How to catch the CC's error in the alert inbox(RFC to File)
Dear All,
I'm now have a question about catching the CC's error.
The interface is RFC to File, when the sender CC had a error(for example:RFC adapter's connection information was wrong) , there was not error message in the alert inbox even though I set all the condition of the alert rule with "*".
where is the problem?
thanks,
Sam
Hey
First of all check SLG1 if any alerts were triggered for the error.
Secondly uncheck "Suppress multiple alerts of this rule" option in alert configuration in RWB,it might be checked right now.
Thanks
Aamir
Similar Messages
-
Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install. Appreciate if someone in the forum can help.
The backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod. The iCloud backup and restore took a long time, but worked. I was very grateful.
Trying again to backup to iTunes locally proved to be the same challenging problem. The same backup to corrupt file was the message. The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error.
When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy. Any restore would need to be from the iCloud which already worked but isn't the final solution.
Your suggestions were good, I am just in the same boat. Any thoughts about doing the following?
1) creating a cloud backup
2) resetting the iPod to factory defaults
3) removing all traces of iTunes from my computer and
4) installing iTunes and setting up iPod from scratch.
This is the next thing on my list. -
Hi,
After migrating to Spring webflow 2.4.0 , I am getting the below mentioned error in the weblogic console.
<Jun 26, 2014 12:14:45 PM IST> <Error> <javax.enterprise.resource.webcontainer.jsf.application> <BEA-000000> <Unable to determine expected return type for java.util.List()>.
It doesn't affect the application but not able to find the cause for it.
Regards,
SnehaAfter many hard working days.i finally found the error cause,i needed to make weblogic datasource also ADF doesnt work on internet explorer browser,it works on safary.hope it helps somebody
-
I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683) -
users are able to pick the SSAS database and cube, it's at the final step and suddenly excel had this error:
The following system error occurred: the server threw an exception...
Other users have no such issues at all
any ideas?
thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --Hi Cat_ca,
Glad to hear that your issue had been solved by yourself. Thank you for your sharing.
Regards,
Charlie Liao
TechNet Community Support -
I am getting the below dump error at the time of posting F-02.
Hi ,
Can any body help on the below issue .
I am getting the below dump error at the time of posting F-02.
Runtime Errors RAISE_EXCEPTION
Date and Time 26.08.2009 13:12:09
Short text
Exception condition "WRONG_PARAMETERS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLGLT2" raised the exception
condition "WRONG_PARAMETERS".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Trigger Location of Runtime Error
Program SAPLGLT2
Include LGLT2F07
Row 52
Module type (FUNCTION)Line SourceCde
22 E_SPLIT+000016(000010) = I_ACCIT-KOSTL .
23 ENDIF.
24 ENDIF.
25 IF NOT i_accit-PRCTR IS INITIAL.
26 E_SPLIT+000026(000010) = I_ACCIT-PRCTR .
27 ENDIF.
28 IF I_BS_FIELDS IS INITIAL.
29 IF NOT i_accit-PS_PSP_PNR IS INITIAL.
30 E_SPLIT+000036(000008) = I_ACCIT-PS_PSP_PNR .
31 ENDIF.
32 ENDIF.
33 IF NOT i_accit-SEGMENT IS INITIAL.
34 E_SPLIT+000044(000010) = I_ACCIT-SEGMENT .
35 ENDIF.
36 IF NOT i_accit-PARGB IS INITIAL.
37 E_PARTNER+000000(000004) = I_ACCIT-PARGB .
38 ENDIF.
39 IF NOT i_accit-PPRCTR IS INITIAL.
40 E_PARTNER+000004(000010) = I_ACCIT-PPRCTR .
41 ENDIF.
42 IF NOT i_accit-PSEGMENT IS INITIAL.
43 E_PARTNER+000014(000010) = I_ACCIT-PSEGMENT .
44 ENDIF.
45 E_BALANCE+000000(000004) = I_ACCIT-GSBER .
46 E_BALANCE+000004(000010) = I_ACCIT-PRCTR .
47 E_BALANCE+000014(000010) = I_ACCIT-SEGMENT .
48 E_SPL_PAR+000000(000004) = I_ACCIT-GSBER .
49 E_SPL_PAR+000004(000010) = I_ACCIT-PRCTR .
50 E_SPL_PAR+000014(000010) = I_ACCIT-SEGMENT .
51 ELSE.
>>>>> RAISE WRONG_PARAMETERS.
53 ENDIF.Hello,
I guess, you activated document splitting.
Please refer OSS note below,
Note 1295877 - RAISE_EXCEPTION when navigating to Cust. for doc. splitting
Note 985672 - Subsequently posting FI docs: Runtime error WRONG_PARAMETERS
Regards,
Burak -
How to make a .exe without errors about the costum scaling
Hello everybody,
i'm new with Ni-Labview,
i'm trying to make a .exe file of my application, this is working perfect, but if i make costum scales in my Daq Assist options and i make the vi in a .Exe then there are always errors if i open it on another computer... if i put every Daq Assist box to the ''no scale'' option, then the exe is working on another computer...
it is working good on the computer where i build the vi on...
but of coarse i'm not planning to put the hole software (labview) on that other computer... that's where the .exe file is for i guess...
i have 1 Daq Assist that is programmed with a scale that converts 0-5 volts to 0-3000(rpm) this is a output voltage
and the other daq assist box is programmed with a scale that 0-1volts is 0-3000(rpm) this is a input voltage
everything is working like i want it to work on my computer where i build the application, but if i make a .exe file of it, including all the Daq Mx drivers and so on then this file is not working.... so i made a error box at the end of the daq assist to see what is happening and if i open it then on another computer then it tould me that there where errors with the scaling i made... but i don't see the problem????
is anyone having this problem also? or maybe i do something wrong???? i really don't know how to solve this problem... and it should not be that hard,... i'm sure of it....
hope someone could help me....
i use a Ni-USB 6211
thanks for reading this and hope to hear something soon!
thanks
Kind Regars,
KrisHello There,
i have one more question that i can't figure out....
i have a vi in attachment that you can open hopefully....
in the block diagram you see 1 Dial, this is the left dial in the screen... now this is the setpoint of the PID regulator..
what i want is a Analog input to be the Setpoint of the PID Regulator Also... i prefer to have little button or something so i can choose what i use , or the Dial on the computer(with the mouse) Or a Analog input from external device 0-10V input
i have try'd a lot of things but the only thing that is everytime popping up:
Possible reason(s):
NI Platform Services: The specified resource is reserved. The operation could not be completed as specified.
i can't solve it..... is there anybody who have an idea how to put things straight and working?
Thanks!
Kind Regards,
Attachments:
PWM Module TEST1.vi 117 KB -
After my pc system updated. I cannot open itune properly.Then I try to remove and re-install it again.
However, the pc said "Runtime error : R6034, the application has made an attempt to load the C runtime library incorrectly. Please contact application's support...""
How can I solve this ?
Please help !!!!!!!!!!!See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
How to add an Application custom error to the FacesPageLifecycle
I am trying to implement an error handling framework for an application. I have created the required Execption classes(Extending the JboException class) and added a MyExceptionHandler that extends DCErrorHandlerImpl. I am overriding the reportExecption method and removing the error codes etc.
When an error case is encountered MyExceptionHandler.reportException is called from the page bean. This does not display the error in the Faces error dialog. I have noticed that MyExceptionHandler.getDisplayMessage is not invoked for my the custom application errors.
Other JboExecption generated by the database constraints or validation errors are shown in the error dialog and there is a call to the getDisplayMessage after the call to reportException in the MyExceptionHandler.
Should I explicitly call FacesPageLifecycle.addError...or something similar? If so what is the right place to do this.
Please point me to any available documentation if available.
Thanks,
SireeshaThat custom error handler is generally to handle errors thrown by your Model project. The place I first noticed this is when I tried to catch and specially handle the infamous token validation exception (even though that's a JBO exception, it's thrown by the databindings, not by the Model project...which is kind of unfortunate, I think; they should have used something in the oracle.adf.model package, which is where the other databinding implementations are stored). To really catch all exceptions, you have to handle them directly in the FacesPageLifecycle, not the ErrorHandler.
Edited by: Avrom Roy-Faderman on Oct 2, 2008 1:32 PM
Wait...were you also calling handler.reportException() directly? You're definitely not supposed to do that. Just throw your exceptions, and the appropriate functions will be called automatically as part of the lifecycle. This is independent of the other problem--that ErrorHandler never gets used for exceptions thrown from outside the business services layer. -
How do I fix a download error when the process stops before finishing
I purchased a season of a tv show. Most of the episodes worked fine, but three episodes were automatically stopped and a "download error -50" message appeared. It will not restart. Is ther a ifx?
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/com.apple.appstore"
- It will take you to a folder. Delete the whole folder and empty the trash.
- Launch the App Store. Do what you have to do. -
Unable to debug the Data Template Error in the Log file
Hi,
I am unable to debug the log file error message Please can anybody explain me in detail where the error lies and how to solve the error.The log file shows the following message.
XDO Data Engine ver 1.0
Resp: 50554
Org ID : 204
Request ID: 2865643
All Parameters: USER_ID=1318:REPORT_TYPE=Report Only:P_SET_OF_BOOKS_ID=1:TRNS_STATUS=Posted:P_APPROVED=Not Approved:PERIOD=Sep-05
Data Template Code: ILDVAPDN
Data Template Application Short Name: CLE
Debug Flag: Y
{TRNS_STATUS=Posted, REPORT_TYPE=Report Only, PERIOD=Sep-05, USER_ID=1318, P_SET_OF_BOOKS_ID=1, P_APPROVED=Not Approved}
Calling XDO Data Engine...
java.lang.NullPointerException
at oracle.apps.xdo.dataengine.DataTemplateParser.getObjectVlaue(DataTemplateParser.java:1424)
at oracle.apps.xdo.dataengine.DataTemplateParser.replaceSubstituteVariables(DataTemplateParser.java:1226)
at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:398)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:281)
at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:251)
at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:192)
at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:222)
at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:334)
at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:236)
at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:272)
at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
Start of log messages from FND_FILE
Start of After parameter Report Trigger Execution..
Gl Set of Books.....P
Organization NameVision Operations
Entering TRNS STATUS POSTED****** 648Posted
end of the trns status..687 Posted
currency_code 20USD
P_PRECISION 272
precision 332
GL NAME 40Vision Operations (USA)
Executing the procedure get format ..
ExecutED the procedure get format and the Result..
End of Before Report Execution..
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 2865643 on node AP615CMR at 28-SEP-2006 07:58:26.
Post-processing of request 2865643 failed at 28-SEP-2006 07:58:38 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 28-SEP-2006 07:58:38
Thanks & Regards
Suresh SinghGenerally the DBAs are aware of the OPP service log. They can tell you the cause of the problem.
Anyway, how did you resolve the issue? -
Bica: change the query cause error in the pas model
Dear friends,
We have very simple scenario: one query 'SSM_SQL_KPI_MAY'' for feeding the pas model- 2 demensions and 2 measures. With this query I load the schema and data to the pas model.Everithing was fine. After that we added new dimension to the query.Ichanged the existing query and load the data with bica.But when I try to open the model I get the next error every time
DAT316:
No internal Dimenson unique name to position cache exists for 'EZOR_KEY' on Linkid 'BI' Cube 'SSMKPI/SSM_SQL_KPI_MAY'
We try to resolve the issue by deleting data and schema but every time I get the same error.
How is it possible to resolve this issue?
What is a best practice in the case of changing queries working with bica?
Thanks.
Best regards,Orit.Dear Orit,
Keep in mind that dimensions provided by a BICA query connection must have a HIERARCHY associated to the base characteristic in BW. PAS uses this hierarchy to define the "Result" (rollup) levels of the dimension. Check your BW query and verifiy that all the included dimensions have associated hierarchies in use. I'm guessing this is the issue with your new dimension.
You can also check the dimensions in PAS by selecting your model, then "Dimensions" and right-clicking on the affected dimension name and then the "View" option (or "List" or something related to displaying the dimension definition). You should see a PAS script that describes the dimension, including the dimension member IDs, descriptions and rollup levels. This should be consistent with your query results and hierarchies).
Also, from the same menú you may also choose to "Delete" a dimension.
Good luck!
Regards -
I am trying to burn an imovie to a DVD. I keep getting the message multiplex error. I do not know what to do. Please, can anyone help me.
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
OMG The Most Annoying Error in the History of iPhoto! "Alert, Photo Missing
This is driving me absolutely insane. EVERY photo that is imported into my iphoto brings an "Alert" that says, "The photo "Blah blah" could not be opened because the original item cannot be found". It's like, I DON'T CARE, upload the photo. How do I get rid of these errors that are meaningless?
What type of library are you using: a referenced library< where the photos are not copied into the library when imported< or a managed library, where the photos are copied into the library? Does the message ask you to find the original file? If so then it's a referenced library.
It will depend on the type of library as to how to go about trying to recover it.
<blockquote align="left">
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Display the report server error in the application
i have got an error while running the report from the application , the status of the report was "TERMINATED_WITH_ERROR" which come from the "REPORT_OBJECT_STATUS" built in function ,
when i go to the application server to the failed jobs i got :
Terminated with error: REP-1401: ??? ??? ???? ?? PL/SQL: 'cf_1formula'.
ORA-01403: ?? ??? ?????? ??? ??? ??????
the problem is i wan to display to the end user this error ORA-01403
not only "TERMINATED_WITH_ERROR" .....
please help me
thanksGive a button in your web page with 'Check status' which on hitting, make an ajax call, to query the status table, and show the status in that page.
Hope this helps
Maybe you are looking for
-
Problems with installing iTunes
I got a new iPhone yesterday, came home and wanted to install iTunes. iTunes was installed on my laptop before but since nobody was using it I just uninstalled it. When I'm trying to install it now I just can't. The process starts normally but after
-
New to this version of Logic Pro, I am now using version 8. As you know, when I click on EXS24 button under I/O it opens the semi-transparent gray window that says Inst 1 which is my EXS24. In the gray window I see that there are two options under vi
-
Hi, I'm trying to find and download 3g driver for ThinkPad x200s but i cant find it. Can you send me link or tell me how to install drivers for 3g modem. Thx. Solved! Go to Solution.
-
13" Macbook Pro Retina Haswell vs 15" Macbook Pro Retina Early 2013 Refurbished
Interested in buying my first mac this year so i'm weighing the options. Im looking to spend around $2000 for a retina macbook pro, and im trying to decide between: 13-inch: 2.6GHz with Retina display for $1929 Specifications 2.6GHz dual-core Intel C
-
hi my friends, I have this procedure: PROCEDURE incluir_alterar( p_id_empresa IN VARCHAR2, p_id_pessoa_juridica IN VARCHAR2, p_cnpj IN VARCHAR2, p_id_tipo_documento IN VARCHAR2, p_ie