How to carry forward budget next year for single wbs element

Hi,
i want to carry forward budget next year for single wbs element.
pl suggest me.
Thanks & Regards
Purna.M

Hi,
Go to CJCO click on Dynamic Selection and in master data of WBS element select No of person responsible and give the person responsible and execute.before that maintain no of person responsible in that specific WBS element.
hope it will solve ur problem.
Regards
Avinash

Similar Messages

How to carry forward RE prior year for each period?

Hi,
I have a Retained Earning (RE) prior year. How do i carry forward the opening balance for each period?
I have tried to use the copy method (using the same version but copy from period 1 to 2) however encountered message stating that " Posting in identical currencies: Amount disagree".
Please advise.
Regards, Renee

Renee,
What has remained unclear
how SEM BCS handled balance carried forward?
Re: BCS Calculation for retained earnings

Materials for Single wbs Element from project/Plant stock

Hi to all,
I would like to have the following scenarios for the single Project.
1) Some Activities in the single WBS Element will be using the Materials for specific to the Project. So MRP will be generated for the Project and PR,PO,Goods receipt will be done.
2) In the same WBS Element of some activity, wants to consume materials from the Plant stock. For this we donu2019t want to run MRP. From the reservation no, we want to take the materials for project use.
I have a single Network profile and I donu2019t want to create anymore.
Understand from movement type 411, we can take the materials from unrestricted Plant stock to project. Is there any other way/any config I need to check in account assignment category to fulfill the requirement to consume from Plant stock and also to use Project stock in a single profile.
Regards
N.Raju

Hi,
that is the only option, Std. SAP does not support for unrestricted plant stock ( for Project MRP or availability check).
same option-
1) transfer free stock( plant stock) to respective WBSE
2) Run MRP
3) Consume material.
Venkatesh

Absence Quota Carried Forward to Next Year

Hi All
hope you are doing well. I was looping around for carry forward remaining absence quota from one year to next year
Requirement:
Absence Quota for 20 days generated from 01.01.2012 to 31,12.2012, deducted 4 days on december 2012
but absence quota to next year i.e from 01.01.2013 to 31.12.2013 is showing as 20 wherein actual should be 16
Followed Woods documents at Carry Forward Absence Quota but failed
Configuration of Time Types, PCR and Schemas as folows, request your kind attention at earliest as its business critical
Configured a constant at T511k
Created two time types
For Quota
For carry forward
PCR as follows
Schema
Request your kind attention on the same, helpful/ right answers will be rewarded with points
BR
Anil
Message was edited by: Sikindar A

Hi Anil,
I just had a quick look at the PCRs and I think some things are wrong.
First of all ZCMO controls if it's the last day of last month or not. If it is the schema will go through ZCFL.
ZCFL reads the remain part of quota type 20. Please make sure you quota type is correct. I mean it's 20. I assume quota type is correct. PCR checks if remain of quota is equal or great than 20 then it put 20 into time type 0904.
Until here you will have remain part of quota at last day of last month in time type 0904.
Now you need a PCR to control if the date is first day of first month (01.01) reads value of 0904 and through a quota generation rule of V_T559L generate quota.
I don't understand what ZCFT is for!
Regards,
Omid

Balance Leaves to be carried forward to next year

HI Experts,
I am using Time evualation with -ve time , i want to carry fwd all the balance leaves left for the year to the next year.
I have set the "Permit Quota Generation in Time Evaluation" node to "Increase". However i am not able to meet the requirement. Please let me know if i have to maintain any other table or should i have to write PCR for this
Regards
Kanna

You have to write Pcr's for reading the balances and to carry forward the Leaves to quotas.
PCR for Reading Balances.
hrs= Bcurmo
    hrs?(specify the month on which it has to read the balance)
    =
       hrs=Bcurdy
       hrs?(Last day on/after which it has to read the balance)
       =
       OUTAQTYP
        XX (XX:Mention Absence Type)
        hrs=FR C
        addMBXXXX(Time type 4-digit)z
_PCR for Carry forwarding the Leaves.
hrs= Bcurmo
    hrs?(specify the month on which it has to get the balance)
    =
       hrs=Bcurdy
       hrs?(Starting day to get the balance)
       =
       hrs=Mxxxx(Time type which we maintained in above PCR
       updtqAxx(Absence which it has to carry forward)
Where
A-Syntax
B-Syntax
curmo-Current Month
curdy-Current Day
F-Syntax
R-Remaining
C -Syntax
MB-Monthly Balance
z-Replacing Value.
Check and revert with your Comments
Experts:Correct me if am wrong.
Regadrs,
Rao

Error in Asset Value carry forward to next year

As a regular periodic process of Month/Year closing activities in SAP, Asset Year 2015 was opened and then closes the year 2014 and carried forward the Asset values to the year 2015. But unfortunately some of the Asset value had not been transferred to the year 2015. As a result, Depreciation had not been charged for those Asset for the year 2015. Need to transfer the Asset value to the current year immediately. Can any one help me regarding the problem ? The APC Start value is showing in the year 2014 but its not showing in 2015.
The Closing value of Current APC of year 2014 does not match with the Opening value of the APC Start, so what should be the possible reasons for that ?

Hi Erika,
I did that on last January 2015. First i use the T-code: AJRW for the Fiscal Year Change and then T-code: AJAB - for Year end-closing Asset Accounting as i did that for last 4 years. Though there was as error message indicating error in depreciation calculation, our consultant assured me that that will not create any problem. The Error was like below:
600981 0 Secretariat Table 2014 Error in dep. calculation

Retained Earnings Account balance not carry forwarded to next year

Hi,
We have problem in Retained Earnings Account Balance C/F to next year
example:
G/L Account closing balance in 2008 - 1000.00 (as per FS10N) after c/f balances to 2009
G/L Account Opening balance in 2009 - 850 (as per FS10N) (there is a difference 150.00)
If we double click on Cumulative balace of 850 it will give us - 1000.00 and if we see in report : FBL3N it will show correct balance. Only FS10N is not showing correct balance.
Can you please let us know what will be the reason ?
Thanks
Ravi

Hi Ravi,
We are using 4.6C version and last few years there was no problem and we have other company codes which are showing correct balance. But only one company code this difference is coming.
If we double click the FS10N report opening balace it will give us the correct balance. But in display there is showing less amount.
Thanks

How to carry forward the payment budget to next fiscal year

How to carry forward the payment budget to next fiscal year. Please provide us the Tcode for indivisual and for mass activity also.
Thanks,
Vivek Gupta

Done

How to carry forward remaining Earned leaves to the next year.

HI Experts,
How to carry forward remaining Earned leaves to the next year.
Do I need to write a PCR for that? If yes then which PCR to modify?
Or is there any other way around.
Regards,
Tomesh

Most of the time you will find easier to create a rule for that.
Which one to use: it all depend of your schema! you can also create a specific small rule for it.
The proper day, you can store the remaining balance in a time type (or the day before if your "old" quota is closed) and and store it either in the existing time type that generate entitlement, or in a new one and you create a specific entitlement rule in v_T559E for this time type, valid only once a year

How to carry forward leaves to the next year with out writing PCR

Hi All,
Could you please tell me the process steps for quota carry forward from previous year to the next year with out writing a PCR
Regards
Sita

Hi
Leave balance carry forward

Budget balance carry forward to new year fiscal year

Hi,
Currently, our setting for Funds Management Master
Data is year-dependant. Now, our user request for a budget carry
forward from one year to another year. So, we are trying to the fix the
configuration.
My question is, can we do the budget balance carry forward if the master data is year-dependant. If can, how to do that?
For your information, our system is SAP R3 version 4.7C and using the BCS.
Appreciate your advise on this matter.
Thanks and regards

Hi,
copy cost center planning:
kp97 - copy plan to plan
kp98 - copy actual to plan
Internal order copying
ko14 - copy plan to plan
ko15- copy actual to plan
all the best
prasad

Carry forward to next fiscal year G/L balances shopwing Difference

Dear Sapgurus,
I am trying to carry forward the gl balances for 2009 to 2010 in the tcode f.16 i got differences and then i used the tcode faglgvtr for ECC. 6.0. Still i am getting balance differences in the fiscal year 2010.
Please anyone Provide me how can i clear/correct the gl balances.
regards,
Tirupati

Dear Ravi,
Thanks for your replay.
Actually now we are in 2012 fiscal year. the documents are posted in 2010 fiscal year 13th period. It is not suggestible to do carry farrowed from 2010 to 2011 fiscal year because of the reports were already submitted.
We have done testing in quality system that reversed the posted documents by giving the same dates and later we did the f.16 to carry farrowed from 2010 to 2011. Then the balance was became "0" at 2011 fiscal year beginning. But it is not suggestible in production.
Could you please suggest any alternative solution or any correction program.
Regards,
Mr. Rao

HOW TO CARRY FORWARD RG1 CLOSING BALANCE TO OPENING BALANCE FOR NEW FISCAL

Hi Experts
How to carry forward the RG1 closing stock at the year end to opening balance of Rg1 for new year.
Wt are the steps required for closing activity of RG1 and carry forward closing balance of last year to opening balance of new year.
Thanks

Hi Rohan,
For RG1 and RG23 A Part I and RG23 C Part I
Go to SE16, here enter Table Name - J_2IRG1BAL and Click on "Create" button in initial screen, it will give the maintenance screen. Here mainatin following;
For each of these materials, you have maintained the material form in table J_2IRG1BAL as below. Do not make any entries in fields that are not listed below:
EXGRP - Materialu2019s excise group
DATUM - Date from which RG1 report is required, normally the date of going live
MATNR - Material
FORM - Enter P (Packed) or L (Loose). Do not leave this field blank.
WERKS - Leave this field blank.
OP FN UOM, OP BN UOM, CB FN UOM - Leave these fields blank. All quantities in this table are updated in the base unit of measure of the material
USNAM - User ID of the person filling out the table.
CPUDT - Date of entry
CPUTM - Time of entry
Note: - This is to be done before J1I5, J2I5.
Also refer link;
Update of Registers RG 1 and RG 23 (Part I)
For RG23 A Part II, RG23 C Part II and PLA
Go to SE16, here enter Table Name - J_2IACCBAL and Click on "Create" button in initial screen, it will give the maintenance screen. And maintain following;
Excise Group
Data element for Register names
Date
Plant
Basic duty (OP BAL)
Basic duty (CL BAL)
Basic duty (EXAMT)
Extract Indicator
User name
Entry Date
Entered at
Note: -
1. Enter OP BAL, CL BAL and EXAMT all as same as opening balance. For e.g. opening balance for RG23ABED is 1400 then this value is to be entered in all the 3 fields.
2. You have to enter separate line items for all the accounts;
RG23ABED
RG23ASED
RG23AAED
RG23CBED
RG23CSED
RG23CAED
PLABED
PLASED
PLAAED
PLACESS
RG23AECS
RG23CECS
PLAECS
RG23AAT1
RG23CAT1
PLAAT1
3. Enter Date is one day before of the opening. For e.g. if opening date is 01.04.2008 then enter it in 31.03.2008
Then go for J2I5 - Extract and J2I6 - Print Utility
use following
http://help.sap.com/bp_bblibrary/470/Documentation/J33_BPP_32_CHEM_EN_IN.doc
http://help.sap.com/saphelp_erp60_sp/helpdata/en/18/8e113999724854e10000000a11405a/content.htm
Reefer this link for complete Excise transactions
http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
Re: Excise -initial upload
Hopefully this will helpfull to resolve your answer.
Thanks & regards,
Pankaj Mahajan

Reverse of Carry forward Budget ( CJCO )

Dear All,
I have an urgent requirement.
User has carry forwarded the budget (CJCO) in next fiscal year, and now they want to reverse it.
Can anyone tell me the process of it.?
And one more thing, if anyone can tell me, how system calculates carry forward budget?
Thanking you in advance.
Regards,
M P

I don't believe there is a Reverse Function for this
You can however run CJCO again and again and it will correct the Budget carried forward for example if additional actual costs have been posted in the old year since the last run.
See OSS note 1048588 for calculation of Budget Carry Forward
Hope this helps
Steve

Wrongly carried forward budget (KOCO) want to return.

Hi,
I have by mistake carry forward the budget for a internal order to wrong year, like; a order created in 2008 and i wanted to carry forward the budget to 2009 but done to 2010.
We need to have the budget corrected to the value. I have tried with entering several transactions like budget adjustment KO22, KO24 and KO26, but the budget is still not correct. Currently the internal order is closed, but the budget needs to be corrected for it to be able to get used in the future properly.
Please suggest if I can correct the budget which is wrongly carried forward to wrong year?
Regards,

Any Input?

How to carry forward budget next year for single wbs element

Similar Messages

Maybe you are looking for