joins to use to meet the requirements.

Maybe you are looking for