How to careate Fault Policies.xml file in J Developer.

Hi Friends,
I want to handle Mediator Exceptions for that i need to create fault policies.xml file and i am new for mediator..can you Explain How to create fault policies.xml in Jdeveloper ...May i know what's the steps to folllow.. and i refered http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/med_faulthandling.htm#BABBGIDE
this link also but i didn't get from that..?

There is no UI support to create fault-policies.xml. One has to create it manually based on the schema defined in the doc(the link you posted). You can see the sample file here - http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/med_faulthandling.htm#CHDFAEEF.
-Sandeep

Similar Messages

  • Facing issue while handling faults using fault-policies.xml

    Hi All,
    Scenario: One Asynchronous Bpel is trying invoke the webservice. When the status of the webservice is "Down", the BPEL will throw "System fault : remoteFault"
    This fault will be handled by the fault-policies.xml.
    CustomFaultHandler.java : basically it will print data to audit-trail and send data to the JMS Queue.
    I am facing some issues , when i am trying to handle faults using fault-policies.xml.
    Issue1: Display warning message at time of deployment : Warning: Schema validation failed for fault-policies.xmlXML-24506: (Error) Identity constraint validation error: 'Key sequence not found in key reference'
    Issue2: CustomFaultHandler.java is able to print data to audit-trail but unable to send data to the Queue. and why the policy file getting executed at time of "Start of Invocation" and then it's showing "Invocation faulted" ?
    Audit-Trail Message:
    *===========*
    Started invocation of operation "process" on partner "RemoteService".Started invocation of operation "process" on partner "RemoteService".
    [Fault Recovery] Invoked handleBPELFault on custom java action class "com.CustomFaultHandler".
    Invoke1
    190002190002
    default/TestjavaAction!5.0*soa_fcb2a5dd-06a7-47f9-bb88-cab14d343856/TestBPEL
    190002
    Faulted while invoking operation "process" on provider "RemoteService". Faulted while invoking operation "process" on provider "RemoteService".
    fault-policies.xml:
    *==========*
    <?xml version="1.0" encoding="UTF-8"?>
    <faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
    <faultPolicy version="2.0.1" id="ErrorHandlingModelr"
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xs="http://www.w3.org/2001/XMLSchema"
    xmlns="http://schemas.oracle.com/bpel/faultpolicy"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Conditions>
    <faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
    name="bpelx:remoteFault">
    <condition>
    <action ref="ora-java"/>
    </condition>
    </faultName>
    </Conditions>
    <Actions>
    <Action id="ora-java">
    <javaAction className="com.CustomFaultHandler"
    defaultAction="ora-terminate">
    <returnValue value="Manual" ref="ora-abort"/>
    </javaAction>
    </Action>
    <Action id="ora-abort">
    <abort/>
    </Action>
    </Actions>
    </faultPolicy>
    </faultPolicies>
    fault-bindings.xml:
    *===========*
    <?xml version="1.0" encoding="windows-1252" ?>
    <faultPolicyBindings version="2.0.1"
    xmlns="http://schemas.oracle.com/bpel/faultpolicy"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <component faultPolicy="ErrorHandlingModelr">
    <name>TestBPEL</name>
    </component>
    </faultPolicyBindings>
    Warning Message when trying to deploy the composite to the server :
    =============================================
    Warning: Schema validation failed for fault-policies.xmlXML-24506: (Error) Identity constraint validation error: 'Key sequence not found in key reference'
    Error Message from server:
    *==============*
    Message handle error.
    error while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the reported exception is: Fault not handled.
    failure to handle a fault thrown from a scope, by any blocks in the scope chain.
    This exception occurred because the fault thrown in the BPEL flow was not handled by any fault handlers and reached the top-level scope.
    A top-level fault handler should be added to the flow to handle faults not caught from within the flow.
    This error contained an exception thrown by the message handler.
    Check the exception trace in the log (with logging level set to debug mode).
    ORABPEL-05002
    Message handle error.
    error while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the reported exception is: Fault not handled.
    failure to handle a fault thrown from a scope, by any blocks in the scope chain.
    This exception occurred because the fault thrown in the BPEL flow was not handled by any fault handlers and reached the top-level scope.
    A top-level fault handler should be added to the flow to handle faults not caught from within the flow.
    This error contained an exception thrown by the message handler.
    Check the exception trace in the log (with logging level set to debug mode).
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:205)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:88)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:64)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    at com.collaxa.cube.engine.dispatch.Dispatcher$ContextCapturingThreadFactory$2.run(Dispatcher.java:850)
    at java.lang.Thread.run(Thread.java:662)
    Please help..
    Thanks in Advance
    Edited by: Sharmistha Ghosh on May 16, 2012 12:37 PM

    My SOA suite version is 11.1.1.7 and i was getting the same warning  while compiling the Composite in JDeveloper. To fix it update your fault-policy.xml
    Change it to
    <faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
        <faultPolicy version="0.0.1"
                     id="BPELProcessV1_Faults"
                     xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
                     xmlns:xs="http://www.w3.org/2001/XMLSchema"
                     xmlns="http://schemas.oracle.com/bpel/faultpolicy"
                     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    And it will solve the issue.

  • How to retrieve value from xml file

    hi all,
    can somebody pls tell me how to retrieve value from xml file using SAXParser.
    I want to retrieve value of only one tag and have to perform some validation with that value.
    it's urgent .
    pls help me out
    thnx in adv.
    ritu

    hi shanu,
    the pbm is solved, now i m able to access XXX no. in action class & i m able to validate it. The only thing which i want to know is it ok to declare static ArrayList as i have done in this code. i mean will it affect the performance or functionality of the system.
    pls have a look at the following code snippet.
    public class XMLValidator {
    static ArrayList strXXX = new ArrayList();
    public void validate(){
    factory.setValidating(true);
    parser = factory.newSAXParser();
    //all factory code is here only
    parser.parse(xmlURI, new XMLErrorHandler());     
    public void setXXX(String pstrXXX){          
    strUpn.add(pstrXXX);
    public ArrayList getXXX(){
    return strXXX;
    class XMLErrorHandler extends DefaultHandler {
    String tagName = "";
    String tagValue = "";
    String applicationRefNo = "";
    String XXXValue ="";
    String XXXNo = "";          
    XMLValidator objXmlValidator = new XMLValidator();
    public void startElement(String uri, String name, String qName, Attributes atts) {
    tagName = qName;
    public void characters(char ch[], int start, int length) {
    if ("Reference".equals(tagName)) {
    tagValue = new String(ch, start, length).trim();
    if (tagValue.length() > 0) {
    RefNo = new String(ch, start, length);
    if ("XXX".equals(tagName)) {
    XXXValue = new String(ch, start, length).trim();
    if (XXXValue.length() > 0) {
    XXXNo = new String(ch, start, length);
    public void endElement(String uri, String localName, String qName) throws SAXException {                    
    if(qName.equalsIgnoreCase("XXX")) {     
    objXmlValidator.setXXX(XXXNo);
    thnx & Regards,
    ritu

  • How I can create a XML file from java Aplication

    How I can create a XML file from java Aplication
    whith have a the following structure
    <users>
    <user>
    <login>anyName</login>     
    <password>xxxx</password>
    </user>
    </users>
    the password label must be encripted
    accept any suggestion

    Let us assume you have all the data from the jsp form in an java bean object..
    Now you want a xml file. This can be acheived in 2 ways
    1. Write it into a file using java.io classes. Say you have a class with name
    write("<name>"+obj.getName+</name>);
    bingo you have a flat file with the xml
    2. Use data binding to do the trick
    will recommend JiBx and Castor for the 2nd option
    Regards,
    Rajagopal

  • How to Read and Generate XML file from java code.

    hi guys,
    how to read the xml file (Condition :we know only DTD or Shema only).
    How to Generate the new xml file ?(using Shema )
    And one more how directly Generate the xml from DB?
    Pleas with code or any URL

    Using XMLbeans you can generate Java objects from an XSD schema (perhaps DTDs aswell)
    Then you can create an instance of the Document object and ask it to write itself.
    This will create an XML document complient to the schema.
    XMLBeans generates a "type" safe DOM where you can only ever have a structure compilent to you schema.
    matfud

  • How I could generate an XML file from a report in version 4.0B

    Good morning,
    How could I generate an XML file from a report? Please note that I am using version 4.0B
    I don't have access to
    Billy Vital

    Hi,
            In the Class CL_XML_DOCUMENT,
                 we have a method  EXPORT_TO_FILE to download an XML file.

  • How To check validity of XML File

    can any one tell me how to find whether an XML file is valid or not before beginning to parse the XML file
    Thanks in advance

    Xerces will do that for qou, if you activate validation (and, of course, a DTD is specified in the file). Read the documentation of Xerces at xml.apache.org

  • How to remove Unicode from XML file

    I get following error when unmarshal xml:
    [java] org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x15) was found in the element content of the document.
    Anyone know how to remove Unicode from xml file? Can I remove the unicode by rebuild the file?
    Thanks

    These sort of error usually occur when you're using a different character encoding to read the file than the one you wrote it with. Perhaps if you were to post the problem section of the file and/or the code that created it in the first place.

  • How to parse contents from XML file in Java

    Hi All,
    I have a scenario like this . I have one xml file with key value pairs of ( name , URL ) . I have retrieved contents from XML file , now I want to parse these contents and store in a bean object.
    How to parse Contents of XML file??
    Thanks in advance,
    Rajendra.

    Hi All,
    I have a scenario like this . I have one xml file with key value pairs of ( name , URL ) . I have retrieved contents from XML file , now I want to parse these contents and store in a bean object.
    How to parse Contents of XML file??
    Thanks in advance,
    Rajendra.

  • How do I create individual xml files from the parsed data output of a xml file?

    I have written a program (DOM Parser) that parses data from a XMl File. I would like to create an individual file with the corresponding name for each set of data parsed from the xml document. If the parsed output is Single, Double, Triple, I would like to create an individual xml file (Single.xml, Double.xml, Triple.xml)with those corresponding names. How do I create the xml files and give each file the name of my parsed data output? Thanks in advance for your help.
    import java.io.IOException;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.parsers.ParserConfigurationException;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    import org.w3c.dom.Node;
    import org.w3c.dom.NodeList;
    import org.xml.sax.SAXException;
    public class MyDomParser {
      public static void main(String[] args) {
      DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
      try {
      DocumentBuilder builder = factory.newDocumentBuilder();
      Document doc = builder.parse("ENtemplate.xml");
      doc.normalize();
      NodeList rootNodes = doc.getElementsByTagName("templates");
      Node rootNode = rootNodes.item(0);
      Element rootElement = (Element) rootNode;
      NodeList templateList = rootElement.getElementsByTagName("template");
      for(int i=0; i < templateList.getLength(); i++) {
      Node theTemplate = templateList.item(i);
      Element templateElement = (Element) theTemplate;
      System.out.println("Template" + ": " +templateElement.getAttribute("name")+ ".xml");
      } catch (ParserConfigurationException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();
      } catch (SAXException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();
      } catch (IOException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();

    Ive posted the new code but now I'm getting a FileAlreadyExistException error. How do I handle this exception error correctly in my code?
    import java.io.IOException;
    import java.nio.file.FileAlreadyExistsException;
    import java.nio.file.Files;
    import java.nio.file.Paths;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.parsers.ParserConfigurationException;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    import org.w3c.dom.Node;
    import org.w3c.dom.NodeList;
    import org.xml.sax.SAXException;
    public class MyDomParser {
      public static void main(String[] args) {
      DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
      try {
      DocumentBuilder builder = factory.newDocumentBuilder();
      Document doc = builder.parse("ENtemplate.xml");
      doc.normalize();
      NodeList rootNodes = doc.getElementsByTagName("templates");
      Node rootNode = rootNodes.item(0);
      Element rootElement = (Element) rootNode;
      NodeList templateList = rootElement.getElementsByTagName("template");
      for(int i=0; i < templateList.getLength(); i++) {
      Node theTemplate = templateList.item(i);
      Element templateElement = (Element) theTemplate;
      System.out.println(templateElement.getAttribute("name")+ ".xml");
      for(int i=0; i < templateList.getLength(); i++) {
      Node theTemplate = templateList.item(i);
      Element templateElement = (Element) theTemplate;
      String fileName = templateElement.getAttribute("name") + ".xml";
      Files.createFile(Paths.get(fileName));
      System.out.println("File" + ":" + fileName + ".xml created");
      } catch (ParserConfigurationException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();
      } catch (SAXException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();
      } catch (IOException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();

  • How to config the web.xml file, when I use Richfaces + RI 1.2?

    Hi there:
    I want to use Richfaces + RI 1.2 to build a project. I don`t know how to config the web.xml file.
    By the way, my web server is Tomcat 6.0, my JDK's version is 6u6. I don`t want to use the facelets.
    thanks.
    lxm

    just add this before *</web-app>*
    <context-param>
           <param-name>org.richfaces.SKIN</param-name>
           <param-value>blueSky</param-value>
      </context-param>
      <filter>
           <display-name>RichFaces Filter</display-name>
           <filter-name>richfaces</filter-name>
           <filter-class>org.ajax4jsf.Filter</filter-class>
      </filter>
      <filter-mapping>
           <filter-name>richfaces</filter-name>
           <servlet-name>Faces Servlet</servlet-name>
           <dispatcher>REQUEST</dispatcher>
           <dispatcher>FORWARD</dispatcher>
           <dispatcher>INCLUDE</dispatcher>
      </filter-mapping>

  • How to extract data from XML file with JavaScript

    HI All
    I am new to this group.
    Can anybody help me regarding XML.
    I want to know How to extract data from XML file with JavaScript.
    And also how to use API for XML
    regards
    Nagaraju

    This is a Java forum.
    JavaScript is something entirely different than Java, even though the names are similar.
    Try another website with forums about JavaScript.
    For example here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3

  • How can (parse) i use XML file with missing EndTag

    hi,
    i have an application which writes an "XML file".
    another application should read that XML file, build an DOM and
    access the nodes with xpath.
    my problem. if the first application is not finished there are tags
    missing. e.g. </xml>. but the seconds application cannot wait until the first application finishes it task.
    if i now read the XML file the parser cannot load it because the end tags are missing.
    my question:
    how can i deactivate the check or how can i read the XML file and access it via XPath (my application is using at the moment XPath to access the nodes and i dont want to change that)
    as parser i am using XERCES
    alex

    As far as I know, you can't do this - xml must be well formed (this is sort of a bedrock of xml). There may be some work around's, but I'm not aware of any - and they would most likely be hacks.

  • How do I upload an XML file to salesforce using BULK API?

    Hi There,
    Please let me know how do we upload an XML file to salesforce using Bulk API?
    Thanks,
    ET

    Hi,
    I think that this is a more SalesForce.com question and think you will have more chance looking at SOAP API Developer's Guide for salesforce. Sending a SOAP request from the API Server is very straight forward and there are several tutorials and well documented about this.
    Cheers,
    Stefan

  • How can I pass a xml file to the webservice?

    Hello friends,
    How can I pass the XML file to any webservice API ?
    I have all the inputs of API in to the XML file.
    Please note:- I don't intend to do any .NET or Java coding to populate the data in the objects .Instead I plan to input the data to the webservice direcly from the XML file required schema.
    If necessary I can use Oracle Bpel process manager for it.
    Thanks and regards
    Ram Krishna Tripathi
    [email protected]

    Well, I've used it (or rather: tried it); did not/could not find the many options to export at a nearly lossless conversion for HD footage (hence my disclaimer "don't know"). Here is a screenshot of the Handbrake options:
    And here are the choices and settings from MPEG Streamclip:
    Maybe not empirical, but enough for me to have an opinion.

Maybe you are looking for