How to Center Text in Menu and Left Align in Sub Menu

Hi - I'm looking to Center the text in the main menu of a Spry Menu in DW CS 5.5 but left align the sub menu's.
If someone could point me in the right direction it would be much appreciated.
Thanks
J

See here http://labs.adobe.com/technologies/spry/samples/menubar/CenteringHorizontalMenuBarSample.h tml
Gramps

Similar Messages

How to center text in shapes

how to center text in shapes. specifically circles. I want text to be centered directly in the middle

A lot depends on what you mean by centered, the number of lines of text, the actual font, and whether there are descenders.
Using vertical justification set to centered may or may not work for you, depending on the above factors, as it depends on the baseline, I believe, rather than the acutal glyph dimensions. You could try adding baseline shift, I suppose, to make fine vertical adjustments, or you can bite the bullet and use the old-fashioned method of two frames.

How to print text on back and back of page in smartforms

How to print text on back and back of page in smartforms.

Prince,
in page's output option you can set D for double-sided.
Default: No change of print mode
S     Begin new page in SIMPLEX mode (single-sided)
D     Begin new page in DUPLEX mode (double-sided)
T     Begin new page in TUMBLE DUPLEX mode (double-sided)
Amit.

At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs

At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs every time I open Firefox. How can I stop or disable this?
== This happened ==
Every time Firefox opened
== Several weeks ago.

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the ''updates'' and ''updates\0'' folder:
Vista/Windows7:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\ (updates)
C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\ (updates)
%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates\

How do i readjust the right and left speaker in iPod nano 2nd gen.

How do i readjust the right and left speaker in iPod nano 2nd gen.

Are you playing a song in iTunes that listed in contents of iPod while it is connected. Try going to your music lib and play a song and disconnect your iPod.
Also, make sure you are not located in some sub dir that utililizes iTunes.
You can also hit 'ctrl,alt,delete' to see what applications are running on your PC.

How to center text in Pages to show correctly on iBook Reader

Hi,
First, I have to say that I posted the same question on ''Creating ePubs'' discussioun page but nobody could help.
I am trying something really easy but could not solve it. Hope someone can help.
Ok, I know that if I choose ''Chapte Name'' as a pharagraph style, iBook reader automatically puts it into a new page, so the new page starts with the chapter name on top. I dont have any problems with my chapters.
However, I want my book to start with a page that has a brief info about the author. I want this info in the middle of the page (also centered in the middle). Than I want to go to the second page with a ''dedication'' part where I write my thanks to people. I also want this in the middle and centered. And finally I want to add my book title and author name together on the 3rd page. After that the chapters will start.
So, as I told you, the chapters work just fine. But when I try to center the text in the first 3 pages, (I press return several times on my keybord to do it) the pages interwine with each other. For example, the last part of page 2 goes on top of page 3.
I think this happens because I press the return key to center the texts. So, is there a way to lock texts to the pages where they belong to prevent them to interwine with other pages even if I press return to center the text
OR
Is there another way to center text to prevent them to interwine with other pages...
Thank you

One of the consequences of working all night on this was that there is errata, or improved insight.
As I mentioned previously, each of the four document parts that I tested is in its own section. This means that each of the first three document icons, in thumbnail view, has its own distinct yellow race track around it. The chapter/body text is in a fourth multi-page section.
On the first page, with invisibles and layout mode shown, I have a ¶ (pilcrow) showing on line 1, column 1. If I place the cursor before this mark, the text inspector shows the following:
Style is body
Character spacing is 0%
Line spacing is single (1)
Before paragraph is set to 172 pt.
After paragraph is set to 6 pt.
Now, if I place the cursor before the About the Author string:
Ruler set to 1.6 inches
Style is Heading 1
Character spacing is 0%
Line Spscing is single (1)
Before paragraph is set to 196 pt
After paragraph is set to 6 pt
Place cursor between end of Author and Pilcrow and press return.
With the cursor before the author description:
Style is body
My font choice was Baskerville, Regular 12 pt.
Left ruler set to 1.6 inches. Right ruler to 6.2 inches.
Character spacing is -4%
Line-height is set at multiple (1.2)
Before paragraph is 0
After paragraph is 12 pt.
Position cursor between last character and pilcrow - press return.
Insert section break
This is all there is too my first page:
For the Dedication page:
Line 1, Col 1 has the pilcrow and style is body
Character spacing is 0%
Line height is single (1)
Before and After paragraph are set to 0
With the cursor just before Dedication:
Left ruler set at 2.6 inches
Style is Heading 1
Character spacing is 0
Line height is 1.5
Before paragraph set to 190 pt
After paragraph set to 0 (yeah, raised my eyebrow too)
Place cursor between trailing n and pilcrow, press return.
With cursor on first line of names, just prior to first character:
Style is body text with Baskerville Regular 12 pt override.
Text justification is left.
Left ruler is set to 2.9 inches
Right ruler is set to 6.7 inches
Character spacing is 0
Line-height is 1.2
Before and after paragraph are 0
Insert cursor before last Pilcrow and press return
On the next line, there is a Pilcrow at col 1, place the cursor in front of it.
Style is body style
Character spacing is 0
Line-height is multiple (1.2)
Before paragraph is 0
After paragraph is 216 pt.
Press return to set the jump.
Insert section break
You can likely insert step 14 at step 7 and skip 9 - 13. It was late.
The Dedication page looks like this:
Hopefully, you missed something, or it wasn't sufficiently explained previously. I hope you can duplicate the above and discover unique, centered content in your ePub.

How to center site in browsers. Currently aligned left.

Please tell me how to center my website in the browser windows. It is currently lining up completely to the left with a lot of white space on the right.
What code do I add and where. Thanks a lot.

Go to Code View in DW.
On line 240, delete
<div align="center">
Around line 25
change
<body>
<table width="760" border="0" cellspacing="0" cellpadding="0">
to
<body>
<div align="center">
<table width="760" border="0" cellspacing="0" cellpadding="0">

Text that is both centered and left aligned

I have many text frames that contain 2 or 3 paragraphs. The paragraphs need to be left aligned. However, they also need to be centered horizontally within their respective text frames (like the example on the right in the picture below). Each set of paragraphs has different lengths, so it would be tedious to have to change the indent on each one or change tabs for each one.
Is it possible to do this in InDesign CS4 without having to manually position each one?

jay fresno wrote:
Peter,
A table is a great idea. However, I don't think it will work in this case because of other layout considerations. I'm doing a layout that consists of picture frames and text frames. Each picture frame and text frame are grouped together. On each page I'm planning to have a large text frame that contains multiple groups of picture frames and text frames. In the image below there are 9 groups within a single text frame.The large text frames that contain all the groups are threaded to another large text frame on the next page, which also contains sets of grouped picture and text frames.
The reason for this type of layout is so that a user can insert a new picture/text frame group and all the other groups will automatically move to the right. Or, if a group is deleted, all the other groups will move to the left.
On some of the pages, there will be a different layout with large group in the lower part of the page (as in the bottom image). At this time, in the bottom image, there are 3 groups in the top row, and there is a single group in the bottom row that contains 3 sets of picture/image groups.
I am really wrestling with this layout. How the text aligns is a minor consideration. The main challenge is how to make it easy for the user to insert and delete groups of picture/text frames so that all the groups flow the way they should.
I hope I've described this understandably. I'm open to any suggestions that will make this layout easier to use.
Hi, Jay:
Pictures are worth zillions of words, didn't you hear?<G>
I'm not a designer or layout production guy, so I'm just speculating. If I understand your need to add or delete one or more picture/caption items and have others fill in, horizontal threaded frames may work. For the first page, three horizontal frames, threaded from top-right to middle-left, mid-right to bottom-left. Delete any unit and others flow back; add any unit(s) and the other flow forward - you'd need Smart Text Reflow to flow to a new page.
Something similar might work for the second page's layout.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

How to create a new transaction and add it to Area Menu

Hi.
I have to create a report and run the report using the Tcode and Tcode has to be added in the Area Menu at the initial screen.
Please tell me how can i do that.
Thank you in advance

You can add additional menu transaction in the SAP main menu without affecting the original SAP default area menu S000.
For example, you have created a transaction code called ( z123 - ABC Own Report ) and you want to insert it under Logistics. The specific user will be able to access ABC Own Report by clicking Logistics -> ABC Own Report.
Steps :-
Goto Transaction SE43 - Area Menu
Click the copy button. Copy from S000 to ZXXX
After copying, click Change (area menu ZXXX)
Double click on Logistics and add in your transaction code in the AreaMenu.
Remembers to Activate it.
Next Goto Transaction SU01 - Maintain users
Type in the user name and click the Defaults button
Type in the area menu (ZXXX) in the Start Menu field.
Click Save
The user will be able to see the additional transaction on the next logon.
The CUA area menus are converted to tree navigation in Release 4.6A. The menu contents are automatically copied into a new data structure in Upgrade to Release 4.6A or higher. You can edit Area Menus with a new maintenance interface (Area Menu maintenance transaction: SE43 ).
Reporting Tree Integration - Only transactions could previously be put in Area Menus. From Release 4.6A you can also put all the types of reports which are in reporting trees, in Area Menus. The system automatically assigns a transaction code to call the report from the menu. If you have already put the report in another Area Menu, no new transaction code is generated, the unique transaction code already assigned is used.
You can create Area Menus from complete reporting trees with the migration transaction RTTREE_MIGRATION . The report transaction codes are generated automatically.
Reporting trees can only be displayed. They cannot be maintained. To modify the contents of reporting trees, you must convert them with the migration transaction. You can then modify the contents with the Area Menu maintenance.

How can I return to where I left off on a menu?

I have a menu with 6 items in it. When you select each item you are taken to that page and then you click on the return to menu button and are taken to the number 1 item on the list each time you return to the list.
I want to come back to where I left off in the menu rather then starting over each time. So, if I am on list item #2 and come back to menu I want to come back to list item #2 to navigate down to item #3 or even come back to list item #3. I do not want to came back to list item #1 everytime and then have to scroll down farther each time.
Any help in the right direction?
Jerome

If you 6 menu buttons are pointing to Tracks then select the Track and in the property inpector you can set the Menu Remote Control options. Set Menu to the button on the menu you want to jump to.
You can set this option individually for chapters in a Track also so,
HTH,
-Jake

How to center text in Pages to correctly show on iBook reader

Hi,
I am trying something really easy but could not solve it. Hope someone can help.
Ok, I know that if I choose ''Chapte Name'' as a pharagraph style, iBook reader automatically puts it into a new page, so the new page starts with the chapter name on top. I dont have any problems with my chapters.
However, I want my book to start with a page that has a brief info about the author. I want this info in the middle of the page (also centered in the middle). Than I want to go to the second page with a ''dedication'' part where I write my thanks to people. I also want this in the middle and centered. And finally I want to add my book title and author name together on the 3rd page. After that the chapters will start.
So, as I told you, the chapters work just fine. But when I try to center the text in the first 3 pages, (I press return several times on my keybord to do it) the pages interwine with each other. For example, the last part of page 2 goes on top of page 3.
I think this happens because I press the return key to center the texts. So, is there a way to lock texts to the pages where they belong to prevent them to interwine with other pages even if I press return to center the text
OR
Is there another way to center text to prevent them to interwine with other pages...
Thank you

You could try asking in the Pages forum
https://discussions.apple.com/community/iwork/pages

How to make a play all menu and a play single movies menu

Hi, I'm a noob with Encore and trying to make a dvd menu, but can't seem to get it right.
I have in total 6 movieclips which I would like to make en menu for. I have made a menu, where there are a play all button and a kind of chapter button.
I have linked alle movies as end action to each other, expect the last of cause - paly all menu done - check
Then in the "chaptersmenu" I took the first clip and changed the override setting to the "chaptersmenu", but when I do that the link between clip 2 and 3 becomes dashed instead of solid, and when I preview it stops after the second clip on play all.
What am I doing wrong and how should I do it, to accomplis what I like?

Just to recap, so I understand it correct.
I link each movie specific button to the specific movie, with action of "last menu" and no override. Then for the play all, I create en playlist containing all movies, and the play all button is then linked to that playlist.
I'll try that when I get home. After I made the question yesterday, I came to think, if I could use Premiere to help me out. So I made a sequence, with all movies in, and created some chapter marks, and that I could get to Work in Encore. So now the computer is just sweating to create the dvd structure, so I can test it.
I don't know which is the correct way to do it, or if it just a matter of taste, but it seems that Premiere sequence requires a lot more space on the disk then with separate movies. But I have dual layer disks, so guess that doesn't make any difference.

How to index text in TIFF and DWG files - and the attributes of the files

Hi all
Scenario
Portal installation with a TREX on the side (NW7.0).
No enterprise search involved.
Questions
1) Is it possible for the TREX to extract text from .DWG and .TIFF files in any standard way?
2) Is it possible to index custom properties that are maintained on a DWG-file and a TIFF-file? Or is it only the name and description fields that will be indexed?
3) If it is not possible for the TREX to extract text from DWG-files and TIFF-files, do you know of a third-party filter for TREX like dwgifilter for Microsoft software? http://www.dwgifilter.com/default.aspx
4) Would it be possible to code and implement your own python extension in order for OCR to work with the TREX? If yes, would this be a complicated or fairly easy task? Where would you start... ?
Thanks!
Best regards,
Martin

Hi,
my answers:
1) Is it possible for the TREX to extract text from .DWG and .TIFF files in any standard way?
for TIFF Not in the standard delivery. You have to develop this features.
for DWG? perhaps AutoCAD Interchange and Native Drawing Formats (DXF and DWG)
V. 2.5 - 2.6, 9.0 - 14.0, 2000i - 2002
see help.sap.com
2) Is it possible to index custom properties that are maintained on a DWG-file and a TIFF-file? Or is it only the name and description fields that will be indexed?
Within KM you can define some Meta-Properties. During upload of your documents you can maintain the values for this proerties for every file. It is possible to search for the content of the properties as well.
3) If it is not possible for the TREX to extract text from DWG-files and TIFF-files, do you know of a third-party filter for TREX like dwgifilter for Microsoft software? http://www.dwgifilter.com/default.aspx
I am not quite sure but I think there doesn't exist a third party solution for this.
4) Would it be possible to code and implement your own python extension in order for OCR to work with the TREX? If yes, would this be a complicated or fairly easy task? Where would you start... ?
You can implement your own python extention.
Add your coding for python extention in the default python extention code.
Best regards
Frank

Horizontal menu widget - left alignment

Does anyone know an easy way how to align the text within a submenu of the Muse CC horizontal menu widget to the left instead of the standard center-alignment?

Select the submenu container and hit the Align left button in the Text panel (you may have to toggle between center and left to make this work).
Thanks,
Vinayak

How to create a menu with pages linked as sub menu in ADF?

Hi Experts,
I'm new to ADF and trying to create a menu like below in ADF.
Actions Menu
|
|
Option 1 -- A page with some static text and links.
Option 2 - A different page with some static text and links.
Have evaluated options like panelGroupLayout and menu components, requesting experts opinion on the best way to do it.
Thanks in advance..

Thanks AP.
Not like outlook. Here's some more details on what I'm looking for.
Create a menu bar.
Create a menu called "Actions"
Create two items under it called "Option1" and "Option2".
When I move the mouse over "Option1", I want a page to be shown on the right (just like how a sub menu will be displayed usually).
When I move the mouse over "Option2", I want to show a different page on the right (just like how a sub menu will be displayed usually).
Thanks in advance.
Edited by: Muruhanantham C on Dec 28, 2012 12:51 PM

How to Center Text in Menu and Left Align in Sub Menu

Similar Messages

Maybe you are looking for