How to capture switch config from Hyperterminal

Hi!!! I tried to capture configuration reports of a switch which i did from Hyperterminal.I went to the menu bar which in the top and went to transfer ,on the dropdown it says capture text.I did that but when i opened the captured file i can see the text scattered here and there.Is is possible to see the captured configurations of the switch as how we see organised in the hyperterminal.Can u pls tell me ,do i need to do any configurations in the hyperterminal before i could start capture text.
thanks and regards

hi
try opening the file either with wordpad or notepad.
sometimes it works fine with wordpad not though with notepad..
regds

Similar Messages

  • How to capture an image from my usb camera and display on my front panel

    How to capture an image from my usb camera and display on my front panel

    Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
    Christian

  • How can i switch account from U.S. store in Romania store?

    How can i switch account from U.S. store in Romania store?

    see here
    http://support.apple.com/kb/HT1311

  • How to tranport XI config from DEV to QAS or PRD

    Dear Sir,
    We would like to know How to tranport XI config from DEV to QAS or PRD
    Thank you and best regards,
    Vimol

    Hi,
    Check some links on transporting Objects.
    Transporting IR,ID Objects using File System
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
    How to handle SLD for Tranporting Dev to Quality ser
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    Transporting XI from DEV to QA
    Transporting XI from DEV to QA
    using CMS system. in XI
    1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
    5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content  .htm --> Configuring Groups and Transport Targets
    Look into this blog for how to export / improt IR and ID objects,
    /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
    http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
    /people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
    http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
    http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Re: Moving project from Dev to QA
    Error while exporting/transporting the Business system from Dev to Quality
    Transporting the scenario frm Dev Server to PRD Server
    transporting data from Dev to quality  using CMS
    Regards,
    Phani
    Reward points if Helpful

  • How do I switch plugins from CS5 to CS6?

    How do i switch plugins from CS5 to CS6?

    Welcome to the forum Steven,
    Do you have specific ones you wish to migrate?
    I think with CS6 I believe the underlying architecture for plugins was changed, so you may wish to check with the makers to see if they have CS6 compatible update versions available.
    I think some had to be re-written under the new framework to be compatible under CS6.

  • HT1535 my sister gave me her old ipad2, how do I switch it from her library to mine?

    my sister gave me her old ipad2, how do I switch it from her library to mine?

    Reset the iPad and set it up as new, then sync it with your computer.
    Settings->General->Reset->Erase all Content and Settings

  • How to capture graphical outputs from other programs

    Does anyone know how we capture the graphical outputs from the other programs and show them
    on the swing?
    I'd like to use a java program to run gnuplot, capture the outputs, and show them using swing.

    Depends on what you mean by "graphic outputs".
    Taking a quick glance at the gnuplot homepage, it looks as if you can output to PNG files, so just run the app, and load the png file.

  • How do i switch library from one apple id to another

    How do I switch my Ipod library from on apple ID to another Apple ID number.   I have two email address and my main Ipod library is under one email apple id #.

    Hi if you have songs you bought on itunes it should go through but not all the time so I know a trick because I had songs that got deleted by mistake I bought from itunes but this lets you get all music content out
    here's how it goe's
    1st pulg your ipod in then go tostart menu click on my computer or just computer depending on what your model calls it
    2nd Once in my comp click on your ipod drive go to tools or view under options click on file or floder then look for
    the show all hidden files section make sure because this is very important click on the option ok it or apply it
    3rd then a new file or floder will apear click on it then look for the music section the folders will have codes like a letter and number click on one of them because this is a block of some of the music then you will see the songs  you will have alot of these files so highlight them all it & drag them into the my music floder by you have to do it folder by folder to highlight all the songs they are broken off into differnt sections!! so each coded folder with music must be opened & then the music highlighted then draged into my music shouln;t take too long it took me like an hour total
    Btw Itunes should have my music set as it's defualt so make sure then after that you can add music same way highlight all the songs in each coded section then click open hope I helped
    Nick The Nerd

  • How to load a config from one appliance and publish it to both

    Hi,
    We're using  AsyncOS7.5 on two WebAppliances S360 with a
    Configuration Master 7.5 (M160).
    I used one of both appliances to implement URL Filtering and now I'd like to transfer
    this coniguration to the the master in order to publish it to both appliances.
    As I could see it doesn't appear to be possible to load the config from one
    specific appliance.
    How can I do that the best?
    Any hints?
    Thanks
    Jannis

    Jannis,
    You can import the config file from the WSA which URL filtering has been configured to the M160 in Configuration Master 7.5. This will wipe out the current configuration master 7.5 stored in the M160, and you can then publish the same config to the other WSA.
    Check the online help for section "Initializing and Importing Configuration Masters"
    Hope this helps.
    - donny

  • How to capture selected value from drop down by index

    Dear friends,
    i want to capture the value of select value from drop down by index, for eg if  select air france, how to capture , could any one please let me know
    Thanks
    Vijaya

    Hi Vijaya,
    You can get the value of selected from drop down as below
    Check out the event handler method attached to Onselect event of the ui element drop down by index , if no event is associated, then create an event and attach to the drop down list
    Now you will be having the CONTEXT_ELEMENT in the WDEVENT parameter
                   data lo_element type ref to if_wd_context_element.
                   lo_element = wdevent->get_context_element( name = 'CONTEXT_ELEMENT').
    Now, you can get the static attribute value of selected  drop down value & let us say your drop down list values are populated from context node 'ND_DRP_DOWN'
                   data ls_data type wd_this->element_nd_drp_down.
                             lo_element->get_static_attributes(
                                       importing
                                       static_attributes = ls_data ).
    Hope this helps you.
    Regards,
    Rama

  • How to capture values dynamically from output screen

    Hi all,
    I have a new requirement.
    i developed a report which is showing output correctly. Here i have to take a check box for every record in output screen. if i check some of the check boxs then it should allow for further processing.
    i succeeded upto put checkboxes on output screen.
    but i don't know how to capture the values of checkboxes of every record into an internal table. it is necessary to capture into an internal table
    will it be work by using LOOP AT SCREEN statement.
    could you please explain with examples. it is normal report program only.
    i would appreciate an early reply
    Regards
    Prabhakar

    Sample code for usage:
    Internal table for Region and its Description
      data: begin of t_t005u occurs 0,
             LAND1 like t005u-land1,
             BLAND like t005u-bland,
             Bezei like t005u-bezei,
            end of t_t005u.
    Ranges for Country
      ranges: r_land1 for t005u-land1.
    Get the country codes and their descriptions
        refresh r_land1.
        clear r_land1.
      refresh t_dynpfields.
      move 'V_LAND1' to t_dynpfields-fieldname.
      append t_dynpfields.
      clear t_dynpfields.
    Read the value in the Country field on the screen
      call function 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = 'SAPLZ_VENDOR_MASTER'
          dynumb               = '0004'
          translate_to_upper   = 'X'
        TABLES
          dynpfields           = t_dynpfields
        EXCEPTIONS
          invalid_abapworkarea = 01
          invalid_dynprofield  = 02
          invalid_dynproname   = 03
          invalid_dynpronummer = 04
          invalid_request      = 05
          no_fielddescription  = 06
          undefind_error       = 07.
      read table t_dynpfields with key fieldname = 'V_LAND1'.
      if not t_dynpfields-FIELDVALUE is initial.
        r_land1-low = t_dynpfields-FIELDVALUE.
        r_land1-sign = 'I'.
        r_land1-option = 'EQ'.
        append r_land1.
        clear r_land1.
      endif.
    Get the Regions to be displayed as F4 Help
      select land1
             bland
             bezei
        from t005u
        into table t_t005u
       where spras = 'EN'
         and land1 in r_land1.
      if not t_t005u[] is initial..
    Popup to display Valid Regions for the selected country
        CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
          EXPORTING
            ENDPOS_COL   = 60
            ENDPOS_ROW   = 40
            STARTPOS_COL = 40
            STARTPOS_ROW = 20
            TITLETEXT    = 'Region'
          IMPORTING
            CHOISE       = v_choice
          TABLES
            VALUETAB     = t_t005u
          EXCEPTIONS
            BREAK_OFF    = 1
            OTHERS       = 2.
        if sy-subrc = 0.
          if v_activity = 'V'.
            read table t_t005u index v_choice.
            if sy-subrc = 0.
              v_regio = t_t005u-bland.
              move 'V_BEZEI' to t_dynpfields-fieldname.
              move t_t005u-bezei to t_dynpfields-fieldvalue.
              append t_dynpfields.
    Update the Region description on the screen.
              call function 'DYNP_VALUES_UPDATE'
                EXPORTING
                  dyname               = 'SAPLZ_VENDOR_MASTER'
                  dynumb               = '0004'
                TABLES
                  dynpfields           = t_dynpfields
                EXCEPTIONS
                  invalid_abapworkarea = 01
                  invalid_dynprofield  = 02
                  invalid_dynproname   = 03
                  invalid_dynpronummer = 04
                  invalid_request      = 05
                  no_fielddescription  = 06
                  undefind_error       = 07.
            endif.
          endif.
        endif.
      endif.

  • How to push the config from WCS to WLC

    Hi Everyone
    sorry a total noob here. I had to reset factory my WLC. how can I download the config from WCS? Cisco Prime? I have the config backed up there but I cant see an option to push the config
    thanks alot

    If the device is already in the Prime Infrastructure, you can open it in Device work center and select the device > use the configuration archive option > scheduled deploy.
    Also, the Prime Infrastructure Plug and Play feature allows you to perform an initial provisioning of a software image and configuration on a new device. For more details check :
    Automating Device Deployment Using Plug and Play Profiles
    Working with Device Configurations
    -Thanks
    Vinod

  • How to capture an image from a clip

    Hi,
    Is there a way to capture an image from a movie clip using iMovie 06?
    I would like to save some frames from the vedio footage as photos.
    Any help will be greatly appreciated. Thank you.
    New Mac User
      Mac OS X (10.4.5)  

    Hi iMac User:
    Yes-you can save a single frame from iMovie by selecting the File-->Save Frame As option. From there it will ask you where and in what format you want to save it.
    Just be aware that the quality won't be perfect because it is taken from a video clip.
    Sue

  • How to capture the data from a JSP form

    Hi
    I have a JSP form, My task is to capture the data from a JSP and submit to Data Base. for example I have the field like
    Enter Table name to be created in data base: The table name is to be captured by a servlet and by that table name, table should be created in the data base.
    Edited by: Reddy_Prasad on ?? ?????, ???? ?:?? ???????
    Edited by: Reddy_Prasad on ?? ?????, ???? ?:?? ???????

    Get the entered value from the jsp into servlet using request.getParameter("enteredTableName"). it will return the String,pass this table name to execute query using JDBC connection and statement objects.
    -cheers Ram

  • How to capture error message from standard function module

    Dear friends
    when i  execute standard function module in finance , i am getting error message , pls check the below screen shot,
    how to capture the below error message so that i have display in my webdynpro component
    Thanks
    Vijaya

    Hello Vijaya,
    Incase of BAPI's they have a return table parameter T_RETURN. Just read that return table to get the error message.
    Incase of normal function modules, there will be exceptions raised for the message used inside the function module. Just read the sy-subrc after the FM and based on the sy-subrc value find the respective exception raised.
    May be you can try like this, whenever the message is raised it will be stored in the system variable.
    CALL FM.
    check for the system variables.
    sy-msgid = Message ID of the latest message raised.
    sy-msgno = message number of the latest message raised.
    sy-msgty = message type of the latest message raised.
    sy-msgv1 = variable1 of the latest message raised.
    sy-msgv2 = variable2 of the latest message raised.
    sy-msgv3 = variable3 of the latest message raised.
    sy-msgv4 = variable4 of the latest message raised.
    Regards,
    TP

Maybe you are looking for