How to capture snapshot in Win XP in boot camp

My Mac Book is booting in Win XP. How can I capture snapshot.

Not exactly a Mac question but a Windows operation question. For starters post over in the Boot Camp forum:
http://discussions.apple.com/category.jspa?categoryID=237
Other than that speak to your Windows friends.

Similar Messages

How much disk space is needed to run Boot Camp using Windows XP?

How much disk space is needed to run Boot Camp using Windows XP?

The hatter wrote:
But you can't install XP if you have a new Mac.
Try running XP in a VM or aquire Windows 7 which is the only one supported now.
And you will need more like 60GB for Windows 7, so I would skip on 20GB just to be safe.
20G is a fine minimum for XP, I was not responding to any inquiry about Win 7.

Macbook pro retina 15 with win 7 in boot camp in games becomes hot and low graphics

hi i have macbook pro retina 15 and i installed win 7 with boot camp but when i want play games the first 2 minutes is good but the next minutes the macbook becomes very hot and graphics going very low i tried osx 10.8 but still not working. i tried command option shift power when mac is plugged in and off but still not working
does any one know solution of this problem??
<Edited by Host>

Hi All,
I tried this and it improved my FPS in games yesterday, still not getting FPS I would desire, but its become playable.
Repasted here from another thread:
My retina MacBook Pro has had terrible graphics performance problems for a couple of weeks. I searched all over various forums and tried everything: resetting SCM, manually selecting discrete/integrated graphics card, deleting graphics kexts, etc. Nothing helped until I found this: https://discussions.apple.com/message/19880198#19880198
Now my rMBP has silky smooth graphics again!
The directions in that post are a little hard to understand so I cleaned them up here:
Step 1: Delete system windowserver preferences
In the Finder, from the menu bar, select "Go -> Go to Folder..."
Enter: /Library/Preferences/
Delete the file called com.apple.windowserver.plist
Step 2: Delete user windowserver preferences
In the Finder, from the menu bar, select "Go -> Go to Folder..."
Enter: ~/Library/Preferences/ByHost/
Delete all files that start with com.apple.windowserver (On my rMBP, there was one file called com.apple.windowserver.12AFB147-95D6-5C70-8F62-C1E4F2BE81BE)
Step 3: Reset the PRAM (These instructions are from http://support.apple.com/kb/HT1379)
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Hopefully this helps others with bad graphics performance on retina MacBook Pros.
For anyone that wants to check out the problematic plists from my rMBP, here are the files:
http://jherrman.com/slow-rmbp-2012/com.apple.windowserver.plist
http://jherrman.com/slow-rmbp-2012/com.apple.windowserver.12AFB147-95D6-5C70-8F6 2-C1E4F2BE81BE.plist
Jeremy Herrman

Can I install Win XP with Boot Camp?

I have a need to install a copy of Win XP but Boot Camp doesn't seem to support it. Is there any way around this?

Not the answer I wanted to hear but it was what I expected. I have Parallels but I really needed the Boot Camp installation.
Thanks,
Rick

HT3986 HOW TO INSTALL WIN 7 VIA BOOT CAMP ON MAC BOOK PRO 15".

hi everyone , I m new to this forum. I wish to know the process of installing the Win 7 on macbook pro if my superdrive is not working.
Kindly help...i need to install it urgently...I cant use the applications in parallel environment.

Have you tried a USB installer?
Boot Camp Assistant will now ask if you want to install the Windows installer with the Boot Camp Dirvers onto a USB drive on some supported and not so support machines.
Do a search for "Windows USB installer" on Yahoo/Google and there should be quite a few.

How do you Install Win XP using Boot Camp without use of an optical drive?

So I'm about at my wits end. I'm try to get Windows XP on my OS 10.5.5 MacBook Pro. I've run into what seems to be a bit of a dead in. Unfortunately my optical drive has gone stupid on me and won't allow me to get through the entire set-up. The Mac has know trouble seeing the Installation Disc. After my partition has been created and I click start Windows Installer, the computer reboots in a normal fashion up to when you get the apple with spinning progress wheel. At this point the screen goes black and I get a "-" blinking in the top right corner of the screen. I figure it's just trying to boot from Win Install disk but it just kinda sits there. So here's my question. Is there some way to boot this Windows Installation from anything else but the CD? I luckily have an image of the WinXP CD in about 5 formats. I'm going absolutely crazy because I had just Installed WinXP not more than an hour before I ran into this initial problem but wanted to change the WinXP partition to FAT 32 as opposed to the NTSC format I accidently used. I would really appriciate any help in my dark hour.
System Info
MacBook Pro 4.1
Mac OS 10.5.5
Bootcamp 2.1
Windows XP with Service Pack 2
HL-DT-ST DVDRW GSA-S10N
System was just recently re-installed with fresh copy of a software and updates.

Kirkdan:
I really would like to help you and get your issue resolved in your dark hour as you said. I am afraid that I do not have good news for you. This is because the limitation put on by this entire process of installing Windows via boot camp.
The answer to you question to install windows from any other medium other than your built-in optical drive is a NO. This won't work since once Windows begins to install then it will not have all the drivers installed to recognize the external CD drive (USB/Firewire) and installation will halt.
Axel F.

Can't install win 7 using boot camp in Lion

Hi !
help please!!
i can't install win 7 (any version) on my MBP 13", i'm running Lion and that's when it all started!
had no problem on SL using boot camp and win 7 but now my win 7 installation just stops on last
install step screen and that screen is there forever...
did my steps like i've always did it using snow leopard and now it just won't work...

Are you trying to install the 64 bit version of Windows 7? I get exactly the same problem. I'm going to try the 32bit version and see how I get on. I don't think 64 bit is supported just yet.

Cannot install win xp by boot camp

acturally, I install the Win Xp sp2 before, but I found the network very unstable, so I uninstall it. and the HD has already separated in two parts. however, when I want to install the win xp sp2 again, the Boot Camp showed that it cannot install in the HD which has two parts. to , How can I combin the two parts as original? use boot camp or others? thank you so much`!!

My guess is you deleted the Windows OS not using Boot Camp Assistant (which for future reference is the easiest way to to do it) & now you have an empty partition plus the normal OS X one, what you call 'separated parts.'
If so, just as the Boot Camp documentation mentions, Boot Camp Assistant will refuse to set up the drive for Windows since it only does this for a drive with a single OS X partition.
One simple solution is to run Disk Utility, select your HD from the list (not the volume name like "Macintosh HD" indented under it), & click on the "Partitions" tab. Locate the empty Windows partition in the window -- it should be the lower one of the two you see -- & click the minus button to remove it. Then drag the tab at the bottom right of the OS X partition down all the way to the bottom so that it uses all the space the just deleted partition occupied. Click Apply, wait for the procedure to end, & quit Disk Utility.
Now run Boot Camp Assistant again, following the instructions in the documentation, & it should be fine.

Features in win XP via boot camp

has anyone found ways to make some of the mac features work in windows?
for example, in order to get to the task manager u have to manually run it, because windows thinks your delete key is a "backspace" and the mac dosen't have a delete key. this makes it hard to hit ctrl-alt-del.
perhaps the biggest thing that will be a problem is the ability to right click. anyone know how to set a shift-click or something to be a right click?
Also, the volume and brightness keys do not seem to work in win xp.
and, the 2 fingered scrolling seems to be a constant anoyance to not have in windows.
other than that everything seems to be working good for me constantly switching between windows and mac.
black mb Mac OS X (10.4.6)

The key board issues can be alleviated via a keyboard mapper, just google it. As for right click, this utility will make it happen for you http://tinyurl.com/gbmmh
Brightness should work via a icon in the windows tool tray (next to clock). There should be a icon that looks like a screen, click it and it'll allow you to increase/decrease screen brightness. That should have been installed with the boot camp driver disk you created. Volume same thing, use the sound icon in the task bar.
CTRL-ALT-DEL can be accessed via right clicking the task bar and chosing task manager.
You can't two finger scroll however. If you're not doing games or video editing in windows you may wish to get parallels which will allow you to run XP while in OS X and most everything works and quite well, including two finger scrolling.
Nick

How do I make a clone of the Boot camp partition?

My MacBook Air (10.6.8) is having problems and I need to send it away for repairs. Before I do that I want to make a clone of everything and put it on my new MacBook Pro (10.7.2)
I am making a clone of the Mac partition using Carbon Copy Cloner. That has worked well as a backup for me.
The only problem is I need to make a clone of the Boot camp partition (Windows partition) and I don't know how.
I want to make an exact clone so it has all the operating system, files and everything.
The other question is when should I make a Bootcamp partition?
Should I migrate the clone to the new mac using Migration Assistant, and then make a boot camp partition? And then what are the exact steps putting the clone onto the boot camp partition?
Thanks for any help.

Here are some previous coments made on this forun regarding backup of a Boot Camp partition. I use Paragon HDMSuite 2011.
Casper 6 does seem to work;
WinClone was handy for XP users but doesn't for instance check for errors during the backup only during restore. Winclone was discontinued at 2.2, all 2.3 versions are hacks (removal of the OS check seems to be the main thing) There has been no deveoplment or support for a while now.
Acronis 2011 w/ plus pak, didn't work well previously
Ghost 15 - probably not
Casper 6 works for Windows on Boot Camp only
CopyCatX is more lengthy and sector copy so takes the longest.
Paragon Hard Drive Suite 2011 because it works great
and they have CampTune
Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
Since this is you first time backing up your partition, I would suggest using one of the Backup Wizards. They'll guide you through the backup process and keep you from doing something wrong Similarly, use the Restore Wizard to restore your partition/drive.
HDMS 2011- back up a dual-boot Mac to an external USB drive, do:
1) Boot from the Recovery Disk (I'm assuming that the backup hard drive is attached before you reboot)
2) Select Paragon Hard Disk Manager
3) Launch the Backup Wizard by selecting Wizards > Backup Wizard
4) Select the Mac hard disk (not the partition) where it asks "what to backup"
5) On the Backup Destination page, select "Save data to any local drive or a network share"
6) Hit the radio button for the "Save to local drive option" (unless you got a boatload of DVD's )
7) Select the external USB drive as the backup destination
8) Look over and correct the name and comments
9) Hit Next to start the backup
When it's done, you have an entire copy of your Mac's HD saved to external media.
If you need to recover your HD, just run the Recovery Wizard and reverse the process.

I tried installing Windows 7 using Boot Camp, but it didn't work, I don't know how to "unparticion" the memory I gave to Boot Camp, and Boot Camp "vanished", help...

I tried installing Windows 7 using Boot Camp, but it didn't work.
Although it didn't work, the memory is still divided. So I looked for Boot Camp in aplications, but it literally vanished...
So I tried downloading it again, but I only found EXE files... they don't work on my MacBook Pro...
It's very new... Bought it recently...
Please... I need help to unparticion memory back to original Mac HD and install Boot Camp...
Thanks...

Below is the paragraph from the instructions. Follow it exactly and then report what happens at each stage.
How you remove Windows from your computer depends on whether you installed
Windows on a second disk partition or on a single-volume disk.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as
described below, remove Windows by deleting the Windows partition and restoring
the disk to a single-partition Mac OS X volume.
If your computer has multiple disks and you installed Windows on a disk that has only one
partition: Start up in Mac OS X and use Disk Utility, in the Utilities folder, to reformat it
as a Mac OS X volume.
To delete Windows and the Windows partition:
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Remove Windows 7,” and then click Continue.
5 Do one of the following:
a If your computer has a single internal disk, click Restore.
b If your computer has multiple internal disks, select the disk with Windows on it,
and then select “Restore to a single Mac OS partition” and click Continue.

Installing Win 8.1 over Win 7 in Boot Camp

I recently replaced my 2008 MBP with a MBP(retina). I had been running Win 7 Pro on the older machine and thought that it might be OK to install 8.1 on the new machine using Boot Camp. As with most installs that I've been reading, it didn't go very well. I received the following message:
" Windows could not update the computer's boot configuration. Installation cannot proceed".
I searched the many discussions surrounding this error message and it appears not to be an isolated thing. There have been many well thought out fixes however most have been at the sacrifice of EFI, which is clearly an advantage to have working when using Boot Camp. I tried the several "fixes" that didn't require a great deal of tinkering within the OS, including downloading the latest ISO from MS, but still the installation failed just as it was about to complete.
Getting fed up with this I installed Windows 7 Pro without a hitch.

I got an mid 2011 imac and installed windows 7 pro ultimate 64bit on it
and upgraded it digitally to windows8 and then upgraded it from windows marketpalce to windows8.1 works great

How do I partition my hard drive for boot camp?

Model Name:          MacBook Pro
Model Identifier:          MacBookPro1,2
Processor Name:          Intel Core Duo
Processor Speed:          2.16 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          2 GB
Bus Speed:          667 MHz
Boot ROM Version:          MBP12.0061.B03
SMC Version (system):          1.5f10
Serial Number (system):
Hardware UUID:          00000000-0000-1000-8000-0016CB982183
Sudden Motion Sensor:
State:          Enabled
Okay so this is my machine. I want to run Boot Camp and to install Windows XP onto the machine as I need to use certain windows programmes for my business as well as the Mac stuff.
I have no idea how to partition some of my free 26gb space to create a drive to install windows onto?
Can any help please?

dpx wrote:
If you do really want to partition your hard drive then you need to look in your utilities folder for disk utility.
Once this is open, click on your hard drive image in the left hand column and then you will see a partition tab. Here you can split your HD into two partitions. Call one of them XP or something like that so that you know where to install windows.
It's quite safe and you can always go back to one big partition if things do not work out.
Remember though to backup first...
To the OP
Do not heed this advice, you should use Boot Camp Assistant to create the partition for Boot Camp, do not use Disk Utility.

How do I install Windows 8 Pro using Boot Camp?

I was given Windows 8 Pro as a gift and I am curious as to how I can work around installing Windows 8 without having to purchase a System Builder. I don't want to have both System Build and Pro :/
Thanks in advance.

Welcome to Apple Support Communities
It's illegal to install this version if you haven't got Windows 7, Vista or XP installed, so if you want to use the upgrade version you have purchased, first you have to install Windows 7 in Boot Camp.
Then, after installing Windows 7, check that your Mac supports Windows 8 > http://support.apple.com/kb/HT5634 After that, download and install the Boot Camp 5 support software, and finally, insert the Windows 8 disc and follow the steps

Running win 7 on boot camp

I am trying to set up Windows 7 on my brand new Mac book pro. 15 inch retina screen. I7 processor.
Apple support says the version of Boot Camp on my brand new machine only supports, Win 8.
I don't want to have to buy another version of Windows, but it appears I may have no choice.
Does anyone know another work-around? What about parallels?
If forced to do so,
Can I buy and download Windows on line? Or must I have a physical copy on CD Rom?
Thanks so much.
Mike Duffy
<Email Edited By Host>

You can use Parallels which does not rely on Boot Camp. Or you can try to find the previous version of Boot Camp Assistant that does support Win 7.
You will have to go to the Microsoft site in order to see what is available for purchase online. I think they only sell you an updater for Win 8 online for download. But you must buy the DVD for a full installer. Not sure, so you will need to check it out.
For future reference do not reveal your email address on the forums.

How to capture snapshot in Win XP in boot camp

Similar Messages

Maybe you are looking for