How to carry forward leaves to the next year with out writing PCR

Hi All,
Could you please tell me the process steps for quota carry forward from previous year to the next year with out writing a PCR
Regards
Sita

Hi
Leave balance carry forward

Similar Messages

  • How to carry forward remaining Earned leaves to the next year.

    HI Experts,
    How to carry forward remaining Earned leaves to the next year.
    Do I need to write a PCR for that? If yes then which PCR to modify?
    Or is there any other way around.
    Regards,
    Tomesh

    Most of the time you will find easier to create a rule for that.
    Which one to use: it all depend of your schema! you can also create a specific small rule for it.
    The proper day, you can store the remaining balance in a time type (or the day before if your "old" quota is closed)  and and store it either in the existing time type that generate entitlement, or in a new one and you create a specific entitlement rule in v_T559E for this time type, valid only once a year

  • How do I get calendar to forward birthdays to the next year?

    How do I get calendar to forward birthdays to the next year without having to type them all in again?

    Either set a repeating date on the event (repeat every 1 year) or set the birthday field in your contacts on iOS & OS X, then enable the birthday calendar in the  settings. I have no idea how to do this on Windows, so you will need to provide more info about what you are using if you are really on Windows.
    We'll get this moved somewhere more appropriate if you say what device & OS you are using.

  • How to focus and select to the next cell with a ListView when scrolling?

    I have a ListView filled with cells and I'd like to scroll to the next cell to have it focused and selected.
    My code works to scroll down but the scroll bar is going to far!
    How can I reduce the scroll size to each cell, so I can see the focused cell? Is there a better way to implements this?
    Here is my code:
    documentListView.scrollTo(0);
    documentListView.getSelectionModel().select(0);
    int indexSize = documentListView.getItems().size();
    for (Node node : documentListView.lookupAll(".scroll-bar")) {
      if (node instanceof ScrollBar) {
      final ScrollBar bar = (ScrollBar) node;
      bar.valueProperty().addListener(new ChangeListener<Number>() {
      @Override
      public void changed(ObservableValue<? extends Number> value, Number oldValue, Number newValue) {
      int selectedIndex = documentListView.getSelectionModel().getSelectedIndex();
      if(selectedIndex <= indexSize && listScrollDown(oldValue.floatValue(), newValue.floatValue())) {
         selectedIndex++;
         documentListView.scrollTo(selectedIndex);
         documentListView.getFocusModel().focus(selectedIndex);
         documentListView.getSelectionModel().select(selectedIndex);
    Thanks for your help,
    Regards

    You could set the IsHitTestVisible property of the WebControl to false but then you won be able to interact with the web page:
    <awe:WebControl ... IsHitTestVisible="False"/>
    Another better option would be to handle the PreviewMouseLeftButtonDown of the WebControl, find the ListBoxItem in the visual tree and then set its IsSelected property like this:
    <ListView x:Name="BrowserListview" ItemsSource="{Binding browserCollection}">
    <ListView.ItemTemplate>
    <DataTemplate>
    <VirtualizingStackPanel Orientation="Horizontal">
    <awe:WebControl Source="{Binding mySource}" PreviewMouseLeftButtonDown="wc_MouseLeftButtonDown"/>
    <Rectangle/>
    </VirtualizingStackPanel>
    </DataTemplate>
    </ListView.ItemTemplate>
    </ListView>
    private void wc_MouseLeftButtonDown(object sender, MouseButtonEventArgs e) {
    ListViewItem lbi = FindParent<ListViewItem>(sender as DependencyObject);
    BrowserListview.UnselectAll();
    lbi.IsSelected = true;
    private static T FindParent<T>(DependencyObject dependencyObject) where T : DependencyObject {
    var parent = VisualTreeHelper.GetParent(dependencyObject);
    if (parent == null) return null;
    var parentT = parent as T;
    return parentT ?? FindParent<T>(parent);
    Hope that helps.
    Please remember to close your threads by marking helpful posts as answer.

  • Carry forward of Asset  to next year

    HI,
    I have one querry ,
    Suppose in 2008, one asset having gross value=100
    Accumilated Depreciation at 31.03.2009=100
    Net Value =0
    In Next year , system does not show this in asset report , so our gross asset decreasing by this much.
    In my concept ,
    in next year asset must carry on with gross value and acc. dep and net asset should be zero..
    Please clear my querry
    Thanks in Advance ,
    Dharmveer

    Hi,
    first complete AJRW and then perform AJAB.
    Now run any AA standard report with report date, which should be in new FY.
    then it will show the both Gross APC value and Accum dep in it.
    Thanks,
    Srinu

  • How to carry forward the leave

    Hai!!
    How can i carryforward the leave.
    Can anybody Tell me.
    I wrote one pcr for that like this.
    Varstcurmo-12
    varstreday-31
    Adddb6655
    updtqa10.
    Thanx

    hi
    My First PCR for getting remained quota is working fine the 2nd pCR for updating carry forward quota in the current year i mean jan 1st quota is not getting updated ,
         VARSTCURMO Current period
           01
             VARSTREDAY Rel. day of period
               01
                 HRS=LL456  Set
                 ADDDB*     Add to day balance
                 UPDTQA60   Abs. Quota Accrual
    this is my pcr
    in Quota function in input i can see value in time type but in oput put the quota is not updated
    can some please check on this

  • How to carry forward the payment budget to next fiscal year

    How to carry forward the payment budget to next fiscal year. Please provide us the Tcode for indivisual and for mass activity also.
    Thanks,
    Vivek Gupta

    Done

  • How to Carry Forward Beginning Balances for CTA

    Hi Experts,
    We're doing a multi-currency AppSet wherein I need to carry forward the ending balances of the cumulative translation adjustment to it's beginning balance the next year but the problem is:
    1. CTA resides only in USD reporting currency(not in LC).
    2. My carry forward rules applies only to local currency. I've tried to include USD but when I run the default formula wherein I've included my currency conversion rule, the beginning balance for CTA zero out. I've tried removing the ratetype on CTA, replace it with blank, AS_IS,NOTRANS so as not to translate that account since it will be converting from a blank opening balace in LC(since CTA is only calculated in USD) to USD so it's reasonable that it would zero out, but still it's trnaslated.
    Any idea how to work this out?
    Thanks,
    Marvin

    Hi Marvin,
    Set your CTA account ratetype to something like "HISTX" or whatever you want, add this ratetype to RATE dimension and in your business rule, set this rate type to [AS_IS].
    We use it here and it works.
    Thanks,
    Regis

  • Carry Forward Leave

    Need PCR to carry forward my leave quota to next year
    one PCR to transfer at end of the year for remaining quota to timetypes
    second PCR to transfer timetypes last year renemg quota to back

    1)  order to carry forward the leave quota to the next year, set the "Permit Quota Generation with Time Evaluation" node to either "Increase" (where it adds to the next year quota) or "Replace" (where it replaces the next year quota) as per your requirements.
    2)  VARSTCURMO ( 01 JAN NEXT YEAR)
      VARSTREDAY ( 01 ON 1ST JAN NEXT YEAR)
      ADDDBL2222( WHERE IS YOUR time Type where you stored the Previous year     Balance and
      UPDTQA*0 ( YOu quota Type )
    inputs gven by pragana hari and vinod kumar

  • HOW TO CARRY FORWARD RG1 CLOSING BALANCE TO OPENING BALANCE FOR NEW FISCAL

    Hi Experts
    How to carry forward the RG1 closing stock at the year end to opening balance of Rg1 for new year.
    Wt are the steps required for closing activity of RG1 and carry forward closing balance of last year to opening balance of  new year.
    Thanks

    Hi Rohan,
    For RG1 and RG23 A Part I and RG23 C Part I
    Go to SE16, here enter Table Name - J_2IRG1BAL and Click on "Create" button in initial screen, it will give the maintenance screen. Here mainatin following;
    For each of these materials, you have maintained the material form in table J_2IRG1BAL as below. Do not make any entries in fields that are not listed below:
    EXGRP - Materialu2019s excise group
    DATUM - Date from which RG1 report is required, normally the date of going live
    MATNR - Material
    FORM - Enter P (Packed) or L (Loose). Do not leave this field blank.
    WERKS - Leave this field blank.
    OP FN UOM, OP BN UOM, CB FN UOM - Leave these fields blank. All quantities in this table are updated in the base unit of measure of the material
    USNAM - User ID of the person filling out the table.
    CPUDT - Date of entry
    CPUTM - Time of entry
    Note: - This is to be done before J1I5, J2I5.
    Also refer link;
    Update of Registers RG 1 and RG 23 (Part I)
    For RG23 A Part II, RG23 C Part II and PLA
    Go to SE16, here enter Table Name - J_2IACCBAL and Click on "Create" button in initial screen, it will give the maintenance screen. And maintain following;
    Excise Group
    Data element for Register names
    Date
    Plant
    Basic duty (OP BAL)
    Basic duty (CL BAL)
    Basic duty (EXAMT)
    Extract Indicator
    User name
    Entry Date
    Entered at
    Note: -
    1. Enter OP BAL, CL BAL and EXAMT all as same as opening balance. For e.g. opening balance for RG23ABED is 1400 then this value is to be entered in all the 3 fields.
    2. You have to enter separate line items for all the accounts;
    RG23ABED
    RG23ASED
    RG23AAED
    RG23CBED
    RG23CSED
    RG23CAED
    PLABED
    PLASED
    PLAAED
    PLACESS
    RG23AECS
    RG23CECS
    PLAECS
    RG23AAT1
    RG23CAT1
    PLAAT1
    3. Enter Date is one day before of the opening. For e.g. if opening date is 01.04.2008 then enter it in 31.03.2008
    Then go for J2I5 - Extract and J2I6 - Print Utility
    use following
    http://help.sap.com/bp_bblibrary/470/Documentation/J33_BPP_32_CHEM_EN_IN.doc
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/18/8e113999724854e10000000a11405a/content.htm
    Reefer this link for complete Excise transactions
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
    Re: Excise -initial upload
    Hopefully this will helpfull to resolve your answer.
    Thanks & regards,
    Pankaj Mahajan

  • HT1918 I would like to change the data of my credit card. For the next year I live in Germany, I have a geman visa card, but I want the itunes and everything to be in english language. How can I do this?

    I would like to change the data of my credit card. For the next year I live in Germany, I have a german visa card, but I want the itunes and everything to be in english language. How can I do this?

    You cannot.

  • HT4400 how do you advance to the next page with focus 40 blue

    how do you advance to the next page with focus 40 blue

    Hello,
    To place your own images for previous and next button you need to use the fill feature. Please check the steps below:
    1. Go SlideShow options and Uncheck Edit Together.
    2. Select the next button and click on Fill to open Fill panel.
    3. Click On Add Image and select the image you want to use. Also select the fitting type as "Scale to Fill" or "scale to Fit "and Position as "Center".
    4. Do the same for previous button.
    Regards
    Vivek

  • Doubt about changes in the routing for the next year

    Hello All,
    I have a question hope for you guys to gave a brief and technical answer to me.
    I have some doubts, one doubts is in the actual routing, can I change the Valid to ( Date) in the routings in the operation. (Example. original valid to date is 31.12.9999 i want to change this with 31.12.2007). Because we want to create new routing with changes for the next year. But it´s necessary the new routing is valid from  01.01.2008 and valid to 31.12.2008.
    And I can´t 2 routings with the same valid  for 01.01.2008
    I have many routings for change and I have other option like change the status (create or release).
    Other doubt, the user has a excel file with the changes necessary, how can I upload from excel file to SAP R/3. It exist one program, one procedure u other option.
    Your kind response is what am ex[ecting expert. Thanks,

    Hi
    pl use the ECM functionality (engineering change functionality) for the same..its standard SAP and no need for any special config..
    You can channge the same routings by giving the effectivity date in ECR (eng change request)
    for creating an ECR pl follow the below steps
    =Create Engineering change request - TCODE - CC31
    =Click on object type after entering this screen parameters
    =Click on status management
    =and change status by clicking on “Check request”
    =Select the required objects types to be changed and click on objects to reach the below screen
    =Enter the required objects to be changed via selecting appropriate tab.
    =Select the object and click on details
    =Click on status management
    =Go to Header and  click  on status
    =Change the status by clicking upto convert request.
    =Click on the save button and Engineering Change Request has been created..
    IMP Notes -
    Do close and Release the Engineering change request after doing the appropriate changes at both “Object level and Header Level “
    Pl come back for any further clarifications..
    rewards will be appriciated if found useful
    BR
    Sumit

  • How to post depreciation start date in next year?

    I have a problem in fix asset period control.
    We want to post the depreciation start date in the next two month after GR. I set the period control rule as:
    Fiscal Year Variant: K4, period control: Z1 (next 2 month), month: 12, day: 31, period: 13
    But no matter I set the period as 12, 13, 14, the depreciation start date always be 2012/1/1 (if the GR date is in December)
    How can I make the depreciation start date in the next year?

    Hi,
    Please try with period control 08  - At the end of the year (=Start date of following year).
    Regards
    SM

  • I will studying in the UK for the next year and want to know if an unlocked iPhone 4S with a new sim card purchased in the UK will work as opposed to getting a new phone?

    I will studying in the UK for the next year and want to know if an unlocked iPhone 4S with a new sim card purchased in the UK will work as opposed to getting a new phone?  There seem to be differeing opinions on this.

    Iphone 4s only has one version so it should work world wide in any carrier..As long as it's and unlocked version ofcourse.

Maybe you are looking for