How to change '2 Outputs' to '1 Stereo' in Sequence Settings

Any ideas how to change audio to '2 Outputs' to '1 Stereo' in Sequence Settings of FCP5.1.4? I'm always having to render my audio after importing!

My about-box reads:
"Studio Edition Version 10.1.3.1.0.3984"
"Build JDEVADF_10.1.3.1.0_NT_061009.1404.3984" (arrgh, please make an option to copy/paste this...)
Have you accidentally switched 2 ciphers, Frank? By the way, I found the reason for this - I had set the "J2SE version" under "Libraries" to "1.4.2_06" earlier to make sure about 1.4.2 compatibility - but since we soon don't need this any longer, I'm switching this value to 1.5.0 to be able to fully utilize 1.5 options in my code.
So... I guess we can say, that this was my own fault.
Thanks,
Jacob

Similar Messages

Changing "2 Outputs" to "1 Stereo" To Match Sequence and Clips

I'm using Final Cut Pro 6.0.4 on a Macbook Pro. I initially posted this question on the wrong forum I think (Final Cut Pro X) but can't figure out how to just move it here, so I am posting it here.
My footage is:
1440x810, 29.7 fps, MPEG-4 Video Compressor, 44.1 KHz aud rate, 32-bit floating point.
The audio is set at "1 stereo."
My sequence is:
1440x810, 29.7 fps, MPEG-4 Video Compressor, 44.1 KHz aud rate, 32-bit floating point.
The audio is set at "2 outputs."
When I drop footage into the sequence, it says the audio needs to be rendered. The only thing that doesn't match between the sequence and the footage is the Audio Outputs. I did select to have my sequence match clip settings when prompted. I've looked through sequence settings and nothing changed it, and I cannot for the life of me figure out how to change "2 outputs" to "1 stereo" (or vice versa) without having to re-compress all the footage and then re-import it.
I also tried the "Match Audio Outputs" command, but nothing changed when I did that either.
I have this problem every time I edit and usually just resort to re-compressing the footage, but that can take days and I'd like to avoid that.
Am I missing something?

I didn't record the footage, I'm just the editor. I can ask Julie & Brandy (the people in the video) what camera they used if that's important, though? They sent it to me as mov files on a disc.
These are the clip properties (is this visible? it looks so small in my window but the screenshot i took is way larger, hopefully it will expand)
These are the sequence properties:
Also, even though it says 16-bit there, it says 32-bit on the browser:

In R12 how to change concurrent output/log file name prefix?

how to change concurrent output/log file name prefix?

but i want to change change concurrent output/log file name prefix?You cannot, and I believe it is not supported for all concurrent requests -- Please log a SR to confirm this with Oracle support.
Thanks,
Hussein

How to change the output as text format in Apps R12.1.3

Hi All,
Currently iam trying to modify the Java Concurrent Program (FDExtractAndFormatting) in Batch Payment Process. This Program is generated in text format in 11i APPS. Now we are upgrading to R12.1.3. In R12.1.3 output is coming as PDF format. Here my requirement is how to change the output as text format in R12.1.3 also.
Please do the needful and suggest me.
Regards,
Jagadeesh

1. It is seeded java concurrent program. Some attributes are missing from 11i to R12. In 11i it is a text format.So i have to investgate on how to retrive those attributes in R12. What is the concurrent program name?
Have you tried to change the output and submit the request?
2. Once all are attributes are coming in PDF format. Client wants to open same output in text format as it is 11i (In R12 it is generated in PDF format).If the above does not help, please log a SR.
Thanks,
Hussein

How to change the output directory of .xml files

Hi,
There are lots of .xml files generated under
$ORACLE_AS_HOME/j2ee/home/applications/xmlpserver/xmlpserver/xml.
(ex:/usb/bipub3/oracle/oc4j_bi/j2ee/home/applications/xmlpserver/xmlpserver/xml).
I found these files are generated in the following operation;
1.Log in BI Publisher.
2.Select the Schedules tab.
I think they are kind of temp files so we will be able to delete them.
But I'd like to know how to change the output directory.
Can we change the above directory to other path?
Regards.

Why? As that may invalidate support since you configure/alter the deployment.
The location is specified in oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver.war, so you could go into the war file and alter it.

How to change the output executable file name(a.prj:(output)--- b.exe)

LabWindows / CVI： how to change the output executable file name
For example, I have an A project a.prj, I do not want to compile the output file is a.exe, but b.exe.
I will try to save as a.prj b.prj, a.cws save as b.cws
eg:a.prj ---->(output)--->b.exe
Solved!
Go to Solution.

You can go to Build >> Target Settings menu item, select Release (or Release 64) in the Configuration filed and set the name of the executable to create in Application FIle field, withouyt need to change the prj or cws filename.
See the complete description of available options here.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to change sound output?

Howdy
I recently bought a high-end toslink cable which I connected from the optical/digital out from my iMac to my receiver. The sound quality is excellent, however I noticed that all sounds now gets passed to my Hifi system all the time. The only way (I could find) to route sound to the internal speakers is by physically unplug the cable. This is really not workable in the long run as it wears down the plug and, not to mention, my patience...
So, anyone know any way to switch output to internal speakers w/o having to unplug the cable? Or is there another approach (I'm thinking Airport Express)?
/Cheers

Unfortunately, you cannot select +Internal speakers+ in System Preferences Sound pane Output tab, if you have something plugged into the audio output port.
If you got an AirPort Express, its AirTunes feature would certainly work for iTunes output. However, I believe AirTunes would only play the output of iTunes. So it would work great as long as you were only playing songs and videos using iTunes, because all other sounds will come from your computer speakers. No need to change any setting manually, after you are done listening over the stereo system. However, it would not work so great, if you wanted the audio output of some other programs to be played from the stereo system; but there seems to be a third-party solution for that issue
http://www.rogueamoeba.com/airfoil/mac/
If you have separate powered computer speakers that connect using a standard mini-jack, one alternative is to get a USB (or possibly FireWire) sound output device (if you want to be able to change the sound output setting manually). The least expensive one may be the Griffin iMic.
http://www.griffintechnology.com/products/imic/
It provides a second sound output port over USB, so it should show up as a separate choice in System Preferences Sound pane Output tab. Therefore, you should be able to use the Sound preference pane to manually switch the sound output from you stereo system to the computer speakers connected over the USB iMic.

How to change bridge output to CS5?

I cannot open a file to photoshop CS5 from Bridge. The program opens the picture using microshop photo gallery. How to I access and change its output?

Preferences > File Type Associations

How to change the output format (procedure) in the "norma 19" (CSB19)

A bank asks us that the file that currently we send to them with the data of the domicile of our busines partners (customers ISU) must have a different output format from that is currently sending, specifically ask us to change the procedure 1 to the 2 of the "norma 19" (CSB 19) --> (Data Medium Exchange)
I appreciate if someone can shed me some light on the subject ...
Where can I customize the "norma 19"?
How to change to the procedure 2?
thank you very much in advance.

Can someone help please. 1. Write a class that connects to the database, runs the proc, extracts the data and puts it in an ArrayList. This class does NOT have any gui code (none, zero.)
2. Test that class
3. Write GUI code that uses that class.
Questions about 1 and 2 are posted to this forum. Questions about 3 are posted to a forum that deals with GUIS - not this one.

How to change default output XMLP report to rtf/excel !

I used xmlp 5.6.2
The default output for report is pdf file.
Now i want to change default output to rtf or excel file
Please ! help me !

Hi Brightsea,
We customized the code in FNDRSRUN.fmb, But we are not able to get the output in RTF format.
Our requirement is to display the report output in .rtf or .xls(Not required to defaultly as .rtf or .xls).
we are getting the following error.
"The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://galaxian.bluestar.cvg0:8000/OA_CGI/FNDWRR.exe?t...
{\rtf1\ansi\deff0"
^
Regards,
suresh.

How to chang audio-output-device(s) in Windwos 8

Hi,
currently I’m working on an application that starts by changing the audio-output-device and ends with re-setting the old one.
On Windows XP I do this by changing the Registry-entry “Sound-Mapper” and it works quite well.
I hopefully assume it works on all Windows Systems from XP to Windows 7.
The background is that our program is supposed to play certain multi-channel sounds over an external USB-multichannel-soundcard and it should switch to that device on start. To actually play the sounds we use the AxWindowsMediaPlayer-Class
to integrate the Windows-Media-Player in our application.
However, on Windows 8, it is possible to set multiple Audio-Outputs and the Windows-Media-player has a setting to choose from them (under Options). I was unable to use the Registry-trick to switch the output-device and I could not find
a way to programmatically tell the AxWindowsMediaPlayer to choose the USB-soundcard as an output.
Is there a Way to programmatically(c#) ether change the audio-output-device(s) in Windos8 or to tell
AxWindowsMediaPlayer to use a certain device?
Thank you.

Hi Kristin,
I think your reply pushed me in the right direction.
The waveOutOpen-function is part of the
winmm.dll-API and I think, that API is the solution to my Problem.
Unfortunately I am stuck at this point. I tried mciSendString and mciSendComand. Both are cappable of playing sound, but I am unable to change the output Device.
This is my c# code to open a WAV-File via mciSendCommand:
MCI_OPEN_PARMS open = new MCI_OPEN_PARMS();
open.wDeviceID = 0;//this is somehow ignored
open.lpstrDeviceType = Marshal.StringToHGlobalAnsi("waveaudio");
open.lpstrElementName = Marshal.StringToHGlobalAnsi(@"test.wav");
IntPtr ptr = Marshal.AllocHGlobal(Marshal.SizeOf(typeof(MCI_OPEN_PARMS)));
Marshal.StructureToPtr(open, ptr, false);
mciSendCommand(Convert.ToUInt32(textBox2.Text),
MCI_OPEN,
MCI_WAIT | MCI_OPEN_TYPE | MCI_OPEN_ELEMENT,
ptr);
Afterwards I use mciSendCommand to start the playing of the sound, which works fine, but no matter what I enter in the “open.wDeviceID”-Line, I always get sound over
the default output.
I use waveOutGetDevCaps to get the number and kind of the output-Devices and this works fine.
Regards, Marc

How to change the colour of Background in TGA sequence with Alpha

We are going to be loading an animated name key ,created in Motion, into our clarity system for live broadcast. To do so I need to export the animated name key as a TGA sequence. Unfortunately the background for the produced files are black and leave a dark halo when the alpha channel is applied. Is there a way to change the background colour of the produced TGA files to white?

Use the rectangle shape tool. Draw a rectangle over the entire frame. In the shape tab, color it whatever you want. Export your TGA sequence.
Andy
PS: But if you place a colored bkg in your motion project that you will effectively have no alpha channel. Are they referencing the TGA's alpha?

How 2 Change of column wise o/p to row wise output in ABAP?

Hi all,
I am getting the output in column wise as normally but how can I get the ouput in row wise.in ABAP.
its urgent. can any one help me how to change the output layout?
thanks in advance,
Sakthi.C

if it is normal report .then
go through the write statents . one of that is below
Loop at itab .
write : itab .
endloop.
if it is ALV then you have to define an internal table which are the fieldds you want palce in the Row .
so that
data c type i value    '1'.
loop at itab .
fieldcatalog-fieldname   = itab-field.
fieldcatalog-col_pos     = c.
append fieldcatalog to fieldcatalog.
clear fieldcatalog
c = c + 1.
endloop.
so that the Col_pos will be increased and the Column data will be moved into Row .
reward points if it is usefull...
Girish

How to change the update rate of an Analog output in a loop

I have to generate a ramp at a decreasing frequency. I use a shift register in a "for" loop to decrease the rate of the analog output. Unfortunately, the loop or the analog output initialisation take a too long time delay..
How can I solve this problem?
Any help is greatly appreciated
Thank you

Hello;
I'm attaching an example VI that shows how to change the output rate on the fly.
Hope this helps.
Filipe
Applications Engineer
National Instruments
Attachments:
aochangeonthefly.zip ‏47 KB

How to change apple ID, How to change apple ID

How to change apple id?

From an IOS device: Settings -> iTunes & App Store -> Apple ID: (insert change here)
From iTunes: iTunes Store -> Logout of current Apple ID and sign in to new Apple ID.

How to change '2 Outputs' to '1 Stereo' in Sequence Settings

Similar Messages

Maybe you are looking for