How to capture the screen and send it to attachment for that mail

hi sir ,
     how to capture the screen shot and attach with that e-mail , whether it is possible or not ..
Regards,
kumar

hi sir,
    i am asking about while creating the support message from help menu in sap..
while creating the support message we have to give component , priority and text also .. after that click the send icon in that support desk message .. while clicking the send button the entire screen ( what  we have entered in that creen na ) i have to capture the screen ( it may be save in local file also )  after that it will attach into attachment and then send it to ...
Regards,
kumar

Similar Messages

  • How to capture the screen for sending the mail

    dear sir,
                      How to capture the screen for sending the mail .. Is there any funtion module or anyother way ? .. How to do this .. Please tell me..
    Regards,
    Kumar

    dear sir,
    s thats my problem ?
    Regards,
    kumar

  • When I open an email, my computer won't go to the link listed, or when I am doing research the same thing, then I see a ALLOW in the upper right hand corner of the screen and I have to click on that. What happened and how do I fix this?

    Somehow my settings have changed. When I open an email and there is a link, my computer won't allow it, also when I am doing a search, my computer won't allow certain links to open.
    What I see is "ALLOW" in the upper right hand corner of the screen, and I have to click on that in order to continue my email or do a search. How did this suddenly happen and how do I change it back to being able to roam the Internet without having to click on ALLOW all the time?
    Also, I set up Google as my home page, but it won't list Email or any other options. I have to type in Google in the Google box, then Email appears. How do I get the right Google set up as my home page so I can access Email without jumping through hoops.
    Thanking you so much for your time and consideration.
    Sincerely,
    [email protected]

    Sign out of the iTunes Store. Sign in again.
    tt2

  • How to capture the date and time of  a background job

    Hi experts,
    How to capture the date and time of  a background job?
    How to find whether it is runned succesfully or not?
    If it is not successful how to put error message?
    ASAP
    Thanx in advance,
    Sudha

    To Display the STATUS of the JOB which is exectued in background
      CLEAR : wa_jobsteplist.
      REFRESH : i_jobsteplist.
      WRITE:/ 'DISPLAYING JOB STATUS'.
      CALL FUNCTION 'BP_JOB_READ'
        EXPORTING
          job_read_jobcount           = w_jobcount
          job_read_jobname            = w_jobname
          job_read_opcode             = '20'
        JOB_STEP_NUMBER             =
       IMPORTING
         job_read_jobhead            = wa_jobhead
       TABLES
         job_read_steplist           = i_jobsteplist
    CHANGING
       RET                         =
       EXCEPTIONS
         invalid_opcode              = 1
         job_doesnt_exist            = 2
         job_doesnt_have_steps       = 3
         OTHERS                      = 4
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    To Display the status text as per the status type
      CASE wa_jobhead-status.
        WHEN 'S'. WRITE: / 'Scheduled'.
        WHEN 'R'. WRITE: / 'Released'.
        WHEN 'F'. WRITE: / 'Completed'.
        WHEN 'A'. WRITE: / 'Cancelled'.
        WHEN OTHERS.
      ENDCASE.

  • How to capture the screen of the remote computer

    sir
    i need help for my project how to capture the screen of the remote
    system plaese give idea for doing the project

    Run a daemon on the remote computer which uses java.awt.Robot.

  • A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

    A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
    Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
    But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
    I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
    How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
    Thank you in advance,
    SiHero

    If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
    If Verizon return it to Apple it wil not be handled by Apple
    If Verizon also use unauthorised repairers you may be lucky
    (Apple do not sell parts to local guys or anyone else )

  • I am using iPhone 5 and tried to Erase All Contents and Settings but it is just showing an apple sign on the screen and nothing is happening now for about 3 days now. All it does is eat up my battery and still show apple sign after charging! Help!!!!

    I am using iPhone 5 and tried to Erase All Contents and Settings but it is just showing an apple sign on the screen and nothing is happening now for about 3 days now. All it does is eat up my battery and still show apple sign after charging! Help!!!!

    Hi DaVince Vince,
    I'm sorry to hear that you are having issues with your iPhone. I also apologize, I'm a bit unclear what issues you were having that led up to the attempted Erase All, and/or exactly what behavior you are seeing now (restarting, not responding at all, etc). If you are seeing an Apple Logo screen and your iPhone does not appear to be starting correctly, you may find the following articles helpful:
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Regards,
    - Brenden

  • No matter what I do, I cannot figure out how to refresh the screen, and so I can't even see what's new on my own website!

    I cannot refresh the screen, no matter what I try. The "restore" is not the same thing. So I always get old versions of websites, including my own. I cannot see a new version of any website I have visited previously. I need to know how to REFRESH my screen, and there is no way to do it!!!!!

    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

  • How ACE classifies the traffic and send it to appropriate Context

    Hi ,
    Could some one please explain packet clasification in ACE modulue  ,example : let us assume thee are three contexts ( context1 , context 2, context3) in ACE module , how the ACE  classifies the traffic and send to appropriate CONTEXT  if any customer comes and hit the ACE .
    Regards
    Raj

    Hello Raj,
    In addition to what Ajay mentioned, yes each virtual address ( VIP) in combination with the port which you configured( if any) will act as unique identifier for the ACE to handle a specific traffic and finally take the load balance decision it needs or any other action which would be required
    Another thing which you can take into consideration from the routing perspective is that you configure on the Admin Context the specific vlans allocated to each contexts based on your requirements so for example: you may allocate this vlan10 for context 1 then vlan 20 for context 2 or all of the vlans for context 3
    Going back to your original, yes the ACE works this:
    Request ----->VIP--->ACE checks which contexts has the VIP in question---->send request to context--->traffic is load balanced between the servers
    Jorge

  • How to capture the screen in AS3

    When I click on a button I want to capture the entire screen
    and make it available in the background of the new frame I
    display.How to do this?

    You can use BitmapData.draw(objectGoesHere) method to capture
    any display object as Bitmap.

  • How to improve the screen and audio quality on my Satellite c655-s5132

    I recently bought a used Satellite C655-S5132 laptop.  Although this machine is designed to run on Windows 7, it came equipped with Windows XP.  The machine runs OK except for the screen which shows a distorted image and the sound which is tinny and low volume. 
    I suspect this is due to a software shortcoming rather than a defect in any of the hardware.  The image distortion may be due to the fact that this laptop comes with a wide screen with an aspect ratio of 6:9, whereas the Windows XP operating system that is currently installed on this laptop is set at an aspect ratio of 4:3 and doesn't allow me to switch to the other aspect ratio.
    As a result, the image fills the entire screen but appears to be stretched horizontally.  As for the audio, I checked the volume settings and they are all set at their upper limit. 
    I have done the following:
    1.  I did a system check which shows that there are 2 drivers that need to be updated: video controller and video controller (VGA compatible).  But when I prompt the machine to install updated drivers it gives me a failure code 28 "device not installed properly".
    2. I ran 2 driver software programs: one shows that for both video controllers "the manufacturer is unknown" and "drivers are not installed", and the second shows that the driver is installed but needs to be updated.
    3. Searched the web for the right drivers and found that for this machine running on Windows XP (32 bit), Intel produces a graphic driver, GMA 4500.
    4. I tried to download this driver from the Intel website but the installation process failed. Perhaps it failed because Toshiba has specified a custom version of this graphic driver that can only be downloaded from its own website.
    5. I searched the Toshiba website but was unable to identify the drivers for sound and image for this machine.
    Could anyone help me find the right drivers on the Toshiba website that would allow me to: (i) change the setting for the aspect ratio and in doing so get rid of the image distortion, as well as improve the overal picture quality, and (ii) increase the audio volume and improve the overall sound quality?
    Thank you.

    Satellite C655-S5132
    Downloads here
    My advice is to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
    You can obtain recovery discs from Toshiba. Scroll down to Get Recovery Media here .
    For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 71 of the User's Guide.
       Satellite L640/L650 Series User’s Guide
    -Jerry

  • How to break the file and send it to 2 different formats??

    Hi PI Experts,
        My scenario is i have a file with multiple records on the sender side and i have 1 receiver business system and have to  receive the data in 2 formats, one is in JDBC and other in xml format. my condition is if field is equal to 'ECC' then the data should be send to JDBC and if element is not equal to 'ECC' then data should be send to xml format.
    for example, if a file has 2 records('ECC & ECC1) then 'ECC' record has to be stored in JDBC and 'ECC1' record should be send to xml format.
    tell me what to do in the mapping side. hope u guys understood my problem.
    if possible send me screenshots of the mapping.

    HI Srini,
    Just use two different message types in ur mapping!!!
    Write the condition if (A = ECC ){Map to Structure A}
                                  else if (A = ECC1){Map to Structure B}
    Once you are generating all the required ECCs in Message Type A and then All ECC1s in Message Type B,
    It is just configuration stuff where you will have common sender Agreement, receiver determination and also interface determination but the only thing that will separate these two is your receiver agreement.
    You have to use two service interfaces for this, one for Structure A and another for Structure B.
    I have done similar stuff  2 yrs back!!!
    Please let me know if you require anything on this.
    Thanks & Regards,
    VK

  • How to change the date and time during OVM installation for Fusion Apps

    Hi,
    The customer is using Fusion Instance which is a V1 (Build 19) OVM installation shipped by Oracle with Demo Data (including seeded user IDs and roles) in it.
    Now they have issue with Date format for the application on the screens is showing MM/DD/YYYY where as it should be (Singapore) Standard is DD/MM/YYYY.
    Q/A: How to change the date/time in OVM image
    Refer SR : 3-5640792461
    Regards
    Ganesh Ananthapadmanaban

    Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
    networksetup -help
    systemsetup -help
    That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
    Cheers.

  • How to use the mirrored and log shipped secondary database for update or insert operations

    Hi,
    I am doing a DR Test where I need to test the mirrored and log shipped secondary database but without stopping the mirroring or log shipping procedures. Is there a way to get the data out of mirrored and log shipped database to another database for update
    or insert operations?
    Database snapshot can be used only for mirrored database but updates cannot be done. Also the secondary database of log shipping cannot used for database snapshot. Any ideas of how this can be implemented?
    Thanks,
    Preetha

    Hmm in this case I think you need Merge Replication otherwise it breaks down the purpose of DR...again in that case.. 
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • How to capture the LOCK and UNLOCK status of an Internal Order

    Hi,
    I am trying to upload the data for transaction KO02. The order can be in LOCK status or UNLOCK status. Could you please let me know how can we determine whether an order is locked or unlocked. Is this data stored in some table. Help is very much appreciated.
    Thanks in advance,
    Suresh.

    Hi,
    i assume it's in table JEST
    so select:
      SELECT        * FROM  JEST
               WHERE  OBJNR  =  aufk-OBJNR
                AND   STAT   IN S_STATI
    Andreas

Maybe you are looking for

  • Need to convert to vector format.

    I have a document with pictures.  I need to convert it to vector format before sending to printer.  Not sure how to do it.  Using CS5.  Is converting to outlines the same? 

  • (Vendor) Master records with individual payment

    Hi for company code AD12 for all vendors we are using the individual payment because we dont´t have payment advices. And without them the vendors are unable to allocate our payment to open invoices. But the problem is: We post an invoice and a credit

  • IPad video has no sound

    why when I am accessing the site www.sportlemon.tv (www.trombar.com) the video has no sound?

  • Ace http response code seeing 500, but server returning 200

    we have an http probe configure like below,the real is failing probe, and the ace says it's returning a 500 response code,however when i browse to  the server from my laptop, i get a 200, and the correct regex ( going to http://172.19.254.51/operatio

  • Performance issue with the table use vrkpa

    Hi. here is the selection criteria that i am using and the table use vrkpa i only used to map the table kna1 and vbrk.vbrk and kna1 doesnot have the direct primary key relationship. please check and let me know wht this vrkpa is taking time and how c