How to Carry out Bulk SMS services on your website

Hello friends
Please I would like to introduce bulk sms services on my site I designed it with Fireworks and exported to Dreamweaver, then uploaded. But recently I have decided to make it more dynamic/blog with it by installing Wordpress and would not mind discarding the static aspects of it.
With this, how can I introduce bulk sms services into this site?
Thank you in anticipation

Let me google that for you
Nancy O.

Similar Messages

How to Carry out New Pricing in Sales Order userexit

Hello,
In userexit save_document_prepare of program MV45AFZZ, I'm adding an entry in XKOMV for a header pricing condition ZD01. After saving, if I go back into the order and go directly into the line item conditions, the ZD01 does not exists at the item level. If I navigate the the header conditions and then go back to the items, ZD01 appears as it should. I believe what is happening is that the header condition is not being distributed to the line items unless New Pricing is carried out. If I manually enter the ZD01 condiiton instead of relying on the userexit code, everything works fine. The header condition is properly distributed to the line items. Therefore, I believe the configuration is correct. My question is, "How can I programatically trigger New Pricing from a sales order userexit". Is this possible in SAVE_DOCUMENT_PREPARE or do I need to do it somewhere else.".
Thank you,

this problem has been resolved. The problem was that I was appending the header condition to XKOMV instead of inserting the header condition as the first line in the table. SAP will carry out the new pricing if the header condition is on the first line.

How to carry out / trigger defined substitution

Hello,
Can you tell me why I can not carry out the substitution, which is defined as following:
Tcode: OPSN
Applicatn area PS Project System
Callup point 1120 Network activity
Prerequisite: AFVGD-STEUS = 'PS01'
So when I change the some user fields of the (internal) activity in a project, when I save the project, the substition is not carried out, can you tell me what else I need to implement the trigger of substitution.
Thanks a lot!
Jing

Dear,
For first Query:
1) Create a value assignment type with type u201CAu201D Node with class with all the tick marks for activate indicator a
Path: SPRO>>Environment, Health and Safety >> Basic Data and Tools >> Specification management >> Specification Data Base Structure >> Settings for value Assignment >> Specify value Assignment Types.
Here you will find total value assignment Types available in the system.
Double click on the value assignemnt type, which you would like to change.
In this screen you need to select the value ***. Category as "A". after selecting the category "A" you need to enter the class in the column class(valAss.). Select the last 2 check boxes (New VA Active & Change Active) out of six.
If you want to create a new one go to "new entries" and follow the steps mentioned above.
For second Query:
2) Run Table based value assignment creation make sure the check edit is ticked ok
Once the updations or changes happened in the value assignments, you need to do this activity.
Path: SPRO>>Environment, Health and Safety >> Basic Data and Tools >> Specification management >> Specification Data Base Structure >> Settings for value Assignment >> Set Up Table-Based Value Assignment
Here you will find 2 rows
1. Create Entries for the Value Assignments
2. Set Up Table-Based Value Assignment
You need to select "Create Entries for the Value Assignments" first
double click on this. You will find a execution button. execute it.
system asks "Do you really want to change value assignment type entries?"
click on "Yes".
system updates the information in the value assignment tables, what ever you did the updates in value assignment types.
you will find the message of "number of new entries and number of entries deleted"
Go back...........you will find the activity performed tick mark.
you have to do the same thing in the second line "Set Up Table-Based Value Assignment". Here execution is not required.
Kamal

How to Get More Hits - Clicks - Traffic to Your website

Having trouble getting traffic to your website?
Read this Article
Read this article

Choosing a hosting company is like choosing a car - you really need to drive it first to see if its any good. There's some pointers about this here.....
http://www.iwebforbusiness.com/Tools-Resources/Website-Hosting.html
Keywords are how search engines work. Once you have registered with them and they have crawled and indexed your site, any given page will come up in a search if it is relevant to the keywords entered into the search box by the viewer.
iWeb SEO Tool is the easiest way to add the title and meta tags and meta description but you also need to add these to the page names, title, captions and text in your webpages. You need interesting and relevant text that describes your product or service and descriptive captions of all images and media.
Its important to realize that you need to refresh these tags every time you publish changes to your website and to upload and resubmit a new sitemap when you make major changes and/or add pages.
You can download a Publishing Workflow Checklist here.....
http://www.iwebforbusiness.com/SEO/SEO-Book-Sample-Request.html
Because I have several websites, I use Sitemap Automator to handle creating, uploading, verifying and submitting sitemaps - its a great time saver if you are submitting your sites to Google, Yahoo, Bing and ASK.com....
http://www.iwebforbusiness.com/Tools-Resources/SEO-Tools.html
SEO is an ongoing project. Once your site has been crawled by Google, you will be able to see a list of the keywords that they have found and their relevance in the Dashboard of your Google Account.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

How do you link a ssl certificate to your website created with adobe muse?

I would like to know how you can link a ssl certificate to a website created with Muse especially when you have created an ecormmerce website.

In Business Catalyst as well, SSL certificates cannot be added separately.
However (if you are looking to create payment mode secure), the payment pages in Business Catalyst already uses secure URL for the payment and you do not require a SSL certificate for them.
Hope this helps.
Regards,
Sachin

How to find out which RAC service a user is using.

Hi,
Our RAC database uses clustering services.
How do I find out to which RAC service a database user is setup for?
I know how to check what it is currently using by looking at GV$SESSION. But i want to check what service a user was originally setup?
I cant seem to find the info i need on the following views:
GV$ACTIVE_SERVICES
DBA_SERVICES
GV$SESSION
am i missing out something?
thanks,

There is a service_name column in gv$session that should show what service is being used by a connection.
Sorry...reread and see that you know about gv$session...I'm not really sure what you mean by originally setup or how long ago you are trying to look for but in v$active_session_history there is a column that is service_hash that will join to dba_services column name_hash..so if you can find some old session from that user and get the service_hash you can get the service name from dba_services.
Edited by: DBA_Mike on Mar 24, 2009 6:48 AM

How to carry out entry validation in SM30 with events

Hi people,
I'm creating a Z table with Maintenance view in SM30...i've modified the view so all fields are required as Rich H explained in some other post. But now i need to validate user input for a particular field against a standard table, and force to reenter if data is not valid. I've been looking up the available events...event 05 triggers when the line is new, but not when modifying. I've tried a couple of other events but don't serve my purpose. What i want is to validate data upon user's entered all the required fields (whether the line was preeexistant or not). If data is valid then go on, if not trigger a message and force correction prior continuing (disallowing saving).
Anyone knows how to do this?
Many thanks

I get what you suggest, but unfortunately i've already done that, it's not enough.
Here's the situation: The table has this fields:
KSCHL (PK-FK T685)
LIFNR (PK-FK LFA1)
EBELN (FK EKKO)
EBELP (FK EKPO)
Besides the implicit foreign key validations (i.e. the PO item exists in EKPO), i need to validate that it's not deleted (LOEKZ = 'L') and that the PO vendor is the one entered (i must not enter any PO which vendor isn't the one in that line). Hope I make myself clear.
This code works but in event 05 (new lines). I need to find out an event for the modified lines as well:
FORM f_validate_po.
CHECK NOT ( ztmmiv001rps-lifnr IS INITIAL OR
              ztmmiv001rps-ebeln IS INITIAL OR
              ztmmiv001rps-ebelp IS INITIAL ).
SELECT COUNT(*)
FROM ekko
WHERE ebeln = ztmmiv001rps-ebeln AND
        lifnr = ztmmiv001rps-lifnr AND
        exists ( SELECT *
                 FROM ekpo
                 WHERE ebeln = ztmmiv001rps-ebeln AND
                       ebelp = ztmmiv001rps-ebelp AND
                       loekz <> 'L' ).
IF sy-dbcnt = 0.
    MESSAGE e000.
ENDIF.
ENDFORM.

How to find out if the "Services" page is shown on the phone?

Hello! I have a application that pushes a page(which is actually a picture) to the user's Cisco phone, at certain time, I'll need to remove that page from the screen. To push a "Key:Services" works, but only when the page is currently displayed. If the page is pushed back, or if the page has already been removed (by user select a "Clear" soft button), then pushing "Key:Services" from server will cause strange and inconsistent behavior. Bascially I'll need to know if the "Services" page is shown on the phone screen, probably by visiting the phone's web server somewhere(just don't know where).
I managed to get around a problem like this a while back but not that lucky this time... Any ideas? Thank you very much for your help!

alright, this is the url I had in mind: http:/IP_PHONE_ADDRESS/CGI/ModelInfo
See http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=IP%20Communications%20and%20Video&topic=IP%20Phone%20Services%20for%20Developers&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddb6101 for a discussion.

How to carry out real-time or near real-time alerts?

I just wonder when the source audit data transfer to audit vault server, does it done by Refreshing the Warehouse , or another process? Refreshing the Warehouse seems only normalize the raw audit data into the data warehouse. And can we control the frequency of transfering source audit data from soucre to audit valult server ?

I was traced into transfering audit data from source to audit vault server, and found that it's very quickly to get the new audit data from source db into the audit vault server's table named avsys.av$rads_flat, it's almost realtime, but I have no idea about which process has done this, which process? how to control the frequecy ?
Although the server has gotten the new audit data into the avsys.av$rads_flat, the warehouse still cann't get the new audit data whatever I refreshed the warehouse via Audit Vault Console or using command "avctl refresh_warehouse -wait" until 24 hours later. user579967 seems has the same problem, it really frustrated me. Is there anyone knows how ?

How to carry out license measurement for PLM Content Server

Hi,
Can anyone guide us on how the License measurement will work in case we have deployed the content server on a separte hardware box with AIX and Oracle
thanks

Hi
The database is MaxDB and not oracle as mentioned.
Thanks

How to find out what BOE Service Pack is installed

I'd like to check what SP we had installed on our BOXIR2 Enterprise Server. The version number is 11.5.8.8265, I'd like to know if SP1 or SP2 is installed, or even none of the SP is installed. Thanks.

the information you need can be found via:
The build version of BOXI Enterprise can be found in the Settings area of the CMC. Build version of individual services can be obtained from the CCM.
For client tools (Designer, DekI, etc.), right click on the executable (BusObj.exe, Designer.exe, etc.) and choose Properties > Versions. (For a Windows installation, the executables are installed at the following path: <BO install dir>\win32_x86).
all you answers are there,
Regards,

How to carry out multiple searches on the same engine simultaneously.

As mentioned above. I'm looking for a way to search multiple text at the same time.

Can you give a more detailed example of what you mean?
For example:
* Do you want to type query #1 into the search box or address bar and open it in results tab #1, then type query #2 into the search box or address bar and open it in results tab #2? To do that, hold down the Alt key when pressing Enter or hold down the Ctrl key when clicking the icon that submits your search.
* Do you want to combine numerous queries into a single request to Google and get the results all mixed together? You can use OR (must be in capital letters) with quotation marks or parentheses for grouping. For example: Android OR ios OR "windows phone"
* Something else?

How to carry out an action on a task in a bpm process from another adf app?

Hi everyone,
We have a simple BPM process with only one human task with two actions: approve and reject.
We want to know if it is possible to approve or reject this task from another adf application; I mean by clicking a button on a different page - not using the Actions menu in workspace, can I change the status of the task to approved or rejected and remove the task from the workspace of the assignee?

I think you can use ItemAdding event to update your fields. This works better for you instead of ItemAdded event.
Bala

How to carry out Dynamic Replace action in OSb

Hi all
I want to do a dynamic replace in OSB.
like
Lets my input be :-
<cli:AccountInquiryRequest xmlns:cli="http://client.accountInquiry.dto.cards.nab.cz.fc.ofss.com">
<cli:requestUID>string</cli:requestUID>
<cli:cardType>string</cli:cardType>
<cli:AcctId>5</cli:AcctId>
<cli:scr>AcctId</cli:scr>
<cli:dest>requestUID</cli:dest>
</cli:AccountInquiryRequest>
So what i want to do is check for element name in <scr>(in this case AcctId) and then replace the contains of the <AcctId> with the contains of the element name given in <dest>(in this case its requestUID)
so in this case i want to replace the contain of requestUID with AcctId .
Please help !!!
Thanks

I think you need to determine the xpath used for replace at runtime.. You can try looking at xslt xalan:evaluate function for this.
The function syntax is as :
<xsl:value-of select="xalan:evaluate($XPath)"/>
You need to construct $XPath to point to right xpath . e.g concat("$body/*:",$body/*:dest)
This will make $XPath to = $body/*:requestUID
You can then pass this xpath string to xalan:evaluate.

How to sign out of gamecenter but not your Apple ID?

So I was wondering how would you log out of your gamecenter account and then log back in with another account while at the same time, keeping yourself logged in with the same Apple ID?

Hello ducksn00fer
You should be able to sign out in Settings > Game Center by taping on your Apple ID. After that, just tap Sign In and enter in the account that you want and you will still be signed in to the Apple ID that you use for purchases.
Game Center settings
http://help.apple.com/iphone/8/#/iph6c493cac
Regards,
-Norm G.

How to Carry out Bulk SMS services on your website

Similar Messages

Maybe you are looking for