How to catch exception i defined in the function module
I defined the exception 'no_value_found' in the function module, now, the problem is how to catach it in the program calling it
Hi Atish
I have used sy-subrc to handle it in the program, howerver, it is still encounter runtime error:
Error message -
A RAISE statement in the program "SAPLZERC" raised the exception
condition "NO_OBJECT_INFO_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
No object information found
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Errors is at following position:----
39 ELSE.
>> RAISE NO_OBJECT_INFO_FOUND.
41 ENDIF.
Similar Messages
-
How to delete lock entries generated by the function module "BAPI_OBJCL_CHANGE"
Hi experts,
I'm now trying to make an add-on program
which updates material master information by the background job.
To update the "Classification" view of material master,
the program calls the function module "BAPI_OBJCL_CHANGE".
If the "RETURN" information is valid,
then the program calls "BAPI_TRANSACTION_COMMIT" (with the "wait" parameter 'X').
Contrary to my intention,
lock entries generated by the function module "BAPI_OBJCL_CHANGE" remains after "BAPI_TRANSACTION_COMMIT".
As a result, the material updated remains locked until the add-on processing ends.
To shoot this trouble, I read some SCN discussions below:
<<lock unlock record>>
⇒ As I wrote above, I checked the parameter for "BAPI_TRANSACTION_COMMIT".
<<BAPI_OBJCL_CHANGE Lock Error !>>
⇒ I cannot call the function module "BAPI_OBJCL_CHANGE" with "IN UPDATE TASK" option
because of "BAPI_OBJCL_CHANGE" attributes.
("BAPI_OBJCL_CHANGE" is not a "Update Module".)
How can I delete lock entries generated by the function module "BAPI_OBJCL_CHANGE" ?
Thanks in advance.
TomI quess/hope you want to remove locks in you caller program and not locks required by the update task processing to insure database consistencies...
Did you use the WAIT option in the commit FM, else if there are no other locks in your called program a call of FM DEQUEUE_ALL could solve your problem.
Regards,
Raymond -
How to catch exception thrown from a function module?
Hi all,
When we are calling a function module from JSPDynpage setting some import parameters, If in some case an exception is thrown in the function module. How can we catch the same exception in the JSPDynpage program?
Thanks & Regards,
RaviHi Ravi
Try this
try
Object retMsgs = output.get(bapiretrunmsgobject);
if(result != null )
IrecordSet rmsg = (IrecordSet) result
catch(Exception ex)
printException(ex, "Error getting function result");
Lemme know for any further questions.
Regards
Praveen -
How to catch exception in JSP????
how to catch exception in JSP?
I use JDeveloper 3.1
I use connection with database .
When I insert record in database
when have duplicate of primary key
how to catch this exception and
back to previous page?
I trying with folowing:
<jsp:useBean id="RowEditor" class="oracle.jbo.html.databeans.EditCurrentRecord" scope="request">
<% try {
RowEditor.setUseJS(true);
RowEditor.initialize(pageContext, "package2_Package2Module.Drzavi1View");
RowEditor.setSubmitText("Save");
RowEditor.setTargetUrl("Drzavi1View_SubmitInsertForm.jsp");
RowEditor.createNewRow();
RowEditor.setReleaseApplicationResources(true);
RowEditor.render();
catch(Exception e) {
%>
<script>
alert("primary key duplication");
history.back();
</script>
<% } %>
but i't not working
please help mei catch exceptions as you do, i don't have any problem...
are you throwing the exception from your bean?
actually i don't catch an Exception, but an SQLException...
but it works... here is my code...
try
myclass.addElement(); // this is an insert into Oracle
catch( DataBaseFailException e ) /// an exception that i throws inside after i receive an SQLException
session.setAttribute("gMessage","e.getMessage()); // error code -
How do we trap exception inside the function module?
How do we trap exception inside the function module?
Use ABAP Help - CATCH, RAISE for starters. Or take a look at an existing function module, for example.
-
How to use the Function Module RH_READ_INFTY_1001...
Hi,
Can any one Tell me .. How to do the same functionality .. given below (select).
Using the Function Module RH_READ_INFTY_1001...
*reads CP (Central Person) based on BP (Business Partner)
Select single objid (Object ID)
from hrp1001
into gv_sobid
where subty eq 'B207'
and sclas eq 'BP'
and sobid eq is_header-partner.
*reads P (Person) Based on determined BP (Business Partner)
select single sobid (ID related Object)
from hrp1001
into gv_sobid
where subty eq 'B209'
and otype eq 'CP'
and objid eq gv_sobid.
*determines UserID from IT0105 for determined personell ID
select single usrid
from pa0105
into gv_usrid
where pernr eq gv_sobid
and subty eq '999'.
Reply ASAP....
Answers will be Rewarded...objects-plvar = l_plvar.
objects-otype = 'S '.
objects-sobid = l_positions-objid.
APPEND objects.
CLEAR i1001_itab. REFRESH i1001_itab.
CALL FUNCTION 'RH_READ_INFTY_1001'
EXPORTING
* AUTHORITY = 'DISP'
* WITH_STRU_AUTH = 'X'
istat = '1'
* EXTEND = 'X'
subty = 'A008'
begda = l_keyda
endda = l_keyda
* CONDITION = '00000'
* SORT = 'X'
* WITH_EV = ' '
* ADATA = 'X'
TABLES
i1001 = i1001_itab
objects = objects
EXCEPTIONS
nothing_found = 1
wrong_condition = 2
OTHERS = 3.
IF sy-subrc <> 0.
CLEAR i1001_itab. REFRESH i1001_itab.
CLEAR mngr_nr.
ELSE.
READ TABLE i1001_itab WITH KEY sclas = 'P'.
IF sy-subrc = 0.
mngr_nr = i1001_itab-sobid.
ELSE.
THis is the sample code to use function module using this function module you can get upto HRP1001 selection for userid you need to use same select you write for PA0105 -
How to use the function module ....
hi
how to use the function module ssf_function_module_name in smartformsHi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu -
Regarding how to use the function module *control_form* in scripts
HI friends,
Can any one tell why and where do we use the function module control_form in scripts. Can you give me a small scenario how to use in scripts.hi satish,
by using this function module we can pass the control
commands to FORM THROUGH ABAP/4 PROGRAM.
see the following example:
TABLES: kna1.
DATA: BEGIN OF it_kna1 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1,
ort01 LIKE kna1-ort01,
land1 LIKE kna1-land1,
END OF it_kna1.
DATA:records TYPE i,
window TYPE i value 1.
select-options:s_kunnr for kna1-kunnr.
SELECT kunnr name1 ort01 land1 FROM kna1 INTO TABLE it_kna1
where kunnr in s_kunnr.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'ZSCRIPT4'
language = sy-langu.
LOOP AT it_kna1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ELE1'
function = 'SET'
type = 'BODY'
window = 'MAIN'.
DESCRIBE TABLE it_kna1 LINES records.
IF window lt records.
window = window + 1.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'NEW-WINDOW'
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
thanks,
raji -
How to use the function module /IRM/IPBB_AGREEMENT_CREATE.
Hi all,
Please help me how to use the function module /IRM/IPBB_AGREEMENT_CREATE.
It is a Vistex fuction module which is used to create Sales contract in SAP-Vistex. If anyone has use the function module and do have the sample code please share it.
Thanks.FORM create_agreement TABLES pt_agreement
CHANGING po_agreement .
CONSTANTS: c_strt_knumh TYPE knumh VALUE '0000000000'.
DATA: lc_kona TYPE /irm/s_gkona,
lc_cbasp TYPE /irm/s_ipcbasp,
lt_cbapr TYPE /irm/t_ipcbapr, "Partners
lc_cbapr TYPE /irm/s_ipcbapr,
lt_cbadt TYPE /irm/t_ipcbadt, "Dates
lc_cbadt TYPE /irm/s_ipcbadt,
lt_cbafs TYPE /irm/t_ipcbafs,
lc_cbafs TYPE /irm/s_ipcbafs,
lt_cbacn TYPE /irm/t_ipcbacn,
lc_cbacn TYPE /irm/s_ipcbacn,
lt_cbacl TYPE /irm/t_ipcbacl,
lc_cbacl TYPE /irm/s_ipcbacl,
lt_cbtpv TYPE /irm/t_ipagtpv,
lc_cbtpv TYPE /irm/s_ipagtpv,
lt_texts TYPE text_lh,
lc_texts TYPE itclh,
lt_cbasd TYPE /irm/t_ipcbasd,
lc_cbasd TYPE /irm/s_ipcbasd,
lc_agreement TYPE /irm/s_ipcbasp_doc,
lc_e_log_number TYPE balognr,
lt_messages TYPE /irm/t_gprolog.
DATA: lt_vake TYPE cond_vakevb_t,
lc_vake TYPE LINE OF cond_vakevb_t,
lt_konh TYPE /irm/t_gkonh,
lc_konh TYPE LINE OF /irm/t_gkonh,
lt_konp TYPE /irm/t_gkonp,
lc_konp TYPE LINE OF /irm/t_gkonp,
lt_konw TYPE /irm/t_gkonwu,
lc_konw TYPE LINE OF /irm/t_gkonwu,
lt_konm TYPE /irm/t_gkonmu,
lc_konm TYPE LINE OF /irm/t_gkonmu,
lt_komg TYPE /irm/t_gkomg_index,
lc_komg TYPE LINE OF /irm/t_gkomg_index,
lt_user_data TYPE /irm/t_gpraxfu_index,
lc_user_data TYPE LINE OF /irm/t_gpraxfu_index.
DATA: lc_updt(1) TYPE c.
DATA: lc_knumh TYPE knumh.
DATA: BEGIN OF lc_str_knumh,
hd(2) TYPE c VALUE '$$',
inc_num(8) TYPE c,
END OF lc_str_knumh.
DATA: blank_agree_key TYPE knuma VALUE '~~~~~~~~~~'.
FIELD-SYMBOLS <konh_line> LIKE LINE OF lt_konh.
FIELD-SYMBOLS <konp_line> LIKE LINE OF lt_konp.
DATA: lc_rule TYPE type_key_rule.
READ TABLE pt_agreement INTO lc_rule INDEX 1.
SELECT SINGLE * FROM kona
WHERE vkorg = lc_rule-vkorg
AND vtweg = '10'
AND spart = '10'
AND boart = 'ZPS1'
AND botext = lc_rule-sap_agkey.
IF sy-subrc = 0.
lc_updt = 'U'.
ELSE.
lc_updt = 'I'.
ENDIF.
LOOP AT pt_agreement INTO lc_rule.
MOVE sy-tabix TO lc_str_knumh-inc_num.
CONDENSE lc_str_knumh-inc_num NO-GAPS.
WHILE lc_str_knumh-inc_num+7(1) = ' '.
CONCATENATE '0' lc_str_knumh-inc_num INTO lc_str_knumh-inc_num.
CONDENSE lc_str_knumh-inc_num NO-GAPS.
ENDWHILE.
CONCATENATE '$$' lc_knumh INTO lc_knumh.
MOVE lc_str_knumh TO lc_knumh.
MOVE c_strt_knumh TO lc_knumh.
CLEAR: lc_konh, lc_konp, lc_komg.
MOVE: lc_rule-vkorg TO lc_komg-komg-vkorg,
'10' TO lc_komg-komg-vtweg,
'10' TO lc_komg-komg-spart,
p_waers TO lc_komg-komg-waerk,
'1300' TO lc_komg-komg-bukrs,
lc_rule-lifnr TO lc_komg-komg-lifnr,
lc_knumh TO lc_komg-knumh,
lc_knumh TO lc_konh-knumh,
lc_knumh TO lc_konp-knumh,
lc_rule-datab TO lc_konh-datab,
lc_rule-datbi TO lc_konh-datbi.
CASE lc_rule-tablnam.
WHEN 'A701'. "Every Agreement will have a A701 rule -
"Therefore we acn setup the header using A701
MOVE: 'New ' TO lc_kona-knuma,
lc_rule-vkorg TO lc_kona-vkorg,
'10' TO lc_kona-vtweg,
'10' TO lc_kona-spart,
'ZPS1' TO lc_kona-boart,
'C' TO lc_kona-abtyp,
'V' TO lc_kona-kappl,
p_waers TO lc_kona-waers,
lc_rule-knuma_ag TO lc_kona-abrex,
'ZPS2' TO lc_kona-kobog,
lc_rule-datab TO lc_kona-datab,
lc_rule-datbi TO lc_kona-datbi,
lc_rule-sap_agkey TO lc_kona-botext,
'1300' TO lc_kona-bukrs,
'I' TO lc_kona-updkz.
MOVE: 'New ' TO lc_cbasp-knuma_ag,
'ZPS1' TO lc_cbasp-boart_ag,
p_waers TO lc_cbasp-waers,
'A' TO lc_cbasp-setl_mth,
'B' TO lc_cbasp-setl_typ,
'A2' TO lc_cbasp-ident,
'E' TO lc_cbasp-setlm,
'ZPDA' TO lc_cbasp-pargr,
'X' TO lc_cbasp-npric,
'LF' TO lc_cbasp-stprl,
lc_rule-lifnr TO lc_cbasp-stpar,
lc_rule-contract_rev TO lc_cbasp-rvnum,
'I' TO lc_cbasp-updkz.
CONCATENATE: blank_agree_key
lc_rule-lifnr INTO lc_konh-vakey.
MOVE: lc_rule-lifnr TO lc_konp-lifnr.
WHEN 'A703'.
CONCATENATE: blank_agree_key
lc_rule-kunnr INTO lc_konh-vakey.
MOVE lc_rule-kunnr TO lc_komg-komg-kunnr.
WHEN 'A709'.
CONCATENATE: blank_agree_key
lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_konh-vakey.
CONCATENATE: lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_komg-komg-prodh.
WHEN 'A710'.
CONCATENATE: blank_agree_key
lc_rule-matkl INTO lc_konh-vakey.
MOVE lc_rule-matkl TO lc_komg-komg-matkl.
WHEN 'A711'.
CONCATENATE: blank_agree_key
lc_rule-matnr INTO lc_konh-vakey.
MOVE lc_rule-matnr TO lc_komg-komg-matnr.
IF lc_rule-kschl = 'ZPPL'.
MOVE: 'C' TO lc_konp-krech,
'CAD' TO lc_konp-konwa.
lc_konp-kbetr = lc_rule-net_po_price * 1.
ENDIF.
WHEN 'A717'.
WHEN 'A718'.
CONCATENATE: blank_agree_key
lc_rule-zzextwg INTO lc_konh-vakey.
MOVE lc_rule-zzextwg TO lc_komg-komg-zzextwg.
WHEN 'A719'.
CONCATENATE: blank_agree_key
lc_rule-werks INTO lc_konh-vakey.
MOVE lc_rule-werks TO lc_komg-komg-werks.
WHEN 'A721'.
CONCATENATE: blank_agree_key
lc_rule-kunnr lc_rule-werks INTO lc_konh-vakey.
MOVE: lc_rule-kunnr TO lc_konp-kunnr,
lc_rule-kunnr TO lc_komg-komg-kunnr.
WHEN 'A722'.
CONCATENATE: blank_agree_key
lc_rule-vkbur INTO lc_konh-vakey.
MOVE lc_rule-vkbur TO lc_komg-komg-vkbur.
WHEN 'A724'.
CONCATENATE: blank_agree_key
lc_rule-kunnr lc_rule-vkbur INTO lc_konh-vakey.
MOVE: lc_rule-kunnr TO lc_konp-kunnr,
lc_rule-kunnr TO lc_komg-komg-kunnr,
lc_rule-vkbur TO lc_komg-komg-vkbur.
ENDCASE.
MOVE: 'A' TO lc_konh-kvewe,
lc_rule-tablnam+1(3) TO lc_konh-kotabnr,
lc_rule-kappl TO lc_konh-kappl,
lc_rule-kschl TO lc_konh-kschl.
REPLACE ALL OCCURRENCES OF '~' IN lc_konh-vakey WITH ' '.
APPEND lc_konh TO lt_konh.
CLEAR lc_konh.
*--- Add in the KONP.Do we need to add
MOVE: lc_rule-kappl TO lc_konp-kappl,
lc_rule-kschl TO lc_konp-kschl,
'G' TO lc_konp-krech.
IF lc_rule-kschl+3(1) = '%'.
MOVE: 'A' TO lc_konp-krech,
'%' TO lc_konp-konwa.
lc_konp-kbetr = lc_rule-rebate_perc * 1.
ENDIF.
APPEND lc_konp TO lt_konp. CLEAR lc_konp.
APPEND lc_komg TO lt_komg. CLEAR lc_komg.
ENDLOOP.
IF lc_updt = 'I'.
CALL FUNCTION '/IRM/IPCB_AGREEMENT_CREATE'
EXPORTING
I_MESSAGES_DISPLAY = ' '
I_SAVE_MESSAGES = ' '
I_COMMIT_WORK = 'X'
I_CALL_FROM_WS = ' '
is_kona = lc_kona
is_cbasp = lc_cbasp
it_cbapr = lt_cbapr
it_cbadt = lt_cbadt
it_cbafs = lt_cbafs
it_cbacn = lt_cbacn
it_cbacl = lt_cbacl
it_cbtpv = lt_cbtpv
it_texts = lt_texts
it_cbasd = lt_cbasd
IMPORTING
es_agreement = lc_agreement
e_log_number = lc_e_log_number
TABLES
t_messages = lt_messages
CHANGING
CT_VAKE = lt_vake
ct_konh = lt_konh
ct_konp = lt_konp
CT_KONW = lt_konw
CT_KONM = lt_konm
ct_komg = lt_komg
CT_USER_DATA = lt_usr_data
EXCEPTIONS
no_documents_to_process = 1
no_authorization = 2
creation_failed = 3
new_pricing_not_maitained = 4
OTHERS = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ELSE.
MOVE: lc_agreement-knuma_ag TO po_agreement,
lc_agreement-knuma_ag TO lc_kona-knuma.
ENDIF.
APPEND LINES OF lt_messages TO gt_messages.
ELSE.
MOVE-CORRESPONDING kona TO lc_kona.
ENDIF.
LOOP AT lt_konh ASSIGNING <konh_line>.
MOVE lc_kona-knuma TO <konh_line>-vakey+0(10).
move '&' to <konh_line>-knumh+0(1).
ENDLOOP.
LOOP AT lt_konp ASSIGNING <konp_line>.
MOVE lc_kona-knuma TO <konp_line>-vakey+0(10).
move '&' to <konh_line>-knumh+0(1).
ENDLOOP.
lc_kona-updkz = 'U'.
lc_cbasp-updkz = 'U'.
CLEAR lt_messages.
CALL FUNCTION '/IRM/IPCB_AGREEMENT_CHANGE'
EXPORTING
I_MESSAGES_DISPLAY = ' '
I_SAVE_MESSAGES = ' '
I_COMMIT_WORK = 'X'
I_INIT_DATA = 'X'
is_kona = lc_kona
is_cbasp = lc_cbasp
it_cbapr = lt_cbapr
it_cbadt = lt_cbadt
it_cbafs = lt_cbafs
it_cbacl = lt_cbacl
it_cbacn = lt_cbacn
IT_FIELDS =
it_texts = lt_texts
IMPORTING
e_log_number = lc_e_log_number
TABLES
t_messages = lt_messages
CHANGING
cs_agreement = lc_agreement
CT_VAKE = lt_vake
ct_konh = lt_konh
ct_konp = lt_konp
CT_KONW = lt_konw
CT_KONM = lt_konm
ct_komg = lt_komg
CT_USER_DATA = lt_usr_data
EXCEPTIONS
no_documents_to_process = 1
no_authorization = 2
change_failed = 3
agreement_locked = 4
OTHERS = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ENDIF.
APPEND LINES OF lt_messages TO gt_messages.
ENDFORM. " CREATE_AGREEMENT -
Custome BAPI - declare ITAB and define the Function Module and Subroutine
Hello Experts
I want to create a Custom BAPI and it has the following scenario:
1) a Function Module which collects some records into it internal table, say ITAB
2) a Subroutine which moved the records from ITAB to BAPI table
Now, I want to declare ITAB and define the Function Module and Subroutine.
Where and How can I do this?
Plz suggest.
Regards
BDHi,
1) Got to SE37 and create an RFC .
2) Declare the ITAB directly in the TABLES tab of the FM.
3) Inside the FM source Code tab, collect all the data using SELECT query and directly or by using logic, put the data into the
ITAB.
4) Since the data collected is directly put into the itab you dont need a subroutine to be written.
5) If subroutine is a necessity, then just write PERFORM SUB ROUTINE NAME.
AND DEFINE THE FORM ENDFORM OF THE SUBROUTINE AFTER THE ENDFUNCTION OF THE FM
Let me know if any issues....
Regards,
Vimal. -
How to find out who had deleted the function moldule? S O S
how to find out who had deleted the function moldule Thank you very much.
if this fm was assigned to device class (package) you'll find it in
tables tadir, e070, e071
try with name of function module or function group
hope that helps
Andreas -
How to use the function module 'HR_ES_FEATURE_BACKFIELD'
Hi,
How to use the function module 'HR_ES_FEATURE_BACKFIELD'?
I need the usage from both technical as well as functional point of view.
What is the use of this function module and technically how it is to be used to retrieve a feature for a particular employee.hey iam from functional side can u be little bit clear of that feature
thanks
sikindar -
How to findout the Function module for a particular object
Hello friends,
Related to my thread, there was one thread in the forum,to find out the function module for a particular object.I tried the solution provided my our experts but couldn't got the results.Thats why i am putting this thread again.
I want to find out the function modules used for the particular object, i.e. Production order.
solution i tried is, first go to T.C SE37, then in function module field put the object name like Production order and enter, than it will show another screen, there also put object name in function module field and than press enter, it will show all the function modules available for that object.
So could you guys help me out to find out where i am wrong in the process of finding out the function module for a particular object.
Plz don't bother abt the point.Helpful answers will definitely get awarded.
Thanking you guys for your valuable support till now and hoping to get in future too.Dear
When the problem is solved please give points too. Otherwise why people will help others, give time and share their valuable knowledge. This will build up self confidence.
If not solved and closing, then mention the difficulties what u exactly looking for. Simpy closing is not enough because who ever is providing solution will not able to know the real problem.
How to give points I believe u already know that and need not explain.
I had seen many times this problem with others too. Even if the problem is totally resolved they give 2 in stead of 10.
Edited by: BNR on Sep 21, 2008 6:10 PM -
How to use the function module CONVERSION_FACTOR_GET?
Hi Experts,
I have to use convert the value of a field from units 'HL' to 'HHL'. According to me, we can use the function module CONVERSION_FACTOR_GET. However, i am not able to know how to use it?
Can anyone explain how to use the FM, i mean what should be the importing and exporting parameter.... For recap, i need to convert HL to HHL, for example 3 HL to 0.03 HHL.
Please help.
Rewards for sure!
Thanks in advance.
AkshHi
If it is Unit Conversion better use the following Fun modules
UNIT_CONVERSION_SIMPLE
MD_CONVERT_MATERIAL_UNIT
goto SE37 first and execute them by entering some value and then use it in the code after confirming it
Regards
Anji -
How to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'
Dear Experts,
Can anyone Explain me how to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'.My Requirement is i want to change the Partners of the Service Order.It is Very Urgent Requirement Please Help me.
Thanks & Regards,
Ashok.Hi,
For service order you can use FM 'BAPI_ACTIVITYCRM_CHANGEMULTI' as it is much easier to use.
Sample code is below. You can use that:
"fill the details of partner which is
"to be added as main partner or in place of Interaction Agent
wa_partner_new-ref_guid = w_guid_ref.
wa_partner_new-ref_handle = '0000000000'.
wa_partner_new-ref_kind = 'A'.
wa_partner_new-kind_of_entry = wa_partner-kind_of_entry.
wa_partner_new-ref_partner_handle = '0000'.
wa_partner_new-ref_partner_fct = 'Z_IA'.
"wa_partner-partner_no : New partner no.
wa_partner_new-ref_partner_no = wa_partner-partner_no.
wa_partner_new-ref_no_type = wa_partner-ref_no_type.
wa_partner_new-ref_display_type = wa_partner-ref_display_type.
wa_partner_new-display_type = 'BP'.
wa_partner_new-no_type = 'BP'.
wa_partner_new-partner_fct = 'Z_IA'.
"w_partner_no : Old partner no. which is to be changed
wa_partner_new-partner_no = w_partner_no.
wa_partner_new-mainpartner = 'X'.
INSERT wa_partner_new INTO TABLE it_partner_new.
wa_partner_newx-display_type = 'X'.
wa_partner_newx-no_type = 'X'.
wa_partner_newx-partner_fct = 'X'.
wa_partner_newx-partner_no = 'X'.
wa_partner_newx-mainpartner = 'X'.
INSERT wa_partner_newx INTO TABLE it_partner_newx.
IF it_partner_new[] IS NOT INITIAL AND it_partner_newx[] IS NOT INITIAL.
"maintain all changes to be done
CALL FUNCTION 'BAPI_ACTIVITYCRM_CHANGEMULTI'
TABLES
partner = it_partner_new
partnerx = it_partner_newx.
CLEAR : wa_guid1.
REFRESH : it_guid1.
wa_guid1-guid = w_guid_ref.
APPEND wa_guid1 TO it_guid1.
"save the changes
CALL FUNCTION 'BAPI_ACTIVITYCRM_SAVE'
TABLES
objects_to_save = it_guid1.
"commit the transaction
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
Reply fro any further help.
Please reward points if helpful.
Regards,
Ashlesha
Maybe you are looking for
-
Hi, I have done the customization for automatic PO during GR. The system is creating a purchase order with the Info record price. Now my question is: Since the cost of the item is totally fluctuating is it technically possible to enter the cost duri
-
I can't show the correct event .
I have check again . I had written Oval, Rectangle and Line JButton. However, I just show circle. I think this parts of the code has problem :but I don't clear And the following has this all code(2 file) , thx a lot ! '*******************************
-
Transitioning from iPhoto 6 to Aperture on new iMac
Please redirect me if there is somewhere this has been asked, or if there would be a better resource for me. I guess I have several issues here. We have a 2006 iMac with about 12,000 photos stored in iPhoto 6. I am a serious hobbyist, and want to tra
-
Help! Edited photos not uploading to flickr.
Hi! I am trying to upload a batch of photos, edited in ipad 2 ios7 and saved to camera roll, to flickr. However 1) I can only send 10 at a time from the camera roll directly (which does send the edited versions) and 2) when I try to use an app, the o
-
PL 05 Bizflow blocked in processing status
Hello, I just install the PL05 of B1i, with JDBC driver for SQL server 2005. I tried to resubmit MATMAS03 object via B1i: extras/Error Inbox/<My subsidiary>/Retry, the object is removed from the error list but is not processed (no line is logged in B